HP DeskJet 3545: HP Deskjet3545 is no longer black print

Similar Questions

• DeskJet 3050 j610a - new router; no longer can print wireless.

  Hi all. Am 66 & new to computers and the forums. I'll try to be brief, but I want to describe my problem as precisely as possible. I have a laptop Toshiba Satellite C655, HP3050 j610a printer wireless, Windows 7, 32 bit OS and Google Chrome is my browser. For the past 2 years I had wireless printing problem with my Westell 7500 router. Then my ISP (Verizon) gave me a D-Link 2750 B. My laptop connected to the internet via my wireless right now, but the impression is only possible via the USB port.

  Reads the error message: "your printer could not join the wireless network - Mac address filtering can be enabled on your wireless router. (I checked & it is not). Then I printed a wireless network Test report and the header reads as follows: "your HP printer cannot find your access point. Verify that your access point is turned on. Make sure that your network (SSID) HP printer name exactly matches your network name of the access point (SSID). If they do not exactly match, run wireless network setup to set up your HP printer. In addition, under the Diagnostics summary, it reads: 'Network Name (SSID) Found = FAIL.

  What I've tried so far: uninstall & reinstall all of the HP software (Via the website of hp), router cycle power & printer, printer reset to factory, looked inside the router & all seems OK. I did a search on Google for this problem and got more confusing and complicated explanation I was looking for... all the way to subnet masks; whatever it may be. I'm at the point now (and please correct me if I'm on the wrong way) I think I should try manually turn on the network news in the printer or get an IP printer. Neither of which I know how to do.  Is there a way to look inside my printer settings I look inside my router settings... and how?

  In my opinion, it has become much more complicated than necessary and I'm probably overlooking the obvious here. Any help would be greatly appreciated, but please respond to me as if I was in 3rd grade! (Although as a student of 3rd would probably have figured this out already)!

  Thank you

  Larry

  You can look in the printer for the first time after it has been reset only.

  On the front of the printer: Wireless > default settings.  Now, on your PC connect wireless network printer that starts with "HP."... »

  Print a network Test Wireless in the menu on the front of the printer wireless to get its IP address.  Type the address in the browser address bar to reveal the internal settings of the printer.

• DeskJet 3545: no wirelees

  I would like to REST HARD / FACTORY RESET of the printer. advantage of hp deskjet 3545.

  Please let me know how to do it.

  In doubles, responded.

• Impossible to install my new HP Deskjet 3545 printer all-in-one wireless

  I bought the printer HP Deskjet 3545, printer all-in-one wireless on August 13, 2014. When I tried to install the printer for USB connection after downloading the software from the CD provided with the product, it displays the message... "" Cannot install hardware, module HP Deskjet series 3540 is not found. ""  Help, please

  Problem solved.  Problem was with my operating system.  Upgrading to windows 7 and the printer is installed. Thank you all.

• HP Deskjet Ink Advantage 3545: Printing with hp deskjet 3545

  I am unable to do a duplex with my printer is HP deskjet 3545. Please guide me with adequate instructions according to my OS is Windows 8.1 (64-bit).

  Hello

  Please follow the steps in the link below to fix the problem:

  http://support.HP.com/us-en/product/HP-DeskJet-ink-advantage-3540-e-all-in-one-printer-series/5285945/model/5285992/document/c04402029/

• Paper in HP DeskJet 3545 alignment.

  HP DeskJet 3545 should have a slide in the tray paper, which could be pushed gently to keep or hold the front edges of the papers lined up to be sucked by the printer. I have a misalignment of the edge to the line of printing paper & need to reprint again & again. I hope I could explain.

  Any suggestions?

  If you performed the steps listed in the documents that I sent you, you would see that I sent them because they have you inside and clean the machine, there may be a build up of ink, dust or and obstruction on the reels, which is causing the lack of alignment trying to pull in the document.

  If you are still unable to have paper properly pull in, I suggest that you contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

  Yes! you have a great idea - please do not hesitate to inform HP here: Connect with HP

  Thanks again,

• during installation of HP DESKJET INK ADVANTAGE 3525 does not recognize original black print cartridge

  Hi all

  during the installation of my new printer HP DESKJET INK ADVANTAGE 3525 I discovered, that the printer does not recognize the new black ink cartridge. The black cartridge, as well as the other colours, is original and it was packaged with the printer.

