Equium A110-238 - product recovery stops after 1 disc

Similar Questions

• Satellite A30 recovery stops after 15%

  Hello
  I have laptop satellite A30. When I tried to do a restore with the Toshiba Recovery CD, it started to format my hard drive I think. But when the progress bar reaches 15%, my computer shuts down. No mater how many times I ve tried I did the same thing. Now I'm stuck and can even get into Windows.
  Can someone help?

  Thank you!

  Hi Takis,

  The most likely cause of this behaviour is a bad hard drive. When the recovery process reached the defective area of the platters in the car he try again several times but then close the laptop.

  If you have access to all utility disk (such as Norton Disk Doctor) you could try a scan of your hard disk surface to check bad sectors.

  Kind regards

• Satellite A10 - arrested after 25% product recovery

  My laptop froze and does not restart then uses the product recovery discs to reboot but the first time it stopped at about 25% of the way through and then I tried again and it's going very slowly.
  It says 27 remaining hours. Any help would be appreciated.

  See you soon

  Hello

  I can't say for sure why this happens. Try to please several times and don't forget, it stops every time after 25%. Post the output please.
  It may be that the HARD drive has a problem with bad sectors and the recovery image cannot be written properly on the HARD drive.

• Product of Equium A200 - support failure recovery

  Hello

  I have a laptop Toshiba Equium A200. After restarting itself a number of times where he died and is now on autoloop on-screen system recovery, that does not work.

  I tried to use the product recovery disc, but I keep getting "media test failure.
  Someone has ideas how to proceed?

  Hello

  Start your laptop and press F12 when you see Toshiba welcome screen to enter the boot menu.
  Place the recovery disc into the optical disc drive.
  In the start menu choose CD/DVD and press ENTER.

  What happens when you do this?

• Need for a disk recovery for Equium A110-252 (model PSAB2E)

  Can someone point me in the direction to get a Toshiba Equium - A110 - 252 Lap Top recovery disk?
  Or if someone has such a drive. I appreciate a loan - or - buy from them! Thank you

  Mostyn

  This satellite is the old model of laptop and I believe that you can not order a copy on https://backupmedia.toshiba.eu/landing.aspx
  But you can try to contact the nearest Toshiba authorized provider and ask if they can help.

  Otherwise, you can install OS using Microsoft facilities drive. All the necessary drivers, tools and utilities that you can download at Toshiba supports the page.

• Product recovery disc stops

  Bought Toshiba recovery disks and have problems with a stop in this facility.
  It stops after copying F:\ZZImg\09820XSP6 6/6. Management of stormwater to V:\HDDRecovery\SWImg since the first disc (of ten).

  This is a view he says: Please insert next recovery media (containing the F:\ZZImg\09821XSP file. STORMWATER MANAGEMENT)!

  When I don't put on disk in no 2 it says on the screen: not able to open file split 0 F:\ZZImg\09821XSP. Management of stormwater to read

  What's wrong? Tried 3 times and it stops at the same place.

  / Wie

  Hmmm, it looks like a disc damaged or defective.
  Maybe you should try the procedure again
  If this does not work, then you should get in touch with the guy that sells this drive and should get another new

  See this article from Toshiba:
  Questions and answers about the recovery DVD drive
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=75

  Here, I found this:
  + My Windows ordered cannot be installed. (An error occurred during the installation) +.
  + Make sure your optical disc drive works OK and try again. +
  + If the error persists, you can send the DVD back to Arvato and you will get a new drive for free. +

• Equium A110: Cannot use LAN after wake up from hibernation or standby

  Hi guys

  I can't use lan on my tosiba equium A110 after he wakes up from hibernation or standby. Lan icon there is bur that the internet will not work. Please help me.

  Another problem. When I try to cut something I can't paste it if I open a new folder. I need to keep the file open back cut once again and then paste it. I mean that if after the cut, I open any folder it won't paste it.

  Please help me.

  Thank you

  Hello

  Have you tried to update the connection? Something similar happens on my laptop, but not with LAN but with WLan. If you right click on the little icon of lan, you will see the option to repair. Check it out.

