LaserJet P1102W: Computer is no longer grateful printer

Similar Questions

• Computer Vista no longer grateful camera.

  Recently I got Norton 360 downloaded on my computer.  (Vista 32 bit)   Computer is grateful is more my camera Canon SD750.  Never had this problem before installing Norton 360.

  Symantec is a common cause of BSOD.  I remove and replace it with Microsoft Security Essentials at LEAST FOR TESTER

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN

  http://www.Microsoft.com/security_essentials/

  Most often when a device is not it's because of a driver.  Try reinstalling your.

  It works for Vista, win 7 & 8

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• LaserJet p1102w: how to access the interface web printer with new router

  I just bought a new wireless router, hoping that I'll be able to more easily print with my p1102w.

  Internet access works ok desktop and laptop (wireless).

  However, I had bookmarked the IP address of my printer, and before, I've always been able to access it by clicking on the bookmark. I checked the range of IP addresses for the router, and the IP of the printer is outside this range, so I don't know why I am no longer able to access to this. I can't access the web interface, whether they come from my laptop or desktop (wired). However, the printer is capable of printing from the desktop without problem.

  How do I enter this? I would like to restart the configuration wireless configuration, but I thought I needed the web interface for this.

  I should just insert the CD? I made a tweak or two and would prefer to keep all the settings of the printer even if I can, but I can start all over again if I have to.

  
  HP LaserJet p1102w

  I just deleted the printer on my laptop computer, reset the settings of the printer default and then run Setup from the wired desktop wireless utility wireless. Seems to have worked, I can now access the web interface via my laptop now.

• HP Laserjet P1102w: Cannot find my network when connecting HP Laserjet P1102w

  Yesterday I bought a new HP Laserjet P1102w and I have problem of printer setup to work on the wireless network, I installed the software and when he asked me the weather to set it up via USB or wireless, I clicked on a wireless then he told me to enter my network SSID and I typed it correctly but he said "the printer could not communicate with any wireless router or" using the supplied access point SSIDS ' then I tried to check the network in the list but no network appear.

  The printer works fine with USB, but I need you to connect wireless.

  Hello

  I have this printer so I know how it is difficult to set up the printer using the wireless connection on your own.

  If your router supports Wi - Fi Protected Setup (WPS), it's the easiest way to configure the printer on a wireless network.

• "Unable to connect to the computer printer" message appears during installation of laserjet p1102w.

  During the installation of the wireless software for Laserjet P1102W on computer with XP Professional (pk2), the message ' printer was able to connect to the wireless network.  However, this computer is unable to connect to the printer. "I checked the printer and the computer both connected to the same network named with even WEP key, opening, credentials etc.  I have a linksys connected to the computer and the modem cable. When I connect using the USB connect wire to the computer directly, I can print.   Two software, wired and wireless, have been loaded.  My HP inkjet printer is wired to the linksys and works for multiple computers to the wireless network. Do I need to have another printer? I thought that I could still have a truly printer wireless!  I'm a novice at this.  Thanks for any help you can give.

  I called HP support.  The technology was very knowledgeable and accommodating.  HP Smart Install program (in the printer and on CD) that came in the box was an old version.  I had to reset the printer back to factory default and to download the new firmware on the HP.com website.

  The oldest had an incorrect address router (network). You can see the address of the router (IP) when you perform the self-test (hold down the button "on") under the information network.  IPv4 address must be the same as your router.  Now my printer and computer are looking at the same network.

  Works great!  Love this LaserJet.  Faster than my last HP LaserJet 4 L.

• How long is standard, the warranty of the manufacturer on the new printer, Laserjet P1102w?

  I just bought a HP LaserJet P1102w (in the United States). It works well, but I wonder how long the guarantee becomes? 30 days? 90?  A year?

  Just so I don't know how long to keep the receipt.

  
  HP LaserJet p1102w

  Hello

  This printer is guaranteed 1 year.

  http://www.shopping.HP.com/en_US/Home-Office/-/products/printers/HP-LaserJet/CE658A?HP-LaserJet-Pro-P1102w-printer

• LaserJet P1102w: HP LaserJet P1102w prints EXTREMELY slow by Wi - Fi

  I was struggling with this problem for a long time, but today it completely freaked me. I was ready to throw this piece of... printer!

