HP dv6 2113sa only safe mode pavivlion

Similar Questions

• card installation causes the only safe mode startup

  After a driver to install my card from his Creative SB2 worked well. The day of juxtaposing it wouldn't work. Later, the only safe mode startup is cured by disconnecting the sound card. Could he have gone wrong or how do I get that back to work?

  Hello

  I suggest that you contact the manufacturer of the sound card. the sound card is may be defective. Contact support for sound blaster creative audigy 2 at the following link:

  http://us.creative.com/contactus/techsup/welcome.asp?h=5

  Hope this information is useful.

• Windows Vista does not start - only Safe Mode

  Hello

  Windows Vista does not start. Starts only in Mode safe. Same system of recovery is not backward by date

  Press F8 all turn the laptop.
  Choose the first option: by computer repair and try to repair the operating system automatically.

• Issues commissioning of systems - only safe mode is available

  Any ideas to overcome my problem of system startup?

  I've only been able to boot up my laptop in SafeMode today.
  Attempts to solve this problem by removing recently installed the software and try a system restore to a date prior to any change in the system have not been able to solve the problem.

  I followed the recommendation of the systems diagnostic utility looking at but am not really sure what I'm supposed to be looking for.

  Working on a computer in safe mode is not a long-term option!

  Hello

  I agree with you working in safe mode is not a really a solution but why don t you reinstall the entire operating system?
  For me it of the best way to bring the laptop and the dos operating system to life
  Usually after the use of the installation of laptop recovery should start like a dream ;)

  If there is no hardware malfunction everything will work ok

• My computer only starts only Safe Mode

  Yesterday, I had no problem with a normal startup of windows vista Home premium, but late in the evening, it was not react to anything that either, so I turned off my computer by pressing the power button. This morning I wanted to start again, but after the windows loading screen, I got a black screen for a minute or 2, then it is restarted again. the only way I can go into my computer is in safe mode, which works very well. I can't remember where I left my installation CD, because this computer is quite old already (for one computer) what to do?

  Hello

  Here are three methods that you can try to solve your problem

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode (which you are already in)

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu, type in msconfig
  4. Then press enter on your keyboard.
  5. The System Configuration utility opens
  6. Make sure that Start Selection is set for Normal start.
  7. Click the Startup tab.
  8. Make sure you start is not checked
  9. Press the apply button and then press the OK button.
  10. Click the restart button to restart your computer.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If these methods do not fix the problem, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  You can borrow a Microsoft DVD from a friend, if you do not or can not find yours.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  See you soon.

• CD and dvd only read some disks. Can read the disks using only safe mode

  CD and dvd only play old discs.  Cannot install new software.  in safe mode may start to read and install the software however need internet to continue.  Safemmode with networking won't read disc's

  http://support.microsoft.com/fixit/default.aspx.  It is new and fully automated Microsoft Portal. It is free and can help you solve more problems with just a few mouse clicks.  TO BOOKMARK! "THE BEST THING TO DO IN THIS WORLD IS A WRONG ANSWER! "I"DON'T"WINDOWS...". »

• HP 15-r203nv: model: 15-r203nv keyboard works in the bios and only safe mode.

  Hello there is a problem with this laptop, the work of keyboard in the bios and in safe mode and during my convalescence... but it does not work in normal mode. (F12 wifi light is white)

  Thank you very much

  model: 15-r203nv rev: 2213-120 products: L0E81EA #AB7

  Hello

  The fact that it does not work with a clean install starts to point to some kind of hardware problem, although it is strange that he will run in Mode without failure.

  Click with the right button on the taskbar, select Manager tasks, click the Startup tab - right click on each entry in turn and select Disable.  Once completed, restart the computer and see if there is no change.

  An update of the bios (F.39 Rev.A) is also available on the Product Page , which can be useful if you have not already done it - if you decide to apply, make sure you unplug all the devices (including the usb keyboard) before starting the update.

  Kind regards

  DP - K

• Qosmio F50 - BSOD after loggin into Windows and only safe mode works

  Hi all!

  I have read many posts on the forum and they are all a great help... very good community... but I fear now, I'm the one who has problems ask for help...

  I have a Toshiba Qosmio F50 with Windows Vista and I've updated 3 days ago the pilots of the BIOS, Fingerprint Software and software of face recognition to the latest versions with updates on the official website of toshiba. After that, I got a blue screen, 4 hours later, and since then I connect just Windows and 10 seconds later... BLUE SCREEN! and no other choice than to unplug the computer and switch off. I can only log in Mode without failure.