  Thanks in advance for your help and have a nice day!

  Hello @Hugh_G,

  Welcome to the HP Forums

  I'm sorry to hear that your printer does not recognize the black cartridge, and I am happy to help you solve this problem!

  Are getting you any kind of error message about the cartridge? If this is the case, please follow this ink cartridge problem: "Not compatible ink cartridge" or "Ink cartridge must be replaced" message for HP Deskjet 3520 e-all-in-one and HP Deskjet Ink Advantage e-all-in-one 3520 Printer series document and, hopefully, the printer will recognize the cartridge after these steps.

  Maybe that's not the question if you thinking maybe that black ink is not printing? If this is the case, please try these steps printer prints blank Page or not printing black or color ink for HP Deskjet Ink Advantage and Deskjet 3520 e-all-in-one printer series for a possible solution

  I would like to know if these steps help and what happens after trying them and I hope that we can get things working for you!

• LaserJet P1102W: Computer is no longer grateful printer

  My computer won't recognize is no longer my printer.   The printer is connected by USB.   I've tried change the USb port and you use to a diffferent cable.

  Hey there!

  Finally, blue light should stop blinking as this light means the printer is trying to connect to a network. You can try a reset (see below).

  Turn the printer off, press and hold the wireless button and cancel (x button) while turning the printer on and do not release both buttons until the printer stops making the noise.

  Afterwards, you should be able to connect, follow the steps in the guide I posted earlier and also try suggestions "other steps to try" .

  If you are still unable to connect, contact HP directly to discuss a replacement printer. I'll leave their details below.

  Good luck

  Click on the "Accept as Solution" If the issue reached a resolution! Hit thumbs up below like my post or show thanks to me to lend a hand!

  HP technical support are available by clicking on the following link:

  http://h22207.www2.HP.com/us-en/?openCLC=true

  (1) once the page opens, please select the country in which you are located. Then enter your model of HP on the right number.

  (2) then choose "Contact the Support" tab at the top and scroll to the bottom of the page "HP Support - contact" to fill out the form with your details.

  (3) Once finished, click the "Show Options" at the bottom right.

  (4) Finally, scroll to the bottom of the page and select "Get a phone number." A file number and telephone number will now fill for you.

• HP Officejet Pro K8600: HP Officejet Pro K8600 - is no longer connected, print - driver lost?

  DISCLAIMER: I understand that it is a large display. Please, please read it carefully before suggesting the diagnosis. While I'm not an advanced programmer, I am very computer and am usually able to solve minor to somewhat advanced questions. However, I've exhausted my knowledge and my skills to no vail here...

  CLARIFICATION:

  I use a processor 3 GHz Intel i7, 12 GB of RAM on Windows 7 Pro 64-bit (Service Pack 1) OS. My printer is a HP Officejet Pro K8600 - it is NOT an all-in-one printer. This is a printer large format, single tray. I have Avast Home Free edition runs on the PC as well as SBSD and widows firewall ACTIVE. In my Panel "Devices and printers", it also shows that I have the following 'printers' installed: Adobe PDF (copy1), Fax, Microsoft XPS Document Writer, PrinterShare, Quickbooks PDF Converter, QuickBooks PDF Converter 3.0 and send to OneNote 2010. Windows Update has been on 'Manual' which allows me to choose which updates to install and when. However, at some point during this troubleshooting - I for 'auto' changed, so I don't think there are a few updates to Windows that has been installed automatically.

  Just for additional notation, I also use a double 4 operated by two NVIDIA graphics cards monitor display monitor. Not that it should be any problem because I use this configuration for some time. However, I was surprised to find that some software does NOT support more than two monitors. Very strange.

  SCENARIO:

  This printer is about 6 years old. It has been a great printer and I rarely had problems with it apart from maintaining normal jet ink and minor errors. I have been successfully connected to the current computer at least 2 years. Once again, never problems. The printer is connected directly to the computer using a USB standard cord - less than 12 feet long. Printer is also shared on the home network and I can usually print using my laptop in the network without any problems. Printer is on a shelf on the wall above my workstation.

