Qosmio F50 - BSOD after loggin into Windows and only safe mode works

Similar Questions

• HP 15-r203nv: model: 15-r203nv keyboard works in the bios and only safe mode.

  Hello there is a problem with this laptop, the work of keyboard in the bios and in safe mode and during my convalescence... but it does not work in normal mode. (F12 wifi light is white)

  Thank you very much

  model: 15-r203nv rev: 2213-120 products: L0E81EA #AB7

  Hello

  The fact that it does not work with a clean install starts to point to some kind of hardware problem, although it is strange that he will run in Mode without failure.

  Click with the right button on the taskbar, select Manager tasks, click the Startup tab - right click on each entry in turn and select Disable.  Once completed, restart the computer and see if there is no change.

  An update of the bios (F.39 Rev.A) is also available on the Product Page , which can be useful if you have not already done it - if you decide to apply, make sure you unplug all the devices (including the usb keyboard) before starting the update.

  Kind regards

  DP - K

• I get BSOD after Bios flash, can connect in safe mode.

  Hi all

  I use a laptop HP DV3145 DX, OS is win 7 Home Basic (it came with the laptop).

  A few days ago my screen started to behave erratically. The lower part of the screen is blurred and was unreadable. So I have updated Bios with the HP support assistant.

  After I flashed the bios, I could connect to windows, but every time I log on to the windows it crashed (BSOD) after 30 to 60 seconds.

  I could connect to the computer in safe mode

  That's what I did

  1. connected in safe mode and disabled all startup program (used Msconfig), with the exception of microsoft. This did not help.

  2 activated the player HP_tools disk management and I see the Bios, Bios_new file is there.

  Now, what should be my next step? I want to factory reset as my last option, I have a lot of settings, digital certificates, backups of phone in this machine, those who are important to my work.

  I think to Flash the Bios to the previous version to see if that helps. Now, I don't consider myself a very experienced user. So if anyone can tell me how to Flash the bios to the older version, I'll be grateful.

  I would also like to hear any other suggestions, others may have.

  * PS: I can't update windows drivers (I've updated about a month ago), because the 3 G dongle that I use is not having recognized in safe mode.

  Thanks in advance,

  Magassa

  You should not have flashed the BIOS. Updating the BIOS is not a magic solution to all the problems. You must perform as the first response to a problem with your laptop because it adds an element of risk.

  You should use the diagnoses instead. Press the power button and immediately press the ESC key. In the start menu, choose to press the F2 key to invoke diagnostics. Perform a system test, a test of memory, a hard drive test and a test video.  Let us know what are the results of the diagnostic test. The image is a more recent version that is installed on the hard drive of your laptop, but is still pretty similar.

  

• When we turn the or after mode 'sleep' my motherboard will load but then nothing else... White screen. If I reboot and select Safe mode it loads. If I reboot in safe mode then everything works. Windows loads, everything works.

  When I turn on my PC or after mode 'sleep' my motherboard will load but then nothing else... White screen.  If I reboot and select Safe mode it loads. If I reboot in safe mode then everything works. Windows loads, everything works.

  I have this pc for 3 years.  My system was full of unused and unwanted programs, so I rebooted to Vista, deletted all my old files that Vista had moved into the "old." This is when I started having this disorder.

  (I made this process more yet to see if it would help with no luck)

  My first thoughts were video driver... downloaded the new drivers 3 times.  scanned all the other drivers for updates ect. nothing seems to help...

  Anyone have any ideas?