  Problem is simple. When I try to print something wireless with graphics (jpeg or pictures images) to my iPhone, the iPad iOS 8.4 or the MacBook OS X 10.10 Yosemite, it takes forever! Document Word, PDF, preview or other programs - same result! I couldn't pring 9 pages today, after that 20 minutes, I gave up.

  What is going on. Let's say I'm on mac. Special print goes to the queue of the printer, as usual. After that, this task shows in the queue as 'connection to the printer', green light flashing on the printer, as usual. It takes a minute or two, it's this that unusual. After that, "printing page 1 of departure." This can take 1, 2, 3 minutes... forever! Then a page prints in fact (for 5-7 minutes at this stage brand) and it takes time even to print page two and so on, or (probably) it will spit the unfinished page (only two or three inches printed and the rest of the page is empty) and displays an error flashing light orange. UGH!

  I gave up on iPhone/iPad it long, since they can't see the print queue and it is the unpredictable result. You can wait 10 minutes for your document, and then leave and then just find the document printed when you no longer need (or half of the document).

  I don't have this problem when you print any text, emails, simple confirmation of safari pages and so on. Only when printing document with pdf graphics or heavy. I don't have this problem when you connect the printer via the USB port (discovered this today). Now what really bothers me, is the fact that I actually could print heavy machine PDF Windows without wireless problem (I had exact problem even print document from my mac). What is going on?!

  I googled this problem and found that I am not alone. I've updated all the software and firmware, I tried to reset everything - No. DICE! It's really very frustrating. I thought that this is because of the memory of the printer, but why it works perfectly via USB then?

  In any case, it is a cry from the heart. Help, please. The printer is good, but unusabe in certain situations.

  Hello @Ivan4!

  Welcome to the community of HP.

  I hope you have a pleasant experience here!

  I want to help you with slow printing that you encounter when you print images of your HP LaserJet P1102w wireless of your Apple devices.

  I thank very you much for the detailed description. Because the printer is able to print fine wireless windows machine, we know that the issue is not with the printer or the communication. The fact that none of the Apple devices are able to print wireless images without being really slow, leads me to believe maybe it's a problem with the AirPrint driver or the Hello protocol that your Apple devices use to communicate information.

  Image files are much larger, and much more data needs to be transmitted, so it is normal for them to take longer to print than a regular text document. However, if there is a marked difference in speed between the Windows computer and Apple devices, then the question is probably not just the files are larger.

  I want you to make sure that the printer is installed with the driver on your Mac. (Because there is no feature complete HP software available for Mac 10.10 operating system will often default to the AirPrint driver)

  1. Click on the Apple icon on your Menu bar.
  2. Select System Preferences.
  3. Choose Printers and Scanners.
  4. Select your printer and press the (-) button at the bottom of the list to remove.
  5. Select (+), and then click Add printers and Scanners. (NOTE: do not select the printer in the list of printers nearby as this will often use the AirPrint driver automatically)
  6. Select your printer (one that shows multifunction Hello under 'Type').
  7. At the bottom of the window under use: does say AirPrint? If so, click on the drop-down list , and you should see a specific driver for the printer. Click on Add.
  8. Try to print a picture once again and let me know the result.

  If it works to solve the problem, then I suggest downloading the HP ePrint app on your iPhone / iPad to print. It may be a problem of incompatibility between the AirPrint on your Apple devices and your router.

  I look forward to hear from you and work at a resolution of this problem.

  

• "Printer Validation failed" on HP LaserJet p1102w

  When you use the software of HP ePrint on Windows 7 Pro x 64, I get the error 'Failure of Validation printer' when printing a pre-configured HP Laserjet p1102w printer wireless. It occurs after the selection of the printer 'HP ePrint' & clicking on print, then clicking the printer wireless found on the ePrint window. I am able to use the ePrint for Android & iOS app to print correctly on the same printer. I intend to use this printer to print wireless from several rooms of conference on different floors, so a USB conection is not an option. Does anyone know how to solve this problem, so I no longer receive this error of the ePrint Windows software?

