"hp dvd a ds8a5lh ' does not properly

Similar Questions

• DVD/CD driver does not properly, the discs are not read.

  I tried different discs and none are read which is very annoying, because I can not install my new printer! When I checked the driver, the following message is displayed:

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  I click for solutions and he's looking for a few seconds and then nothing happens. I tried it 3 days ago and still today, but it still does not work, can I do?

  Thanks in advance for any help

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.

  Normally the above will solve this problem otherwise working your way down through them, even if you did
  them before.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Help! DVD/CD drive does not!

  Help! I used the Microsoft Fix It, I went through community forums and followed the links here and there, I even followed of it: http://support.microsoft.com/default.aspx/kb/929461 that requires you to modify your registry! YET, without success!

  Yesterday, the Windows Vista update ran, everything was hunky dory and a-okay (or so I thought). After that I turned off the computer, ran some errands, the CD-ROM/DVD-rom drive does not work! When I try to run a program installed which requires a disc (like a video game) I get the message "unable to locate the CD-ROM: Please insert the right CD-ROM, select OK and restart the program" even if the disk is in the computer. When I try to insert media, AutoPlay will not... Well... running! I went to the COMPUTER file and found 2 things; underneith the tip where it know "Devices with removable storage" I found a D:\ RW Drive who said that the device was not found, and to the right a menu similer who told me to "Insert a disc" when I clicked on D:\ RW.

  I looked in the DEVICE MANAGER to take a peek at my drivers and find my CD-ROM/DVD-ROM driver and he told me that the unit was working properly - HOWEVER, when I run Microsoft Fix It he told me something different. He told me my filters of class are corrupt, filter of device drivers are corrupt, device is not working properly, drive is disabled, drive is not assigned a drive letter. Now it's all hunky dory but I don't speak computer, and I would like to DISABLE ONE and non-CORRUPT everything!

  I have already done a system restore and follow the link that requires you to enter in your registry and remove the filters. It's a gateway computer, I already spoke with gateway and they told me to do a factory restore (which I have not yet done because I would like to know if there is a way to fix this problem without uninstalling EVERYTHING on my computer).

  I really hope that this is not a lost cause. Help me to Microsoft, you're my only hope.

  Try this step for your DVD player problem:

  Delete the UpperFilters registry entry:

  Click Start, in the search box, type regedit, and then press ENTER.  Start the registry editor.

  1. in the registry editor, expand my computer, and then expand HKEY_LOCAL_MACHINE.

  2. expand SYSTEM, and then expand CurrentControlSet.

  3. expand Control and class.

  4. under class, click {4D36E965-E325-11CE-BFC1-08002BE10318}.

  5. in the right pane (topic area), click UpperFilters.

  Entry UpperFilters.bak registry-year note may also appear.  To remove the UpperFilters registry entry, you must click UpperFilters and not UpperFilters.bak.

  6. on the Edit menu, click on delete.

  7. When you receive the following message appears, click Yes to confirm the deletion of the UpperFilters registry entry:
  Are you sure you want to delete this value?

  The UpperFilters registry entry is removed from the {4D36E965-E325-11CE-BFC1-08002BE10318} registry subkey.

  Note do not exit the registry editor. You must have this program for the next step.

  Delete the LowerFilters registry entry

  1. in the registry editor, expand my computer, and then expand HKEY_LOCAL_MACHINE.

  2. expand SYSTEM, and then expand CurrentControlSet.

  3. expand Control and class.

  4. under class, click {4D36E965-E325-11CE-BFC1-08002BE10318}.

  5. in the right pane (topic area), click LowerFilters.

  A note LowerFilters.bak registry entry may also appear. To delete the LowerFilters registry entry, you must click LowerFilters and not LowerFilters.bak.

  6. on the Edit menu, click on delete.

  7. When you receive the following message appears, click Yes to confirm the deletion of the LowerFilters registry entry:
  Are you sure you want to delete this value?

  The LowerFilters registry entry is removed from the {4D36E965-E325-11CE-BFC1-08002BE10318} registry subkey.

  8. exit the registry editor.

  Once you have you removed the damaged registry, you will need to reinstall the driver by following the instructions below.

  To reload the drivers for the CD-ROM/DVD-ROM/CD-R/W:

  1. Please right-click on computer and choose Properties.

  2. click on Device Manager on the left side of the window.

  3. click on the + sign next to CD/DVD PLAYERS

  4. the + sign will become a sign - and you can have a list of several drivers drop-down below. If so, each driver must be removed at once.

  To remove a driver simply hover the mouse over the driver, right click the mouse once and choose "Uninstall".

  5. continue to remove those drivers until it is no longer a topic for the CD/DVD PLAYERS.

