HP Deskjet 2541: The printer cable

Similar Questions

• DeskJet 2541: brand new HP Deskjet 2541 not printing black

  Just set up our new Deskjet 2541. Impressions color very well, but when I try to print black it prints a blank page.

  Ink estimate shows that the black cartridge is about 75% full. I ran the alignment and vacuuming twice.

  I also tried to do a hard reboot by unplugging for 30 seconds and then plug it in.

  As much as I know there is no problem with black cartridge, its all just not printing.

  Help?

  Edit: I took out and put new and when the alignment page is printed there are 2 red arrows and a warning sign on the bottom half red. Upper half a blue colors only.

  It's working now. No idea of what he did, I turned it off for a whole day and when I restarted the properly printed alignment page and black now works!

• Deskjet 870 cxi printer cable

  I have a Dell Inspiron 1721 that uses Windows Vista Home Premium/SP 2.  I would like to know if my HP Deskjet 870 cxi is compatible with my laptop and if it is, I also need to know what type of cable to use.  The printer has a parallel Centronics IEEE 1284 port, for which I have the cable. my laptop has USB ports and a few other ports which I do not know the name of the identity.  If the printer is compatible, it is best to buy a cable that connects directly to the laptop to the printer or is it better to get a cable that will go from my printer to my laptop cable.

  I hope that my question and explanations are clear enough to understand.

  Thanks to anyone who can provide assistance.

  Hello! Welcome to the @danwas forums.

  I read your post about wanting to use your Deskjet 870cxi with Windows Vista. I found some information for you in the link below. It will also show you what cables to use and diagrams.

  I hope that helps!

  The driver for your product is included in the Windows Vista operating system

  Happy Tuesday

• HP 2640 series Deskjet printers: the printer does not

  Dear Sir.

  I have printer HP Deskjet 2640 series, n ° S.

  CN3AH2GHGV0601. My printer is not working as it is reported as

  Brother DCP-116C. How to connect the printer to the right? How

  reset the settings as well from fax in order to make the printer & send fax functional?

  Kind regards

  Devinder Kumar.

  Hello

  Download and run the utility HP Print and Scan Dr. link below to solve the problem.

  www.HP.com/go/Tools

• HP Deskjet 2540: The printer does not work.

  My printer does not print the page, I am sinking.  Instead it tries to download a page that I tried to download a few days ago and he has yet to recognize the page.  It was an image of the Liberty Bell, so I assumed it was copyrighted and would allow me to print and I rejected the page.  Apparently he is stuck somewhere in the printer and it does not load and therefore does not allow me to print the page that I need now.  How can I get this thing off my storage or my printer?  I watched everything I know to review and check in the printer itself.  I do not know how to remove the application printing the page because I can't find in the computer anywhere.

  If you can help me, I would be very grateful

  Thank you

  Linda Schwartz

  Hi @lindaschwartz,

  Thank you for joining the HP Forums!

  I noticed your post on how you can not print with your printer HP Deskjet 2540. I'm happy to help you!

  Please try our HP print and Scan Doctorand let me know what happens!

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope this will solve your problem!

• HP Deskjet 2540: The printer is offline

  Hello world!

  I have a printer HP Deskjet 2540, which works fine until I bought a new modem WLAN. The old modem Netgear 4 G LTE WLAN S and a new Huawei 4 G WLAN E5377. My computer and tablet work well with this new device, but the printer is not. I tried to put the modem, printer and computer off and restart them, but it did not help me. I removed the Windows Firewall, it did not help. I tried all sorts of troubleshooting and to take off a printer from the list of printers and install it again. I downloaded HP scan and print doctor without any help. I printed the list of WLANs testresults. He told me that the SSID is always the old name of modem. What I need to change this name to be again? How to do?

  Please, help me to solve this problem.

  Thanks for your help.

  Kind regards

  Anja

  Hello fellifel,

  You will need the new modems to the printer, such as the SSID and the new password information. You can either follow the procedure described in this document, to:

  http://support.HP.com/us-en/document/c03820126

  Or you can also change your SSID and password to what it was with the old modem, and printer should just reconnect. If you do it this way, you will need to change your computer and the Tablet back as well.