  In addition, the printer has the latest version of the firmware 20130213. And I tried to remove the password from the printer, but it still produces the error.

  I understand now. The works of ePrint better if driver you need multiple computers to access a printer on a different network by turning on ePrint in the printer embedded web server, printing a page of information with a printer (request code) code and complete the implementation at www.hpconnected.com.  Otherwise, you need to install full feature software and drivers (the link is to the American version of Windows 7 64-bit) on each computer and make sure that each device is on the same network as the printer.

  I have included a link here with more information on how to set up ePrint.  Respectively, it seems that you do not want to use the ePrint feature and for this purpose, you will continue to have problems with the ePrint driver designed for this specific purpose.  If you have any other questions, I'm happy to help you.

• print - Laserjet P1102w - new install via USB

  I tried twelve ways to Sunday to get my new Laserjet P1102w to print.  The installation, which took place today, seems to agree.  I've uninstalled and reinstalled the software a couple of times.  A test page is quickly obtained at the end of each facility.  But when I try to print a document, it never makes it to the printer.  Rather, bunch printing just straight up in a queue in the printer on the computer dialog box that clear periodically.

  I ran the HP diagosntic tool.  He told me that everything is fine.

  I installed the printer to an HP Optiplex running Windows7 64 bit.  It is on a network, but I have deskadmin access.

  All the lights on the printer appear to be in good condition.  Nothing that connects, just a light green continuous.

  The question is, why I can not get print comands to my computer (where they appear in the queue) to the printer.

  At one point, I was wondering if something was wrong with the USB cord.  It's long, 16 feet.  But it works well enough to produce the test page to each facility.

  Any advice will be GREATLY appreciated.

  Thank you.

  Minonk

  HI Minonk,

  The connection peut be at fault; the fact that you can get this test page to print means that it is probably OK.  If you can swap a new cable, try this after everything and maybe move the printer more ready for a test.  Again, that is if all other fails...

  Try restarting the spooler.  There are two ways to do this.  You can buy - they're basically the same thing and it's just a matter of which the way is most comfortable for you.

  -------------------------------------------------------------------------------------------------------------------------------------------------

  Control Panel > display icon > Administrative Tools > Services > scroll down... look for > Print Spooler > click on restart the Service

  OR

  • Start > search / type > "cmd" > click on "Cmd.exe".
    Type net stop spooler , and then press the enter key

  Box: If you delete the queue print jobs, you can do this here with:

  • Type del %windir%\system32\spool\printers\*.*/q , and then press the enter key

  Note: the only spaces in this command is a single space between led and % and a single space between * and / q

  • Type net start spooler , and then press the enter key
  • Type exit , and then press enter to exit Cmd.exe

  ---------------------------------------------------------------------------------------------------------------------------------------------------

  It's my pleasure to help.

  Say "thank you!" to the help by clicking on the star of Kudos to show your appreciation for the help.

  Fixed?  Mark this message 'accept as Solution' to help others find the answers.

  Note: You can find "Accept as Solution" only on the threads started by you.

• LaserJet p1102w, windows 8.1, prints, but reports error

  My laserjet P1102W prints fine wireless, but an error every time.

  Yes, I reinstalled the latest version of the installation software. Yes, I tried printing doctor, he found nothing.  Yes, I downloaded and installed the latest drivers from that date.  Yes, I tried the tool which is supposed to find the latest drivers he, he did not support this version.  Yes, I looked at the ethernet configuration and it was fine - I'M able to print as I said.

  No, none of this has worked.

  I receive the error message in the upper right of the screen whenever I try to print.  All that says is that the printer cannot print the file.  Yes, this happens since the print spooler.

  So, what's next?

  Hi @draythomp,

  I see by your post that you are able to print on the wireless network, but you get a message error "the printer can print the file. You have successfully updated the software of the printer with the same results.  I can help you with this, but I need more information.

