HP Elitebook 840 G1: HP Elitebook 840 G1

Similar Questions

• EliteBook 840 G3: Two monitors and laptop screen problem external EliteBook 840 G3 and 2013 UltraSlim Dock (D9Y19AV #ABB

  Hello

  New EliteBook 840 G3 with discrete graphics and 2013 UltraSlim Dock using windows 10.

  I use 2 HP Z23n screen, there are connected with DisplayPort on Dock UltraSlim 2013 2.

  I have 1 questions with this

  (1) my 2 external displays connected to the 2 DisplayPort, started flashing then goes blank and returned once again without flickering. Very annoying. Seems that the graphics card a little reset on screen or the other from time to time. Tried to look at the logs without a bit of luck.

  Any ideas?

  2.30 firware link

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_165723_1 & lang = to & cc = us & hprpt_id = HPGL_ALERTS_1906111 & jumpid = em_alerts_us-us_May16_xbu_all_all_693375_1906111_DesktopsWorkstationsLaptopsandHybrids_recommended__.

• EliteBook 840 G2: USB3.0 driver for Elitebook 840 G2

  Hello

  I use Elitebook 840 cell G2 and Setup driver USB3.0 (file: SP69862). However, the software poped error message (the Installer failed to install one or more device drivers) at the end of the installation. You can reference attach the file Setup log in link here.

  Please help me solve this problem. Thank you!

  Hello:

  See if the driver directly from Intel works...

  Download, unzip and run the setup.exe file.

  https://Downloadcenter.Intel.com/download/22824/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-8-9-100-series-and-C220-C610-chipset-family

• HP EliteBook 840 G3: Why BIOS version 01.07 (sp76235) is pulled? (G3 EliteBook 840)

  Anyone know why the BIOS version 01.07 (sp76235) for EliteBook 840 G3 is taken?

  Link to the BIOS:
  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_167436_1 & swEnvOid = 4054

  The date is 1 January 3000 so he has obvisoly something wrong and HP do not want to install, I have deployed it to a large number of machines and would like to know what kind of questions, it is hoped.

  A new version 01.10 came out with these fixes:

  -Fixes a problem that causes the display to become visually distorted (flicker).
  -Fixes an issue where a system running Windows 7 with active hard drive encryption is unable to power (boot) after the BIOS is updated.
  -Prevents the BIOS downgraded below the 1.09 version.
  
  NOTE: After loading the BIOS version, older versions of BIOS may not be installed.

• EliteBook 840 G3: Driver for HP Elitebook 840 G3 to ACPI\HPQ6007 on Windows 7

  I'm looking for a driver for the unknown device "ACPI\HPQ6007" on the HP EliteBook 840 G3 for WIndows 7 64-bit OS. And I don't know which driver is the following.

  Any help will be appreciated.

  Thanks in advance.

  Hello:

  Try the link to the support page for your laptop... click on the download button blue on the right side of the page.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_169887_1

• HP elitebook 840 g3: need driver Win PE for hp elitebook 840 g3

  Hello

  I need driver Win PE for hp elitebook 840 g3.

  I download ftp://ftp.hp.com/pub/softpaq/sp73001-73500/sp73204.exe

  But I don't have the driver of WinPE.

  Where I can finf them?

  Thank you

  HP Windows PE 3.0 Client x 86 and x 64 package driver

  http://FTP.HP.com/pub/caps-SoftPaq/CMIT/SoftPaq/WinPE3.html

  64 bit

  sp71913\hp_dt_nb_wks_1.05\x64_winpe3\network\intel\P00KEKB2\Flat\Win7-x64\E1D62x64.inf

  sp71913\hp_dt_nb_wks_1.05\x64_winpe3\network\intel\P00KGXB2\Flat\E1D\E1D62x64.inf

  sp71913\hp_dt_nb_wks_1.05\x64_winpe3\network\intel\P00JPKB2\Drivers\E1D62x64.inf

  32 bit

  sp71913\hp_dt_nb_wks_1.05\x86_winpe3\network\intel\P00KEKB2\Flat\Win7-32\E1D6232. INF

  sp71913\hp_dt_nb_wks_1.05\x86_winpe3\network\intel\P00KGTB2\Flat\E1D\E1D6232. INF

• G3 EliteBook 840: MAC address

  How can I get the MAC address of my computer when there is no installed operating system and the BIOS F1 setting no longer has that info?