  Thank you

  Dave

  I have

  I was able to download these files.  Rthl64.sys point - one component of your network cable in pictures device driver memory.  Interestingly, the dates of the 2006 pilot (Rtlh64.sys my Sep 26 07:20:23 2006 (45190CF7)), so it's most likely your problem.  Follow these steps:

  -Download a new copy of the software/drivers on the website of Realtek here: http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=7&PFid=10&Level=3&Conn=2

  -Uninstall the current software/drivers on your system

  -Install the newly downloaded drivers

  -Monitor for more BSOD

  Here is a summary of the BSOD:

  BSOD BUGCHECK SUMMARY

  By: 6002.18267.amd64fre.vistasp2_gdr.100608 - 0458
  The debugging session: 16:23:07.947 Sun 31 Oct 2010 (UTC - 05:00)
  System Uptime: 0 days 13:18:38.380
  WARNING: Unable to verify timestamp for Rtlh64.sys
  ERROR: Module load completed but symbols can be loaded for Rtlh64.sys
  Probably caused by: Rtlh64.sys
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0X9F
  Nom_processus: System
  Code 0000009F error checking
  Fffffa80 00000000 00000003' arguments'03de3a30 fffffa80 '05bf1050 fffffa80' 072dc010
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  By: 6002.18267.amd64fre.vistasp2_gdr.100608 - 0458
  The debugging session: 22:49:49.007 sat 30 Oct 2010 (UTC - 05:00)
  System Uptime: 0 days 5:12:31.440
  WARNING: Unable to verify timestamp for Rtlh64.sys
  ERROR: Module load completed but symbols can be loaded for Rtlh64.sys
  Probably caused by: Rtlh64.sys
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0X9F
  Nom_processus: System
  Code 0000009F error checking
  Fffffa80 00000000 00000003' arguments'03def060 fffffa80 '05bdf050 fffffa80' 04aeb2d0
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  By: 6001.18000.amd64fre.longhorn_rtm.080118 - 1840
  The debugging session: 21:48:58.144 Wed Oct 27 2010 (UTC - 05:00)
  System Uptime: 0 days 9:49:32.487
  WARNING: Unable to verify timestamp for Rtlh64.sys
  ERROR: Module load completed but symbols can be loaded for Rtlh64.sys
  Probably caused by: Rtlh64.sys
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0X9F
  Nom_processus: System
  Code 0000009F error checking
  Fffffa80 00000000 00000003' arguments'03a1ca30 fffffa80 '05-99050 fffffa80' 039c8c60
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``

  -John ( http://www.carrona.org/index.html )

• My Satellite Pro L Gets a BSOD after going into sleep

  My Satellite Pro L Gets a BSOD after going into sleep
  We spend whenever my laptop is asleep or in hibernation.
  When she comes back, it goes to BSOD.

  Can you help me please?

  What cell phone do you have exactly?
  What operating system do you use?

  Have you tried to reinstall the OS using the recovery CD?
  You update the OS?
  You update the BIOS?

• Start normal mode after windows xp bar charge it gives black screen and in safe mode it gives blue screen

  Victorinox original title: Black scree & blue screen...

  So my laptop that is running Windows xp, start in normal mode after windows xp bar charge it gives black screen and it stays like this, and in safe mode it gives blue screen, what can I do? I need your help atleast to save the files to my hard drive...

  Hello

  · What is the error code or error message that you receive when the computer starts in safe mode?

  · Were there any changes made on the computer before the show?

  · What is the number and the model of the computer?

  · Who is the service pack installed?

  Try the methods below:

  Method 1: Disconnect all the devices connected to the computer such as printers, scanners or USB hard drives and restart the computer and check if that helps.

  Method 2:

  Try to start your computer in last known good configuration. You can check the link for the procedure: how to start your computer by using last good known Windows XP Configuration: http://support.microsoft.com/kb/307852

  Method 3:

  You can follow the steps listed in the link: after the Windows Logo appears, or after you log on Windows, a Windows XP computer can display the wallpaper, a black screen or a blue screen: http://support.microsoft.com/kb/318027

• The purpose of doing a virus scan after Windows starts in safe mode?

  I've heard some suggestions that, in certain circumstances, it is best to do a virus scan after Windows starts in safe mode. So I have two questions:

  (1) would what type of circumstances you perform a scan antivirus in safe mode?

  (2) what are the advantages or disadvantages?

  I have found no reliable info that answers to these questions and would be grateful for any info, or even just a point in the right direction.

  Thank you!

