HP Deskjet 3520 - 0xb048a200

I have a problem with this printer.
First of all that this isn't my printer that I'm just trying to get it working again.

The printer is connected to a PC with 64-bit Windows 8

The problem started after I installed a new cartridge. It worked fine with the new cartridge.
The next day, the printer was turned on this message was displayed in the screen of the printer - 0xb048a200
Else going on nothing, I can not print, scan or even copy something.

I tried to flash the printer with the latest firmware. The computer does not recognize the printer.
Flashing the printer is something that I already did because this printer has a bend on the question of food.

What can be done about this problem.

The problem was a defective HP cartridge. Why can't they put something like that in the manual!

Tags: HP Printers

Similar Questions

  • poor quality of black ink HP DESKJET 3520

    I'VE JUST SET UP MY DESKJET 3520 TRIED TO PRINT MY DOCUMENT FIRST AND BLACK IS VERY BAD QUALITY, SO SMALL THAT IT IS BARELY READABLE, IVE TRIED TO RE PRINT 5 TIMES AND STILL THE SAME... CAN SOMEONE HELP ME? THE BLACK INK CARTRIDGE IS DATED...

    I've sorted it my self, I took the black cartridge and wipe the tip with paper, the was not sink much ink was out at first, but more I wiped the most ink began to flow,
    Made a few test prints and now it seems in good condition.
    Maybe a blockage on the cartridge

  • HP Deskjet 3520: Printer uses a different color than the original

    Although I have a lot of little black ink low on color my impressions are coming in red now in yellow instead of black and Red

    Hi @Deborahdebster

    Welcome to the Forums of HP's Support.   I understand that when you print using your printer Deskjet 3520, a problem of print quality with regard to the colors.

    I've included the document to solve the problems of quality Print to the HP Deskjet 3520 and HP Deskjet Ink Advantage e-all-in-one 3520 Printer series . There the steps you want to fix the problem of print quality.

  • PRINTER DESKJET 3520 IS PUT ALMOST NO INK ON PAPER BLACK

    DESKJET 3520 ON WINDOWS 8 (64-BIT) ALMOST NO BLACK IN ONLY IS HOISTED ON THE PAPER WHEN I PRINT.  I USED THE HP DOCTOR. I DOWNLOADED THE LATEST VERSION OF THE DRIVER. I CLEANED THE VENT OF THE CARTRIDGE. I REPLACED THE CARTRIDGE WITH A NEW CARTRIDGE BLACK... ALL HELP IS IS FACT.  WHAT ELSE CAN I TRY?

    Hi cojuca,

    Have you called HP?  (1-800-474-6836 for the Canada and the United States, or you can Contact HP worldwide.)

    If so, what was the outcome of the appeal? If you do not call, please do and let me know how it goes.

  • Reconfiguring a printer wireless deskjet 3520 on the new network.

    Hello... I bought and installed my deskjet 3520 on my wireless network and 2 laptops about 1 week ago.

    Everything was fine but then a PC started refusing to connect to the network.

    Technical support to the Belkin unhooked all the network and uninstalled everything... then reconfigured a new wireless network. Call Net2.

    Access both the web very well on Net2 PC but the printer connects is no longer makes sense if he still thinks I'm on Net1.

    So... the question is... What is the best way to get the 3520 to be accessible on Net2 on BOTH computers.

    I didn't want to screw up whatever it either so have not tried whatever it is me again!

    I'm reasonably notified have the installation disc. Win7 operation on both computers. Wired ethernet connection available and can connect each PC with a USB stick if necessary... but really want to use both wireless. I also have original HP print and scan doctor installed from the installation process!

    Hope that helps and thanks in advance!

    No problem!

    When you post again, I'll check in.  I wish you the best in getting the printer is connected to the new configuration of the network.

    If you need assistance I am more than happy to help.  Have a wonderful and safe trip!

    Jason

  • HP Deskjet 3520: Windows 10 update, failed to refresh an ink

    Since the update to Windows 10 I lost the HP page that allows me to update the ink, scan to printer, etc.  How to do that now?   Your help will be greatly appreciated.  Thank you.

    DiGill

    Hi @DiGill,

    I saw your post about software problems you encounter since the upgrade to Windows 10 and I would like to see if I can help.

    First, you must consider the information contained in these resources.

    If you printer software was installed before your upgrade, I try to uninstall the software completely and then reinstall it by using the most recent driver available on the HP Web site. Here's how to clean all the drivers of your computer.