  Impossible to find anywhere in BIOS, any number I press.

  @Submarinerbob

  Look under the sim memory.

  840 G3 laptop HP EliteBook - videos to remove/replace

  http://h20464.www2.HP.com/results.htm?SID=7815294 & MEID = A3AC5BD6-A925-4B7F-ADA6-23767F94BA44

  Watch the video to remove/replace for the memory.

  You will see a sticker with the MAC address.

  REO

• HP Elitebook 840: Can how SSD I use to replace my current HARD drive?

  My HARD drive is starting to become a little slow and I want to move to an SSD. I borrowed an empty SSD with a friend to test the speed, but it does not appear in the BIOS. It is a standard Samsung SSD that should work. Is there a problem with my computer or it's compatibility with the SSDbrand or the type problems?

  I am also looking in the upgrade from 8 GB to 16 GB of ram, can someone connect 1 stick of 8 GB of RAM that is compatible with my computer without having to replace the current 8 GB key.

  SSD, I used: Samsung SSD 840 PRO 128 GB (model number: Z-7PD128)

  If you are recognizing my help please consider giving me the 'Thumbs Up' and clicking 'Accept as Solution' if I solved it your problem.

  Hi Devmarti,

  Your hard disk Samsung SSD should work on HP Elitebook 840 G1 as long as he uses the SATA port. You can check the video below to perform the duplication of the OS on your new hard drive before replace you youtube.

  How to set up your SSD

  Step 1: https://www.youtube.com/watch?v=z1GqasEpZ7s

  Step 2: https://www.youtube.com/watch?v=KNJ8b4IeKWE

  How to replace the hard drive: https://www.youtube.com/watch?v=-5ibaLeO4cU

  To upgrade the RAM, you can buy a SDRAM DDR3L, model 1600 MHz.

  I hope this helps. Thank you.

• HP Elitebook 840: Can't see Windows Hello

  I use a HP Elitebook 840 (im not sure if its G1 or G2) and I want to implement Hello windows. My PC doesnet have any fingerprint reader, but it has no built in Web Cam. I tried to reinstall and update the driver for my webcam and have also setup a PIN but I still don't see the Windows Hello option on my sign in the menu options. In my list of driver my webcam is called HP HD Webcam. I want to know how to activate and use Windows Hello.

  -Dark

  Hello

  No, HP HD webcam can not read your eyes and does not support the Hello. You need something like:

  Intel® realsense™ 3d camera (r200)

  More information:

  https://software.Intel.com/en-us/articles/realsense-R200-camera

  Kind regards.

• HP Elitebook 840 NIC problem

  Strange question.  I have a 840 Elitebook with Windows 7 Enterprise 64-bit.   Once installed, I copied the driver on an external disk drive and installed the drivers.  All the drivers are installed with one exception.  When the driver of the CARD sets, the system hangs.  Any movement of the mouse, nothing.  I'm a hard cock down and restart and it freezes on the Welcome screen. If I reboot and go to Safe Mode (without network), it loads up.  I remove the driver and restart and it starts up fine. I searched around for the updated drivers and can not find.  Even the driver on the HP website is the same.   Does anyone have a suggestion?

  The company Win7 - 64 bit

  8 GB Ram

  Nothing else installed.

  Use the free version of this utility called WhoCrashed to see what specifically is the cause of the crash.

  Have you tried the old version of the pilot INC. found here?

• EliteBook 820/840 G3: EliteBook 820/840 G3, Windows 7 Enterprise x 64: LAN/WLAN, switch does not

  Unable to get LAN/WLAN switch to work. The setting is enabled. The LAN WLAN connections and remain active at the same time.