  This error appears when printing from any application?

  Meanwhile, empty folder of spool and restart the print spooler.

  How to clear the current print queue in Windows Vista and Windows 7.

  You also update the firmware of the printer?

  If this isn't the case, then I would update the firmware to see if this will help. This, although by a USB connection.

  HP LaserJet Pro P1102w printer drivers.

  Select your operating system, click Next, click the link for the firmware.

  What operating system do you use?

  Mac OS X: how to find which Mac OS X Version is on my computer?

  How to find the Windows Edition and the Version on your computer.

  Good day!
  Thank you.

• HP LaserJet P1102W: P1102W random print

  Hello

  I have a 2 HP LaserJet P1102w years and when I sent a document to print an error message appears on the computer saying that it was impossible to print. I thought nothing about it and continued and printed on another printer. A few minutes later my P1102W began to print the document that I had tried to send streaming (about 300 times)

  I tried to cancel printing, but it has not been recognized as a print job and the Cancel button on the printer just stopped printing for a few seconds. Finally, it stopped printing and started working normally.

  Unfortuately, I couldn't ask HP at the time that he was after 18:00 and in the United Kingdom, all the customer service had stopped by here and I am unable to contact now as the productwasnt under warranty for any reflection on what has happened and how to prevent it is welcome.

  Does anyone else have this problem?

  Hi @Brad14,

  I read your post and see that the printer prints over and over again the same document. I will definitely do my best to help you.

  I have provided a document to disable bidirectional support, which should solve this problem.

  Product always prints the same Print Job after it is installed on a network.

  If you're still having problems, clear the record of the spool and restart the print spooler.

  How to clear the current queue in Windows Vista & Windows 7.

  How is the printer connected? (USB / wireless)

  If you appreciate my efforts, please click on the "Thumbs up" button below.

  If there is anything else I can help you, let me know. Thank you.

• LaserJet P1102w: Laserjet P1102w cannot activate the installation with Windows Vista 32 bit PC computer wireless

  Hello forum HP, I can use the Laserjet P1102w with USB connection on 3 different devices including a portable Apple and PC Windows Vista and Windows 7 laptop computer, but can not perform a wireless installation with the broadband internet connected wireless PC running Windows Vista 32 bit. The main message is that the computer does not find the printer even when using the USB connection. Any help would be appreciated.

  Hi @Kaiser3107,

  Welcome to the HP Support forum.

  I understand that you have a HP LaserJet Pro P1102w printer that connects three thin devices via the USB port, but you can not perform a wireless installation on a fourth device, equipped of Windows Vista 32-bit, because the PC does not detect the printer via the USB port. I would like to help with that.

  Here is a support document which includes 'USB device is not detected by Windows' which can help the issue of detection - Troubleshooting (Windows Vista) USB connections.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• LaserJet P1102W: print

  My HP Laserjet P1102W is about two years old.  He has recently stopped working and a member of the staff of HP used a remote access connection to download new drivers to make it work again usuing a USB cable.  I received a phone call the next day to check the printer was now repaired and I accepted everything was fine.

  I did not check that wireless however until yesterday and it does not work.  My wife connects to the wireless printer and everything was fine until the repair.  The message she gets when she tries to print, is that the printer is offline although it was lit.

  There is another problem.  When I turn on the printer the green light is solid, then flashes intermittently and then turns off.  I remember when it was new I could put to sleep after five minutes and he wakes up and print when a request has been sent.  I can't find a way to do it now.

  Repairs any help would be most appreciated.  I'm not very good with technology would contribute to simple language.

  I use 10 64-bit Windows.

  Thank you

  Mick8

  Hi @Mick8,

  Most likely, it is a problem of network connectivity and not the printer. I would try the steps listed below.

  When you run the Wireless Network Configuration, it should automatically find the SSID. (it is the name of your network)

  Since it is not automatically find, power cycle the router and try to run it again.

  Make sure that the computer is connected to the appropriate network.

  Let me know how it goes. Thank you.

• HP Jet P1102w Laser: cannot install HP Laserjet P1102w correctly (USB detects no not my printer)

  Dear Sir.

