HP Envy 120 series: printers

Similar Questions

• Scanner model HP Envy 120 series wireless

  I have a HP Envy 120 series printer / scanner, wireless. I can print and scan with all my software except when I go to my bank site to deposit a check, it does not recognize my scanner. What can I do to solve this problem. I downloaded the last Java which would recommend the Bank still does not work

  Hi mij1,

  I understand that you have a 120 Envy that works very well with the HP software, but does not seem to be recognized by the software/site of your bank. I will certainly do my best to help you!

  Because the printer works with the HP software we know that is not the printer itself that does not work, but there is something maybe on the Bank's Web site does not properly. I suggest that you try another web browser (if you are using Internet Explorer, try Firefox or Chrome), make sure that all of your Windows updates are completed (if you use Windows), make sure firmware is up to date of the printer and if all else fails try to install the printer through the USB port as opposed to the radio.

  If the printer is not always recognized after these steps, you will need to contact the support of your bank to see what their Web site.

  Hope this helps, have a nice day!

• HP Envy 110 Series printers and I tried several times to reprint documents m in different qualities and align the cartridges, but the lines of words have dragged through them

  I have a HP Envy 110 series printers and I tried several times to reprint documents m in different qualities and align the cartridges, but the lines of words have dragged through them and are not clear. Much of the document is blurry and cut through. Any suggestions?

  Read this article, he describes some steps on how to use the printer utility that came with the printer to run a few steps that might improve the print quality, including cleaning the print cartridge and other procedures.

• HP Envy 4500 series: printers has been removed

  Help, please! I accidentally reset my settings to the printer when you try to restart my printer because it was frozen. I tried to reinstall the printer several times but failed. When I'm in the printers option in my settings, I tried clicking on the button "+" to add my printer, but have been unable to get it to connect. It is completely wireless and I can not get the printer to appear in any screen. When I got to my printer a few months ago, my computer basically put it all for me. No cables needed. I desperately need help my printer because I am a graduate student and need to print almost every day. Any help would be wonderful I've exhausted all possible ideas I have.

  Thank you!

  Hello @kkall,

  Welcome to the Forums of HP Support!
  
  I would like to help you today with the addition of your wireless HP ENVY 4500 e-all-in-one printer on your computer Mac OS X 10.10. I understand that everything has started when you accidentally reset your printer settings. Therefore, I will start by ensuring that your printer is always connected wireless. Once we determine if the printer is on the network and 'talk' wireless with your Mac, you should be able to (+) add your printer back in. Please follow the steps below.

  Step 1: Check of connectivity:

  1. On your printer, down arrow until see you Wireless
  2. Select OK in the wireless
  3. Select Wireless details and click OK
  4. Make a note of the IP address that appears
  5. On your Mac, open your internet browser
  6. In the address bar type the IP (omit for www.)
  7. Search this site
  • Opens a Web site for your printer: If means that your printer and your computer "speak" wireless. Please proceed to step 4 below.
  • If a Web site for your printer does not open: This means that your printer and your computer communicate wirelessly. This would result in your Mac not to 'see' the printer (+) Add again. In addition, If none displays IP address on the printer, which means that the printer is is more connected to your wireless network. Please follow the steps below.

  Step 2: Run the Setup wireless Assistant:

  1. On the front panel of your printer, down arrow for the Wireless option
  2. Click OK
  3. Select the wireless configuration wizard , and then click OK
  4. When you are prompted to choose your network name SSID
  5. Fill in your password (key) wireless. It is case sensitive.
  6. Once the wireless is connected successfully, check the IP address of the printer
  7. Now, on your Mac take the IP address and enter it in the address bar of your internet browser
  8. Search this site
  • If the Web site for your printer opens: The printer and the computer are now 'talk' wireless. Please proceed to step 4 below.
  • If the Web site for your printer does not open: The printer and the computer are not 'talk' wireless. Please proceed to the next step.

  Step 3: Powercycle network:

  1. Start by unplugging the power cable to your router
  2. Once your router is unplugged, turn your printer off
  3. Then, shut down your computer
  4. After 30 seconds to 1 minute, reconnect your router back in
  5. Then, turn on your printer
  6. Turn on the computer

  After a few minutes the internet connection will be back. On your computer to access a few sites test Web to verify that the internet is running correctly. Once the internet works again check again the IP address of your printer. Try to open the site on your Mac printers again using the printers IP address.

  Once you are able to open to the site of printers successfully, proceed to the next step.

  Step 4: Add your printer:

  1. click on the menu of Apple , then Preferences System.

  2. click on Print & Scan

  3. click on the plus sign , click Add a printer or a Scanner, click the name of your printer

  4. click on the area of use or with the help of Print and then select the name of your printer on the shortcut menu. Ensure that the driver HP Envy is.

  

  5. click Add to add the printer to the list.

  -Source

  Now that your printer is added, please try printing again.

  Please reply to this message with the result of your troubleshooting. Good luck!

• HP Envy 120 series: AirPrint printer not found?

