my hp deskjet 5740 does not print more of my change of ink cartridges.

Similar Questions

• DeskJet 5550 does not print after I installed new black ink cartridge.

  I recently got a new Dell with Windows Vista 64 - bit OS.  Printer was working fine until I replaced the black ink cartridge.  Print the control page as usual after you install the cartridge, it will not print anything else now.  Not even a test page.  I tried taking the cartridge out and put it back in.  Tried to pull the plug on the back of the printer and plug it back.  Tried turning the printer off and on again.  Also tried to restart the computer.  I downloaded the HP Print Diagnostic report and could not find any problems.  Could there be a problem with the ink cartridge itself?

  Well first of all, I went and bought a different black ink cartridge to remove the cartridge in the problem.  This was not it.  Then I unplugged the printer and cleaned thoroughly and connected plug.  Still did not work.  Then I went into the properties on my printer and started to play with the settings.  FINALLY I FIXED IT!  I clicked on the tab advanced and then click Print Processor.  I then changed to WinPrint and retried the Test Page printing under the general tab and it worked!  Woo Hoo!

• "I have a hp officejet 6500 e709 - black ink does not print." I have replaced the ink cartridge...

  "I have a HP Officejet 6500 E709 - black ink does not print." I have replaced the ink cartridge... clean the print heads and contacts... and nothing seems to work. All other colours print fine. HELP ME PLEASE.

  Before you buy a new set of PHA, you could try following the instructions on this post for a more aggressive cleaning Interior http://h30434.www3.hp.com/t5/Other-Printing-Questions/Photosmart-Premium-c309a-Black-prints-out-green-on-photo-paper/m-p/449245/highlight/true#M28673

  Try this first and post back to tell how you got.

• HP Deskjet 710C does not print colors (also after changing the cartridge with a new one)

  HP Deskjet 710C on Windows XP

  Problem: Printer does not print color. Black printing works. It also does not print color now, I changed the color with a new cartridge. Remove the printer from Windows XP and reinstall also does not resolve it. Also by using the option in Windows/printer driver for the cleaning cartridge has failed. Anyone know a solution to this?

  There is a document about the lack of color of the issues on the printer Deskjet 710C that can be found here.

  I hope this helps!

• DeskJet 5740 does not print

  This printer has worked flawlessly for the past six years. All of a sudden, he just stopped printing. No degradation of quality. Just a day, it was beautiful, and the next day, zip. Loads of paper, it looks like his impression, but there's absolutely nothing on paper when it comes out. Ink tank indicators are not on, as they would be if it wasn't more ink. Indeed, absolutely everything on the device looks and seems normal - except that now it does not print.

  If the printer has been disconnected from power before that the cartridges were parked correctly, they could have clogged print heads.  Try to gently absorb printheads on a damp cloth.  two strong ink black to black, the color should be strong tasks of cyan, magenta and yellow.  If there are only small tasks then try up to three cycles of cleaning the box tool.

• HP Photosmart C309a does not print after I installed new black ink cartridge.

  Printer was working fine until I replaced the black ink cartridge.
  Does not print the text in black on the printer test page.
  The States new HP printer installed cartridge.
  All other colors are working well and were replaced at the same time.
  Tried cleaning cartridges - pulling the cartridge and put back in - turning the printer off and on again.
  Also tried to restart the computer.
  Could there be a problem with the ink cartridge itself?

  REAL SOLUTION. I had the same experience, spent hours pulling my hair like children had project do to school and it was 22:00.  Your cart is clogged! Here IS THE SOLUTION! (: 1) remove all ink cartridges. (2) extract the carriage that circulate in the ink cartridges by lever on the right and the trolley lifting vertically. (3) wipe any accumulation of visible ink on the outside with clean cloth or paper towel. (4) THIS IS THE KEY: keep transport under hot running water to empty all the handwritten entries in the irrigation channels that distribute ink. Keep rinsing in clear water i.e. no sign of ink. (5) trolley dry with clean cloth and blowing in areas, you can access in order to remove the remains of the water. (6) let transport air-dry overnight. (7) Re-install transport, then reinstall the ink cartridges. 8) ENJOY YOUR PRINTER. (9) I saw many entries on this topic dating back two years, without real solution offered. I am an automotive engineer in unemployment. If HP (or anyone else) would like to hire a smart worker, engineer in the Detroit area, please inform. Thank you!

