HP Elitebook 840 g3: HP Elitebook 840 g3 or Off to turn on a backlit keyboard

Similar Questions

• What is this connector for the backlit keyboard? (with photo) EliteBook 8760w

  I recently bought a workstation EliteBook 8760w Mobile with the standard keyboard (not backlit).  I really, really, REALLY want to replace the keyboard with a backlit.  I think I found the connector to the Ribbon of bavklight, but I would like confirmation before ordering a new keyboard.  Can (will?) someone please let me know if the arrow on the picture is oriented on the backlight Ribbon connector?  It seems to be in the right place, based on images of the underside of the backlit keyboard for the 8760w.  Thanks in advance for any help!

  Yes, there is nothing else, it might actually be.

• EliteBook 8740w thinks that the lid is closed, but it is open?

  Hello

  I have an EliteBook 8740w running Windows 7 64 bit and I have a strange problem where the laptop seems to think that the cover is closed when it is open.

  If the cover is open, the screen is off the touchpad and keyboard, the two do not work and not the function of the buttons volume or wifi. When the screen is almost completely closed the screen turns back on, the keyboard and the mouse are beginning to work again, but it is not usable, because it is about 5 degrees, far from fully closed.

  It seems that it is just reverse how it is supposed to work?

  All this happened when I unplugged my power cord. The screen turned white and it has been in place since then. I tried several reboots, nothing seems to recover.

  I can run on my external monitor very well, so the laptop seems to be otherwise functional

  Thanks in advance for any ideas

  Maybe you did not reset properly.

  Remove the battery and adapter and all the things connected to the laptop.

  Hold the power button down for 1 full minute and only plug the adapter back to (do not insert the battery) and start.

  The next time you stop everything, install the battery.

• Disable the touchpad on HP 6530 b

  Can someone help me to disable my touchpad on a 6530 b?  I use a mouse and the cursor jumps around.  The driver for the touchpad did not exist originally, but I managed to download the Symantic driver, but the 'disable' button is grayed out, and nothing seems to work.  Thanks for your suggestions.

  Take a look on this thead element >

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/HP-6530b-how-do-you-turn-off-the-touch-pad-with-out-using-the/TD-p/2355389#.U5m9Da7FKSo

  Also in the mouse properties, select start > Control Panel > printers and other peripherals > mouse.

  You can find a framework here to toggle touchpad on & off the coast in anticipation of time fixed, external mouse which is very convenient

• HP DV6T; compatible with SATA II or SATA III?

  Hello world

  I would like to change the HARD drive in my HP DV6T Select Edition, product # XC102AV that I bought in December 2010 for one SSD, possibly the 840 Samsung EVO (2.5 ", either 250 GB or 500 GB SATA III).

  I was not able to know whether my system is compatible with SATA III.

  Can you please help me, will be the work of Samsung SSD using a SATA II or SATA III speed?

  Thanks for all your help in advance!

  Steve

  thesuperman21 wrote:

  Thank you very much for your answer!  The processor I have is the Intel Core processor i5 - 580 M Dual Core (2.66 GHz, 3 MB L3 Cache) with Turbo boost up to 3.33 GHz.

  Here is the entire system, if it helps at all:

  • • Genuine Windows 7 Home Premium 64-bit
  • • Recovery of the system DVD with Genuine Windows 7 Home Premium 64-bit
  • • Processor Intel Core i5 - 580 M Dual Core (2.66 GHz, 3 MB L3 Cache) with Turbo boost up to 3.33 GHz
  • • 1 GB ATI Mobility Radeon (TM) HD 5650 switchable graphics [HDMI, VGA] - for Dual Core processors
  • • FREE upgrade to 8 GB of memory (2 DIMMs) DDR3 system
  • • 640 GB HDD at 7200 RPM with HP ProtectSmart hard drive Protection
  • • No additional desktop software
  • • No additional security software
  • • 9-cell lithium-ion (size too)
  • • 15.6 "diagonal HD HP Brightview Widescreen (1366 x 768) LED display
  • • Touch screen with intuitive multi-touch applications of the HP TouchSmart (including the HP TrueVision Webcam)
  • • Blu - ray writer & SuperMulti DVD burner
  • • Intel Wireless-N card with Bluetooth
  • Backlit keyboard with fingerprint reader
  • • HP Home & Personal store in box-envelope

  If you don't mind not confirm that it is SATA II for me, I really appreciate it!  Thanks again!

