HP Destjet F4280: function scanner lost on my HP Deskjet F4280 printer

Similar Questions

• 8610 printer: I lost the admin password on my printer Hp 8610. Help!

  I lost the admin password on my printer Hp 8610.  Help!

  Hello @bDannyman,

  I understand that you lost the administrator password that have set you up on your HP Officejet Pro 8610 e-all-in-one printer. I would like to help you today with resetting the password on your HP Officejet.

  Unfortunately, the password is in the programming of your printer. Therefore, in order to reset the password for you to use all the features of your machine once again, we have to run a programming semi full reset. This reset will cause your printer to 'think' it starts for the first time again.

  Please check your private Messages for instructions on how to perform semi full reset.

  Good luck!

• Descjet HP 2050 all-in-one: I lost the disc to connect my printer to my computer

  I lost the disk that connects my printer to my laptop and got a new computer and need to print but I cannot connect to my new computer! How can I get a new drive or connect my laptop to my printer without spending too much money and do not buy a new printer?

  Hello

  The drive is probably obsolete now. Please download the software and drivers (for Windows) following and install on your computer:

  http://ftp.HP.com/pub/softlib/software12/COL32609/al-109407-3/DJ2050_J510_1313-1.exe

  Kind regards.

• When I installed my HP Deskjet F2480 printer/scanner, why not it seems in my HP folder?

  I just bought a new HP laptop with Windows 7.  I installed my printer HP Deskjet F2480/scanner on my new HP laptop.  I can print, but I can't understand how to scan.  To scan the I have to open the HP Deskjet F2480 printer/scanner application on my computer, but it is not located in the HP folder.  When I click on my departure, select button, select all programs, HP says it is empty.  I know that my computer recognizes my printer because it prints, but I need to be able to scan documents, and I have no idea how I can do this, can you please help me?  Thanks, Jim

  It sounds as if you have installed the base driver. There is more software available. What was download it should have been more than 117 MB. If the download was @ 37 MB, then it's the base driver.

  Here's How to remove the printer software from your PC.

  This is the full features software for your printer.

• I lost the hp software for my printer hp officejet 4500g

  I lost hp software for my hp printer officejet 4500g, the interface of the software that allows me to scan, print, import photos. Where can I download it?

  Hello:

  Please select the model that you have one of the options below.  Then select Download drivers and software.

  Select the operating system you have and you choose the full download of software features and the pilot.

  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&TaskID=135&prodSeriesId=3919445&prodTypeId=18972

  Paul

• DeskJet F4280 all-in-one: Deskjet F4280 print white

  Hello

  I just inherited a HP Deskjet F4280, printer all in one and put in place.  It auto downloaded the correct driver from Apple and added the printer in system preferences / print and fax.  I use OS 10.10 on a mini mac computer.

  I tried an alignment page and it prints blank page.  Goes through the motions as if it's really the impression, but the page is empty!  Tried a regular document via overview and MS Word, same result... blank page.

  I checked and the utility said all the cartridges are fine and have enough ink.

  I deleted the printer and readded twice and reset once the CUPS.  Same result.

  Any other ideas?

  Any help is greatly appreciated.

  Lisa

  Hello

  Please click HERE to access the procedure which should solve the problem.

• How to change font size Jason F4280 printer

  The font size is really small & so are my eyes! I have a HP F4280 printer. Is anyway I can enlarge or I'm SOL? Thanx

  Assuming that you have installed the complete software of features from the cd of HP or their site, all fonts are changed in whatever program you use to create documentation

• Canon MP970 Scanner lost functionality

  Hello

  With the latest version of the OS, seems to be looking for a driver that would allow me to use my Canon MP970 as a scanner and printer. Someone at - he found a solution?

  I found download PIXMA IP4200 authorized my camera to be seen and to mount after installing a driver who read "Canon MP970." After the Capture of Image opening, however, the device will not be displayed via the USB port.

  Device is recognized by USB when I Plug and unplug the device, so I'm not out there.