  Unfortunately I can't get windows to a State of previows that I don't have the option to save backups of active recovery.

  I have some windows system errors in case the Manager and that's what they say:

  *-------------------------------------------------------------------------------------------------------------*

  DCOM got error "1068" try to start the service fdPHost with arguments "" to start the server:
  {145B4335-FE2A-4927-A040-7C35AD3180EF}

  DCOM got error "1084" try to start the service EventSystem with arguments "" to start the server:
  {1BE1F766-5536-11D1-B726-00C04FB926AF}

  DCOM got error '1084' trying to start the ShellHWDetection service with arguments "" to start the server:
  {DD522ACC-F821-461A-A407-50B198B896DC}

  Unable to start a DCOM Server: {A0717E52-8AC8-4DD9-8682-0B76775125E6}. The error:
  '2' that happened at the start of this command: c:\windows\system32\divxsm.exe-integration

  The next (s) starting or starting system could not load:
  mfehidk
  SCDEmu
  spldr
  Tosrfcom
  Wanarpv6
  ---------------------------------------------

  * I have also being the .dmp file debugging registration errors and content: *.

  ------------------------------------------------

  1: kd >! analyze - v
  ************************************************** *****************************
  * *
  * Bugcheck analysis *.
  * *
  ************************************************** *****************************

  KERNEL_MODE_EXCEPTION_NOT_HANDLED_M (1000008e)
  It is a very common bugcheck. Usually the PIN address of exception
  the driver/function that caused the problem. Always note this address
  and the date of the picture link / driver that contains this address.
  Some common problems are the exception code 0 x 80000003. This means a hard
  coded breakpoint or assertion was hit, but this system has been started
  / /NODEBUG. It is not supposed to happen as developers should never have
  breakpoints coded hard in retail code, but...
  In this case, make sure a debugger must be connected and the
  system startup/DEBUG. This will we will see why this breakpoint is
  happening.
  Arguments:
  Arg1: c0000005, the unhandled exception code
  Arg2: 8eb51aa9, the address that the exception occurred at
  Arg3: 8b31b010, frame trap
  Arg4: 00000000

  Debugging information:
  ------------------

  EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - the instruction at 0 x % lx 08 referenced memory at 0 x % 08 lx. The memory could not be %s.

  FAULTING_IP:
  + 12A
  8eb51aa9 f6461c40 test byte ptr [esi + 1Ch], 40 h

  TRAP_FRAME: 8b31b010-(.trap 0xffffffff8b31b010)
  ErrCode = 00000000
  EAX = 00000000 ebx = 927 b 4470 ecx = 927 b 4470 edx = 003e0000 esi = 00000001 edi = 927 b 4504
  EIP = 8eb51aa9 esp = 8b31b084 ebp = 8b31b2b8 iopl = 0 nv up ei pl nz na po nc
  CS = 0008 ss = 0010 ds = 0023're = 0023 fs = 0030 gs = 0000 efl = 00010202
  8eb51aa9 f6461c40 test byte ptr [esi + 1Ch], 40 h ds:0023:0000001 d =?
  Reset the default scope