    I recommend referencing the steps described in this document to make sure that you haven't missed anything whatsoever;  Uninstalling the printer software - use as a rough guide, but the steps for Windows 8 should be pretty close to Windows 10.

    You can also delete files using disk cleanup - take care to put check marks in selection boxes when it is available. (Once again Windows 8)

    Software drivers can hide other places would be in your device manager.

    To open Device Manager:
    1) enter the Device Manager in the search field.
    2) click on Device Manager.
    (3) you can click on View, in the upper part of the windows, click Show hidden devices.
    (4) to develop the types of devices and check for any pilot associated with your printer.
    (5) to remove a device from Device Manager, click on the name of the device in the list and then click Uninstall.

    For more information, see for Windows Device Manager information 8/10.

    Download the newest software package here; Drivers and software features full printer e-all-in-one HP Deskjet 3520.

    Or download the direct link here.

    Then look for the updates of Windows; Drivers and software with Windows Update (Windows Update 10, 8)  

    Please let me know if any of these steps has resolved your problem, or if there is anything else I can do to help.

    I look forward to hear from you!

    Thank you

  • HP Deskjet 3520 - will not print black text

    I have a Deskjet 3520 printer.  I installed a new HP ink cartridges, color printing works fine, but the black does not print.  Even if I force black only in the preferences to print gray nothing comes out.  The print head moves back and looks like it's printing, but the page is empty.  I also ran the cycle of cleaning heads.

    Help, please!

    Cheers, Ben

    Hi all

    My question seems to get fixed after I ran a printer 'clean' options available.

    If you guys have this problem, why not try to clean?

    Concerning

    MY YEO

  • DeskJet 3520 cannot connect to the internet

    I bought a new Deskjet 3520.  I set it up on the wireless network, and everything seems fine.  However, as I'm trying to implement Web Services, he told me always impossible to connect to the internet, it does not say why.  I have the correct key in place, and everything else on the wireless can connect to the internet.  I have uninstalled/reinstalled software... rebooted the router, restarted the printer, still no go.

    I understand that you are not able to connect to web services.  I would follow the steps below.

    1. get the IP address of your printer.

    2. Enter the printer's IP address in a browser.

    3. Select the tab network at the top of the page.

    4. on the left, select network.

    5. Select Network (IP) address

    6. select manual DNS server

    a. manual Preferred DNS should read 8.8.8.8

    b. alternate DNS server should read. 8.8.4.4

    7. Select apply you could get a fair warning select OK.

    Let me know how it goes.

  • HP Envy: Deskjet 3520 OXCO260000 TRTHREADSTOP C error Code

    My deskjet 3520 printer all in one is indicating an error OXCO260000 TRTHREADSTOP C on the display of the printer code. I was not able to find a solution for this.

    Hello and welcome to the HP @Peachy2community.

    I understand that you get an error message 'OXCO260000' on your HP Deskjet 3520. I'll be happy to help you.

    Here is a link that will guide you through the troubleshooting steps for the error message you receive.

    The system failure HP printers - print head problem, ink, ' 0 x... ' Display the error

    Please, try the steps and get back to me with the results.

    If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

    I hope this helps. Have a great day.

  • Black original ink cartridge HP 27 won't crack of HP Deskjet 3520

    The shop said it was compatible. However, the slot is smaller than the cartridge.

    There are two printers with this number, but one is called the Deskjet 3520 e-all-in-one who takes ink 564.

    The oldest 3520 takes ink 27.

  • DeskJet 3520: new splash black ink cartridge ink

    I just replaced my 564 to 564XL black ink cartridge. I received a message that the cartridge has been installed correctly. but when I tried to print I got a blank page. When I looked inside the printer, I saw that inner right before the printer is filled with fresh touches of black ink.

    I went on troubleshooting hp including cleaning printer head site and it did not help.

    Hey @idogold,

    Welcome to the Forums of HP Support!

    I understand that since the installation of a new black cartridge for your HP Deskjet 3520 e-all-in-one printer prints blank pages and you may have noticed some residue ink inside your machine. I would like to help you today to this question.

    Now, residue of ink inside right of your machine is completely normal behavior. For more information on why this product please click here.

    However, I'm concerned by the printing of blank pages. To begin troubleshooting can I please have you click here. When the support document opens can I please have cross you Solution three and four. This includes all sub-steps under two listed Solutions.

    Please reply to this message with the result of your troubleshooting. Good luck!

