HP Pavilion: Computer says printer HP deskjet F2180 door open, but it is closed

Similar Questions

• my computer says printer ready, but when I try to print it does not say connectedit is a HP 3000 3 month old.

  I have a wireless printer. On the computer it says ready, but when I try to print it says not connected. Help

  Print a Network Setup page using the controls on the front panel of the printer.  See your manual for details.  Some newer HP printers have very summary User Guides (if you have the Deskjet 3000 J310, this means you) and it is difficult to see how - or if - you can print a Network Setup page.

  What you want to do is (a) determine the IP address that is currently configured in the printer and potentially re - configure an IP address of your choice.  You may need to search in the help for the printer on your computer system.  You may be able to access the printer setup utility using your Internet browser or you need maybe connect you the printer to the computer via USB and use the printer installation CD.

  Once you know what the IP address of the printer (and, preferably, how to change), then...

  On your computer.

  • Click Start > printers and faxes
  • Right click on your printer icon, and then select Properties
  • Click on the Ports tab
  • Taking care NOT to click in the list of ports (where you might accidentally change something), click Configure Port
  • Compare the IP address in the box "printer name or IP address.
  • If the IP in the box is not the same as the one you have determined for the printer, make sure.
  • OK your way out and you should be able to print.

  Now... If the above has solved your problem, you might want to know why and probably would like to know how to prevent it from happening again.  Him 'why' is normally your wireless router automatically sets the IP address of the printer.  If you turn the printer off, there is no guarantee that the router will assign the same IP address when you turn back on it, especially if the other devices were connected to your router in the meantime.  There are two methods to deal with this.

  One, you can check the checkbox in the tab "Configure Ports" which always says 'print to this device, even if its IP address changes.'  This is a feature that the HP printer drivers have, but in my experience, it is not reliable.  It works probably better if you change the contents of the box of the IP address of the printer "hostname."  This is something that you should be able to find in the printer setup utility accessed through your web browser.  It is NOT the name of 'Port' that appears on the "Port Configuration" tab in the area above the IP address.

  Two, you can change the way that the printer receives his usual default IP (automatic) address manual, otherwise known as a static IP address.  If you do this, you will need to choose an IP address that is in the same subnet as your router (this means that the first 3 of the 4 series of numbers of the IP address must be the same).  For example, if the IP address assigned to your printer is 192.168.1.105, then any IP address that you select for use as a static IP address for this printer must begin with 192.168.1.  The last part may be any number of through254 2, EXCEPT that it may not be a number this router can assign to something else.  You will find this bit of your router configuration utility.  Or, if your printer was awarded automatically an address with the last part as 100, 101, 102, 103, etc, you'll be pretty reliable if you choose a number far away, but still within the range (for example, 25, 50, 200).

• HP Deskjet F335 all-in-one: Troubleshooting computer says printer is disabled

  I am trying to print but I get the message of my printer is offline.  I ran the troubleshooting tool and the message that printer has been turned off returned.  The printer is on and I can print the test since the HP Solution Center page

  Hello! Welcome to the @Hermosu forums

  I read about how your printer shows offline on your Windows 8.1 System. I have posted a link below with some troubleshooting steps to try, and then you should be back running.

  Your HP printer print jobs are stuck in the print queue

  Good luck

  

• I accidentally deleted my printer HP deskjet F2180 of printers and fax machines.

  How to restore the printer above. I don't know where is the original installation disc.

  Help

  If you want to say that you just clicked on the icon for your HP F2180 and choose 'remove', you don't need the floppy, and you don't need to download anything.  Simply connect the printer to the computer and it should be recognized and installed automatically - because the removal of the icon of the printer has not, in fact, deleted the printer driver.

  If necessary, perform the following steps and install your printer:

  1. disconnect the printer from the computer
  2 reset
  3. connect the printer to the computer

  If this does not work, you'd better explain exactly what you were doing to accidentally delete the printer, as well as what happens when you do the 3 steps above.  If you receive error messages, please do not paraphrase.

