HP Deskjet F4480 shoots blanks

Similar Questions

• HP Deskjet F4480: Can I use just black ink in my printer HP Deskjet F4480?

  I have a HP Deskjet F4480 printer.  I only use it to print in black ink.  Is it possible to use only black ink in the printer (which is much cheaper)?  Thanks for any help you can provide.

  Grayscale is more useful for printers that have four or more cartridges. You can find on the feature by clicking on this link, but I'm not positive how useful it will be for you.

  Insert a black cartridge in the color slot will not have to act as a backup cartridge. The printer will see that it is not a color cartridge and refuses to read or use it.

  Please let me know if that solves your problems.

• hp deskjet F4480 printer: Hp deskjet F4480 printer

  I would like to install a printer hp deskjet F4480 on my new computer hp pavillion laptop.  the install cd says it's for XP, Vista, windows 7.  How to use this printer with my laptop?

  Use the full functionality of the section of this site drivers installation software:

  http://support.HP.com/us-en/product/HP-DeskJet-F4400-all-in-one-printer-series/3742084/model/3742085/drivers

• HP Deskjet F4480 multifunction: Session of scan on my HP Deskjet F4480

  While I was going to end my session of scanning of 33 photos to my computer, Windows 10 has experienced a breach which caused my system to freeze and forced my laptop at the restart/reset and this process my session was forced to stop because I had lost my connection and had to wait for Windows 10 have restarted , but once this has been done, and I have opened the HP Digital Imaging Monitor, my scanned photos were not where. So, what I need to knowis if photos have been saved or stored at any tme during the analysis session or are they not saved until the end when you're done the scan, which would mean that all the work I've done and the time, I spent scanning, was nothing more than a waste of time?

  Thanks in advance for any information your long enough to help me find an answer and solve this problem

  Hey @Sandalwood,

  Welcome to the Forums of HP Support!

  I understand that your Windows 10 PC crashed when scanning photos of Deskjet F4480 all-in-one printer. HP Scan does not save the file unless you click the save button. You will need to scan your photos again.

  Please let me know if that answers your question by clicking on accept solution and if you appreciate my help by clicking the thumbs up icon. The two icons are below this post.

• HP deskjet f4480 printer range: cover open Message, hp deskjet f4480 printer

  Hello

  I accidentally broke the door sensor for my printer.

  The solution says: "Open" and it will not be printed.

  I tried to install the broken sensor myself, that says 'C 15' on it.

  but I have no idea where it is supposed to go.

  Thank you.

  Hello @Jen91,

  Welcome to the Forums of HP Support!

  I understand that you have a sensor of door broken on all-in-one printer, HP Deskjet F4480. Unfortunately, the door sensor is not replaceable part in your HP Deskjet printer. Therefore, to correct the error message 'Door open' on your printer a whole unit replacement would be necessary.

  I recommend at this point, contacting the Technical Support queue by phone to explore hardware options.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  I wish you good luck going forward with this!

• Cannot get mac to install my accept my HP Deskjet F4480

  I bought a computer mac laptop and have a mac desktop computer.  The HP Deskjet F4480 came as a promotion for purchase.  I installed the disk that came with it and who says series HP Deskjet F4400 Mac OS X v 10.4 10.5; version 10.0.  My desktop runs Leapard Mac OS X Version 10.5.8.  My laptop is running the same version.

  The printer does not appear, so I check the box that says the printer is not listed.  It appear the printer.  I get the following error message when I try to add a printer:

  Your device is not listed, it is not supported, it is not supported by the installer.

  I downloaded the disk HP downloads software, but I get the same message.

  What can I do?  Is there some type of patch or setting on my computers that needs to be changed?

  As the drivers of your printer (printing and scanning) are loaded in 10.6, I would uninstall all software from HP which is on your Mac.  Use the application uninstaller in Applications HP > Hewlett-Packard.

  Then, do a software update (Yes, again).

  Reset the printing system, then add your printer via the sign '+' in print & fax.

  One last thing - is known to be good USB cable and you're not going through a USB hub, right?

• HP Deskjet F4480 conflict printer driver

  Printer HP Deskjet F4480, Windows 7, driver conflict error

  When I could not print, I ran the HP diagnostic tool, who met a driver conflict.  I followed his instructions and uninstalled the current driver and reinstalled the latest driver, but I still cannot print.  I restarted the diagnostic tool again with the same result, met a driver conflict.  How can I get rid of the conflict driver for my printer?  Thank you.