• The printer cable connections

  I have a printer HP Laserjet 5 p, old but works very well.   It is wired to a cable to plug into the computer.   However, I now have a new computer, with no parallel port and will need to talk to the printer via a USB port.  Is there an adapter available that will allow me to connect the cable wired to my printer on the USB port?   My printer cable's 25-pin male, so I need a 25-pin female plug connected to a USB port.   I believe that a cable (6 ft) M501-1164 is available, but that would mean I'll have 12 feet of cable between my printer and the computer.   will be led to the loss of data?   Will need me new drivers if the computer communicate with the printer via USB and not via the parallel port?

  Thanks for any help.

  Hello

  You need a cable like this:

  http://www.Amazon.com/Belkin-F5U002-parallel-printer-adapter/DP/B00000J1TS

  Kind regards.

• Brand new HP Deskjet 2541 not printing black

  My printer is several months and started not printing black and Ive went through all the alignment and cleaning.

  When I made the text color gray he printed Im assuming that it is not only the black ink

  Hi jayirvinh,

  If the guide I provided did not resolve your problem, the printer will need to be repaired / replaced. Please Contact HP phone support for assistance. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Best regards!

• HP Deskjet 2541: Test printing

  My printer prints a test page everytime I turn it on. It is a waste of ink. How can I get him to stop?

  Hi @waypylant,

  Welcome to the Forums of HP Support! I have read your message, and to see that the printer prints a page of test every time you turn on the printer. I want to help you solve this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you wish, to say thank you for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

• HP DeskJet 3511: The printer memory

  I printed a document and he lost and now I need it and is not on a computer. Is it possible to recover the memory of the printer or something related.

  Hello

  Unfortunately no, this printer does not store the files in "memory".

  Kind regards.

• HP Deskjet F2410: The printer does not print

  I have a problem with my printer after reformatting my PC.

  Product name: HP Deskjet F2410 not

  Operating system: Microsoft Windows 7 (64-bit)

  Drivers and software are already installed.

  I have the new black and color ink cartridges

  When I send command my printer does not print but in the Panel, devices and printers, in "see what's printing", everything is correct written: the Document name, status, Pages, submitted, Port. ""

  Is it possible that my printer has stopped working properly because I changed the operating system from 32 to 64-bit?

  Thanks in advance for answers

  Elena

  Hi @Elena_Kh,

  Welcome to the Forums of HP Support! I see that you have recently formatted your PC running the Windows 7 operating system and now you cannot print to your F2410 not HP's Deskjet.

  I would like you to follow the steps below:

  Please, try disabling your firewall and perform a clean boot. Now, follow the steps below:

  1. disconnect the USB key if you use a direct connection.

  2. remove the software HP Deskjet F2410 not to uninstall from the control panel of your computers an option of the program.

  3. restart the computer.

  4. make sure that all them that software Deskjet F2410 has disappeared from the list of programs, but also your HP folder listed under all programs in your Start Menu.

  5. now, go ahead and download the software and drivers for your Deskjet F2410 (DO NOT connect USB until the software prompts you to):

  HP Deskjet F2400 all-in-One series Full Feature Software and Driver

  6. go ahead and print a test page.

  7. If you are unable to print a test page, please run HP print and Scan Doctor > www.hp.com/go/tools

  -It was designed by HP to offer users troubleshooting and problems of the functionality needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  Please let me know if it was successful!

  Thank you for being a part of the community of HP. Please let me know if this helps solve the problem by marking this message as "accept as Solution" . If you need more assistance let me know and I will gladly do whatever I can to help. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

• the printer Photosmart cartridge (bus) connection cable is damaged

  Photosmart cartridge (buses) connecting the printer cable is damaged, is there a solution to replace?

  There is not a solution to replace the. You can call the HP Support (1800-474-6836), and you may be eligible for a replacement printer.

• DeskJet 1055: Custom printer printing, Dim. power light and back to normal

  Hello

  I bought this printer in America and I took it with me to Brazil, where I live now.

