HP Elitebook 850 G1 (Windows 8.1) 0xc0000225 error Code

Similar Questions

• HP Envy 17: 0xc0000225 error code won't BOOT HP ENVY 17

  Trying to turn on, get the Error Message:

  0xc0000225 error code

  Your PC could not start properly

  The NEW blue screen of death!

  The computer was loaded just a few Microsoft updates last night before stopping.

  10 64-bit Windows

  Where do we go from here?

  The error code and the situation are not addressed by Microsoft and hours of work-around so did not work.  Recovery disk was ineffective as a myriad of Internet solutions.

  I had to buy a CD of Windows 10 for $150, and enter the BIOS to boot from the CD Ms.  Once I had the opening screen, I selected "REPAIR".  2.5 HOURS later, I was back to and all running programs.

  MS scammed me once again... Thank you Bill Gates!

  SDJL THANKS for the reply.

• HP 250 Portable G2: 0xc0000225 error code. Hard drive is not accessible, computer laptop HP 250 G2

  I'm doing a clean Windows 8.1 64-bit as a result of a fall, but I'm getting 0xc0000225 error code, using built-in HP recovery utility. Installing Windows also says: Windows could not retrieve information about the disks on this computer. Kindly help. Thank you

  If your computer is originally shipped with Windows preinstalled by HP (as it should) - it would be better to use the HP recovery media that will repair Windows, applications, and all the default partition to factory. It will use the license of your machine for Windows and should automatically active Windows after installation.

  If you are using the 8.1 Windows installation media, you may need a facility to post license Win (depending on the type of used windows).

  -If you want to use the original that are preinstalled windows, you can get a HP recovery media as described above

  -If you are using the 8.1 Windows installation disc and install Windows from using your driver's license, follow these steps:

  1 boot from the Windows DVD
  2. click on install now
  3. in the configuration screen, click Custom (Advanced)
  4. click on Drive Options
  5. Select the partitions to format
  6. click on Format - this will delete EVERYTHING on this partition - format and delete all partitions
  7. create a new partition, and then select a partition to install Windows on.
  8. continue the installation.

  If the Windows installation disc does not work for the above you can do the following to reformat your hard drive:
  1. download a Gparted ISO from here:
  http://gparted.org/LiveCD.php

  2 burn the ISO to a CD or DVD
  2. start from the CD/DVD of Gparted disk.
  3. use Gparted to delete all partitions on the hard disk.
  4. under 'Device' choose Create Partition Table to a new table partition.
  5. create a NTFS partition (or you can wait and create a partition during the installation of Windows).

  Finally, boot from the Windows installation disc and install Windows.

  Let me know if it works for you

• Access to the Windows Update site 0x8024402C error code failed?

  Access to the Windows Update site 0x8024402C error code failed? Regds, 'a journey of a thousand miles begins with a first step."

  Resolution: 0x8024402C error Code

  Method 1: Remove the characters from the list of exceptions to the proxy and then clear the proxy cache to do this, follow these steps, as appropriate for the operating system that you are running. Windows 2000, Windows XP and Windows Server 2003

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the menu is not available in the Internet Explorer window, press the ALT on the keyboard to display the menu.

  3. Click the Connections tab and click LAN settings, and then click Advanced.
  4. Remove all the entries in the Exceptions section, and then click OK.
  5. Close Internet Explorer.
  6. Click Start, run, type cmd, and then click OK.
  7. Type the following commands. Press ENTER after each command.
     • proxycfg d
     • net stop wuauserv
     • net start wuauserv
  8. Try again to install updates.

  Windows Vista and Windows Server 2008

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the menu is not available in the Internet Explorer window, press the ALT on the keyboard to display the menu.

  3. On the Connections tab, click LAN settings, and then click Advanced.
  4. Remove all the entries in the Exceptions section, and then click OK.
  5. Close Internet Explorer.
  6. Click Start
     The collapse of this image enlarge this image

     

     , and then type cmd in the box start the search.

  7. In the list of search results, right-click on Cmd.exe, and then click Run as administrator.
     The collapse of this image enlarge this image

     

     If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  8. Type the following commands. Press ENTER after each command.
     • netsh winhttp reset proxy
     • net stop wuauserv
     • net start wuauserv
  9. Try again to install updates.
   

  Method 2: Enable the option "Automatically detect connection settings" in Internet Explorer to do this, follow these steps:

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the Tools menu is not available in Internet Explorer, press the ALT key to display the menu.

  3. On the Connections tab, click LAN settings.
  4. Click to select her automatically detect settings check box, and then click OK.
  5. Try to install updates again.

  Kind regards
  Sohail Patel Regds, 'a journey of a thousand miles begins with a first step."