  Also found this possibility. I put t know if it will help but try it.
  1. go to [start]-> [Control Panel]-> select [System]
  2. the system properties dialogue box select [Hardware] tab-> click [Device Manager]
  3. in the Device Manager dialog box, select [network adapters]-> double-click [Intel (r) PRO/100 VE Network Connection]
  4. go in the [Advanced] tab-> property [Wake on settings] select-> Select [Wake on Magic & realized]
  5. Press [OK] to close the dialog box.

• Equium A110 stops automatically

  Hello

  This is my first post and I did a search to try to find a suitable place for the post, so please do not kill me if this isn't in the right place.

  My Equium A110 cut twice today and when I felt the base it was incredibly hot. It tends to become hot enough normally, but usually the fan comes into play. I have a feeling that the fan has stopped working.

  -What is reasonably fast/cheap replaced?
  I'm not remotely technical interest, but I don't want to spend days or weeks with no service online at home.

  Hello

  Seems the laptop overheating and that is why it automatically stops to prevent the equipment from damage.

  I've read several times about similar issues and generally, this happens if the cooling modules n t work properly because of the dust and debris inside the cooling rack.

  If your vents are clogged, you can remove the dust using the compressed air jet that could be ordered at a computer retailer.

  If it doesn't help then you should contact the ASP in your country, as it may be possible that your cooling modules a malfunction.
  In addition, the technician must check if the thermal grease is ok or if it of necessary to renew it.

  Last but not least, you must use your laptop on the desk where is enough free space around the laptop. It is very important to ensure good air circulation costs.

  Good luck

• Photoshop CS3 does not start with popup indicating that "licensing for this product has stopped working" I tried uninstalling and reinstalling 3 times, including after you run CCCleaner tool.  Any help would be appreciated?

  Photoshop CS3 does not start with popup indicating that "licensing for this product has stopped working" I tried uninstalling and reinstalling 3 times, including after you run CCCleaner tool.  Any help would be appreciated?

  Same fixed.  At executed license repair tool, Adobe - Adobe licensing repair tool, and it fixed the problem.

• Equium A100-027: need product recovery disc

  Good afternoon

  I was wondering if you could help me at all the

  My A100 became really slow and unstable. So decided to use the product recovery disc, but found to be scratched.
  I tried to use a disc repairman but have had no joy.

  I have the original product recovery cd and good purchase is anyway to get a new drive of toshiba.
  The laptop was purchased directly from curries and is one year old.

  Any help would be appreciated.

  Thank you very much

  Hello

  Have you seen another thread here in the forum about the purchase of restore CD?
  I m what you did!

  So the solution is very simple! You must contact the service provider allowed in your country and to order a new recovery CD Toshiba laptop you.

  All that s!

• How to restore my Equium A110 to the factory setting by using the product CD?

  Hello

  My laptop crashed and it was basically the problem hard drive according to my understanding.

  I bought a new identical hard drive on the laptop and when I run the product recovery CD, it starts and then on the choice of the language, he says there is no language selection and connect in some BACK...

  I don't know how to restore my laptop using the default product recovery CD. Can someone be kind enough to walk me through step by step or point me in the right direction if there is already a thread on this forum.

  Thank you all for the cooperation.

  Rob

  Hello

  Laptops are specific products of countries recovery image on a single language. You cannot choose a different languages.

  Start the installation of recovery, don t change simply follow the menu on the screen and try to start the recovery image installation.

• Equium A60-173: need product Recovery DVD-Rom

  Hey guys, I was wondering where I can buy a product recovery dvd - rom for my laptop and if there is an online shop can you please provide a url?

  Thanks in advance.

  Hello

  The only place where you can order the original Toshiba Recovery DVD is authorized service partner. Please check this page http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true

  Good bye

• Satellite A210 - 4 1: Winload.exe problem after having used the product recovery disc

  Hello

  I could really do with some help here. I have a PC laptop Toshiba Satellite A210 - 1 4. Disk partitioned with Vista home premium service pack 4.0.

