HP Envy 14 Display goes black

Similar Questions

• Satellite 1000-Z2 - the display goes black

  I have the laptop above, and it has a display problem

  Minutes from the laptop being powered, the display goes black.
  This effects both display own laptop computers and monitors connected to the outside.
  With the help of the fn to change the screens/Lighten/Darken has no effect.

  at the present time, the display comes up just long enough for windows to start, but it was during longer before

  any ideas would be appreciated, thanks

  [Edited by: admin on 21 January 06 16:03]

  Hi Alex,

  It seems that if the FL inverter fails on your laptop. It is a small circuit board that proveds backlight works for your screen.

  Willneed refer to an authorized Service partner to get this replaced.

  Kind regards

• Satellite L850D-117 - display goes black every 10 Sek playing online games

  Hey, Im German so excuse my bad English.

  I have a Satellite L850D-117

  With this 2 grafik card trick.

  When I play designated games that the screen goes black as ever for 10 seconds and then every 5 seconds and then every 3 seconds it is not established when the screen goes black, sometimes never second and sometimes every minute... There's plack for like 1 sec

  I just instaled new display on the Site of Toshiba drivers, but it won't work...
  and I instaled drivers graphic AMD on Amd website

  No idea how to solve this problem?

  Its very frustrating when I play online games and I have this problem...

  Have you noticed that ONLY play games (browser games) online or have you noticed this also to the help of other programs and utilities?

  Have you tested different browsers like Chrome, Opera or Firefox?

• MacBook Pro - display goes black

  I have a Macbook Pro 1 year.  At the start, everything seems normal. I put my password, the desktop appears briefly, and then it goes black.  It works fine on account of "safari only" invited.

  Any thoughts on the difficulty or trouble shoot?

  Thank you

  Stuart

  Try to run a secure boot by holding the SHIFT key during startup. The problem happens it so?

• Latitude E7440 display goes black / white after "starting Windows."

  I suspect that he is an out-of-the-box issue (like the power button lights, either), but maybe I'm missing something... This particular unit fired upward, as planned and took our standard image. Somewhere along the way (probably during one of its reboots), I noticed that the screen is out. Turn down and the back didn't solve it, or don't have reset the BIOS. Dell diags run without problem and I can start Windows in Mode safe... but whenever I start Windows normally, it removes after "Starting Windows" flashes by.

  AARRGGHH! I'm kicking myself. It was something I discovered some time ago and since then I forgot... I had stacked them! I have closed an E7440, placed another on top of it and proceeded to the image of this second unit. At some point, I must have changed it so slightly... put it right above all that the devil is in the cover of the display of the unit of the first! (A magnetic field, is my guess). And "in white" is the second display unit... hit the light of the power button, and as a bonus. It worked as planned, when I moved this unit to another place, in order to tap into a flat HDMI. And it is blanked, as soon as I put back it on top of the first E7440. Mystery solved.

• ACER Aspire Z3 - 715 Display Driver stops and Gets or window goes black

  Bought new June 2016 Acer all in one (non-touch). Display driver Windows 10 ceases to function and retrieves and or the screen goes black and I have to stop. Bought the system nine June 4, 2016. Help.

  What VGA driver on your system crash?

  Intel or nVidia?

  If it's Intel, try this:

  key of the Windows logo + x

  Device Manager

  Click view adater

  Right-click on the Intel graphics card

  choose to unisntall and check the box to uninstall the software too

  reboot and then let the update of window install new drivers

• Computer laptop screen goes black when the VGA cable is connected, but you press TV poster display correctly when the VGA button on the remote control.

  Computer laptop screen goes black when the VGA cable is connected, but you press TV poster display correctly when the VGA button on the remote control.   I need the laptop screen too.  It started just after years of correct use.

  Original title: VGA:

  In Panel > all items in the control panel > display > screen resolution you should be able to see the two devices / displays and be able to set options...

  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

• On Windows 7, the screen flashes and goes black. It shows that the display driver has stopped working

  I have premium home edition of windows 7 I had a problem with my display driver. The screen flashes and goes black and then turns back on with a message in the bottom right of the screen that reads «display driver stopped responding, but recovered» It has also closed and restarted windows

  Hello

  First, download and install the drivers from the ATI site, if you have already done so, check the graphics card and cabin temperature by opening. This normally occurs when the temperature is too high. Or if a person has overclocked graphics card.

  Thank you

  Nitin Aswani

• Computer laptop HP dv8t-1100, the display lights for thiry seconds about then goes black.