• Windows Update 8007371 B error code «»

  I spent from Vista to Windows 7, use PCMover to help transfer. I'll have two problems (1) won't install Norton anti-virus (Norton is okay) and update of windows gives me an error code "8007371B".  Any ideas? Thank you

  Try:

  Description of the system update tool for Windows Vista, Windows Server 2008 for Windows 7 and Windows Server 2008 R2http://support.microsoft.com/kb/947821>

  The 0x8007371B error can be caused by an irregularity of the system that theSystem Update Rpoints Tool may be able to solve. However, the tool may be unable to fix all instances in which these errors occur.

• Unable to get the windows updates. Get error code 80072EFE. Help!

  Unable to get the windows updates. Get error code 80072EFE.  Help!

  Gary,

  ERROR_INTERNET_CONNECTION_ABORTED 80072EFE

  You may experience temporary errors related to connection when you use windows update or microsoft update to install updates http://support.microsoft.com/kb/836941

  by running the Fixit on this page, you can reset to windows update components.  but, if there is malware present, she will continue to reset the connection to the update servers: how toreset windows update components

  suggest you download and save the Fixit.  then conf is the boot vlean system before you run it:http://support.microsoft.com/kb/971058

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7http://support.microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native vista firewall is now on if a 3rd party firewall has been used previously.  now run the Fixit and choose the default mode.  restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode.  turn it back on when he finished the race and updates.

• Windows Update KB948465 8024200d error code failed.

  Windows Update KB948465 8024200d error code failed.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  [0 x Error 80070002; 0x8007000D; 0 x 80073712; 0x800B0100; & 0x8024200D]
  http://support.Microsoft.com/kb/947366

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• MSE uninstalled by an automatic update of Windows XP SP3. Error code 0 x 80070642.

  MSE uninstalled by an automatic update of Windows XP SP3.  Error code 0 x 80070642.
  It will not reinstall.  Tried to restore the operating system to an earlier date.
  Have tried to repair the original operating system with the OS installation CD.
  Spin without MSE and tasked a free anti-virus software in the meantime.

  For problems with Microsoft Security Essentials, you can submit to submit a support case online.

  Note: You may need to remove avast completely before attempting to reinstall MSE.

• I can't install the updates of Windows on Vista. Error code is that 80246008-Windows Update encountered an unknown error.

  I can't install the updates of Windows on Vista. Error code is that 80246008-Windows Update encountered an unknown error.  Help had two suggestions being to check to see if the Background Intelligent Transfer Service is running, and I don't have the service installed, it is the problem.  What should I do?

  Hi Nita,

  Thanks for posting your question in the Microsoft Community forums.

  The description of the problem, I see that you are unable to install Windows Update and receive the error code 80246008. I also see that the PIECES is not in services.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  The 80246008 error code may occur if the (BITS) Background Intelligent Transfer Service is not started or is configured incorrectly.

  I suggest you try the procedure described in the article and see if it helps.

  Error message when you search for available updates on the Windows Update Web site or on the Microsoft Update Web site: "0 x 80246008.
  http://support.Microsoft.com/kb/956706

  Let us know the status of the issue after you perform the troubleshooting steps. If you need to get assistance or information about this problem with Windows Update, I'll be happy to help you. We, at tender Microsoft to excellence.

• Try to update windows - (8007000D - has no error code) stops windows completely updated. Fixes for this error code?

  I tried to completely update of windows, but the 8007000D error code keeps causing the update fails. The update is for - Cumulative Update for Media Center for Windows Vista (KB982480). Could you be it someone please let me know if there are patches to get rid of this error, or get the update to pass by? Thank you!

  Hello

  You are able to install some other updates?

  I suggest you follow these methods and check.

  Method 1: Run the fixit.

  The problem with Microsoft Windows Update is not working:

  http://support.Microsoft.com/mats/windows_update/   

  Method 2: Run the clean boot and install the updates.

  To do this, follow the steps in this link:

  http://support.Microsoft.com/kb/929135

  NOTE: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

  If the method above does not work, proceed to the next method.

  Method 3: download and install the Cumulative update for Media Center for Windows Vista (KB982480) from this link.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=6256

  If the method above does not work, proceed to the next method.

  Method 4: Rename the Software Distribution folder.

  Rename the temporary Windows Update Software Distribution folder. To do this, follow these steps:

  1. Open an administrative command prompt window.
  2. Run the following commands and press ENTER after each command:
  3. 1. Net stop wuauserv
     2. CD %SystemRoot%\System32
     3. Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
     4. Net start wuauserv
  4. Try to install updates again.

