HP DV6 6099EL: SCREEN WHITE AFTER BIOS UPDATE

Similar Questions

• Satellite L450D - 13 X - blue screen after BIOS update

  I have the blue screen after BIOS update. Satellite L450D - 13 X worked ok before that ideas?

  Is there contact information for Support TOSHIBA?

  Hey,.

  > Is there any TOSHIBA support contact information?
  No, becaue, must contact an authorized service provider. Guys can help on any hardware and software problems and can also order spare parts from Toshiba.

  Here is a list of aspic, where you can look closer:
  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT

  Good luck! :)
  ?

• Unknown device on the Satellite A100-153, after BIOS update to 5.1

  ACPI\TOS1901 * TOS1901<--- this="" is="" the="" unknown="" device="" after="" bios="" update="" to="" 5.10="" on="" my="" satellite="" a100-153="">

  Vista now shows it in as unknown device manager; the TOS1900 showed up too, but after installation of Toshiba Value Pack for Vista, it went.

  Help, please. WHICH IS: ACPI\TOS1901 * TOS1901

  Hello

  ACPI-> Advanced Configuration and Power Interface
  ACPI defines hardware and software interfaces that allow focus on the OS configuration and power management to enumerate and configure motherboard devices.
  For example: ACPI is necessary for the standby and hibernation mode.

  Now your question; the new BIOS has been updated and configured to using VISTA.
  It seems that VISTA was not compatible with the previous version of BIOS because the ACPI interface. Now you can install Vista on the laptop, but it seems that you need a driver. Possibly new chipset driver version might help. But as you probably know, the drivers are not available at this time. Unfortunately

• want to m6 sleekbook: screen flashing after windows update

  After the update windows 8.1 and later to win 10 screen flashes all the time between desktop screen and blue, already install all updates of HP with the intell and Windows safe mode - the same situation, all reinstalled video drivers by myself, but still no result,

  is it possible to solve this problem without getting windows to the previous version? or reinstall the entire system is the only solution?

  Hi @nazik_UA ,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question on your HP ENVY m6 Sleekbook and issues with a screen flashing after an update.

  Here is a link to put the laptop in Safe Mode. This occurs in safe mode?

  You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows 10.  Please restart the laptop twice to make sure that all updates are completed!

  Here is a document that shows how update the drivers that do not work correctly with Windows 10.

  If this did not help, you need to reinstall the operating system.

  I hope this helps.

  Thank you.

• Satellite C855 - white screen after BIOS update

  Hello

  I am a beginner user,
  I have Satellite C855
  Yesterday, I downloaded a 'update BIOS"that was sent to my computer.
  Since that my screen is blank, there is a hum in the background.

  I have a recovery back up on my external hard drive, but of course, the screen is blank so I don't know how the product.

  I think I must have downloaded a model or the update was not compatible.

  Hello

  White screen do you mean that nothing appears on the screen?
  You see the start screen of Toshiba, or if you are able to access the BIOS?

  Where this is not possible, try this:
  Disconnect the power adapter, remove the battery.
  Press and hold the power button for about 30 seconds.
  Then connect the two parts (batteries and AC adapter) for the laptop and try to turn on the unit.

  In case this would not solve the problem of the laptop, I'm scared of m the BIOS update was not completed successfully and I think that only authorized Toshiba service provider would be able to help you.

• Satellite C660D white screen after BIOS update

  I ran the update of the BIOS on laptop Satellite C660D PSC1YE recommended and he appeared to succeed, but when it restarts the screen won't turn on. I tried a few things to fix, but nothing worked.

  Tried:

  • connect an external monitor via VGA - white too
  • remove the battery of the CMOS button
  • removing a hard drive startup, to replace again
  • a short-circuit the J1 jumper under RAM slots

  What else can I try?

  Here is the windows bios update program:
  http://Support1.toshiba-tro.de/Tedd-...0601184846.zip

  Try to start with the battery.

• Satellite C650 - black screen after BIOS update

  My Satellite C650 Windows 7 - won't start afte BIOS update / switch.

  Everything worked very well until the automatic update of Toshiba asked me to download and install the new BIOS update, I did. At the same session Windows and McAfee asked updated. I agreed to all. After all updates have been installed, turns off. The next day when I walk, I see only black screen. I also tried F2, F12 and drive recovery. Nothing happens!

  Any recommendation?

  Hey,.

  It seems that something was wrong during the update of the BIOS and so that you can t the computer unbootable. But I put t understand why you did the BIOS update. If everything works correctly, you can forget about this update. More if you do a BIOS update you shouldn't t run any other updates or programs that might affect the update of the BIOS.

  Anyway, in this case you can do nothing and you need professional help. Please contact an authorized service provider and guys can help you update the ROM module On the Web from Toshiba site, you can find a list of all the FSA:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good luck! :)

• Re: Satellite - blue screen after BIOS update

  Hello

  My computer laptop girls worked very well until I did the BIOS update this morning. Now, I get the blue screen of death STOP: 0X0000007F. Help, please

  concerning

  Carol

  Hey, Carol, welcome to the forum! :)

  Don t misunderstand me, but may I ask why you n t post more information about your problem?
  Important to know is that your laptop you have exactly and where to download the updated BIOS and for what model. This is important information.

  By the way: have you ever tried to load the default settings in the BIOS after update?

• Re: Satellite L40 - black screen after BIOS update

  Hello world

  I have exactly the same problem, as shown here:

  http://forums.computers.Toshiba-euro...ThreadId=35156

  My laptop is a Satellite L40 - 150 (model PSL48E) it came with Vista and BIOS version 1.60

  I updated the BIOS to version 5.50, because I wanted to install Windows XP. The BIOS update process went well and the computer restarted automatically. After the reboot, I entered the BIOS (by pressing the F2 key). I pressed F9 to load the default settings and you exit the BIOS, saving the changes.