• Printer does not print in color after installing new ink cartridge

  I have a HP Photosmart C7280 all-in-one printer.   Windows 7 is my OS.  I have made no other changes to my computer before this problem.

  My problem:

  I installed a genuine HP brand new yellow ink cartridge in my computer because my other cartridge was empty.  After that I installed a new cartridge, my printer normally goes through an initialization process.  This time he did that.  Now when I try to print anything in color, I get a window that says "ink empty Casrtridges.   To print in color, install the following cartridges: yellow "then turns and she says in that it can only print in black."

  I did a Test print.  I ran "clean cartridges".  I did a 'print align.   All these prints in color, including the yellow.  I also did a color copy and printed the color yellow.   Ink level shows the yellow as a FULL cartridge.

  I have tried with 3 new genuine HP yellow ink cartridges and it still doesn't let me do a color print.  I have rebooted my system, unplugged the printer several times and it still will not print color.

  What else could be my problem?  What else can I try?

  Thanks for any help anyone can give me.

  Carol

  It seems that the error got stuck in the printer driver. Try to uninstall and reinstall the printer software. That should clear up the problem. I'll link the latest software and drivers below. Let me know what happens.

  Uninstalling the printer software

  Installation of the software of the printer in Windows 7 for a USB cable connection

  Installation of the software of the printer on a wireless network or network (Ethernet) cable

  HP Photosmart full feature software and drivers

• My Deskjet 3520 does not print envelopes. None of the proposed solutions work.

  My DEskjet 3520 does not print envelopes.  I tried all the solutions, and none of them work.  My operating system is Windows XP Professional SP 3.  The computer is a Dell inspiron 530.   There is noe error messages.  When the envelope comes out of the printer, it is empty.  When an 8.5 x 11 piece of paper is in the printer, the address information prints on the right edge of the paper in landscape format.

  My conclusion is that there is a serious error in the software.

  If there is any workaround I would be grateful to receive them.

  Charlie Wingo

  I simply "duped" the copier and formatted the envelope to print in the center of an 8 1/2 X 11 inch paper landscape page.  It took a few violins, but I've got envelopes printing.

• HP deskjet 5440 does not print images in a word document

  HP deskjet 5440 does not print images in a word document. Using Windows 7 Ultimate 32 bit.

  No problem.

• HP 3015 printer does not print more than 1 copy both

  Original title: all-in-one Hp 3015

  3015 HP all-in-one does not print more than 1 copy at a time.

  Hi James,

  Looks like a problem of printer settings.

  Here is something you can try.

  1. Select Start, and then devices and printers.

  2. right click on the HP LaserJet 3015 printer icon, then select Properties.

  3. Select the device settings tab.

  4. find Mopier Mode and storage of work settings.

  5. change the settings from active to disabled.

  6. click on apply then OK and then try to print.

  It has worked for many users. It might help you as well. Answer please if you have any questions.

• I have windows 7, my HP deskjet printer does not print the colors I changed to another laptop with win 7 = no colors which, in windows 7 64 cause3s this

  I have windows 7, my HP deskjet printer does not print the colors I changed to another laptop with win 7 = no colors which, in windows 7 64 cause3s this

  Display uppercase makes reading difficult.

  Have you checked the printer properties settings?

  It could also be due to a problem with ink cartridge

  Used HP diagnostics or printed the test page for HP?

  Its nothing to do with win7 the printer settings are taken from the printer to the driver

• Inkjet pro 6830: printer does not except off the coast of brand ink cartridges.

  I bought a new pro 6830 2 years and it was recalled for replacing head inkjet printer. Since I received

  reconditioned replacement, it does not except other other than HP compatible ink cartridges. I hear here

  is going to be the fix for the problem. Is this true?

  Hi @79pinetree,.

  Thank you for joining the HP Forums!

  I understand that your printer HP Officejet pro 6830 does not except off the coast of brand ink cartridges. I am pleased to see that for you!