  QUESTION:

  PART A: Two days ago, I was about to print a simple, small Photoshop CS3 PDF image. It is a daily task - size of the document was less than 11MB. The printer has not initialized as usual - I noticed that the light flickered.  But the printer is trying to print (print head not move not, does not feeding paper, no noises). So I tried to follow the standard troubleshooting methods by which is obvious - restart the printer. The flashing light has not disappeared. I have checked for jams, reinstall the carttridges and opened and closed all the doors - and then restarted the printer again. I also restarted my PC at the moment. Aware of the printer light continues to blink. I then the 'X' button on the printer while the printer power off and power it back up. This (I believe) ran a diagnostic standard and print a test page. Everything seemed normal on the print. Power led is no longer flashing. I have Open the printer only and cancelled all documents -removed something that was there. Schecked double for all other printers (I) with the documents in the respective queues - nothing found. Also noticed that the printer status is "Offline."

  PART B: Now, I decided to print a simple Word document. This time the printer did nothing. No sounds, no lights flashing and no movement of the print head. I decided that I was going to unplug the USB from the PC and plug it into another USB port. This caused Windows to try to 'install' the printer drivers - I assumed that they would be fair here. However, I got the following popup status of driver-

  

  This, of course I worry about. Again, I have anoccupant to print a regular Word document. Printer has not responded at all. So I checked the devices Panel and printers and found that the printer has been listed but showing "status: troubleshooting needs. I right clicked on the printer icon and clicked on "Troubleshooting". Then I got this-

  

  Then I clicked "Apply this correction" - which was not a "fix." Simply, she re-launched Windows in order to install the driver. Which resulted in the same popup indicating the status of driver install - but have not installed. I checked the policies of the printer to make sure that no documents were persistent. There is no document for any printer listed.

  PART c: Now, I go to support and download the section of the HP Web site for my printer model. I have download the latest package of driver/software for my version of Windows. Once the software installation begins, it ends up by asked me to unplug the USB for my printer. I did it. Then later in the software/driver installation, it asked me to re - connect the USB port of the printer to the computer. I did it. Installation window has detected the printer, and a second course contextual view displayed between PC and printer - steps 1-6. The process seems to hang on step "5 of 6". Then I finally get it.

  

  The 'help' was not very helpful here. Basically 3 options:

  1. Make sure the device is connected to your computer and turned on. Click on the "< back"="" button="" to="" try="">(I tried this - even doesn't have a result). "
  1. If the configuration of the device does not complete, some hidden configuration commands will be over. Click on the "< back"="" button="" the="" wait="" a="" few="" minutes="" for="" the="" device="" setup="" to="">(also tried - waited 10 minutes - still not)."
  1. If the problem persists, check the troubleshooting section in the Readme file, located on the CD-ROM. (printer is 6 years old. I don't have the CD. At installation of this download. If it was not very useful).

  So I you click on "next >" and received a message that basically says that the installation was a failure and I should try again or contact support manufacturing.

  PART D: I found an article on the forum to Support HP here: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Officejet-Pro-8600-driver-not-installi... I followed BharathKumarK's long troubleshooting suggestion. did everything exactly as shown. No problem is. This does not solve my problem. I again ran MSCONFIG and passed my services and selections start back as they were before this troubleshooting. Once again, restarted my PC and started searching on Google and HP for more responses. Printer was still in "Troubleshooting" in Control Panel devices and printers (as in part B above).

  PART e: I found an article on the Forum of Support HP, who suggested to use the "HP Print and Scan Doctor" to solve problems. I have downloaded and installed on my PC. The program Ran. It considers the K8600 printer and I clicked to move forward. Then I get this message-

  

  I know by the failure of installation described in the PART C it was true - thank you for what is obvious. At this point I quit a job for a whole day solve this printer. Then... of course I click on 'Get Installer' -knowing full well it's doing nothing, most I've tried to do. Yet, I'm still as advised. Download the driver/software package. Followed the steps - even ONCE got to 5 from step 6 and hook - finally showing all the same mistakes as in PART C.