• Envy4500: Computer says printer is offline and will not print, but it's online

  I jumped through all the hoops of tech and there seems to be no perfect solution to this problem. However, can I change my settings wireless direct on with security on without security on Off, and at any time, I am doing this, work in Quebec will begin. But I have to do it almost everytime I have print something. I need to scan from my remote IO. Let me know if HP has a better solution. Obviously, the computer is not properly talk to the printer. I started having this problem after Windows 10, but yet curiously, so I don't think it's a matter of Windows.

  Hello
  
  Thank you for using the HP Forums.

  You can try this:

  Creating a TCP IP port
  
  1. print a Configuration Page to get the printer IPv4 address (you can also tap on the icon wireless on the front panel of your printer to obtain the IP address)
  2. on your PC, go to the Panel control, devices and printers, right-click the printer and on the left, click printer properties, select the Ports tab.
  3. click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.
  4. Enter the IP address of the printer.

  Note that you can ALWAYS go back to the original port the HP software installed by selecting the HP port on the Ports tab (in the properties of the printer)

  Hope that helps!

• Computer says printer not connected

  Hi-

  I use a HP Photosmart C4280 and run OSX 10.9.4.  My computer always tells me that the printer is not connected (I checked the power and the USB connection and both are good).  When I go to add the printer in system preferences no choices appear.  Can I/how can I reinstall the printer driver?

  Hello amemoliand welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you have connectivity problems.  I would like to help.

  I suggest to remove the printer from your printing system, using this document: uninstalling the software of the printer.

  Once you have deleted, I suggest to check and repair disk permissions: function to fix the permissions of all utility disk drive.

  I also run your Apple updates: OS x: Mac App Store apps and OS X update

  After the updates, I recommend you time the printer using this document on v10.9 OS X Mavericks: installing and using the printer on a Mac.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• HP Officejet 4630: queue the computer says printer is offline

  I have a laptop windows 7 (Levono) and a 'new' printer HPOJ4630 I received from HP, when my other original had to be replaced.

  I did the installation to download on my computer.  I did the install printer and HP Network Conf Page shows the printer is connected to the Internet, and the status of the network is ready.  However, when I send something to print it does not print and the computer queue wrote in offline mode.

  I need to use the printer without delay.

  Please HELP, your answer asap would be appreciated.

  Thank you for your answer, luckily I found a way to fix right after that I wrote the post.  Don't ask me how, but I managed to solve the problem.

  My printer is now working with my laptop perfectely.

• computer says printer shuts off when it is on

  My computer is telling me that my wireless printer is turned on when it's plugged in and that the WiFi icon is turned on.  What can I do to make my computer recognize my printer?  They are both HP and I am running windows 7.

  A wireless printer is deemed be a printer "networked."  You need to check the settings of the firewall on your computer (in Control Panel) and make usre you allow the printer driver to pass thorough.

• can not print says printer connected to the wireless network but pc says printer is offline

  happened before the printer says connected to the network but pc says offline

  Ok

  Have you tried the Network Diagnostics to see you the network can see the printer

  Go to www.hp.com/go/tools

  Network Diagnostics has a link to the wireless printing site that can help out you.

• My computer says it is running service pack 3, but I noticed that two service pack 2 were installed. Is this right?

  My computer has terrible fonctionnee and will not at all.  There a lot of errors blue screen and constant freezes.  It happens all the time.  The fact that service pack 2 is installed would be part of the problem?  Also, is it OK to enter the program records to remove a program if it does not appear in the section install/remove?  Thanks for your help.

  Hi RonGerdes,

  1. where to find two entries for service pack 2 on the computer?

  2. Since when are you the bluescreen or constant freezing on the computer?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  If the previous step fails, then check the event viewer to determine the cause of the blue screen on the computer and post back with the details.

  Procedure to view and manage event logs in Event Viewer in Windows XP

  http://support.Microsoft.com/kb/308427

  The recommended method for uninstalling any program using the Add/Remove programs in the control panel or by using the uninstall program provided the program provider.