  What you describe, it seems that the USB cable is connected to the computer until the installation software asked for the connection.  In this case the generic Windows drivers and the HP drivers will try to install and collide with another.  I would like to Uninstall the printer and software.  Then reinstall of a fresh software download and make you wait for the software to ask the USB connection.  Let me know what happens.

• DeskJet F4480: full black print cartridge still does not print black. Colors OK.

  What the title says. All of a sudden my Deskjet F4480 does not print black. All cartridges are almost nine (changed recently, bought at Staples). Colour printing is OK. Print a page with black text and results in only the images printing color images. I only went through all the steps of cleaning cartridge several times, no difference. There is no error message, just black not appear do not at all.

  And... Here is the solution.

  Funny how I found an explanation of the problem and how to fix it on a different printer manufacturer's Web site, but not on HP... But I digress.

  The black cartridge has been blocked. The way of difficulty is:

  1. remove the faulty cartridge from the printer.

  2. place a small amount of boiling water in a cup (about 1/4 in.) and dunk of the print head (the part where the ink comes out) in warm water for a minute. Do not immerse the entire cartridge in hot water, just the print head.

  3 take it out, pat against a paper towel, observe the model ink left in the cartridge on the towel. If too little / interrupted, dunk again in hot water for another minute, pat again. You want to get an unbroken line of ink through the length of the print head. Repeat as needed (I did 4 times total).

  4 cartridge Pat dry everywhere, put it back in the printer, run cleaning cycles (1 - 2).

  5. If still not good fixed, take out the cartridge and repeat 2 (I had to do it again).

  You will lose little ink, cartridge of bad and good a well (you can not run cycles with only 1 cleaning cartridge), but at least you won't have to throw a nearly full cartridge.

• I have a HP Deskjet F4480. It will print not web searches in IE 9 - 64 bit, only in 32 bit.

  If I switch to IE 9 to 62 bit version, my web to print disappears.  for example, I can't print Google Maps.  32-bit, everything works fine.  I'm on MS Outlook 2010 with Windows 7 Home Premium.  What is the reference for this?  The error box says:

  Line: 2126

  Char: 1

  : Error unspecified.

  Code: 0

  URL: res://ieframe.dll/preview.js

  Do you want to continue running the script on this page?

  Yes No

  Looks like you have the 64-bit Internet Explorer script error.

  Honestly, the 64-bit web browsing has not yet reached its cruising speed that not all web pages is configured to run with Internet Explorer 64-bit.  64-bit navigation has come a long way, but there is still a lot of work to do before it's also compatible with web sites like 32-bit browsers.

  This Microsoft document discuss the matter with a little more detail.  They suggest updating the driver first, but I have not seen this solve the problem that leads me to believe the issue is not with the printer driver.  This does not mean he does not and is not worth a try, but my experience this always ending by using Internet Explorer 32-bit to make any impression of web pages.

  The last driver for Deskjet F4480 and Windows 7 64-bit is dated 2009.  More than likely, you already have the latest driver.

• Printheads can not be cleaned (Deskjet F4480)

  I have a Deskjet F4480 printer, which remained a little.  I installed in on my Mac running 10.7 (Lion).  Tried to print a test page and it cannot print anything on the page.  I tried to clean the print heads using the HP software, but he failed and instructed me to contact HP support.  The printer is out of warranty, so I can't contact them easily.

  Any advice on how to get the printer working again?  Ink tank is fine, but I can also replace cartridges if necessary.

  Thank you

  Annie

  Sorry to hear that you are experiencing this issue. Here is a link to a document that explains how to manually clean the cartridges and more important still, the contacts inside the machine. Which could help because the print head cannot be purchased.  It also tells one what cleaning supplies to use the printer. Here is the link http://support.hp.com/us-en/document/c00864517

• All-in-one printer, HP Deskjet F4480 cannot print from the INTERNET?

  You encounter problems, printing from the internet HP Deskjet F4480 all-in-one printer?

  Sometimes nothing prints, part of the page is missing, print headers only and etc. No worries, I have a document that can help you with this problem.

  This link will provide you with the differenct steps that will solve this problem.

  http://support.HP.com/us-en/document/buu01105

  If you have any questions, feel free to ask. I hope this helps.

• HP Deskjet F4480: HP Deskjet F4480 scanning failed, re - load the disc has not

  Several scans immediately followed by a sort of message "software may be unavailable.  Analysis of the work stoppages.  Re-boot does not work.

  Has decided to re - install the drivers.  Download "HP Deskjet F4400 all-in - One Printer Series full feature software and driver...» ».

  Installation fails with "cannot access the registry key 'HKEY_LOCAL_MCAHINE\SYSTEM'.  Uninstall fails to 54% in step 9 of 11.