  Hello

  The advantage is that some process and services are not loaded in Mode without failure there is less chance
  This malware can load and interfere with the process. The downside is the same if its best
  to run the malware checks mode safe and then in Windows. Or run in Windows and as appropriate
  difficult to remove malware is detected then run in Mode safe, then in Windows.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER THAT you are sure that the machine is clean of any malware.

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

• After that the Windows System Restore does not work

  So I tried at my peak of windows 7 on the eve, but he throws it gives me an error saying "can not find script file c\windows\run.vbs" system restore other than that it was just a black screen with my mouse on it. Any help would be appritiated, thank you.

  You are able to access safe mode?

  If your computer has a single operating system installed, press and hold the F8 key as your computer starts or restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  If you access the safe mode, you can follow the procedure described in the following link to undo the restore point:
  http://Windows.Microsoft.com/en-GB/Windows-Vista/undo-system-restore

• Can I upgrade my windows vista computer to windows 7 in safe mode?

  upgrade Windows in safe mode.

  I have windows vista and I want to upgrade to windows 7... I bought the software for windows 7... My question is can I put my windows vista to windows 7 in safe mode... If I do a normal connection, my computer freezes after a few minutes... also. update will solve the problem of my computer in normal mode of freezing

  Thank you

  Avinash vyas

  It is recommended to perform the upgrade in normal mode, any problem with your PC freeze. It is best to update your Windows and also run Windows 7 upgrade advisor:

  http://Windows.Microsoft.com/UpgradeAdvisor

  The problems and then start to upgrade to Windows 7, and before that close all applications you are running (if any).

• Cannot start windows Vista in safe mode.

  I followed these instructions to start Windows 7 in safe mode:

  I tried to start windows vista in safe mode by using the following:

  1. Click on the Windows icon in the left bottom of the screen while Windows is running in normal mode.
  2. Click on the arrow located to the right of the lock at the bottom of the popup menu symbol
  3. Choose "restart".
  4. I restart the computer, press the F8 key and hold.  I tried at the beginning of the sequence to reboot and after that the light appears on the mouse, but still before the windows logo appears.
  5. Restart the computer in normal mode.
  6. I tried the key down and also tried pressing the F8 key several times both giving the same results without success.
  7. To eliminate the possibility of a bad keyboard, I switched from keyboards with the same results.

  Can you tell me what I am doing wrong?

  You tap f8.

  You can have a F-Lock key in the upper right corner of your keyboard.

  http://www.bleepingcomputer.com/tutorials/tutorial61.html

  Read the other way at the link above.

  Table of contents > Vista.

  See you soon.

  Mick Murphy - Microsoft partner

• Qosmio F50-126 not supprted for Windows 7 upgrade?

  I get really angry with Toshiba and Windows 7 upgrade option.
  I'm really excited about the upgrade of my Qosmio F50 - 126 to Windows 7 from Vista Home Premium.
  But after doing a little research on issues related to the upgrade, I burst into anger.

  I went to this link [http://aps2.toshiba-tro.de/kb0/TSB9902P50000R01.htm] to check if my phone is supported, but because I paid a lot of money for it I have it MUST have.

  But guess what... IT IS NOT!

  In addition to this... It says on the website that the notbook not mentioned will get "limited support"!
  WHAT? my 1999 MACHINE VA GET LIMIT dollar taken in CHARGE for WINDOWS SEVEN!

  That I am, I guess to do... buy another Toshiba or sue to get the money and buy a new one?
  Does that mean I can't run windows 7 will be of all drivers runnin? WHAT SHOULD I DOOO DARN?

  Hi mate

  Guess what? I have an older A210 home
  I installed Win 7 on it and everything works fine!
  As you can see it the A210 is not listed as a supported series Win7, but it should be a serious reason does not install a Win7 on it?