  Important: When you use this method, the following problems occur:

  ·         Updates that are currently downloaded but which have not yet been installed must be downloaded again by using Windows Update or Microsoft Update.

  ·         When you remove the Software Distribution folder, your download history is deleted.

  ·         If you currently receive updates from Microsoft Update and Windows Update, you will need to reselect this option from the Windows Update Web site.

  Note If the problem is resolved and you can successfully download and install the updates, you can safely remove the SoftwareDistribution.old folder to recover disk space.

  I hope this helps!

• Windows vista update 80246008 error code

  Windows vista update 80246008 error code

  You must be logged in as an administrator to perform these steps.

  If you receive Windows Update 80246008 error when downloading updates, you might need to change the (BITS) Background Intelligent Transfer Service or the Windows event log service settings and restart each service.

  To change or restart the Service (BITS) Background Intelligent Transfer

  1 open administrative tools by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

  2. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3 right-click the Background Intelligent Transfer Service (BITS) service and then click Properties.

  4. under the tab general , next to Startup type, make sure that Automatic (delayed start) is selected.

  5. next to Service status, check whether the service is started. If not, click Start.

  To change or restart the Windows event log service

  1 open administrative tools by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

  2. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. right click on the Windows event log service and then click Properties.

  4. under the tab general , next to Startup type, make sure that Automatic is selected.

  5. next to Service status, check whether the service is started. If not, click Start.

  If the problem persists after you follow the steps above, go to the Windows Update Support Center website to request support by e mail. https://support.Microsoft.com/OAS/default.aspx?Gprid=6527&St=1&wfxredirect=1&SD=GN>

  OR

  Try here and see if Russell Pope is available, if not, try another available technology.

  http://supportservices.Microsoft.com/support/services/windows_update>

  UTC/GMT is 10:53 on Sunday, December 25, 2011

• Windows Live Photo Gallery error code: 0x800736b1

  Windows Live Photo Gallery error code: 0x800736b1 (window live photo gallery encountered an error loading WLK Photo LibraryMain.dll and cannot start.  Need to know how to fix it

  I got tired of what you say, and it has not fixed the problem. always the same error message. I tried to uninstall and reinstall windows live photo Ghent will not always work.

  Hi tlc33kac

   

  You can check the links below and check out them if the steps to help you resolve the issue-

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/i-try-to-open-a-photo-on-Windows-Live-Photo/74e26c19-9376-E011-8dfc-68b599b31bf5

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-pictures/error-codes-ox80073661/e2b11700-fe86-4663-8f27-731b67ebaf12?msgId=b95e5d54-5da2-497d-a2fc-80a9ec672a59

  If the problem persists, you can contact the Windows Live support team. I would recommend posting your query to community specific to Microsoft Windows Live. Please visit the links below to find a community that will support what ask you in the right direction for Windows Live.

  http://windowslivehelp.com/product.aspx?ProductID=20

   

  I hope this helps.

• When the updates of windows I get and error code for 643. How can I fix it?

  When the updates of windows I get and error code for 643. How can I fix it?

  When the updates of windows I get and error code for 643. How can I fix it?

  Here is an answer which is marked as an answer to the error code 643.

  I also participated in that thread, and I gave my suggestions.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/what-is-error-code-643-Windows-vistaunable-to/4ab6dd4e-e9eb-4a0f-b822-ad976e2c33c6

• Try to install 4 ' important'updates on Windows Vista and get error codes: 80070641.

  Try to install 4 ' important'updates on Windows Vista and get error codes: 80070641, who has had a lot of answers posted but none does not seem to work and I tried to install this upgrade for the last 6 months! (I did one where you made sure something is running in the Control Panel, but it works just not - I HATE Vista!)

  Now just got a new error code: 6 to 8.

  The updates, I can't update (!) are:

  1. SQL Server 2005 Express Edition Service Pack 4
  2. Update of security for MSOffice 2007 System
  3. Update for MS 2007 Office system
  4. Update for MSOffice Outlook 2007 Junk email filter

  Unfortunately I'm not technically proficient at all and do not understand the jargon I've read on this site so if anyone has an answer, please could you write it as if you were talking to your grandma who only discovered what a mouse!  ;-)

  Thanks in advance

  Sharon

  original title: error codes: 6-8 and 80070641

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

   

  or please repost your question in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Update for Windows Vista (KB2491683) security error code: 8009310-B

  For months, I have not been able to install the update for Windows Vista (KB2491683) security.  I get the following error code: 8009310B.  What can I do?

  Maybe this might help you:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/error-code-8009310b-with-security-update-for/1d0d66ff-f382-4de7-911b-aabb267f99f3

  It's the new KB but same error and cobaltgrey found the solution.

  LC