  Any advice is greatly appreciated,

  Mike

  To scan with Capture of Image, you need an ICA driver. The last package that comes out of the barrel which included the MP970 was for OS X 10.8. This can install and works on OS X 10.11 then here is a link to ICA v3.1.0 driver so you can try it.

  In the printer driver, you must be careful using a created driver for another model - mainly due to the installation of the ink tank. In case you have any questions, here is a link to the latest printer driver Canon published for the MP970, who was also for OS X 10.8 but should install and work fine on OS X 10.11.

• Toshiba All In One LX830 - function keys lost after installing Win 7

  With the help and patience, I got 8 Win replaced with Win 7.

  But I lost some of the control functions of the keyboard, specifically the screen brightness control.

  Does anyone know what steps should I take?

  I ran a proprietary driver program update that did not find a problem.

  Dave B

  I think that you have not installed the TOSHIBA value added Package for Win 7 64 bit

  Here you can download the
  [Toshiba VAP for Win 7 64 bit v1.6.0027.640202 | http://www.mytoshiba.com.au/file/download/resource/file/24876/tc30458800b.exe]

  Install the package and check if the FN keys would be activated.

• All-in-one Officejet 5610: function Scan lost after upgrade to Yosemite

  Lost the ability to analyze after upgrade, print, and copy works. Have already done everything suggested by Double-U-di in the Mac OS 10.10 post Yosemite and HP Printer Support posted on 30/10/2014: checking for updates Apple, printer removed from the queue, add printer back, reset the printing system, removed the HP software, repair disk permissions * manually installed HP printer drivers v3.0 and added to the queue printer. No change, printing & copying ok, but the scanner does not.

  During approval of the repair disk found a number of problems related to printing and presumably repaired, had more to do with the ' should be 80, group is zero ", but others as well.

  Anyone know what I can do, short of buying a new printer? I realize, it's a dinosaur - always attached via the USB port, but she worked just beautifully before the upgrade.

  Hello @DrBucky,

  Welcome to the Forums of HP Support!

  I understand that you are not able to scan from your HP Officejet 5610 all-in-One Printer to your computer Mac OS X 10.10. I would like to help you to solve this problem today. Thank you for all the troubleshooting steps you tried before reaching out for support. You have completed almost all of the recommended steps. However, the order in which the steps have been completed can cause some problems. Therefore, I will be having repeat you some of these measures to ensure that the appropriate driver is being used.

  Step 1: Reset the printing system and uninstalling the driver:

  It is crucial for the repairs we have a clean slate to work with. Therefore, I'll take you reset the printing system and Uninstall the drivers for your HP Officejet. Please click here for instructions on how to perform the reset and uninstall. Once the site opens, select the drop-down list for 'Mac OS X v10.6, OS X v10.7, OS X v10.8 and OS X v10.9'. Then, please follow the steps in the method 1 and method 2.

  Once steps have been taken, please proceed to the next step.

  Step 2: Check and repair your Mac disk permissions:

  It is very important to perform the audit before the repair. By running the check first, questions are found. Once all questions are found the repair process will correct these problems. By repairing just without checking first, questions may be missed.

  1. Open Macintosh HD and go to Applications
  2. Go to the Utilities folder
  3. Open disk utility
  4. Select the hard disk volume, you use (usually on the left)
  5. Select verify disk permissions
  6. Once this process is complete, select repair disk permissions

  Step 3: Manually install the driver Package:

  Please click here to manually download the package from Apple to HP v3.0 printer driversupdate. Once the site opens click on the download button at the top. Follow the instructions on the screen to install the driver package.

  Step 4: Check the Apple updates:

  1. Go to the Apple
  2. Select System Preferences
  3. Select software update
  4. Click update now
  5. Install your available updates
  6. Computer restart

  Step 5: Add the device:
  

  1. click on the menu of Apple , then Preferences System.

  2. click on Print & Scan and then check if the name of your printer appears in the printer list.

  3. click on the name of your printer, click the sign minus (), then remove the printer.

  4. click on the plus sign (), click Add a printer or a Scanner, click the name of your printer.

  5. click on the area of use or with the help of Print and then select the name of your printer on the shortcut menu. Ensure that the Officejet driver is selected.