  I didn t find official drivers on the driver Toshiba page but I could perceive my own hand, I used tools of free hardware diagnosis, which helped determine the installed devices
  I took the time to learn all the drivers, but it wasn't a big problem

  Thus, even your laptop is not listed in the page, you will be able to use Windows 7 and will be able to collect the necessary drivers

• Random BSOD after upgrade to Windows 7 for Win Vista

  Hello

  I am getting random BSOD, system crashes etc... After that I updated to windows vista.

  It is not a custom built PC, but I checked the inside of the box

  Plug-

  Intel Core2Duo

  4 GB of Ram

  1 TB HARD DRIVE

  NVIDIA Gt 140

  (Big one) memory dump

  http://1drv.Ms/1pIf5US

  OM

  All first please change your control panel of the system to small (lernel) DMP.  It will save you a ton of time when you transfer files DMP.  You can read how in this wiki

  This accident was related to the corruption of memory, please run the Driver Verifier to find the underlying cause.

  These accidents were related to the corruption of memory (probably caused by McAfee).

  Please run these tests to check your memory and find which driver is causing the problem.

  
  

  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

  
  

  Since then, it is more likely to be a pilot run everything first.

  1-Driver Verifier (for full instructions, see our wiki here)

  
  

  If the auditor does not have the issue we move to it.

  2-Memtest. (You can learn more about running memtest here)

  
  

  If you cannot start after you have enabled the auditor reboot in safe mode

  In Vista & win 7 (F8)

  When win 8 http://www.howtogeek.com/107511/how-to-boot-into-safe-mode-on-Windows-8-the-easy-way/

  
  

  Co-written by JMH3143

  .

• How to fix 7B BSODs after migration from Windows XP sp2

  Problem: Blue Screen Of Death (bsod) 7 b immediately after the migration wizard built the virtual machine.  Safe mode does not work and results in even.  Last step reported is mup.sys.

  What I want to do: go to the macbook pro and be able to run my old Windows apps (MSoffice, Quicken, with my office vpn, etc) on my migrated files.

  Host: macbook pro, max OS X 10.6.7, 2.3 GHz Intel i5, 4 GB 1333 Mhz DDR3

  Running VMware Fusion v 3.1.2 (332101)

  Comments:

  Value of the property

  ------------------------------------------------------------------------------------------

  Model KT333CF-8235

  AMD Athlon XP processor

  CPU Socket Socket

  Upgrade processor support ZIF

  System slots 4 PCI, 1 AGP

  Type of machine AT/AT COMPATIBLE

  Space disk C: 9 GB available, 39 GB Total, 9 GB for free

  Disk D: accessible 10 GB, in Total 19 GB, 10 GB for free

  Disk E: 18 accessible GB, GB 107 in Total, 18 GB free

  Disk F: the 16 GB available, altogether 48 GB, 16 GB free

  Drive T: 8011 MB available, 8056 MB in Total, 8011 MB free

  1024Mo of physical memory total, 144 MB free

  Memory load 85%

  1952 MB of virtual memory total, 1152 MB free

  SwapFile 1024 MB

  OS Windows XP_Home sp2

  Installed the VMware tools: version vmware-converter 7.0.1.6272

  ==================================================================================

  What I tried:

  Boot into the bios and check the settings:

  -My guest use IDE controllers to talk to 2 physical hd

  -having regard to the many KB articles on scsi drivers, but I don't seem to need any

  -the main drive has partitions C, D, E, F

  start of the repair console of sp2 cd-rom WinXP_Home

  -a ran chkdsk/p

  -a ran fixboot

  tried to repair the virtual disk using vmware-vdiskmanager

  each element runs great but continues to 7B bsod

  My copy of Windows XP_Home sp2 is a upgrade disk and I have the CD key

  the original version full.

  Attached:

  .vmx showing current config

  screenshots of bsod

  Hello

  Welcome to the VMware community forums.

  Looks like you have already tried a few things!

  You're right, normally a 7 b error is related to not having the correct scsi drivers installed, but that your virtual machine using IDE disks, is not what causing errors.

  I did a quick search on google and you should be able to disable the mup.sys (multi unc provider) that is used for novell networks using the windows recovery console, the problem is more likely to be due to a corruption of the windows registry.