  When printing from iPad/iPhone I get the message 'no AirPrint printer found. '  Uninstalled and reinstalled the printer software and run configurtion HP Network report.  Wireless and network connection is fine.  Hello status is "disabled".  How can I activate?  Thank you in advance for your help.

  Yes at the update of the OS.  Reset do not take care of the problem.  Contact HP technical support.  Could not resolve the problem and replaced the printer.

• printers HP envy 120 all-in-one series

  I recently bought a hp envy 120 all in one printer and when I unpacked and took a look at the cover glass, there was what appears to be a filament in the middle of the cover glass. I tried to find pictures of the cover line, but not conclusions real photos that show this kind of detail or not, that's the way it should be. I have not tried to implement.

  Hello MbbGirl-

  I have a 120 in my office. I took these pictures to show you what she should look like:

  

  I tried to get more pictures, but could not. The cover glass on mine is clear.

  I hope this helps.

  Can you send me a picture?

• HP Pavilion 500 series pc: • HP - printers - HP ENVY 4520 series - error 0 x 80240017

  Members HI Hp reset recently I had to have my desktop so I could get back in and get back into the office.  When I got my desktop back I went into the settings and the system and discovered that my desktop computer was not on the construction lasted 10 Windows so I re downloaded the tool of reastion media and downloaded and installed the Witch of the construction lasted is 1511.  Then I also reinstalled my Hp Printer using the installation cd of the printer following hp without errors or problems at all.  What I have a problem with, it's that Windows update has the same printing hp for the hp printer software but the problem is that windows update cannot download and install the Hp printing software following car and error keeps the details below:

  • HP - printers - HP ENVY 4520 series - error 0 x 80240017

  I'm under 10 Windows Home Edition.

  I was wondering is their someway to hide this update in windows update Windows 10 feel free to explain.  I should also mention that I'm not comfortable to do stuff in the registry.

  Thank you.

  Hi @funny35,

  I'm glad to hear that you were able to find a solution to the issue of the update.

  Please click the "accept as Solution" and the "thumbs up" button up on top of my first response above and other similar issues may find the easiest solution.

• HP Envy 120 no scan no option on Yosemite

  Try to get a replacement HP Envy 120 configured with Mac OS Yosemite 10.10.   Before installing the version of the software from the HP site, I had a visible scanning tab in the preferences for the previous printer system.

  After installation of the version on the HP site for 10.10, then add the printer in system preferences, the scanning tab no longer appears.  Neither the scanner appears in the Image Capture or preview.  When I try to use the HP Scan application, it is the "before scanning" for a while, then generates an error: "HP Envy series 120 - Airprint is currently unavailable.  Please check if it is turned on and connected or try again later. »

  The printer is on and connected to the network.  I am able to print to it.

  Any advice?

  Thank you

  Tom

  Hello @twynne,

  Welcome to the Forums of HP Support! I understand that since the addition of your HP Envy 120 to your Mac running Yosemite 10.10 in operating system you is no longer gives the sweeping opions. I would like you to go ahead and follow the steps below:

  Scrub / uninstall

  • Open the Applications folder > folder HP or Hewlett Packard > Uninstall HP
  • Click continue, click on one of the printers in the list.
  • * Only perform this step if you have not all other HP printers. Hold down the command, Option , and command, while now the three buttons.
  • Click on Uninstall.

  Reset the printing system

  1. click on the Apple icon ( ), then click on System Preferences.

  2. in the hardware section, click Print & Fax/scanning. The Print & Fax/scanning dialog box opens.

  3. make a right click (or Ctrl + click) in the left panel and then click on reset printing system...

  4. click on OK to confirm the reset.

  5 type the name and the correct password.

  6. click OK to reset the printing system. The Print & Fax dialog box shows any selected printer

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol...

  Repair disk permissions

  1. on the Dock, click Applications, then utilities.

  2. double-click click disk utility.

  3. highlight your hard drive / partition on the left (by default this is "Macintosh HD").

  4. click on the button to repair disk permissions at the bottom of the window.

  5. once the repair is complete, restart the computer.

  Restart the printer. Now you can download and install the printer software and install it. Click on the link below to start the download and follow the instructions on the screen:

  Drivers and software HP ENVY 120 e-all-in-one printer full of features

  I hope this helps, please let me know the result!

  Thank you

• HP Envy 120: HP Envy 120 work removes

  I have a printer HP Envy 120 - there is a print job in the queue that will delete not (even if the status shows deleting) and nothing that I send now will print.  I restarted computer and printer, but nothing works.

  Hello

  Try the following print and scan doctor by selecting the difficulty of printing:

  http://support.HP.com/us-en/document/c03286146

  If this does not help, turn off the printer and restart your PC.

  Once your PC restarts open devices and printers and ensure that documents have been deleted or delete them now, the printer icon should go away because it has been deleted.

  Click the HP Envy 120, select Connect a new printer and follow the instructions on the screen. for a network connection, you can turn on the printer for USB connection only activate while the installation will guide you to connect the USB port.

  Shlomi

• my HP Envy 120 wireless printer will not print from my ipad.