  G3 EliteBook 820 and 840 G3

  Windows 7 Enterprise 64-bit

  BIOS is updated (01.07 Rev.A (June 6, 2016))

  All the drivers are up to date as of today (2016-06-23)

  Have reset to the default values for several times.

  Without success.

  Any idea?

  TIA & BR

  If you install the HP Hotkey support 6.2.18.1 Rev.A. then it works

• HP ELITEBOOK 840 G2: bios password

  I bought a HP ELITEBOOK 840 G2 on a sale at auction in bankruptcy. Unfortunately, it is locked by user mot de passe and bios password. I have all the papers and the DVD with her. It is still under warranty - August 2015. I sent mail to HP support on this matter, but can I do it myself?

  Thank you, I chatt since I live in the Denmark

• EliteBook 840 D1F44AV: Legal re-installation of Windows / COA

  Hello

  Having a sticker of COA that reads HP Windows 7 Pro OA to the back of the laptop means that the laptop comes with legal pre-installed Windows, if so can I use any windows media to reinstall as long as it's the same version, or should I use a HP recovery DVDs? that is important if the Windows I'm trying to install is 32-bit or 64-bit? I ask because I have an Elitebook 840 that has what I think a windows no legitimate Pro 7 32bits and there is no recovery partition.

  Thank you

  b_read

  The presence of a Win7 COA sticker means that the PC has been preinstalled at the factory with a version of Win7 OEM HP.

  You cannot use any version of Win7 to replace that, because only an OEM version will activate using the product key that came with your PC.

  IF you are using an OEM HP's version, it will activate, but HP is more for older PC Win7 recovery media.  Instead, you must check this site to see if they still carry the media for your PC: http://www.computersurgeons.com/ and http://www.restoredisks.com/

  From the point of view of activation, it doesn't matter if it's 32-bit or 64-bit, because they use the same product key, but if you are installing a different version, you may not be able to find the HP drivers for it, as HP mainly provides 64-bit computers.

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• EliteBook 840: Elitebook 840 G1

  I have a HP Elitebook 840.

  The hard drive has failed.

  I got a replacement he mounted and installed the operating system very well.

  There is a fast Intel storage option that fake upward on the screen just prior to loading of the operating system.

  CTRL & I to enter, when I go in there I see a RAID volume called cache_Volume 29.8 Go, it is disabled.

  There are 2 physical features listed:

  0: HGST hard drive (I've just adapted) - is listed as a Non RAID drive

  1: LSS Liteonit-32 - cache drive (0)

  The only options are to reset disks to reset no RAID disks or exit (photo attached).

  How to configure the RAID to integrate the new drive?

  Utilities 2 below are required.

  Both configured from windows.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5405097 & swItemId = ob_149613_1 & swEnvOid = 4059

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5405097 & swItemId = ob_132986_1 & swEnvOid = 4059

• HP Elitebook 840 3: Adapter for HP Elitebook 3 840

  Can I use a HP 756413-002 power adapter to power my laptop HP EliteBook 3 840?  the power output is 65w but the OE adpater has a power output of 45w.

  Hello

  I can't find in party store 756413-002

  http://PartSurfer.HP.com/search.aspx?SearchText=756413-002

  but the HP Elitebook 840 G3 accept 45W both 65W adapters as shown:

  Voltage and current:

  • 19.5 v dc @ 2.31 A - 45 W
  • 19.5 v dc @ 3.33 A - 65 W

  In fact, I use the PSU bit for my laptop. For travel, I use a lighter (low power)...

  Kind regards.

• HP EliteBook 840 G3: Laptop HP 840 G3 have byte and build id

  have byte and build IDs for HP EliteBook 840 G3 to change motherboard

  AVAILABLE: 15WWCSBA601 #SABV (case sensitive) #DABV

  FB: 3X476J6S6b757H7M7Q7W7saBaEapaqauawbPbSbU bhcAcedQ.RD (respect for case-sensitive)

  HP assistance form