  I have a laptop HP dv8t-1100, the screen lights for thiry seconds approximately and then goes black, I can close the screen and quickly open it up and the screen comes back on?  This is my wife's computer and its in this perpetual loop.  Installed 2nd monitor and it works perfectly, never turns off (unless I turn it off).  I really hope you can help.

  Hello

  1. can you try updating the graphics driver to the latest version?

  For your machine, it is SP51290.

  FTP://ftp.HP.com/pub/SoftPaq/sp51001-51500/sp51290.exe

  2. can you try updating the bios to the latest version?

  For your machine, it is SP49106.
      http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-84660-1&cc=us&DLC=en&LC=en&OS=4063&product=4121367&sw_lang=

• Satellite U920T - the screen goes black when you drag the keyboard

  This morning, I turned on my U920T-10 days but the screen remained black.

  At first, I thought the screen was broken, but in mode 'Tablet', the screen became. Now when I slide the keyboard the screen goes black again.

  How can this problem be solved?

  Hello

  For me, it looks like a bad connection somewhere between the screen and the motherboard.
  This could be possible reason for failure to display while sliding in and out.

  I guess this can be resolved easily and I think that it is a job for a technician (authorized service provider). I recommend you contact the service technician in your country to get the laptop fixed. I hope that the warranty is still valid in order to repair for free.

  I hope that this can be corrected. I keep fingers crossed.

• Spectrum x 360: screen goes black randomly when on battery and some energy-saving options enabled

  Hello everyone,

  I bought this fantastic machine called spectrum x 360 and I love it.

  Unfortunately since the early days I'm facing what I think it's a problem of driver/software (not the related material).

  This problem only occurs when I'm on Windows, not in the bios or at the startup. JUST IN Windows envinroment, especially after the login, and when the computer was turned off. Sometimes when I use it after a while, randomly.
  This occurs only when the spectrum is on battery. The problem does not appear on AC adapter.

  Problem: the screen goes black randomly for a few seconds and then reappear, sometimes the entire image on the right slide and there is a part that looks like yellow and corrupt, then goes black and reappears.

  Windows Version: I'm on Windows Home 64 bit, build 14393.321 10 (update of the anniversary).

  The entire screen works fine for normal operations, no artifacts.

  Replication of the problem
  Initially, I was able to reproduce the problem with the driver build 4360 (which is the version of the driver from the HP site). Whenever I loaded the home page of youtube and the banner has started playing on the screen went black sistematicly.
  Then I updated the GPU driver through the Device Manager, which has improved my GPU driver to 21.20.16.4494, as of July 25, 2016 and the problem happens much more rarely.
  Now I am facing this problem again but Edge works correctly and is not the cause of the problem, it can appear even when I don't do anything with the PC.

  I noticed this problem appears when saving options are enabled for the Intel GPU (I'm trying to translate this to English because the GPU driver Panel is in Italian):
  
  -update panel houses;
  -advanced mode; energy saving
  
  If I disable these options, the problem does not appear or, better, for I've tested so far, he could not displayed when options are not in market, but I have not tested this very long to be sure.
  
  In my opinion, there is a bug in the display driver, or some customizations made by HP causes problems with the driver.
  The rest of the computer works correctly.
  Any idea to solve this problem? Or should I keep these options turned off power saving?

  Hi, thanks for your help.

  I have a passion for COMPUTING and ex-computer SCIENTIST, I am familiar in surveys on hardware/software questions and hope that this post will help some users get rid of this problem.
  Black screens and screen corruption has been issued by the option called "auto refresh Panel" energy saving.
  I did a lot of hours on battery (condition where this pop ups problem) in these days and the problem didn't show when it was turned off.
  To verify that I tried to activate "Panel options self-identity" in certain occasions and, at random, on the first boot of the machine (after being turned off) the problem arises again.
  It certainly is a problem with this energy-saving option.
  Now everything works fine.
  If the problem appears again, I will post more information.
  Thank you for your support.
  
  I think it would be useful to stick this post on top in this section of the forum, to be useful to other users and being more visible.

• Satellite C660-1J2 - the screen goes black for a second

  Hey everybody.

  I recently changed my HARD drive and did a reinstall fresh, as previous was damaged. What is happening now is that whenever I have connect or disconnect the cable the screen goes black for a second. There is no real consequence of this, I'd rather just if there was an option to make it happen.

  Then, give a shout someone if you know how to deal with this.

  Hello

  > I have recently changed my HARD drive and did a reinstall of fees
  You have installed Windows from Toshiba normal Microsoft Windows disk or recovery disk?

