HP Deskjet 3520: Wireless connection

Similar Questions

• DeskJet 3520 cannot connect to the internet

  I bought a new Deskjet 3520.  I set it up on the wireless network, and everything seems fine.  However, as I'm trying to implement Web Services, he told me always impossible to connect to the internet, it does not say why.  I have the correct key in place, and everything else on the wireless can connect to the internet.  I have uninstalled/reinstalled software... rebooted the router, restarted the printer, still no go.

  I understand that you are not able to connect to web services.  I would follow the steps below.

  1. get the IP address of your printer.

  2. Enter the printer's IP address in a browser.

  3. Select the tab network at the top of the page.

  4. on the left, select network.

  5. Select Network (IP) address

  6. select manual DNS server

  a. manual Preferred DNS should read 8.8.8.8

  b. alternate DNS server should read. 8.8.4.4

  7. Select apply you could get a fair warning select OK.

  Let me know how it goes.

• Deskjet 3520 wireless configuration

  I have a new Deskjet 3520 all in one and I'm trying to get the ity configuration. I have the Mavericks 10.9.2. I downloaded the software and drivers on the HP site. I installed the software successfully and the HP utility has started, but it's stuck on the first step in trying to find the printer. It has been tried for almost an hour.

  Instructions on the HP site say to use "Auto Connect Wireless HP", but this isn't an option.

  Can I configure the device manually? The printer itself doesn't have an IP address, and the wireless light flashes. This configuration does not work why?

  Instructions on the HP site for my printer and operating system did not work, so I had to connect via USB to set up wireless printing. Who succeeded. So for someone else with this configuration, trying to follow the instructions from HP I suggest just connect via USB temporarily.

• DeskJet 3520: Simultaneous connection to the router wifi and DJ3520.

  How can I set up the printer so that I don't have to unplug my befor internet connection I can print.

  Well the best place for that information is the User Guide that you got with the printer or download from the page of full HP support here.

  http://support.HP.com/us-en/product/HP-DeskJet-3520-e-all-in-one-printer-series/5162504/model/5162505/manuals

  Whatever you are looking for is here.   Page 35 of the user's Guide says it all.

• Deskjet F335 wireless connectivity

  The Deskjet F335 has wireless connectivity?  If so, how can I connect to a wireless network?

  Sorry, it is not a wireless printer.  Some wireless routers have ports USB supported printers (like the Apple Airport series some D-link and Netgear routers as well).  That would be an option.  However none of these supports scanning, printing only.

• Printe all-in-one Deskjet 3520: cannot reconnect my printer all-in-one Deskjet 3520 wireless network

  Hello!

  I'm having a problem to reconnect my printer on the wireless network. I unplugged for a few days and now it won't connect to the wireless network. I get the following message on the small screen on the IP of the printer: not connected SSID:N / A. I hope you can help me solve this problem.

  Best regards

  Mina

  Hi @Mina85 and welcome to the Forums of HP!

  I see that you are having connectivity problems.  I would try to help!

  I recommend you to perform a power reset.   Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I also suggest this document on Center of troubleshooting wireless printing.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• DeskJet F4580: Deskjet F4580 wireless connection problem

  I installed my old F4580 on my new HP laptop but you can print using only the USB cable. The printer is also set up on my old computer and works via wifi with no problems. I should add that I had many problems to install this printer on my new HP laptop, but thanks to this forum I found the link to the drivers who eventually worked and managed to install it.

  With the help of HP Support Assistant I checked the driver updates, but he found none, which should mean that I have the latest version.

  Do you have suggestions for me how to fix it?

  Thank you

  Hello @Qala!

  Thanks for posting on the HP Forums!

  I would be happy to provide you with some suggestions which should hopefully solve the problem of printing wireless on the new computer.  If the printer works wirelessly to a computer, then it should work other wireless.  I see that you have all software installed for Windows 8.1 printer but you can't print USB.  It is possible that a firewall in the Windows 8.1 operating system blocks the wireless printer.  This happens occasionally with new systems.

  I recommend to download HP Print and Scan doctor.  With printing and scanning doctor, you can temporarily disable the firewall that may block the printer from the computer.  If the printer is found, you need to turn your firewall on back to make sure that your computer is blocked.

  To download the print and the doctor Scan click here: print and Scan Doctor

  To temporarily turn off the firewall:

  1. Download and open the Print and Scan Doctor
  2. Click on 'Network' at the top of the window
  3. Click on 'firewall troubleshooting. "
  4. Select the firewall and disable

  Launch the software HP again to see if the printer is located.  If the printer is not found, then you want to communicate with your provider of firewall while allowing access to the printer to the computer.

  

  To turn on the firewall:

  1. Open the print and Scan Doctor
  2. Click on 'Network' at the top of the window
  3. Click on 'firewall troubleshooting. "
  4. Select the firewall and select

  If please, after back and let me know how it goes!

• Reconfiguring a printer wireless deskjet 3520 on the new network.

  Hello... I bought and installed my deskjet 3520 on my wireless network and 2 laptops about 1 week ago.

  Everything was fine but then a PC started refusing to connect to the network.

  Technical support to the Belkin unhooked all the network and uninstalled everything... then reconfigured a new wireless network. Call Net2.

  Access both the web very well on Net2 PC but the printer connects is no longer makes sense if he still thinks I'm on Net1.

  So... the question is... What is the best way to get the 3520 to be accessible on Net2 on BOTH computers.

  I didn't want to screw up whatever it either so have not tried whatever it is me again!

