HP Deskjet D2660: All prints gives blank Pages

Similar Questions

• When I give a print, only blank page comes my printer is HP Laser Jet P1102

  When I give a print, only blank page comes my printer is HP Laser Jet P1102

  Hi aremps,

  1 did you changes to the computer before the show?
  2. what operating system you have installed in the computer?

  This problem can occur because the print settings cartridge. Check your ink cartridges to see if you are out of ink. Refer to the printer manual for settings and troubleshooting.

  Please select the operating system and follow the instructions to solve the problem:
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01892627&cc=us&DLC=en&LC=en

  Please report if you are still having the problem. I will be happy to provide you with additional options.

• My HP Officejet Pro L7680 print a blank page before every PDF print job

  My HP Officejet Pro L7680 print a blank page before every PDF print job, regardless if it's a PDF I create or a tht is sen for me.  All PDF files behave in the same way. The Document is good, but its annoying to have to go out the blank sheets and put back them in the printer.

  Hello @RMorley,

  Thank you for visiting the Forums from the HP Support! I understand that when you print pdf documents on your HP Officejet Pro L7680, it prints a blank page.

  There could be a few things gong here, we will make sure that you have not configured it to use a separator between the draw sheet:

  1. go to your devices and printers

  2. right-click on your JO L7680

  3. navigate to printing properties

  4. click on the Advanced tab

  5. click on the Separator Page

  It was empty or was there something put there? If something is listed here please delete and apply the changes.

  If there was no set of pages of separation, I would like to you to perform printing and scanning doctor > www.hp.com/go/tools- it was designed by HP to offer users troubleshooting and characteristics of fix needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  The PSDR find something, let me know the results?

  If you still print the extra, please check the size of the paper, that is - this currently fixed at?

  Please let me the following information if you still get the blank page before prints:

  1. What is your current operating system, Windows or Mac and what version?

  2. What is the connected printer, USB or wireless?

  3. If you print from the internet or e-mail you get the blank page or documents?

  Thanks again,

• OfficeJet Pro 8500 has prints a blank page before each print job

  He just started this recently. Prints a blank page before each print job. Because of this quirk, I can't print now before backward.

  Hi Stevienext,

  Thanks for your response with your OS info!

  I would say that running the HP print and Scan Doctor to start to see if that solves the problem.

  If the problem persists, continue.

  Then, try to print from a few different programs to see if the problem occurs in only program or more. This will help us better to 'target' the question.

  Let me know if the pages are still printing in white and that the programmes seem to be giving you the problem.

  I'll do more if necessary suggestions there!

  Have a great weekend

• Deskjet 1000 printer - J110a: printer prints a blank Page - HP anthentic color and black ink cartridges are full

  Used this printer for months without problem until he ran out of color ink. Buy genuine HP color ink on amazon and replaced the empty color ink.  Installed the latest driver. Printer seems to work fine except the rest blank page. HP Print and Scan Doctor 4.9 finds no errors, no problem.  Cleaning print head. Aligned printhead printed normal test result on the page. Results of tests on white page. Yet performance printer continues to give green checkmarks on all issues. No error found.  I followed the video instructions from HP customer support, but the problem persists.  http://support.HP.com/us-en/product/HP-DeskJet-1000-Printer-series---J110/4066042/model/4066376/docu...

  Given that you've tried the HP web site, try these videos Youtube here.

  https://www.YouTube.com/results?search_query=DeskJet+1000+print+head

  Find out more if necessary.  If no joy, your printer is toast.

• HP Officejet 5610xi All in Pri: blank page fate when I try to make a copy on my HP 5610xi All In One Printer

  Recently, I get a blank Page when I try to copy anything on my HP Officejet 5610xi All in One Printer.

  Hello

  I understand that you get a blank page while trying to copy.

  Make sure that the printer is connected directly to a wall outlet, not a surge protector.  If this fails to resolve the problem, please follow the steps from the link below.

  Problem copying

  Give Kudos to say 'thank you' by clicking on the "icon shots."

  Click on 'accept as Solution' if it has solved your problem, while others may find it.

  Although I am an employee of HP, I speak for myself and not for HP.

• HP LaserJet M2727 MFP Series PCL 6 - prints the blank page before and after each document in all cases

  HP LaserJet M2727 MFP Series PCL 6
  prints blank page before and after each document in all cases
  Does anyone else have this problem.

  It must be a preference setting, but I watched three times and CAP does not seem to determine what setting to change.

  See if they help you:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&ObjectID=c01477176&prodTypeId=18972&prodSeriesId=3377075

  http://h30499.www3.HP.com/T5/printers-LaserJet/LaserJet-M2727-NF-can-I-suppress-blank-pages-with-this-printer/TD-p/2359555

  http://superuser.com/questions/315522/computer-prints-blank-pages-before-and-after-content

• HP Envy 4500: HP Envy 4500 did not warn me that he was out of ink--just print a blank page.

  My Envy 4500 printer showed black ink low level but still little available.  When I tried to print, just a blank page was produced.  This model tell you not that the ink is out?