  Last night, I used the product recovery disc supllied with the laptop in an attempt to restore its initial configuration.

  and the end of the procedure, I find myself with a prompt cmd with X:\windows\system32\cmd.exe in the high bit blue box indicating:

  Error: imageX could not apply vista F:\05993xsp.swm Index 2 of ODD to C:\!

  Press a key to continue. Box disappears then an administrator: X:\windows\system32\cmd.exe in the top blue bit indicating:

  waiting for ODD vacancies...
  STRANGE drive f: loan.
  Look for support in the F: drive...
  Failed to initialize the raid class.
  No RAID - continue normally...

  X:\Windows\System32 >

  Now every time the laptop trying to restart it just comes up with the error message:

  CANNOT START WINDOWS. A RECENT HARDWARE CHANGE OR SOFTWARE MAY BE THE
  CAUSE
  FILE: \WINDOWS\SYSTEM32\WINLOAD. EXE
  STATUS: 0XC000000E
  INFO: THE SELECTED ENTRY COULD NOT BE LOADED BECAUSE THE APPLICATION
  IS MISSING OR DAMAGED

  Below I have then have the possibility of esc or continue with the same result of the system attempts to restart.

  The recovery disc has no option of repair on this subject.

  need help please, I have no idea.

  Thank you

  Hello

  Looks like something was wrong during the recovery procedure.
  Have you tried to recover the laptop once more?
  If this isn't the case, you should definitely try this!

  You are right; hasn t drive recovery option for the repair because the recovery disk is not the same as a MS Vista drive. The recovery disk contains image files (it s a package) and the files contains Vista, Toshiba drivers, tools and additional software.

  So if something was happening well wrung out during the recovery procedure, you will not be able to repair the installation of the OS, but you need to run it again.

• Equium A110-252 freezes after formatting DVD - RW

  Bought the computer laptop satellite A110-252 a couple of days to replace my desktop computer that mistaken for suicide. I try to create DVDs to play on my DVD, AVI and WMV player using the supplied software ie. InterVideo WinDVD Creator 2.

  The first attempt, converting a small file WMV MPEG-2, burned and played but when I went back to erase/format the disc and burn full disk file had been damaged and marked read-only, windows completely Explorer freeze because he tried to access the D: / drive.

  In addition, all attempts convert and burn the result in no data being burned and the drive being rendered useless later. Did not attempt any burn more that I am running out of discs to test.

  Use the Hitachi LG Equium A110-252 DVD Super Multi GMA-4082N

  Using Memorex DVD - RW media

  If anyone else has had this problem and more importantly, knows how to solve this problem. What is the DVD itself support? Looked for a list of support preferred for this drive but had no luck so far. They worked fine on my previous LG DVD +-RW on my desk now buried.

  Any help will be most appreciated.

  Thanks in advance :)

  Hmmm, believe me, it of not easy to say what's wrong or why it occurs.

  How have you tried to erase the DVD - RW? What applications did you use?
  It seems that the application caused the laptop freezing.
  Why? Who knows try using another type of DVD - RW and try to use various means to erase the DVD - RW.

  Nero burning rom application is a very interesting tool and provide many different options. You can use it to erase DVD - rw

• Create product recovery media does not work after restoring to factory settings

  Updated my T500 from 160 to 320 GB.

  First of all, ran the RnR restore to factory settings with the product recovery media that I made earlier. And then restored my C: volume from my Windows Home Server backup.

  Everything seems as usual except my service partition is now f: instead of S: and my Lenovo partition is H: instead of q:-I tested it I can get into the RnR with F11 service partition.

  But when I try to create new recovery media product the ICT box is grayed out on the first prompt so I can't continue. Put back the partition of Lenovo on q: in disk management has not changed anything, he would let me change the letter of the service partition.

  It's no big deal - I still have my original disks - but it would be good to know what I could improve for the next time I have to do a restore.

  Think that I thought about it - when I restored my C volume I also restored a version of RnR who 'knows' I already burned disks. So next time if I want to burn new disks, I need to do on the version of the system factory setting before you restore the volume C:.