  PART f: now I'm suspecting there may be cord issues. I have a HP Officejet H470 in the closet. I have it pick up and borrow the very short USB cord of this printer. It is a USB cable that is supplied with this printer. I have disconnected the K8600 current USB cord and plug the borrowed cord -it was too short to reach my office upstairs. So I put on my laptop. It is also a processor 2 GHz Intel i3, 6 GB of RAM on Windows 7 Pro 64-bit (Service Pack 1) OS. I have connected the printer to the laptop. Open an regular Word document and print. It successfully to print! I thought I had found the question - faulty USB cord! # Because of the way that the printer is on the wall and the cord is so short, I had to unplug the laptop USB to the laptop. Now, I come back and try printing another document I needed - I think that it was something from the internet. I pick up the laptop and Plug the printer into the laptop. Send the print job, printer sounds like it is about to start printing and then... nothing. The printer power light begins to blink. So I tried the same basic troubleshooting - restart the printer, by restarting the laptop... etc. I have to unplug the printer from the laptop. Finally, received the fire of the printer goes in now the key 'X' on the printer while the power on the bike. For the moment no diagnosis is printed by the way. Now I Plug the USB into the laptop. Windows picks it up and tries to install the drivers... as in PART B above. Now I'm back in the vicious circle of the same question on the laptop troubleshooting. Which I followed the PART Aand PART B , PART C... .the everything with the same failure.

  PART g: Now I'm frustrated beyond comprehension. It's day 2 of troubleshooting! I need to get back to work. I decided to leave the only K8600. I have to turn on the HP Officejet H470 mobile printer. I plug in the laptop - as I still need to print a working document. Windows picked it up and I got the Windows Installer popup of pilots. Got EVEN COULD not install driver message described in PART B!

  BOTTOM LINE:

  I need a printer. Printers that I have in my office are now overpriced paperweight. I don't know if it's printer problem, cord issue, Windows 7 problem or USB port problem... but I need help. So I spent all the morning writing this as detailed as possible, in an effort to last stitch to beg for help! Someone at - it still reading this? I swore if someone suggests one of the steps I've already tried... I think I'll hit the roof!

  Thank you

  Benji

  @John_Getzke

  Your last solution doesn't work anymore. HOWEVER... I have found the solution in an IMPROBABLE PLACE!

  Was this morning in Microsoft Excel and clicking on enter far into my stats in morning, and strictly out of habit, I clicked to print. It gave me an error message that I had never seen. (photo here)

  

  So I googled "error message 'The domain Active Directory Service is currently unavailable'". I came across a Microsoft support forum: http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/when-searching-for-a-printer-i-get-error-the/e3681f75-93bc-4779-88e2-dd0e5192202a

  Someone on this forum (several entries) suggested something on Notepad.

  I thought that "it IS STUPID! IT DOES NOT WORK! "But what the 7734... I'll try it anyway... IT WORKED!

  SOLUTION

  1. open Notepad.

  2. under file > print.

  3. click on "add a printer".

  4. a pop-up window displays and asks if you want to set up a LOCAL or NETWORK printer. (Mine was LOCAL)

  5. Select the printer port (mine was USB001 (virtual printer to USB port))

  6. you continue and gives you choices for type of printer on the left (IE. HP, DELL, BROTHER, etc..) (Mine was HP)

  7. on the right, you select the model of your printer. (Mine was HP Officejet Pro K8600)

  8. click Next, and a prompt QUICKLY introduced me with (over quickly) status bar and went to options "Printer Name" and "printer sharing."

  9. the last prompt allows you to "print a test page.

  I clicked on the test page printed and was SUPER HAPPY here my printer immediately start printing! Boxes printing and notebook. I went back to my Excel file. Clicked on print and VOILA! Print like a charm!

  I really hope this helps someone else out there. I wish I could tell you why it works or what was stopping Windows and HP of the installation of the printer, but at this point, I really don't care. I CAN PRINT AGAIN!

  Thank you John for trying to help with this problem!

• HP Deskjet 2050 3 in 1 printer, I want to just take the text black print outs

  Hello

  I recently bought

  HP Deskjet 2050 to my house

  My use is very limited and I want to just take black print out my pages of text

  So is it possible that I can load the printer/computer to never use the color cartridge, even if there is something of color on the page

  Thank you very much

  You can try it but your printer is unlikely to work properly. You'll start to see the Virgin and strangely colored printed pages.