  To me it sounds like that, you forgot to install the display driver. Also check the Manager of devices for the yellow exclamation points or unknown devices.
  Make sure that correct display driver is installed. You can download the latest version of Toshiba's official website:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Check this box!

• Satego P100 - the screen goes black

  Hello

  If I turn on my laptop there is no problem. After maybe 5 minutes, the screen goes black and after a few minutes, he just a blue screen. Restarting the laptop. But now I don't have lines on the screen for the display of the BIOS and the power of Windows screen but during the operation. If the laptop is turned on after minutes the same, it goes black and then blue screen.

  BIOS and reinstalled system. nothing happens. I think that BIOS is flawed, because there are lines on the screen when I turn on the laptop again.
  If I leave the laptop for 15 minutes off the coast, it starts normally but aftern maybe 5 minutes it starts again with blue screen and other funny stuff.

  Now - what is someone the problem and a solution?
  I think the BIOS is a virus that destroyed. But I think that on a laptop, it is not possible to change only the BIOS. Because the update of it was ok but the problem remains.

  Thx for the answers and cordially

  I put t think the BIOS is defective. There must be another problem. All that you have done is just. Update the BIOS and the clean OS install are only option that you can do about it.

  Please contact the nearest authorized maintainer and let the technician to check your laptop. Let them to test the operation of the equipment using the service tools.

• Re: Satellite L500-19 X - screen keeps going black

  Hello

  I have a Toshiba Satellite L500 - 19 X and continues to go to the black screen.

  When you start the computer it flashes briefly until start / Boot screen properly before going black right now. Sometimes, the image is displayed correctly for 3 or 4 minutes before also black.

  If you hold down / tilt the screen under a strong light you can see a preview of the ghost of what should be displayed and if you connect an external monitor to the external monitor works fine and you can see a black ghost of what is on the external monitor on the laptop screen.

  I tried to reinstall the drivers, but it had no effect.

  Do you think I should replace the screen inverter Board or just reconnect the connectors screen?

  Thank you very much for your advice.
  Concerning

  Al

  Hello

  First to solve this problem, you must disassemble the laptop.
  I put t know exactly the procedure step by step for the L500 series but this procedure isn't very easy disassembly and you could damage other parts.

  Back to the question.
  It seems that the graphics card is OK and the problem is with lighting.
  Satellite L500 was equipped with a FL inverter Board and LCD joint (no backlight).
  The FL inverter controls the level of backlight screen s and I think that in your case, this part is defective.
  To resolve this problem, he needed to remove and replace the s FL inverter.

• Satellite L405D-11V - freezes and the screen goes black when you watch the video

  OK, so I have the Toshiba Satellite L405D-11V, I had a breakdown, basically, the computer freezes at any time and the screen would go black, with the fan and lights still ongoing, this could be at the start, or a few hours using the laptop, so I decided to ring Toshiba technology support and they arranged for my laptop to collect and be expelled for repairs.

  I was able to track repairs online via the tracking service and was able to see what they were doing to my laptop, he said that they have ordered a part, it was underway and the repairs are completed.

  However, I got the laptop back today, I turn it on, all right, I start using the cell phone that everything is fine, so I decide to watch a video on youtube, and it freezes again, so I turned off now pressed the power button, hoping he wasn't that a large, I turn back to and load the video once again it freezes and the screen goes black again, after that whenever I am watching a video or a game, it causes the computer to crash and freeze as before the repairs. So there is always a mistake, but I'm not sure what to do

  Its still under warranty, I bought the laptop from the Comet, but I really don't want to send the laptop for repairs again and find it comes back with the same fault, is it interesting sending distributed, maybe see if the comet will replace the laptop as its still less than a year to buy the laptop, or it'll just be useful to save all the hassle and buy a new laptop? If this fault happened to someone else, I could use you some help, and if someone could shed some light regarding what could be bad?

  Thank you

  Hey Buddy,

  You changed something on the configuration after you got your notebook back from repair? You update a driver, or something else?
  What operating system you use on your L405D satellite?

  To be honest it is really hard to say why it happens because technicians test to check if your laptop is running correctly.

  In my opinion you should try to update the display driver. Maybe it's the origin of the problem of s
  If this isn't the case, I recommend installing Windows from Toshiba Recovery disk to restore to factory settings. These parameters are pre-tested by Toshiba and should work.

  If you still have the problem, you must contact the technicians again. I mean you could track the online repair and according to your assignment, everything worked well during repair, so in my opinion he should t be a problem to contact guys exactly.
  Explain your very detailed problem. I think that everything can be clarified then. :)