  It's probably better/easier to run windows repair installation of windows.

  I guess you have your original windows machine always there in case that you need to return one step? If this isn't the case, so always make a backup before proceeding with the steps like these. Of course, you can also use the capture feature instant molten, but is never the replacement for a real backup.

  --

  Wil

• Satellite L300D BSOD after upgrade to Windows 7

  I got this laptop (Satellite L300D) for a little more than a year with windows vista (32-bit) running and there were no problems. However, I've recently upgraded to Windows 7 (x 64) and became the problems since the first reboot.

  On the first reboot after installing windows 7, the computer off just after the "Starting Windows" screen Turn on again took me to the repair of the system where he performed a system restore and I was able to start successfully even once. I thought that the problem had something to do with the automatic updates, so I disabled the and tried to restart to see if the problem has been corrected. This time, after the "Starting Windows" screen I got a BSOD of unrecoverable system error. After several attempts to reboot and multiple attempts to repair system (which usually says she didn't) it started correctly again.

  This problem has been going for about 3 weeks now and it is quite irritating. The results of the system of compensation for claims that a "Boot critical file is corrupt", but it starts eventually after several attempts to start. He also has a habit of turning at random during the race (it happens about once or twice a day). So from now on, whenever I chaque fois que je tente tries to start my computer it shuts down after the start screen or give the BSOD and restarts and the only way to make it work seems to be to keep trying to start and hope for a successful boot of the system upward (this happens finally after a few failed attempts).

  I did some research on this and came to [this | 1251 http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?modelFilter=L300D-ST3501&rpn=PSLC8U&category=&selCategory=3&moid=222 & os = & ct = DL & selFamily = 1073768663] page. I think that's exactly what my problem is (need to update the BIOS), but if I understand correctly installing windows to do this only for 2000/xp/vista and I am unable to use the second option to boot from the disc as I get the BSOD before he gets to that point. I should try the windows install option although I am running windows 7 or is there another way to update the BIOS? Or I'm off completely and the problem is with something else?

  I wasn't sure what information I would like to add to this post so if need more information please let me know.

  Thanks in advance

  Edit: Oops, just realized the page I linked is not link to exactly what I had opened. I do not speak of 'critical BIOS updates for Windows 7 64-bit' under 'support form '.

  Post edited by: Jacob27

  Hello

  First of all, it would be interesting to know what code BSOD, you get exactly. Can you post this information useful? Normally, on the Microsoft Knowledge Base, you can find additional information about most of the BSOD codes and so you can start to solve this problem.

  BSODS are often associated with drivers or RAM/HDD. The latter, you can check with special diagnostic tools, Memtest86 for RAM and Drive Fitness Test for the HARD drive. These two tools are free and you can find it using Google. You can download an iso image of them to create a bootable media where you can start the test.

  Regarding your update to the BIOS: I put t know what L300D you have exactly, but according to the Toshiba site it shows an update of the BIOS also for Windows 7 64-bit. You can try to install it.

• problem with magic network after the recent windows and mcafee updates

  There seems to be a conflict with of cicso latest windows and mcafee updates Network Magic platform. Hard to say which is originally the closing down due to the fact they both tend to update together or to the one right after the other. Could someone look into this?

  Hello

  Thanks for posting this question in the Microsoft Community.

  I'll certainly try and help you get the problem solved.

  I suggest you to check that the windows update history to verify that Windows update may cause the problem.

  (a) click on the "Start" button and select "Control Panel" from the menu that appears.

  (b) double click on "Add or Remove Programs".

  (c) click the checkbox next to 'Show the update' at the top of the window.

  (d) locate the "Windows XP - software updates" header. Below, you will find a list of updates all the date where they have been installed and the installation of the window.

  Provide us update KB number that may cause the closing.

  You can also use the shutdown Event Tracker to stop suddenly.

  Hope this helps and let us know if you need more assistance. We will be happy to help you.