  Restarting the laptop and the screen is now completely empty. Nothing appears in it.

  I tried to remove and then reinsert the RAM modules, but it did not help.

  So, I guess the only option is to return the laptop to a service center?

  Why Toshiba do that? They are this deliberately or what?

  Kind regards.

  Hello

  I put t agree with Leolo and put I t too agree with you.
  The point is that there are tow updated BIOS for the L40.
  One for Win XP and one for Win Vista;
  But the two BONES work on with the two BIOS but some functions such as the FN buttons wouldn't work if you n t use good BIOS for the good OS.

  The BIOS on the Toshiba page is not defective. But of course, it is always possible that something will go wrong during the BIOS update procedure because the BISO update is always risky!

  One of my friends has updated the BIOS on this laptop and everything went well!

• Satellite A200-1fj - black screen after BIOS update

  Hello guys,.

  I'm planing to update my bios for this version

  http://support.toshiba-tro.de/tools/EULA/calleula.asp?ID=63108

  and my pc got little froze and lag then I close the program that has Flash my bios and restart my turn then black screen... I search and found this thread talking about the BIOS recovery and there seemed not workin for me (I use my 8 GB flash memory) and just do Fn + B when I press the power button to start and then the power led becomes orange... and nothing happens...

  Everyone please provide me the bios file just for this model and give me a clear instruction to Flash my bios with my flash (8 GB) memory

  W8 your replay guys, thx

  + The message was edited: link removed - unauthorized 3rd party Forum +.

  If the BIOS update was not properly flashed, the ROM should generally be flashed with a disc of crisis of the BIOS.
  This can be done by authorized Toshiba available in your country.
  Then get in touch with the ASP to solve this problem.

• Satellite C660D - screen is black after BIOS update

  Hello!

  I need your help to solve the problem that I have...

  I have Satellite C660D - 1 3, I was upgrading bios up-to-date and poster ON but black screen, ventolidor work and open and close leitor dvd...

  no idea what problem? And how to solve?

  I'm waiting for.

  Thank you.

  André Pedro.

  I'm afraid that the BIOS is doomed and the BIOS update was not successfully. It is not easy to fix.
  On this forum I found similar thread, then you can read and perhaps solve the problem.
  Check it out.

  https://Forum.Toshiba.EU/showthread.php?54395&TSTART=0

• Black screen on the Satellite A100-712, after Bios Update

  I bought a new Satellite A100-712 and I did a bios upgrade, everything was fine in windows and restart the laptop got it is pasted on the toshiba black screen that appears when you turn on the lapto.

  Any suggestions please, I would be very grateful

  It doesn't sound good. I did the BIOS update on two laptops A100 and everything was OK. Sorry, but I think that you will not be able to do anything alone. I recommend you contact the service authorized in your country as soon as possible.

• Pavilion 15-ab137ca: stuck on the management of the BIOS screen after BIOS update

  A ran a BIOS update that was a solution on this forum to prevent the Startup Menu to appear whenever I start the machine. Said that he would change from F16 to F10. Now, he has been slain on the screen of the BIOS for 30 minutes management. The display shows, the system BIOS is updated. This update will take a few minutes to complete. Do not close or remove the external power supply to your computer during the process. Check the new BIOS image. Block 2048/2048. Progress at 100%. How long should I wait?

  Hey!

  I am pleased that you are in your laptop.

  What is the screen below as you talk?

  

  All HP and Compaq computers that were manufactured with 10 Windows can use Secure Boot. Secure startup is enabled by default on these computers.

  If the image above is actually what you are talking about, please take a look at the documentation for Secure Boot . You will see a section called disabling Secure Boot... This should help you with the start menu.

  I hope this helps!

  Please let me know!

  Have a great day!

• Yoga 2 Pro Black Screen after Bios Update

  Only, I have formatted my yoga 2 pro, downloaded the drivers and ran the update of the Bios. I followed the instructions on playing ran me the .exe, one click on next/ok until you restart the laptop and if I'm not mistaken a menu red with a progress bar appeared. At this time, I left and when I came back a few minutes later, the laptop is on, the lighting of the screen was on but the screen was black, the backlight of the keyboard was also turned on and everything else was off. Lights on/near the switch indicating if there turned on and connected to the AC are off.

  It was like that for more than 30 minutes now, no sign of progress. This happened to someone else before? I'm not very keen on must turn off or unplug the laptop while flashing the BIOS, but at this point there is not much else I can do.

  I found the answer to my problem to

  http://forums.Lenovo.com/T5/idea-Windows-based-tablets-and/yoga-2-BIOS-update-crash/m-p/1322487/high...

  Now that I found this post, I remember the instructions telling me to turn it off manually when I've updated the bios earlier this year. However, these instructions don't mention about it, maybe they should be updated?

• Pavilion dv6-7029wm, do not boot after BIOS update

  Hello

  Here are the details of my laptop and the problem.

  Product name: Pavilion dv6-7029wm

  OS: Windows 7

  Error: Fail to start. Caps Lock flashing in 1-1/2 dry once continuous, red wifi light on. Power light and the battery light on, no flicker.

  Pre-grant changes: updated to the latest BIOS updates as well as 3 other updates; security etc.

  I've tried remove the battery, unplug adapter, start-up. It still does not work.

  Its only for 5 months I've had this laptop. Please help me.

  Hello again Sowmya_Harsha.

  Unfortunately there is nothing more I can do.  However, I've increased your case.  You should be contacted by a specialist soon.  They normally have with customers using the feature of private message on the forums.  If you don't know how to use the private message function, take a look at this thread. I wish you a great weekend!