  

  6. click Add to add the printer to the list.

  -Source

  Once your printer is properly added to, please try to scan the image. For instructions on the three supported methods of scanning without HP software please click here. The support document indicates that it is for Mac OS X 10.8 but the steps are the same for Mac OS X 10.10.

  Please let me know if a retry of the procedure described in this new order solves your problem of scan. Good luck!

• Function paste lost

  G5350uk desktop PC

  Windows 7 64 bit

  I lost my function paste!  I can copy but not paste (unless I'm in Word, and then I can use the Clipboard).

  Does anyone have ideas how I can get it back please?

  Your help will be appreciated.

  After trawl by othe forums like this, I came across a suggestion that, if you're using 'Advanced System Care PRO' of a company called IOBIT, then this can cause then paste the function to stop working.  I removed CSA and, of course, the function paste has been restored. -yay...!

  I wrote to Iobit to let them know about this problem then I hope they find a solution to this problem soon - or they will lose sales.

  Sorted

• Function keys lost after installing XP on Equium A200 PSAF5E

  Hello
  I installed Xp on my Equium A200 PSAF5E and there goes MUSH FASTER!
  But I lotso function keys, I was expecting
  Any idea on how I can put them up yet? Any software, driver or what else?

  Thank you
  Simone

  Hello Simone

  If you want to downgrade OS on your Vista preinstalled laptop, it's very important to do BIOS update. If I remember correctly, it must be updated to BIOS version 5.20. Please check on the Toshiba download page.

  After the BIOS update, please install all the stuff of the Toshiba download page according to document Instructions of facilities. The order of the facilities is very important. In this case, everything should work well.

  Please be careful with the update of the BIOS. Download update for your model of laptop tracking number PSxxx. Before you begin to update BIOS don't forget that the laptop is connected to the power supply current.

• Function scanner on HP Color LaserJet Professional CM1415 MFP

  Hello

  I use HP Color LaserJet Professional CM1415 MFP and incidentally to uninstall this program and please advise how to reinstall it on my desktop so I can use the scanner.

  Concerning

  Bill

  billmark,

  Here is the link to the printing software.

  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=4089171

  I hope this helps.

• Install the drivers for scanner and Fax for HP PC 2410 printer all-in-one

  I use a MacBook Pro with an operating system of El Capitan 10.11.4. I use a PC HP 2400 All in one printer/Fax/Scanner connected by USB to a network of airports Time Capsule. During the installation of the printer driver, the printer function to add printers and Scanners folder in preferences systems found the printer and installed the drivers. The same add function printers do not thin either driver Fax scanner. How can I load these drivers.

  Hello..

  Re download the drivers once again and then try to add scan and fax again drivers.

• HP Deskjet 3054: Printer works but not the Scanner (device not found)

  Configuration: Windows 8 Lap Top with a HP Deskjet 3054 directly connected via USB

  Printer - it works

  Scanner - when you run the Application "Hp Scan and capture ' it comes back and says"device not found ".

  I tried - I ran 'HP print and scan doctor '.   Everything is OK except the "HP Scan".  He said that it was not able to find the HP Scan software on my computer.   When I went on HP customer support site to download it, I couldn't find it.  There is nothing that I could see which says "HP scanning software".   So this software HP Deskjet full functionality and drivers what I should download and install?

  BTW, the "HP Scan and Capture" application allows to work perfectly.  Not sure why it isn't now.

  Hello

  When changed the type of network to a USB connection? scanning HP and Capture app support network scanners, it does support a USB connected device:

  http://support.HP.com/us-en/document/c03478505

  In the HP Deskjet 3050 software select scan a Document or Photo and check if this can work...

  If the same persists, unplug the USB, uninstall the HP Deskjet 3050 basic software drivers from programs and features, then download and reinstall the most comprehensive software features again.

  If you prefer to continue to use the HP Scan application capture &, open the HP Deskjet 3050 software, click the utilities tab, click the printer installation software & and select Convert USB wireless to connect the printer to your network. then the Scan & Capture app should detect the scanner.

  Shlomi