  CUSTOMER_CRASH_COUNT: 3

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  BUGCHECK_STR: 0X8E

  Nom_processus: Skype.exe

  CURRENT_IRQL: 0

  LAST_CONTROL_TRANSFER: from 90f18482 to 8eb51aa9

  STACK_TEXT:
  WARNING: Frame IP not in any known module. Sequence of images may be wrong.
  8b31b2b8 90f18482 00000000 00000000 927b 4470 0x8eb51aa9
  8b31b2e4 8224010 89bbe960 c a50c5b48 b 927, 4470 Mpfp + 0 x 7482
  8b31b328 8222b3e7 8222b 712 69798145 and 00000002 nt! IopfCompleteRequest + 0x11d
  8b31b550 90f5cfd7 89b4a3e8 84f341a8 00000010 nt! RtlWalkFrameChain + 0 x 58
  8b31b574 822c1fd3 adaf0d40 a50c5b48 a50c5b48 tdx! TdxTdiDispatchCreate + 0 x 213
  8b31b638 822c1fd3 89bbe960 a50c5b48 a50c5b48 nt! IofCallDriver + 0 x 63
  8b31b688 82426ce1 a 697985, 9 a8e5d364 89b4a3d0 nt! IofCallDriver + 0 x 63
  8b31b758 8244c3cf 89b4a3e8 00000000 a8e5d2c0 nt! IopParseDevice + 0xf61
  8b31b7e8 6 00000000 00000240 nt 8b31b840 824240c! ObpLookupObjectName + 0x5a8
  8b31b84c 82425bc3 8b31ba98 00000000 90e82400 nt! ObOpenObjectByName + 0x13c
  8b31b8c0 8242c51d 8b31bad8 8b31ba98 02000000 nt! IopCreateFile + 0x63b
  8b31b91c 90fcf5de 8b31bad8 8b31ba98 02000000 nt! IoCreateFileEx + 0x9d
  8b31bb60 90fcd1da b2e767f0 a5087508 00000016 afd! AfdTdiCreateAO + 0 x 565
  8b31bbe4 90fd5040 84f3893c 89bcc0f8 8b31bc0c afd! AfdBind + 0x2e3
  8b31bbf4 822c1fd3 89bcc0f8 84f38860 84f38860 afd! AfdDispatchDeviceControl + 0x3b
  8b31bc44 824525e5 84f37130 84f38860 84f3893c nt! IofCallDriver + 0 x 63
  8b31bc64 82452d8a 89bcc0f8 84f37130 03e7fb00 nt! IopSynchronousServiceTail + 0x1d9
  8b31bd00 8243ca5d 89bcc0f8 84f38860 00000000 nt! IopXxxControlFile + 0x6b7
  8b31bd34 8225da1a 00000464 000002e4 00000000 nt! NtDeviceIoControlFile + 0x2a
  8b31bd34 77069a 94 00000464 000002e4 00000000 nt! KiFastCallEntry + 0x12a
  00000000 00000000 00000000 00000000 0x77069a94 03e7fc30

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  Mpfp + 7482
  90f18482? ???

  SYMBOL_STACK_INDEX: 1

  SYMBOL_NAME: Mpfp + 7482

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: Mpfp

  Nom_image: Mpfp.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 48445e60

  FAILURE_BUCKET_ID: 0x8E_Mpfp + 7482

  BUCKET_ID: 0x8E_Mpfp + 7482

  Follow-up: MachineOwner
  *----------------------------------------------------------------------------------------------------------*

  Guys do you have an idea what could wrong? Or how world you this problem?

  Any ideas would be welcome. I'm starting to get very frustrated after 3 days in the problem... Thank you very much!

  * Niter *.

  Hello

  I agree with Luke. It of really impossible that this error would be caused by one of the tools updated Toshiba.

  I see in your post a few notifications on DivXsm.exe which is placed in the system32 folder and Skype.exe.

  In my opinion, there is a compatibility issue with 3rd party applications that are installed on your laptop.
  I have no idea why this has happened after the execution of some updates, but it seems that the system has been confusing upward.

  As suggested by Luke, you could start the recovery using the Toshiba HDD recovery option.

  Check it!

• Only safe mode

  Given that I downloaded last updates of security my ' puter, AMD Athlon II X 4 64 with 8 GB of memory running with Win7 64-bit, only to start in SafeMode with network. Because it means that I can not access Services and load the drivers he leads me to madness. I tried to diagnosis and repair, all without success. I have a file CBS indicating some files are missing, but I can't find where to get them.

  Any suggestions before I resort to the ritual immolation?

  PIP

  You can access the SafeMode normal mode by selecting Start, run, type msconfig and press the ENTER key. Click the Startup tab and check the box before the secure startup, click apply and then click OK and restart your computer.

  To return to the normal mode, you follow the same procedure except that you uncheck the box before the secure boot.

• Can't localhost in Firefox, even in Safe Mode, but it can get in private browsing

  IE has never had a problem, but in FF, I still have "the connection was reset. The connection to the server was reset while the page is loading. »

  This also includes doing 127.0.0.1

  The fact that I can not get in Mode safe, but can get when private browsing is strange, I think. That includes private browsing only Safe Mode, to see if this is the problem?

  PB mode does not use the disk cache and does not use the current set of cookies.

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

• System Restore works only in Mode without failure. Why?

  Using Windows 7 Home Premium and can do in only safe mode system restore. In normal mode, the Restore Points are generated without problem.

  Hi JRHoot,

  Thank you for reaching out to the Microsoft Community.

  According to the description, it seems that you are unable to run the restore of the system in normal mode.

  To guide you in the right direction, I need a little more information of the computer with the problem. Please help me answer the following questions:

  -You have an error message when running the system restore?

  I will certainly help you with this issue.

  Here are a few troubleshooting methods that you can try in order to solve the problem.

  Method 1: Test the issue of clean boot and check.