  The scanner in it works very well, and also the test page prints fine.
  
  But when I try to print my own pictures, he used impression. Its like the printer simply ignores the document. My computer tells me the print job, or sometimes didn't display any status at all in the print list. And the power light fades and returns slowly to normal.

  It has new cartridges, and I can't seem to make it work. Function print and Scan Dr. I have all possible updates and its all supposed to work very well.

  Can you guys please help me? I contacted the support to the Brazil, but told me that I should talk to HP WE.

  Its a shame that the product does not work, this printer has been barely used...

  Thank you

  Hi @Laridk,

  Welcome to the Forums of HP Support!

  I see that you are unable to print to your HP Deskjet 1055 printer. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand that the printer is capable of printing a test properly page. This seems to indicate that this isn't a hardware problem and it is more likely to be software related problem.

  Due to the slight dimming, I would like to do a hard reset to see if that will solve the problem.

  • Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  • Reconnect the power cable to the output of the printer and the wall, and not a surge protector. This ensures that the printer is full on and can help this situation.
  • Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Please confirm that you have the printer connected to the USB 2.0, rather than a USB 3.0 port.

  In addition, please try the steps in these guides:

  • HP printers -print jobs stuck in the queue (Windows)
  • HP PC - Troubleshooting connections USB (Windows 7)
  • HP printers -printer 'offline' State message (Windows 7)

  In addition, you have regionalized the printer or do you still use the ink cartridges, you bought the United States?

  Here is more information on this topic: HP printers - find and install the cartridges after moving to another country.

  When you need to use ink cartridges purchased at the Brazil. The printer should be regionalized. When this happens, contact HP.

  Contact HP for service in all countries except Asia-Pacific.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Deskjet 832 C: printer

  My 832C printer has worked fine until what I've upgraded to Windows 10 and maybe it's just a coincidence.  It prints well, but I heard a terrible cry, a few seconds after the last page has printed while something is set to zero.  Anyone know what it is and how to fix it?

  Hi @bpd2,

  Welcome to the Forums of HP Support!

  I understand that you hear screeching noises of the printer when moving back in postion. I will definitely do my best to help you.

  There could be an obstacle, dirt or a simple malfunction causing the noise.

  I would like to do a hard reset to see if that will solve the problem.
  Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  This ensures that the printer is full on and can help this situation.

  • Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  I would like to try the steps in this guide, the flashing of the lights on the printer HP Deskjet 800 series. This guide covers many different issues, but it might be useful for you.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP Deskjet D2660: All prints gives blank Pages

  Hello. We have long used the faithful D2660 to print labels for shipping mostly in black and white. We recently used not printer in over a month, and upon his return, is having problems printing.  It was unusually hot in England during that period and may have caused the problem is perhaps remarkable?

  All attempts to print blank paper to return. The printer goes through the usual movements of printing, but it seems that there is no ink coming out of the cartridge.

  I tried...

  • Insert two offical cartridges with ink left and who does not. The first two were seen correctly make the ink and the third was also properly don't not have ink. It can identify how much ink is left in a cartridge.
  • The toolbox using automated "To clean the print cartridges", "defamation cleaning Page back" and "Test Print-document". Nothing has changed and it printed a blank page.
  • Move the printer cable
  • Grayscale (who oppose black ink only) and checking the size of the page.
  • I have already used the printer on Ubuntu. I started a live CD and tried to print from there, but again without success.
  • Installed the latest drivers from HP.com. It does not appear to say something wrong with the printer.

  Hello @ZackR,

  Welcome to the Forums of HP and thanks for posting!

  I want to help you with the problem of blank print you are having with your HP Deskjet 2660 printer.

  Thanks for the detailed description of the problem and the steps you have taken to try to solve it. Looks like the ink in your cartridges can have dried in the hot season (this is especially likely if you have had their printer output).

  I would recommend looking on the steps in this document, to see if there is nothing, you may have missed:

  HP Deskjet D2600 series printers - troubleshooting print quality issues

  If the problem persists, I strongly recommend replacing your cartridges, because it seems that the printer itself works fine.

  I hope this helps!