  I'm reasonably notified have the installation disc. Win7 operation on both computers. Wired ethernet connection available and can connect each PC with a USB stick if necessary... but really want to use both wireless. I also have original HP print and scan doctor installed from the installation process!

  Hope that helps and thanks in advance!

  No problem!

  When you post again, I'll check in.  I wish you the best in getting the printer is connected to the new configuration of the network.

  If you need assistance I am more than happy to help.  Have a wonderful and safe trip!

  Jason

• HP Deskjet 3520: Unable to connect to DJ3520 through remote AIO on iPhone after updating to IOS 10

  Since upgrading to IOS 10 on my iPhone 6plus, when I add my printer (HP Deskjet 3520) as my connection in the settings to use remotely AIO to print/scan I get the error message "No internet connection" in the application of remote hpprinter AIO. My internet connection is on, the blue light for the internet is on but it connects to the printer because he thinks that the printer requires security for the internet. I tried uninstalling/reinstalling AIO remote and also refreshing to the Internet is done everything to nothing. Help would be very appreciated!

  Well, after research through the forums, and not finding the correct information, I went to my router and found a setting "enable wireless isolation" which does not allow anyone on the network to see any other computer. Once I removed this setting, I solved all my last 6 months of frustration and not being able to print!

• not connected to the internet deskjet 3520

  First day instaled deskjet 3520 printer all-in-one on the internet ok

  Two days does not connect to the internet.

  My internet connection is ok for my laptop and mobile

  Hi rubyjim,

  Thank you for the additional information.  I was very surprised to see the number of disconnects the printer has had in the last 24 hours.

  According to the information provided, I'm surmising that you stopped in step: evaluate the wireless network Test page according to the wireless network Test page you are correctly connected to your network.  In this step you ask to change the change to your wireless router, you please begin at this stage and test wireless printing?    If you are unable to print please continue with the remaining steps.  For ease of reference, I have included a list of the document printer does not maintain the wireless connection again.

• DeskJet 3520 does not connect to new router

  We have a Deskjet 3520 that worked very well with our old clumsy router Belkin. However, we passed just a router ASUS RT-AC66U, and now the printer doesn't seem to be able to communicate with her. We are running Windows 8 on our desktop. Hard, the office is connected to the router via an ethernet cable. How do we get our 3520 in network again?

  Hello

  Please follow the instructions below to fix:

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

  Kind regards.

• Wireless Deskjet 3520 on broad-band fiber

  Hello friends,

  Currently I have my Deskjet 3520 multifunction wireless installed on my home network, (a laptop and a Deskjet) and am upgrading to a facility broadband fiber this Monday, July 8.

  The upgrade will involve the use of a new brand high-speed fiber modem/router, and I would like to know if I have to completely reinstall my all-in-one Deskjet 3520 to establish a wireless network between my Deskjet and laptop (Windows 7 OS), or can I skip some steps in the manual for the installation of the Deskjet printer?

  Any guidance would be appreciated. I look forward to your responses.

  Thank you!

  In theory, if you give your new network (router) namesake exact network (SSID), type of encryption (WPA, WPA2, etc.) and password for the printer should re - connect without problem.  If none of this is even the slightest different you will need to re-install the printer.

  If you use Windows, you will need to go to start > all programs > HP > [your printer model] > IP update.  If you use a Mac, of course, there will be no such problems.

• HP Deskjet 3520 cannot print wireless!

  Hello

  just bought a HP Deskjet 3520, but it cannot print wireless!

  the printer is properly configured and connected to my wireless network, I ran a page of test result of wireless network and all results are pass.  but when I tried to print somethings of my 64-bit Windows 7 notebook, which is connected to the same wireless network, the print job is broken.  I also tried to open the built-in Web server, but did not as well.  It cannot display the EWS page.

  I don't really know what went wrong, please kindly help me provide information to solve these problems.  Thank you very much.

  Digitization is when you can place the paper on the glass and the SCANNER to the computer. The document that was on the screen of the printer, is now available on the computer. Who is scanning.

  You could also click the icon of the printer (Solution Center) on the computer. Choose Scan of the computer.

• My iPad and iPhone will be printed using AirPrint on my printer HP Deskjet 2540 for about 40 minutes and then will not be able to find all of the available air printers. No idea why.  The deskjet printer shows that there is a wireless connection.

  My iPad and iPhone will be printed using AirPrint on my printer HP Deskjet 2540 for about 40 minutes and then will not be able to find all of the available air printers. No idea why.  The deskjet printer shows that there is a wireless connection.

  Hi Mpsfeldt,

  Thank you for using communities Support from Apple!

  Your question, it looks like you are only able to use AirPrint sporadically. We know that situations of this kind can be frustrating, but we are here to help.

  To begin the process of solving problems, I suggest you to read about the section If you can not print on your printer AirPrint in the following article.

  On AirPrint - Apple Support

  Best!

• HP Deskjet 3830: Printer connected by wireless worked well until someone joined the home network - looking for password now!

  I created my HP Deskjet 3830 yesterday and it worked on wireless connection. At no time was I asked a network security key.

  A colleague joined today to the home network (yesterday I was myself), and requested a key security network - to my surprise I was so.

  I put my wireless network password, and he says that it is evil. I used HP Print and Scan doctor to confirm the password (I guess that's the same thing as a "security key" - it was OK, but I keep being told it's wrong.)

  It is porrible that it is because my setup yesterday wasn't network but without straight wire? Or want to say I'm wrong?

  Other: since yesterday I have not changed anything or even restarted.

  Reset the printer to the default network. Now plug it back to your routers SSID with password. Try now. If Direct wireless is enabled in the printer, turn it off.