  • HP Deskjet 3520: Unable to connect to DJ3520 through remote AIO on iPhone after updating to IOS 10

    Since upgrading to IOS 10 on my iPhone 6plus, when I add my printer (HP Deskjet 3520) as my connection in the settings to use remotely AIO to print/scan I get the error message "No internet connection" in the application of remote hpprinter AIO. My internet connection is on, the blue light for the internet is on but it connects to the printer because he thinks that the printer requires security for the internet. I tried uninstalling/reinstalling AIO remote and also refreshing to the Internet is done everything to nothing. Help would be very appreciated!

    Well, after research through the forums, and not finding the correct information, I went to my router and found a setting "enable wireless isolation" which does not allow anyone on the network to see any other computer. Once I removed this setting, I solved all my last 6 months of frustration and not being able to print!

  • not connected to the internet deskjet 3520

    First day instaled deskjet 3520 printer all-in-one on the internet ok

    Two days does not connect to the internet.

    My internet connection is ok for my laptop and mobile

    Hi rubyjim,

    Thank you for the additional information.  I was very surprised to see the number of disconnects the printer has had in the last 24 hours.

    According to the information provided, I'm surmising that you stopped in step: evaluate the wireless network Test page according to the wireless network Test page you are correctly connected to your network.  In this step you ask to change the change to your wireless router, you please begin at this stage and test wireless printing?    If you are unable to print please continue with the remaining steps.  For ease of reference, I have included a list of the document printer does not maintain the wireless connection again.

  • HP Deskjet 3520 all-in-one: I installed the HP utility to scan, but the 'Edit analysis jobs' button is grayed

    I installed the HP utility to scan from my HP Deskjet 3520 to my Mac Book pro, but the "edit scan tasks" button is grayed out. I can only scan one page at a time, but one I want to scan multiple pages

    Thanks for the reply back @cjbd,

    You are able to open the HP scanning software when you perform a search from the Mac?

    You try to scan several pages from the printer to the Mac or from the HP scanning software?

    You should be able to open the HP scanning software and edit everything from there.

    Normally, you can select PDF to scan in a single file multiple documents if that's what you try to do.

    Because this model only has a dish, you must be notified to scan another page.

    Here is a document for digitization of the control panel of the printer: HP Deskjet 3520 e - all - in - one and HP Deskjet Ink Advantage 3520 e-all-in-One Printer Series - how to perform a scan: from the control panel.

    If the HP scanning software does not work, you will need to uninstall and reinstall the software again.

    I handed the document to uninstall: Printers HP - uninstalling the software of the printer (Mac).

    Here is the link to the drivers: HP-inkjet ink-SW-OSX - Mavericks_v12.34.40.dmg

    Please get back to me. Thank you!

  • HP deskjet 3520 scan copy main: print in black ink only

    does always change to print in black ink only, or is it possible to save it so I don't have to go properties, advanced to change

    Thanks robert

    Welcome to the HP community @robert3591,

    I read your post want to print in black ink only, from your Deskjet 3520 and how, you do not select this option, every time you print from your Windows Vista system.

    I would say to change the option to print in black ink only from "Devices and printer" to contain the parameter always print in black. This is a great detailed post from my colleague @X-23 , which shows all the instructions and screenshots:

    Re: I want to only print in black ink

    If there are any questions or problems, please let me know! I hope this helps.

    Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!

Maybe you are looking for

  • Satellite A200-28 s becomes black when connection Vista

    I have a Toshiba Satellite A200 - 28 s computer laptop windows vista home edition.Recently, when I have the logon screen turns black. Thank you

  • HP 250 G4: Webcam in HP 250 G4

    I have another problem. Why when I talk on Skype, my very bad quality of web camera? You may need to install the driver? Laptop bought 10 days ago in the obviously stupid shop vendors. Thx for SNA.

  • Internet configuration for windows media player

    When I try to play a song that I bought some time ago in WMP version 11 running on the operating system to Vista SP2, in the lower right corner, it says «Download rights of use...» "Then I get a pop up window that says:"Windows media player is not co

  • (Redirected) New Dell website

    I have laptop Dell 2005 model PP20L Inspiron 6400 when I enabled get the Dell logo & marker of time, then the following message from the screen to the left corner "NTLDR is missing Press any key to start" that copy just this message vertically to the

  • Obligation to specify HP pavilion dv6 adapter 6c02tx

    Hi guys,. I lost my hp pavilion dv6 6c02tx adapter... I need to buy a new one (may b chineese) market... If someone of you who use this model pls informed me the specification (for example... output & input voltage n & watt other things) of the adapt