  First, you must uninstall the program by using the Add/Remove programs in the control panel and later, you can remove the program files folder.

  How to manually remove programs from the add tool / remove programs

  http://support.Microsoft.com/kb/314481

• My computer says Im running is not genuine windows, but I bought my computer new laptop it was pre installed how I checked it

  I bought this new computer from harvey norman is a sony vaio (I have no idea what anyone else). It came with windows installeded on the computer. now, whenever I start my computer it tells me it is not a genuine copy. How to make this verified as authentic.

  "Tash71" wrote

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Validation caching online Code: N/a, hr 0xc0000022
  Windows product key: *-* - WJ2H8 - R6B6D-7QJB7
  The Windows Product Key hash: ckKNc + BBPDWmo1LUlOkraNjlQ34 =
  Windows product ID: 00359-OEM-8992687-00006
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.003

  Other data-->
  SYSTEM >Packard Bellimedia S3810American Megatrends Inc.. P01-A1 20100331000000.000000 + 000

  License data-->
  On a computer running Microsoft Windows non-core, run ' slui.exe 0x2a 0 x 80070426' to display the error text. "
  Error: 0x80070426

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0 x 0001000000000000
  Event timestamp: 3:14:2012 21:25
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered Service: sppsvc

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value

   

  The Service for the Protection of software does not...

  Click Start
  in the search box, type
  SERVICES. MSC
  and press the Enter key - accept the UAC prompt if you get a.
  Look in the console for the Software Protection service, right-click on it and select Properties.
  Make sure that the Startup Type is set to automatic (delayed start) and click on apply.

  Try to start the service now - do you have an error message? It starts? He almost immediately stops again?
  Post back with your results and a new report MGADiag.

  If it doesn't start, then please do the following...
  Please, open an elevated command prompt window (Administrator) and use the following commands...

  net start sppsvc
  sc qc sppsvc
  SC queryex sppsvc
  SC qprivs sppsvc
  SC qsidtype sppsvc
  SC sdshow sppsvc
  
  Copy and paste the results in your response (to copy the results... click the black and white icon in the upper left corner and select Edit... ('Select All' and press the Enter key - and then use Ctrl + V or right click + Paste to paste in your response), and the EXACT error message you get when you try to start the service from the Service Control Panel...

   

   

• Hp deskjet printer: Hp Deskjet Ink Advantage 2515 printer scanner copier.

  Hi, my printer Hp deskjet 2515 ink advantage does not work on my laptop. my laptop is acer and windows 7 ultimate.

  the printer is not printing and copieying... What would be the problem and what is the solution.

  my laptop says that the tray must be open, but its already open, and if we use the copier it says his blocking and his flashing and there is a! sign like that.

  Thak you very much hope, can you help me

  Hello @renzy ,

  Welcome to the HP Forums!

  I understand that you get a message to open the output tray or a similar message on your Deskjet Ink Advantage 2515. I hope to help you!

  Try to open the exit tray and ink cartridge door.

  Then close the print cartridge door.

  Do a power reset to see if that will solve the problem:

  Press the power button to turn the product on.
  With the product, unplug the power cord from the back of the product.
  Unplug the power cord from the wall outlet.
  Wait at least 15 seconds.
  Plug the power cord into the wall outlet.
  Reconnect the power cord to the back of the product.
  If the product does not light by itself, press the Power button to turn it on.

  Make sure that the printer is connected directly to a wall outlet.

  I hope this helps!

  If the problem persists, give us a call directly on your printing with HP options.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

   
  

• HP Photosmart C5180 all-in-one: computer says magenta ink is empty, but it's not.

  The computer says that the magenta ink is empty, but it's not. Black printing is only possible. When I I use the HP Solution Center and do a test print, it prints all colors with no problems. I can´t find the program that made this error.

  Hi there @Tsuriman,

  Welcome to the forums!