  Hey @timmerhyll,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I understand that you have a cartridge in your desire 4500 e - all - in - one printer that is low on ink, but has stopped printing. This printer will display a warning when the cartridge is low on ink, but continues to print if there is an entry ink in the cartridges or not. Most likely, the cartridge is empty, but this document gives an overview of the steps to fix the poor troubleshooting print quality. If this document does not allow the cartridge print cartridge then would need to be replaced.

  Please let me know if this resolves your problems or if you have any other questions. Otherwise, have a wonderful evening!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• HP Officejet Pro 8630 - work of borderless printing produces blank pages

  Hello-

  On my HP Officejet Pro 8630, when I start a print job and select ' without borders on "print 3 or more copies, the first 2 pages of the print job, and then a blank page prints, followed by a good impression, followed with a blank page, etc. until that work ends.

  If I disable the option without borders, the job will print correctly without blank pages.  I tried printing from multiple computers and programs with the same number and have updated printer drivers / the most recent versions.

  I tried printing wired network, wireless network and USB all with the same result.  I've had the printer for less than a month.

  I use the printer for business purposes, and it is causing the major headaches!

  Thank you

  I solved the problem by selecting the Type of paper - HP Bright White... She has been set to the default value of plain paper.  I can now borderless printing correctly without blank pages.

• Photosmart D7460 prints a blank page between every page of text.

  My D7460 spits out a blank page before every page it prints. I have read the manual and can not find a solution for this problem. I retinstalled the drivers, reboot the printer by default, etc.. There is no error message.

  I had the same problem. Printer unplugged, uninstalled all HP applications, then reinstalled. Seems to work. However, I tried to fix the blurry photos, but they are still hurting. Used to be great. It looks like its back to Kodak.

• Printing a blank page

  Whenever I print a document follows a white. How can I fix?

  Thanks for the reply.

  I would like to run the print HP and Dr. Scan to try to dispel the impression of the black page after your document. If you don't have it already, please make a copy of the front of the printer. The blank page follows the copy?

  Try to check for updates on the front panel of the printer, press the Web Services icon in the upper left corner > settings > Product Updates > search for updates of the product now.

• Printer HP C309g won't copy/print. Blank page only.

  My HP C309g printer does not print copy or not.  I only get blank pages.

  Hi, have you tried running a few cleaning cycles?

• PSC 1350 all prints a test page every time when turned on

  After changing the cartridge, we printed test page.

  Now, whenever we turn on the printer it prints test page automatically.

  How to disable this option?

  Thank you

  Hello vancat,

  If your problem is that your PSC 1350 prints a test page when it is turned on or after every printjob, it is very likely because the cartridge alignment process is not finished. After you have installed a new cartridge in the printer, it will print an alignment page. You must take this page and place it on the scanner glass (make sure that the top of the page is in a good way), then you press the "Scan" button on the printer itself. It will scan the page (that is, read the page) and full alignment process (so it is not scanning in the sense that it sends an image to the computer).

  I hope that clarifies the process of alignment slightly.

• Deskjet F4400 all in one test page prints the missing lines and partial characters

  Haved tried to use the doctor print re - install the printing software, clean print cartridges, manual and automatic. Tried new print cartridges, nothing seems to help.  Someone has ideas of what to try?

  Sorry, this printer does not have the detachable printhead.

  You may have to contact the HP Support (1800-474-6836).

• Photosmart HP 6520: Printer work and print a blank page, on its own without input from any computer or device.

  I use a configuration of Photosmart Printer series 6520 linked to a Comcast Cable modem router /wifi.  I use WPA2 security with a long password. (I also tried setting by using the system of the WPS - with changes in symptoms). With this router, the wifi connection I share with

  1. MacbookPro computer
  2. iPhone 6SPlus
  3. 12.9 inches iPad Pro

  The symptoms are:

  At random times during the day or night, you can hear computer works as if someone sent a print job.

  1. You go to the printer, and the front panel display is on.
  2. There is an empty of leaves paper ejected from the printer.

  In the night when in bed and all devices are disabled except router and of course the printer, I can hear the printer works and then I wake up the next morning and there is a blank sheet of paper in the output tray.  I'm off to put the paper in the paper tray.

  I keep the printer on 24 hours a day, because as ink jet printer inks tend to dry out the exposed to natural air. And HP recommends keep printer to prevent dry ink clogging in the head. I understand everything power is suspended unless the circuit warming (and it appeared to work that way until quite recently).

  Although it made no difference, I just update the HP Update version 5 driver sent from Apple.  It turns out that it is the wasted effort, and I lost my custom configurations because the driver for my printer has not been updated for at least two years. He always uses the version 4.2.5 of the driver. (El Capitan is X.11.6 with the latest security updates).

  Printer works fine otherwise.  Suggestions?

  Yes, it made no difference. The façade has finally exploded but ocassion, it still ejects a sheet or two of paper.  Guess it's irreparable. I can live with. Works fine in the case.  Just close it as insoluble.