  6. search for IDE/ATA/ATAPI controllers and repeat the same steps to delete all of them as you did for CD/DVD players.

  Note: When asked to restart, not until all are uninstalled

  7. the title of IDE/ATA/ATAPI Controller will not disappear and all controllers may not disappear after being uninstalled

  8. click on the X in the upper right corner of the window MANAGER of DEVICES.

  9 restart the system and let windows reload the correct drivers.

  10. check if the problem is solve.

• Matshita DVD-RAM UJ880AS does not

  Matshita DVD-RAM UJ880AS works not properly, will read the DVD etc, but does not burn. Ran Microsoft solve this problem, has not solved the problem.

  Hi Hopkins3329,

  I dare say that the drive had a lot of work on the burning aspect of it, and laser could have in that there is a laser to read and burn...

  Concerning

  GT4U

• Safari Web Clip does not properly

  Hello everyone

  I have a problem with safari Web Clip and that is does not properly for almost all pages, as example, I participate in a contest of therapy dbrand/unbox, and I really don't want to open the web page, whenever a new winner is announced, so I created a web clip, but it does not work well When I click the web clip icon he asked the location of the clip and when click on done, the web clip is from a different region and I can't fix.

  

  

  Is this some sort of bug or can I fix it myself?

  Web Clip still didn't work if the cut element remains in the exact same on exactly the same site. This is apparently not the case here.

  Dashboard widgets in general, are an old technology that has not been updated in many years.

• P50-A-144 satellite: the CD-ROM/DVD-ROM drive does not

  Version of Windows 10 Home 1607 (Build 14393.187)

  Hello

  After Windows Update Version 1511 1607, the CD-ROM/DVD-ROM drive does not work.
  The D: drive does not appear in Windows Explorer,
  CD-Audios and videos / DVDs do not work.

  In the Device Manager, the following legacy status error message appear:
  "Windows cannot start this hardware device because its configuration information.
  (in the registry) is incomplete or damaged. (Code 19). »

  Could you tell me how to solve this problem?
  Thank you.

  The solution was to uninstall the program "Toshiba Recovery Media Creator' and system settings/Programm features.
  I still don't understand why, but the fact is that after uninstalling the CD-ROM/DVD-ROM start normal work.

  More information here:
  http://www.borncity.com/blog/2007/08...-verschwunden/

• Satellite A200: DVD/CD player does not work

  Excuse me
  I bought toshiba A200.
  After two weeks my DVD/CD drive does not work.
  So I deleted the a±ts driver and then I do not want to install the driver.
  Please help about this.

  Hello

  Don't be angry with me, but your ad is not a little clearer!

  However, the CD/DVD drive uses and supports the common drivers Windows Vista (or XP)!
  You n t need any special drivers to recognize the STRANGE

  In your case I would recommend going to the Device Manager and remove (uninstall) the CD/DVD drive.
  After this procedure, restart the laptop.
  The Vista operating system should recognize the new device and must be reinstalled the drivers automatically

• Toshiba 47L7453DG - CEC does not properly using exernal amplifier

  I bought Toshiba 47L 7453 a few days ago.

  It is connected to the amplifier Onkyo TX-NR535 but CEC does not properly. Volume control works fine but On / Off or stanby does not at all.

  My previous TV Toshiba 42XV635DG was communicated by the CEC with the Onkyo even without any problem.

  The wire connection is HDMI 1.4 certified.
  Maybe the problem is with the firmware of the TV.

  Maybe someone had the same problem.

  Any suggestion?

  Thank you

  Hello

  From my point of few TV and amplifier are connected some CEC (Volume control) functions that work. I think you should check the auto power settings and HDMI CEC standby control system.

  Manual, you will find some important notes:
  http://www.Toshiba-OM.NET/LCD/PDF/English/L7453-424755-English.PDF

  _Page: 11_
  + You can control the basic functions of audio/video devices connected with s TV remote if you connect an HDMI-CEC compatible AV amplifier or playback device. +
  + If several devices are connected, the HDMI CEC control function may not work correctly. +

  _Page: 86 - 87_
  + When the point to activate the HDMI CEC control in the menu of HDMI CEC control configuration is defined on.
  + On, also allocated to individual features will be activated. +
  + When the connected equipment work, HDMI CEC control automatically detects the TV input selection. If the TV is in standby mode, it will be automatically reactivated. +
  + If the TV is off (standby), television will send a message turns off (standby) all devices HDMI CEC control connected to the TV. +

• EQUIUM A60: graphic ATI does not properly

  I HAVE AN EQUIUM A60 1 YEAR MESSAGE SUDDENLY CRASH SAID: ATI GRAPHICS CARD DOES NOT PROPERLY.
  CAN'T FIND THE DRIVERS UPDATED ON ATI OR MICROSOFT HELP PLEASE?