  Kind regards
  ERICO

• HP DESKJET 3545 e all-in-one: I want to know that what type of ink cartridge of contains in HP deskjet 3545 e ink advantage all-in-one

  ink used in the cartridge (dye or Pigment)

  Hello

  HP Deskjet Ink Advantaje 3545 uses cartridges HP 650 as example (or a different number of ink for different regions) - so that the black ink is pigment-based, the tricolor ink is tinted.

  Kind regards

  Shlomi

• HP Deskjet 3545: How to reset the password of admin for HP Deskjet 3545. Cannot connect to the administrator settings page.

  I put a password for the printer. And whenever I try to open a session with him, he keeps asking the user name and password. So I want to reset the password or leave the field empty. Please help urgently.

  Hi @flame_ardor,

  Welcome to the Forums of HP Support! I understand you want to reset the password for your HP Deskjet Ink Advantage 3545.

  You should be able to do this by restoring the default network settings in the front panel of the DJ 3545:

  On the printer control panel, press the Wireless button. Wireless menu.

• HP Deskjet 3545 scanning show (exit Scan comes in pieces)

  Hello

  I recently pruchanged HP deskjet INK advantage 3545 printer all in one, everything is very well expect to sweep. Whenever I am trying to scan something this device save several copies of this specific analysis into pieces, example - if I try to scan a document that having a few signatures, logos, etc. lines then this device shows good scan to get a preview of the document, but when I click on save and check that there are 10-15 scan for a single document.

  From now that I have tried-

  updated drivers

  tried scanning on part and on the other - printer and laptop.

  uninstall all printer and re-installed latest drivers or software drivers that have been recently, I downloaded from the HP website.

  Rig-

  I tried to scan the document using Ubuntu 14 but could not connect scanner.

  Also tried to 8.1 Windows (64-bit).

  Thank you.

  Vijay Kumar Khurava

  Problem solved by changing the settings of scanning that was pointed out earlier to AUTO CORP., uncheck it after question solved.

• ink advantage Deskjet 3545: como hacer reseteo fabrica one advantage more deskjet ink 3545

  Hola soy nuevo in esto, espero explain well as sucede lo...

  Tengo a problema grabe, a few months ago compre una hp deskjet ink advantage more ago 3545 y estaba muy running good pero UN dia appeared as habia una change para the more there is the instale, the apague y sigueinte al dia as the encendi para volver has utilizarla me pidio me entirely than tubiera hojas blancas y pressure ok.

  Al hacer eso in the pantalla Patrick appears 'imprimiendo pagina alineacion '...  Pero no sales of esa pantalla, apago the Patrick, the return a prender y sigue el mismo message... I can print directly from the computadora apesar of than esta ese message, pero no puedo sacar form y escanner funcionar dejo el no works directly from the Patrick y tampoco dandole the orden del ordenador.

  "" probe are con quitarle corriente mientras esta burning y a tiempo conectarla pero el message again after no tambien is quita ' imprimiendo pagina alineacion "don't use the hp tool para problemas did y no soluciona nada, the change that instalo resultó danar el equipo.

  Quisiera saber training of back values of fabrica (factory reset) para dejarla como estaba cuando the Sin understand the change that descargo e instalo, there is that no me permite hacer nada, no el menu Escalin Patrick aprece ago I never print alineacion hoja already. está inutilizable the more.

  Hi @crisruel,

  Welcome to the HP Consumer Forum English!

  If you post your question in the language of your choice, please use the following link to do so;

  English: http://h30434.www3.hp.com

  Spanish: http://h30467.www3.hp.com

  French: http://h30478.www3.hp.com

  Portuguese: http://h30487.www3.hp.com

  German: http://h30492.www3.hp.com

  Korean: http://h30491.www3.hp.com/t5/community/communitypage

  Simplified Chinese: http://h30471.www3.hp.com/t5/community/communitypage

  Otherwise, feel free to post a message in English. Thank you and have a great day!

• advantage of ink HP deskjet 3545

  I bought the new printer. It shows paper jam. What to do.

  m c soti

  I bought the new deskjet printer 3545 02/05/2014 through flipkart.com. While installation it is showing paper jam.i don't know how to solve this problem