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Please note: After troubleshooting, be sure to start your computer in normal mode by following these steps.

  a. click on start toreduce this includes this image, type msconfig.exe in the Start Search box and press Enter.Collapse this includes this image

  If you are prompted for an administrator password or for confirmation, you must type the password or click continue.

  b. on the general tab, click the Normal startup option and then click OK.

  c. When you are prompted to restart the computer, click restart.

  Method 2:

  Check the status of the shadow copy Volume service. If it is, then try to restart the VSS service and check.

  (a) click Start, type services.msc in the start search.

  (b) find the instantaneous volume cliché service.

  (c) make a right click on the Volume Shadow Copy service (VSS) and select Properties. Check if it is started.

  (d) if it is stopped, select start or restart. Make sure that the service is started and set as Automatic.

  (e) click on apply and OK, if you make changes.

  (f) check the status of the issue.

  Method 3: T emporarily disable the security software and verify.

  If the system restore works fine after you turn off the anti-virus, you can contact the manufacturer of security software and check if you need to change the settings.

  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

   

  If the problem persists, or you have questions about Windows, do not hesitate to let us know. It is our pleasure to be of service.

• I get an Fatal Exception on start up error, and I can only run in safe mode on my dv6

  I get an Fatal Exception on start up error and I can only run in safe mode on my dv6, can someone please help?  I don't really want to reset to the factory settings I have to reinstall everything.  I tried to go back through the system restore, but it keeps telling me that there is no restore point?  I'm running Windows7 64 bit OS

  Thanks in advance.

  Hi Hazel,

  Start in Safe Mode, open windows control panel, open programs and features and uninstall Comodo Firewall (this will probably be listed as Comodo Internet Security depending on the version).

  Once completed, restart the laptop in Safe Mode .

  As before, open all programs, open accessories, right-click on command prompt and select "run as Administrator".  In the command prompt type the following commands and press enter after each one.

  Drivers CD                (Note that there is a space between cd and drivers)

  del cumon.sys           (Note that there is a space between the led and cumon.sys)

  output

  NOTE: If you get an error after entering del cumon.sys as the "specified path cannot be fouund", it's Ok.

  Restart the computer and see if Windows starts normally.

  Kind regards

  DP - K

• HP pavilion Dv6 laptop: does not start in normal mode, safe mode

  Hi all

  I have HP Pavilion DV6 laptop with windows 7 Home premium 64-bit OS. It was working fine up until two or three days.

  After that some software upgrades, it has stopped booting.   When I tried to start it in safe mode, it stops at disk.sys.

  I don't have win 7 OS CD or recovery CD.  So I downloaded the trail version of windows 7 SP1, I want to install this, but he is suspended the windows logo.  I Googled it has bitten, I loaded a linux kernel and access the hard disk.  I backed up all the files required by using this boot of linux.

  I don't know what to do now?  What is the problem with my system. When I ran the drive diagnostic. It was a failure. That means that I can't use this HARD drive?

  Any help is greatly appreciated.

  Concerning

  Stéphane

  Hi stephane,

  Well the error code certainly would indicate that the player began to fail, but just in case, you might try to wipe the entire hard drive first and then reinstalling the operating system as described below.

  Download and install Killdisk on the link below - (this application will write zeros to the entire disk).

  http://Software.LSoft.net/KillDiskSuiteFree-Setup.exe

  Download and install ImgBurn on the link below.

  http://download.CNET.com/ImgBurn/3000-2646_4-10847481.html

  Access the application of disc kill you have installed in all programs, open the main folder, then select Bootable Disk creators, then the BACK Bootable CD Creator that will burn the ISO on a blank CD bootable.

  During the following process do not worry about all warnings as your Windows 7 installation disk will reformat the HARD drive.

  Insert this CD into your PC which is unable to load the operating system properly. Close Notepad, and then start again to boot from the CD of Killdisk and follow the instructions on the screen to kill disk.

  A brief description of the process here is Killdisk.

  Use it to wipe the entire hard drive, Select (80 h) and press f10 (you will also need to type a confirmation and press enter) - ( This will make sure to include all of the partitions , and then start the process - this may take a few hours!).

  When the process is complete, remove the CD of Killdisk and try to reinstall Windows 7.

  If it still does not work, I think your only option is to replace the HARD drive.

  Kind regards

  DP - K

• WiFi only works in safe mode

  WiFi worked normally on my Mac Pro and then suddenly yesterday I received signal and an IP address but pages load. Other devices and computers work well with my wifi router. I can also surf the web very well when I boot in safe mode. However, when I restart my computer, then no wifi again. I can then go back into safe mode and get internet. I did no new software updates, installations or router configuration changes that may cause this problem from one day to the other. Anyone have any suggestions?