  I read your post on your Photosmart C5180 showing you the magenta is empty, without. See the instructions below to try to fix the error message! If the problem persists, give us a call to see what your printer options are next with HP.

  Join our technical support to the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  If you want to send me a 'thanks' to meet your concerns today, click the thumb upward below!

  

  HP Photosmart C5100 all-in-One Printer Series - "Ink cartridges are empty" Error Message

• Cannot install Laserjet 4 on xp HP Pavilion computer.

  I try to install my HP Laserjet 4 on my HP Pavilion computer.  I bought two new, years ago, but they were never together until now.  The computer was in my office and the printer was at home.  The printer was working on a different HP Pavilion for a long time and it now works when it is connected to other computers, so I know it's good.

  I downloaded ljJ632en.exe on the site of HP drivers.  I ran that file and unpacked the 29 files to c:\lj632 and reported it was done.  The printer is still not recognized by Notepad or Word.  I tried to restart and did the download and he ran three times, sometimes with some afterwords restarts and sometimes without.  Should I sent the files downloaded to another location?  Is there something else I'm missing?

  The operating system is Windows XP, Version 2002, Service Pack 3.

  I'm puzzled.

  Thank you, Magali.  Your solution did not work because the Panel did not show my printer in printers and faxes.  Your answer has led me to try the function of adding new hardware and it worked.  In case someone else needs to use it, here are the steps:

  Control Panel

  Adding hardware (opens the Add Hardware Wizard)
  Next
  Yes
  Next
  Add a new hardware device
  Next
  Find and install automatically
  Next
  If the printer is not found, click Next
  Printers
  Next
  Use the following port: LPT1
  Next
  Highlight in the left for HP
  Highlight as part of right for HP Laserjet 4
  Next
  Keep the existing driver
  Next
  Print a test page
  Finishing.

  David

• Computer Vista will not print to Deskjet 930c on home network

  Our three computers (Vista is A, B, and C are XP) are connected to a wired network of private home.  Computer A has a Canon printer that is shared and all 3 computers can print to that very well.  Recently, we re-gasket a printer HP DeskJet 930C to computer B (via USB) and shared.  Computers, B and C can be printed on the HP very well.

  But, even if A computer can see the printer, it will not print.  He seems to accept the print command and sometimes a dialog box flashes on and so quickly as it cannot be read, but nothing prints.

  I worked through the Microsoft article "File and sharing printers in Windows Vista" at http://technet.microsoft.com/en-us/library/bb727037.aspx#mainSection and you don't see anything that solves the problem.  I ran the doctor of printing & scanning HP and who wrote the 930C is installed but not connected.  According to the website of HP, Vista has the correct driver.  I have uninstalled and installed the printer from computer A, but it still does not work.

  So I called HP Support, and they said that I had done all the right things, and "it must be a registry problem.  This seems unlikely to me, and I don't know where to look in the registry.

  Any ideas or solutions?

  Hello

  Windows XP sharing can be done automatically in XP or operating systems, XP does not host the drivers for the newer Vista operating systems and so you will have problems with some models.

  To manually add the shared printer, follow these steps:

  1. install the printer locally in following second method: connecting the cable in parallel below:

  http://support.HP.com/us-en/document/c01655752

  2. go into your PC host (computer B), right click my computer and select Properties.

  Find the name of computer on this screen.

  3. go in Control Panel > printers and faxes.

  Right-click on the printer and select Properties.

  Open the tab end hand note the share name

  Note: I would say keeping the name of sharing as simple as possible (e.g., 930C)

  4. go to your Vista machine and open Control Panel > printers.

  Click with the right button on the 930c configured in step 1 and select Properties.

  Open the Ports tab.

  Click Add a new port.

  In this list, select Local Port.

  Set the local port in the form of \\Computer B Name\Printer share name (for example \\PC-P\930c).

  Confirm the changes and check any change.

  If you have still any question, I would say that the printer is connected to the Vista machine, then share it with the XP PC and check for any changes that should run more easily from my experience.

  Shlomi