  MS DeviceCenterDiagnostic.xml and PrinterDiagnostic .xml both fail with the error 0x803C010B.    Hmmm, the common theme here is 'failure '.  Stories of success there?

  Hello @notamused,

  Welcome to the Forums of HP Support!

  I would like to help you today with the Setup error: "unable to access the registry key 'HKEY_LOCAL_MCAHINE\SYSTEM' when you try to install the HP Deskjet F4480 all-in-one printer on your computer Windows 8.1. Can I please have performed you the steps below.

  Step 1: Work around error:

  1. Run the installation again.
  2. When you get the error screen again please press on and hold the keys SHIFT and Ctrl at the same time
  3. Click Cancel
  4. Installation should ignore the screen of the error and continues from there until the end.

  If your error still occurs, please follow the steps below.

  Step 2: Uninstall the drivers:

  Please click here to load the Microsoft uninstall tool. Once the site opens, select the button run now on the right. Enable the Microsoft Fixit Tool run.

  At the prompt, run the recommended patches. Choose that you need help with uninstalling. You should be brought to a list of programs. Scroll down the list until you see you package install HP Deskjet . Select your Deskjet, and let Microsoft Tool to remove this package.

  Note: The Microsoft uninstall tool will also fix corrupt registry keys that might contribute to your error.

  Step 3: Delete the temporary files:

  1. Open your Startup screen by clicking the Windows button on the lower left of your screen, or by selecting the Windows key on the lower left of your keyboard to the right of the Ctrl key.
  2. Once the splash screen opens, type RUN
  3. Click Run to open the Run dialog box
  4. In the run box, type %temp% , and then click OK
  5. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  6. Select the button delete on your keyboard. This folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A file should always be used you automatically gets the option to "Skip" this file.
  7. Close the Temp folder
  8. Right click on your recycling bin and select empty recycling bin

  Step 4: Reinstall the drivers:

  1. Please click here to download the appropriate drivers for your printer
  2. Once the site opens, click on the download button at the top left
  3. Allow download the run when prompted
  4. Once the download is complete extraction will occur and the installation window will launch
  5. Please follow the instructions on the screen to reinstall your printer
  6. Do not connect your cable USB before installing invite you to

  Once installation is complete, please test you print and scan features to ensure that your printer works according to normal.

  Please let me know if the steps I have provided solve your installation problems. I look forward to hear from your part, have a Happy New Year!

• Index cards will not print to Deskjet F4480

  I'm running OS X 10.6.7. I use a HP Deskjet F4480 all-in-one printer.

  I am trying to print on 3 x 5 or 4 x 6 cards, and even if the printer recognizes these sizes, it does not print on the cards correctly. Instead, he spits them simply white.

  I had to go to work today before I could try the same size of page in another program. Everything that I tried this on is Word 2011. Using a simple program like TextEdit can produce better results? What should I try?

  lamcqueen-

  What are the settings in the Page layout Word box?  The settings are applied to the "Format for: any printer" or your Deskjet F4480?

  Does anyone else have any other thoughts? -Randy

  -----------------------------------------------------------------------------------------------------------------
  If this was helpful, please consider clicking on the White Star of Kudos to the left.

  If this provided the answer to your problem, and you were the one who started this topic,
  Remember to mark this message "Accepted solution" to help others in the future. Thank you!
  -----------------------------------------------------------------------------------------------------------------

• installation a hp deskjet f4480, when I plug in the usb cable, my computer cannot find the printer.

  I have an hp computer, product number NY545AA #ABA, with windows 7, 64-bit and a hp deskjet F4480 printer. During the installation of the printer, I get to the screen that you can plug USB cord say printers and after about 2 minutes. It says no device found. The USB cord is plugged into the printer and the computer, the printer is on. Finally, I have checked, add a device later. I fight the computer and printer together, about 3 years, the printer never worked. I have downloaded new software and the HP driver for my printer, 1 week ago, it did not help.

  Try to use the other USB cable

• Problems installing HP Deskjet F4480

  I've installed, uninstalled, installed, uninstalled my HP Deskjet F4480 I bought again today.  When I go to HP Solution Center and click on Scan I get an error: a required software component cannot be found or has been incorrectly installed.

  Information relating to the error 8, [(8,0,0]

  When I click on print, then get an error that says hpqcutil.dll was not found.

  I tried to download it yourself... I worked on it for 3 + hours today.  Please help me.

  Thank you.

  On your printer software CD, locate a uninstaller "L3".  Run it.

  Now, download the software from the hp support site.