  Since then, I tried the following:

  -restart my router

  -renew the DHCP lease

  -flushed out DNS cache

  "- removed 4 files of./Library/preferences/SystemConfiguration/" then restarted computer

  -rebooted in safe mode

  -reset the SMC

  -turned off bluetooth

  -hidden "iTunes Helper" elements of opening under my user account. The only listed element.

  http://etrecheck.com/

• MPB starts only in the trunk in safe mode

  Retina MBP 2012 - mi 2012 • OSX - 10.11.6 (El Captain)

  I know that this is not a new issue, but I din't found a solution to internet research;

  This week, since when I have ' USB drawing too much power ", and then restarted my mpb - it can only start in safe mode. I did MSC and PRVM Reset but without success.

  Panic report *.

  panic (the appellant 2 0xffffff802e1ce6fa cpu): Kernel trap at 0xffffff7faf638b70, type 14 = page fault, registers:

  CR0: 0X000000008001003B, CR2: 0XFFFFFF813B80F274 CR3: 0X0000000031B18000 CR4: 0X00000000001626E0

  RAX: 0XFFFFFF813B80F26C, RBX: 0XFFFFFF7FAF5F4BC4 RCX: 0 X 0000000000000000, RDX: 0 X 0000000000000000

  RER: 0XFFFFFF81319F3C00, RBP: 0XFFFFFF81319F3E10, IHR: 0XFFFFFF813B80F26C, RDI: 0XFFFFFF8041E69900

  R8: 0X000000000000FFFF, R9: 0XFFFFFF813B80F26C, R10: 0 X 0000000000000000, R11: 0 X 0000000000000001

  A12: 0 X 0000000000000440, R13: 0XFFFFFF804240EA00, R14: 0XFFFFFF8041E69900 R15: 0 X 0000000000000000

  RFL: 0 X 0000000000010286, RIP: 0XFFFFFF7FAF638B70, CS: 0000000000000008, SS 0 X: 0 X 0000000000000000

  Lack of CR2: 0xffffff813b80f274, error code: 0 x 0000000000000000, CPU error: 0 x 2, PL: 0

  Backtrace (2 CPU), Frame: Return address

  0xffffff81319f3890: 0xffffff802e0dab52

  0xffffff81319f3910: 0xffffff802e1ce6fa

  0xffffff81319f3af0: 0xffffff802e1ec563

  0xffffff81319f3b10: 0xffffff7faf638b70

  0xffffff81319f3e10: 0xffffff7faeb21855

  0xffffff81319f3e70: 0xffffff802e6b6148

  0xffffff81319f3ee0: 0xffffff7faeb215b6

  0xffffff81319f3f00: 0xffffff802e10f2da

  0xffffff81319f3fb0: 0xffffff802e1c9117

  Extensions of core in backtrace:

  com.apple.iokit.IOUSBHostFamily (1.0.1) [79D250A3-843A-3750-BE64-A252CF17A148] @0 x ffffff7faeb19000-> 0xffffff7faeb82fff

  dependency: com.apple.driver.AppleUSBHostMergeProperties (1.0.1) [401B 7165 - 36E8 - 3EE5 - 849D - 71d AEB3E46E4]@0xffffff7faeb15000

  com.apple.driver.usb.AppleUSBXHCIPCI (1.0.1) [D08C7EEE-CA01-3053-8 D 47 - 2587BBCF9C9 5]@0xffffff7faf633000-> 0xffffff7faf652fff]

  dependency: com.apple.iokit.IOACPIFamily (1.4) [5D7574C3-8E90-3873-BAEB-D979FC215A7D] @0xfffff f7faf5e4000

  dependency: com.apple.iokit.IOPCIFamily (2.9) [F51AA3D6-EC2F-3AD3-A043-06DB79027AA2] @ 7fae97c000 0xffffff

  dependency: com.apple.iokit.IOUSBHostFamily (1.0.1) [79D250A3-843A-3750-BE64-A252CF17A148] @0 x ffffff7faeb19000

  dependency: com.apple.driver.usb.AppleUSBXHCI (1.0.1) [931A3E67-1954-320C-9619-C41C0A516804] @ 0xffffff7faf5ed000

  Corresponding to the current thread BSD process name: kernel_task

  If your Mac runs in Mode safe mode, but not otherwise, it is most likely, you have an installed extension that is the cause.

  Disable all extensions via system preferences. To isolate which extension is at fault, turn on an extension at the same time, restart in the meantime, until you find the bad Apple.