  My series Envy 120 (E39A3C) is no longer printing from my ipad. The day I install it, it does print, but since that time will not. As far as I know that I have not changed anything.

  It prints perfectly fine from my PC and laptop.

  I took all the advice (I think) on the site to help HP, like switching off and on again, uninstall and then install again. Nothing has made any difference.

  I think I did!
  I missed the instructions at the bottom of the page to set up the Important printer I need to send an email to the email address of my printer. I did it now, and it seems to be able to print from my iPad on request.

  I followed your advice to the letter, but without success. But I am extremely grateful for taking so much time and thought to help me. I felt that you were willing to continue to work with him until the solution has been found.

  Thanks a lot, a lot.
  Hilsocks

• HP Envy 120: Does not print to iPad or iPhone.

  Fortunately I've been printing from my iPhone and iPad for the last 6 months. All of a sudden today, I am unable to do so. When I get to 'select printer' on the options of the printer, I get a message saying "no printer found AirPrint. I turned the printer market. I unplugged and reconnect to the WiFi devices and printers. It is usually so straight forward, I want to just print an e-mail! Please help me solve this problem. Thank you.

  Hey @Mossy284,

  Welcome to the Forum from HP Support.

  I see that you are unable to print via AirPrint with your ENVY 120 HP e-all-in-one printer.  I would like to help.

  You have confirmed that your printer is connected to your wireless network?  Note that AirPrint will not work if for example your printer connected to a network of comments and the iPhone or the iPad is connected to your main network.  Button on the front panel of the printer the wireless icon and make sure that it is connected and displays an IP address.  If this isn't the case, run the Wireless Setup Wizard to restore connectivity.  If you are connected, but find that AirPrint works always do not, powercycle your equipment as explained below:

• Broken Envy 120 printer

  Purchase a printer Envy 120 in December 2012. In November 2013, received an error message saying that the cartridges were damaged, so I could not print.  After that 2 long guaranteed scripted calls to technical support, a refurbished printer was sent in December of 2013.  In April 2014, the refurished printer scanner has stopped working (tried the hard reset); and last week, I started getting a blue C4EBA649 error.  The printer is frozen and will not work despite unplugging and resetting my router.

  The refurbished printer didn't work for 120 days. Given to nine printers are only a 90 warranty.  In addition, when I checked on my warranty to April status, date of the guarantee of the refurbished printer has never updated - which expires in July 2013. Very unhappy.

  I am so so glad you were able to get your printer replaced!

  If please consider tagging from my previous post as a "accept as Solution" so that others in the community sees that call phone support is encouraged and can be a positive experience.

  Thank you, good impression.

• HP ENVY 120 - PRINT BACK TO FRONT

  Greetings!

  I found the back draw forward for other printers, but not for the all-in-One HP ENVY 120. I went through all the menus for my printer, but I can't find it yet. I'm sure that there is a way to do it, but I'm going to be hacked if I can understand it.

  I'm sure some of you guys know how.

  Diolch!

  Gwaredd

  Cymru am byth!

  You can print in a program or the printer itself? As a general rule, rear printing forward is a setting in the print options of the program that you use on your computer.

  -Spencer

• HP Envy 120 all-in-one: name and password on the server integrated HP Web Page

  I have a HP Envy 120. I try to connect to the HP Envy 120 page which I think is either associated with HP Connect or the integrated Web server. The page displays the tabs Scan/Home/Web Services/Network/Tools/Settings. I'm trying to change the settings for scanning this page, but the security system asks to connect you. I don't remember putting in place of a name or a password, if I can find a password on the printer itself.  Even if it's the password to use it always leaves me with the question of the name.

  Can someone please advise?

  Thank you

  Thanks for providing this information in the @morrig47PM.

  Web services must be enabled to be able to scan to E-mail from the integrated Web server with this model. Here is a document with more information: how Scan: from the control panel.

  Given that the reset of the printer is not clear out it Admin password for the built-in Web server, which would indicate a hardware problem with the printer.

  I'd run the scan to Email on the right of the control panel of the printer. It is more convenient to use the option analysis of the Web.

  Press Menu scanning.

  Messaging.

  If the printer is still under warranty, call to inquire about a replacement unit. You can contact the HP Customer Service.

  Thank you!

• All-in-one HP Envy 120: HP ePrint E-mail

  I hope someone can help me with my problem.

  I created an account of HP ePrint for my all-in-one HP Envy 120 printer and then changed the address of e-mail to something which I could easily remember.  So far so good.  However, as this printer could not copy or scan, I replaced it with another printer with the same details of the model.

  Then, I went on my HP ePrint account and deleted my original details of ist printer (as he has been appearing as offline and not connected) and added my new printer via the tab to add devices.

  The problem is, I want now to change this e-mail to my original email (easy to remember) address address but when I click on the option change Email, it is grayed out and cannot be changed.

  Can someone help me with what I want not a random email address

  Concerning

  Hello

  A specific ePrint address cannot be assigned to different devices... Your previous address can not be used on your new printer.

  You will need to select an email address unique for your new printer - sorry.