  Please see this post, dedicated to the best printing experience, of @Bill_F.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope that answers your question!

• HP Deskjet 2540 all-in-one: HP Deskjet 2540 does not print

  I bought my printer a while ago and implemented so I could print wireless from my Mac. The other day I had to print some PDF documents and printed first, but the other two never printed. In the queue, it says "ready to print" and the two buttons wireless to the printer are turned on. It also does not print when I connect it to the USB port. But when I print the test page, which printed fine.

  Hey @bess-stanton1,.

  Welcome to the Forums of HP Support!

  I see that you have some problems with your machine printing Mac OSX 10.11 for the all-in-one printer Deskjet 2540. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Disconnect the USB cable if it is connected.
  2. Turn the printer off.
  3. While the printer is turned off, disconnect the power cable from the back of the router.
  4. When the lights come back on the router, turn on the printer.
  5. Close any programs you have open.
  6. On your Mac, click on your Apple icon, system preferences and printers and Scanners.
  7. Hold down the CTRL key and click on an icon of your printer on the left.
  8. Click on reset printing system.
  9. Click the 'more' in the lower left corner.
  10. Select your printer from the list.
  11. Click in the box next to and select your printer from the list.
  12. Click on Add.

  Please let me know if you can print after you follow the above. If you can, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• DeskJet 1050 - J410a: HP Deskjet 1050 does not print after upgrade of Windows 10

  Dear forum,

  I recently upgraded my HP Windows OS 8.1 for Windows 10 desktop computer. My deskjet 1050 printer, which worked fine before the upgrade, does not properly more print after the upgrade.

  I used HP Print and Scan Doctor several times, indicating no any problems. I am able to scan documents, the question is limited to printing. I also deleted and reinstalled the drivers at least 2 times (and restarted all systems on a regular basis).

  • A "test print" works very well.
  • When I print a PDF from the edge, the printer creates output but not good quality.
  • When I print an office word document, pages came out empty.

  3 cases have a common behavior, whenever I get an error message. "Morning maken puts printer niet mogelijk. Duch is for "cannot connect to the printer.".

  Do you have any tips for me?

  With sincere friendships.

  Pieter

  HeyPieter_Belgium

  Welcome to the HP Forums, I'd love to help you with printing problems you encounter. Although I am not sure what is cause of the error of communication, or of poor quality, I suspect it has something to with the pilot and the recent upgrade. I suggest to uninstall the software, remove the Chuck from the properties of the server, and then put it back using the printer Installation Wizard. I will list the links and instructions below to help you in each of these steps.

  HP printers - uninstalling the software of the printer (Windows)

  Remove the driver from the print server properties:

  1. in the folder "devices and printers".

  2. choose "print server properties.

  • Win XP - with no printer selected, click 'File' then 'server properties '.
  • Windows Vista - with no printer selected, press 'Alt' and then click 'file' then 'server properties '.
  • Windows 7/8, 8.1 and 10 -select any printer in the "Devices and printers" folder and click on "Print server properties" above.

  3. click on the "Drivers" tab at the top of the window "properties of the print server.

  4. choose the printer that you want to uninstall, and then click 'remove '.

  5. choose "Remove driver only.

  6. the next screen will give a warning, letting you know that the removal of the driver package will remove it from the system. Click 'Yes' to say are you sure you want to do.

  If documents are stuck in the spooler to print, you see an error, cancel all documents waiting in the print queue or try restart the spooler to print, and then try to delete the driver from 'Print server properties' again. If she will not always remove the sachet, restart the computer and the printer should correct this error "in use" and allow the driver to be removed.

  • If him you continue to get an "in use" message followed the steps in the document here. The specified printer driver is currently in use

  Download and run the Installation Wizard for printer: www.HP.com/go/Tools 

  If this solves the problem, please indicate your post as solved by clicking on the accept button Solution below. If you need help, let me know!

  Thank you.

• DeskJet F488 does not print

  I have a Deskjet F4488 - CB745 (bought in shanghai) from a Macbook OSX 10.6.8 runnning and have installed the driver on the HP site appropriate for OSX 10.6. It scans very well but does not print. I printed a test page the printer itself is fine. What Miss me? any suggestions would be welcome.

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.