  Recently I bought a new HP Laserjet P1102w, my printer is on and also attached with USB, but when I go to install the Geniune CD with bundled software, the error came and procedure do not fill correctly, what should I do? I want to use it with wireless printing, but how can I install it correctly? Printer showing also the number real name and model on PC... What is c?

  

  Hi @NaveedShaikh,

  I see by your post that the printer is not detected. I want to help you solve this problem. If this helps you to find a solution, please click on the button "" accept as Solution"" down below this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Thanks for providing the excellent screenshots. The CD is used for different models, the P1100 is your printer series.

  Turn on the printer and make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation. The USB cable should not be more then 6 feet. Make sure that the USB cable is connected directly to the computer. (not a station or a hub) Try a different USB port on the computer.

  This can also occur when the printer is already recognized as the USB connection and windows does not yet detect.

  Remove the USB cable plugged in, remove the printer in the devices and printers (if the list) and the Device Manager.

  To access the Device Manager:

  Press the windows key and press X on the keyboard at the same time in the office.

  Then click on Device Manager in the list.

  Verify that the connections in Device Manager for the entries of the printer, under Bus USB controllers are looking for USB, Mass Storage Device print media or anything with a yellow exclamation point or an unknown device. Right click and uninstall the device. Then reconnect the USB cable and it must be detectable again.

  If you're still having problems, unplug the USB cable, run uninstall and reinstall the printer software again. Do not connect the USB cable until you are prompted during the installation.

  If there is anything else I can help you, let me know. Thank you.

• HP LaserJet P1102w worked very well and now just print 1st page of multi-page documents

  Hi, I used my printer for more than 6 months.

  Last month, has had the problem for a couple of days, then he went suddenly (yahoo, I thought).

  Has started again last night when printing pdf documents, it only prints the first page and then it seems stuck on page 2 (52% complete transfer appears on the windows printer).  For word, it seems to just take forever to print other pages...

  Running on a Mac OX X Yosemite.  Printer is connected with a wire (I was never able to complete the wireless connection and got too busy to spend more time understanding...).

  Tried to turn off my computer and then restarting him.  Also stop the printer and restarted.

  Thanks in advance,

  M

  Hi @MartineRB ,

  I see you are having problems printing multi-page documents. I would like to help.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the printer name) Then click the Add button.

  Try to print again.

  If you are able to print now by the USB connection and want to set up the printer on the wireless network, take a look at the following:

  Restore the default settings of the printer.

  Turn the printer off, press and hold the wireless button and the Cancel (x button) button while turning the printer on and do not release both buttons until the printer stops making the noise.

  Print a configuration report and check the SSID address and IP are disabled.
  Printing a Configuration Page. Select the method two.

  Make sure that Safari is set as default browser. Sometimes, the built-in Web server will not open if it is not.

  Open Safari, at the top, select the Safari menu, select Preferences, general, as a default value.

  Here's a Youtube video of the Laserjet P1102w on Maverick wireless installation.

  LaserJet P1102w.

  You can follow the steps instead of the video.

  You must connect the USB cable from the printer to the computer to install the printer as a USB device first and then to configure the wireless network.

  Turn on the printer, connect the USB cable and install the update from Apple that should load automatically.

  Then go to the Apple, system preferences, printers and Scanners.

  Highlight the Laserjet on the left side of the window.

  Then click Open Print Queue, click settings, click utility, click open printer utility, then click the button HTML Config.

  The integrated for the printer Web server opens.

  Click on the network tab, select Wireless on the left side.

  Fill in the information for your network. Status make sure that you select enabled.

  Apply the settings.

  Then go back to the Apple preferences system, printers, and Scanners and click the + to add the Hello Laserjet Printer. (may take a few minutes to appear) Make sure that the printer is listed beside the use: displays the name of the correct printer and not the driver by default, and then click the Add button.

  Remove the USB printer in the list of printers and Scanners window.

  Unplug the USB cable.

  Test the printer.

  If you need help, let me know.

  Good day!
  Thank you.