  Steve

  I found a review for this laptop, so I don't know the specs. The first SATA III support for HP laptops are series Dv6-6000, Sandy Bridge, which is the second generation of Intel processors. It starts with Core iX-2XXX. Means that your laptop is certainly a SATA II one. I got it so I know for sure.

• EliteBook 840 G3: Two monitors and laptop screen problem external EliteBook 840 G3 and 2013 UltraSlim Dock (D9Y19AV #ABB

  Hello

  New EliteBook 840 G3 with discrete graphics and 2013 UltraSlim Dock using windows 10.

  I use 2 HP Z23n screen, there are connected with DisplayPort on Dock UltraSlim 2013 2.

  I have 1 questions with this

  (1) my 2 external displays connected to the 2 DisplayPort, started flashing then goes blank and returned once again without flickering. Very annoying. Seems that the graphics card a little reset on screen or the other from time to time. Tried to look at the logs without a bit of luck.

  Any ideas?

  2.30 firware link

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_165723_1 & lang = to & cc = us & hprpt_id = HPGL_ALERTS_1906111 & jumpid = em_alerts_us-us_May16_xbu_all_all_693375_1906111_DesktopsWorkstationsLaptopsandHybrids_recommended__.

• EliteBook 840 G2: USB3.0 driver for Elitebook 840 G2

  Hello

  I use Elitebook 840 cell G2 and Setup driver USB3.0 (file: SP69862). However, the software poped error message (the Installer failed to install one or more device drivers) at the end of the installation. You can reference attach the file Setup log in link here.

  Please help me solve this problem. Thank you!

  Hello:

  See if the driver directly from Intel works...

  Download, unzip and run the setup.exe file.

  https://Downloadcenter.Intel.com/download/22824/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-8-9-100-series-and-C220-C610-chipset-family

• HP EliteBook 840 G3: Why BIOS version 01.07 (sp76235) is pulled? (G3 EliteBook 840)

  Anyone know why the BIOS version 01.07 (sp76235) for EliteBook 840 G3 is taken?

  Link to the BIOS:
  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_167436_1 & swEnvOid = 4054

  The date is 1 January 3000 so he has obvisoly something wrong and HP do not want to install, I have deployed it to a large number of machines and would like to know what kind of questions, it is hoped.

  A new version 01.10 came out with these fixes:

  -Fixes a problem that causes the display to become visually distorted (flicker).
  -Fixes an issue where a system running Windows 7 with active hard drive encryption is unable to power (boot) after the BIOS is updated.
  -Prevents the BIOS downgraded below the 1.09 version.
  
  NOTE: After loading the BIOS version, older versions of BIOS may not be installed.

• EliteBook 840 G3: Driver for HP Elitebook 840 G3 to ACPI\HPQ6007 on Windows 7

  I'm looking for a driver for the unknown device "ACPI\HPQ6007" on the HP EliteBook 840 G3 for WIndows 7 64-bit OS. And I don't know which driver is the following.

  Any help will be appreciated.

  Thanks in advance.

  Hello:

  Try the link to the support page for your laptop... click on the download button blue on the right side of the page.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_169887_1

• HP elitebook 840 g3: need driver Win PE for hp elitebook 840 g3

  Hello

  I need driver Win PE for hp elitebook 840 g3.

  I download ftp://ftp.hp.com/pub/softpaq/sp73001-73500/sp73204.exe

  But I don't have the driver of WinPE.

  Where I can finf them?

  Thank you

  HP Windows PE 3.0 Client x 86 and x 64 package driver

  http://FTP.HP.com/pub/caps-SoftPaq/CMIT/SoftPaq/WinPE3.html

  64 bit

  sp71913\hp_dt_nb_wks_1.05\x64_winpe3\network\intel\P00KEKB2\Flat\Win7-x64\E1D62x64.inf

  sp71913\hp_dt_nb_wks_1.05\x64_winpe3\network\intel\P00KGXB2\Flat\E1D\E1D62x64.inf

  sp71913\hp_dt_nb_wks_1.05\x64_winpe3\network\intel\P00JPKB2\Drivers\E1D62x64.inf

  32 bit

  sp71913\hp_dt_nb_wks_1.05\x86_winpe3\network\intel\P00KEKB2\Flat\Win7-32\E1D6232. INF

  sp71913\hp_dt_nb_wks_1.05\x86_winpe3\network\intel\P00KGTB2\Flat\E1D\E1D6232. INF

• G3 EliteBook 840: MAC address

  How can I get the MAC address of my computer when there is no installed operating system and the BIOS F1 setting no longer has that info?