  Hello

  Can you tell me when this message appears?
  First of all, you can try to update the graphics driver from Toshiba. It is a first step that you can try.
  Check this page for the driver download.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Good bye

• CD/DVD-Rom drive does not not on Equium A100

  I installed a webcam, and it made my DVD - rom drive does not not with all drives. I uninstalled everything to do with the webcam and it still does not work. Can someone help me solve this problem without using the recovery disk of the product came with my laptop?

  I had this problem before, but I didn't the first time, it's the webcam that has caused the problem. It s webcam trust wb - 1400T. I had to use the product recovery disc and he had a lot of hassle to install all my programs again and this time I'm in the middle of exams and can't get it all done in time for my exams, as I have vital work on here I have to do.

  .. .Please help me... I think it is the driver, but I don't know how to fix it.

  Hi mate

  > I installed a webcam, and it made my DVD - rom drive does not not with all drives
  To be honest I have never seen that the webcam may have a negative influence on the internal CD/DVD drive.
  I see really no connection between the webcam and ODD... very strange
  Do you get any error messages?

  Anyway, in my opinion, you should try these solution ideas;

  (1) remove the drive from the Device Manager CD/DVD and restart the laptop. After restarting again the operating system should recognize the STRANGE and should re-install the drivers.

  2) access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  .. then restart the laptop.

  (3) download and install the tool freeware "CCleaner". This tool repairs registry and solves several problems in System.

  If this does not work, then the new installation of the OS would be wise to check if the problem could be related to a software problem.

  Best regards

• Satellite Pro L300: DVD drive eject does not & recognizes not all disks

  Satellite Pro L300 dvd player eject does not and does not recognize the disc that sits in.

  Please help someone,

  Thank you very much.

  What kind of help do you expect?

  You mean he s a software problem?

  I doubt it because it sounds like a mechanical hardware problem and in this case, the disk must be replaced.

  The laptop seems to be is not very old, and I think that the guarantee must be valid
  How about you, communicating with ASP in your country and ask for a replacement WEIRD?

  I think this helps

• Satellite A60 DVD - RW drive does not

  Hi guys,.
  The DVD - RW drive does not read anything I put in it.
  He works certainly (in some form) because it runs on start and when I put a disc inside, but he can't always SEE.

  I tried to uninstall/reinstall the drive itself, uninstalling/reinstalling the driver. I searched on the net for drivers (thinking that the driver file was corrupted), but I couldn't find a driver for the DVD-RAM.

  I was restarted after each task but still no luck.

  Help, please

  Thank you
  Dave

  Looks like a dead drive. I think it should replace the disk.
  Try to contact the ASP in your country, and it will get you more details.

• Error message: Shockwave, Flash Player does not properly during playback Slotomania

  Original title: shockwave flash player

  Hi I have problems with some games. Especially slotomania. When I enter the RM of slotomania that flashing message saying that Flash shockwave Player does not properly can give to interrupt or stop options taken but its gone too fast for me to do something. Then the really slow game. Can you help me?

  Hello Marilyn,.

  Thanks for posting your query in the Microsoft Community Forum.

  According the information, you are facing problems to play games online as Slotomania due to the Adobe Shockwave, Flash Player error messages.

  It would be useful that you can answer these questions to help you further.

  1. are you facing problems that when you play online game Slotomania?

  2. using Internet Explorer or another web browser?

  3. what version of the Windows operating system is installed on your computer?

  4. have you made a recent software or hardware changes to the system?

  If you use Internet Explorer, you can see the article and check if it helps to solve the problem.

  The problems of games online using Internet Explorer

  It will be useful.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• fan does not properly

  Does not properly on the laptop

  Sometimes it is just dust, animal hair etc. blocking the fan. Take a can of compressed air and blow all the ports/vents/opening very carefully to see if any change.

• Setup.exe does not properly

  I'm trying to upgrade to Windows 7, and at one point in the configuration of several programs are listed to be uninstalled, when it gets to the Realtek USB 2.0 card reader a pop window that says setup.exe does not properly.  Cannot uninstall in Control Panel either. Also tried disabling antivirus and firewall as a suggested site. Is there a way around this kind of Setup Windows 7 allows you to work around this problem

  Repeat: You need upgrades to Windows 7 not Windows updates.
  http://social.answers.Microsoft.com/forums/en-us/w7install/threads

  Please post on the forum for Windows 7 update/install. TaurArian [MVP] 2005-2010 - Update Services