  Impossible to find anywhere in BIOS, any number I press.

  @Submarinerbob

  Look under the sim memory.

  840 G3 laptop HP EliteBook - videos to remove/replace

  http://h20464.www2.HP.com/results.htm?SID=7815294 & MEID = A3AC5BD6-A925-4B7F-ADA6-23767F94BA44

  Watch the video to remove/replace for the memory.

  You will see a sticker with the MAC address.

  REO

• HP Elitebook 840: Can how SSD I use to replace my current HARD drive?

  My HARD drive is starting to become a little slow and I want to move to an SSD. I borrowed an empty SSD with a friend to test the speed, but it does not appear in the BIOS. It is a standard Samsung SSD that should work. Is there a problem with my computer or it's compatibility with the SSDbrand or the type problems?

  I am also looking in the upgrade from 8 GB to 16 GB of ram, can someone connect 1 stick of 8 GB of RAM that is compatible with my computer without having to replace the current 8 GB key.

  SSD, I used: Samsung SSD 840 PRO 128 GB (model number: Z-7PD128)

  If you are recognizing my help please consider giving me the 'Thumbs Up' and clicking 'Accept as Solution' if I solved it your problem.

  Hi Devmarti,

  Your hard disk Samsung SSD should work on HP Elitebook 840 G1 as long as he uses the SATA port. You can check the video below to perform the duplication of the OS on your new hard drive before replace you youtube.

  How to set up your SSD

  Step 1: https://www.youtube.com/watch?v=z1GqasEpZ7s

  Step 2: https://www.youtube.com/watch?v=KNJ8b4IeKWE

  How to replace the hard drive: https://www.youtube.com/watch?v=-5ibaLeO4cU

  To upgrade the RAM, you can buy a SDRAM DDR3L, model 1600 MHz.

  I hope this helps. Thank you.

• HP Elitebook 840: Can't see Windows Hello

  I use a HP Elitebook 840 (im not sure if its G1 or G2) and I want to implement Hello windows. My PC doesnet have any fingerprint reader, but it has no built in Web Cam. I tried to reinstall and update the driver for my webcam and have also setup a PIN but I still don't see the Windows Hello option on my sign in the menu options. In my list of driver my webcam is called HP HD Webcam. I want to know how to activate and use Windows Hello.

  -Dark

  Hello

  No, HP HD webcam can not read your eyes and does not support the Hello. You need something like:

  Intel® realsense™ 3d camera (r200)

  More information:

  https://software.Intel.com/en-us/articles/realsense-R200-camera

  Kind regards.

• HP Elitebook 840 NIC problem

  Strange question.  I have a 840 Elitebook with Windows 7 Enterprise 64-bit.   Once installed, I copied the driver on an external disk drive and installed the drivers.  All the drivers are installed with one exception.  When the driver of the CARD sets, the system hangs.  Any movement of the mouse, nothing.  I'm a hard cock down and restart and it freezes on the Welcome screen. If I reboot and go to Safe Mode (without network), it loads up.  I remove the driver and restart and it starts up fine. I searched around for the updated drivers and can not find.  Even the driver on the HP website is the same.   Does anyone have a suggestion?

  The company Win7 - 64 bit

  8 GB Ram

  Nothing else installed.

  Use the free version of this utility called WhoCrashed to see what specifically is the cause of the crash.

  Have you tried the old version of the pilot INC. found here?

• EliteBook 820/840 G3: EliteBook 820/840 G3, Windows 7 Enterprise x 64: LAN/WLAN, switch does not

  Unable to get LAN/WLAN switch to work. The setting is enabled. The LAN WLAN connections and remain active at the same time.

  G3 EliteBook 820 and 840 G3

  Windows 7 Enterprise 64-bit

  BIOS is updated (01.07 Rev.A (June 6, 2016))

  All the drivers are up to date as of today (2016-06-23)

  Have reset to the default values for several times.

  Without success.

  Any idea?

  TIA & BR

  If you install the HP Hotkey support 6.2.18.1 Rev.A. then it works