HP ENVY 15-ae109na: upgrade for HP ENVY 15-ae109na laptop computer Ram

Similar Questions

• HP ENVY 15-j140na laptop: HP ENVY 15-j140na laptop computer have mSata socket?

  Hello!

  I just bought a HP ENVY 15-j140na laptop. There mSata socket? Because later I would add an SSD if possible?

  The laptop: http://store.hp.com/UKStore/Merch/Product.aspx?id=J0B97EA&opt=ABU&sel=PCNB

  Thank you very much for your help!

  Hello

  Please consult the following list:

  http://www.mydigitaldiscount.com/mSATA-SSD-Compatability-list.html

  Kind regards.

• ENVY of HP dv6-7307tx: replacement of the HP ENVY dv6-7307tx laptop computer screen.

  My HP ENVY dv6-7307tx laptop screen must be replaced because it has 3 vertical lines on the left side of the screen.

  I need to know, what I'll be able to fix a screen full hd 1080 p instead of 720 p hd screen. I think its possible because both screens the 40pin connector.

  I found a screen full hd with a connector 40pin here is the link (http://www.laptopscreen.com/English/model/HP-Compaq/ENVY~DV6-7202EG/)

  And here's the 720 p screen which entered the laptop (http://www.laptopscreen.com/English/model/HP-Compaq/ENVY~DV6-7307TX/)

  Please let know me if what im trying to do is possible or not.

  Hello @Kandekumbura,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you are looking to replace your screen and tried to help you!

  Please see the following guide to find all the compatible screens for your device:

  HP ENVY dv6 Notebook PC Maintenance and Service of Guide (Chapter 4, Page 95).

  Please let me know if this information has been helpful by clicking the thumbs up below.

  Have a great day!

• Replace drive HARD system with Samsung EVO SSD 1 TB of HP ENVY 17 - j005tx laptop computer

  Hi all

  Wanting just a few tips on how to migrate and replace the system drive without having to reinstall everything again.

  The Migration of Samsung tool work?  When I check my HDD in the laptop there 5 partitions...

  The HARD drive, I would like to replace a the following Partitions:

  400 MB (Recover Parition)

  260MO (EFI Partition)

  904 GB (drive c :) - NTFS)

  350 MB (recover Partition)

  25.5 GB (drive D: Recover - NTFS drive)

  According to the Samsung User Guide data Migration tool, he mentions the following:

  http://www.Samsung.com/us/support/owners/product/MZ-7TE1T0BW

  6 recovery OEM partitions, at the plant by computer makers, cannot be replicated. However, if the PC is manufactured by Samsung and SRS (Samsung Recovery Solution) 5 or 6 is installed, the recovery partition is automatically cloned. (Not supported in versions prior to SRS 5)

  How can I migrate all recovery OEM as well as partitions C: and D: partitions?

  Thanks in advance

  Jim

  Laptop HP ENVY 17-j005tx, HP ENVY 27 - k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server tilt, HP MediaVault 2020, HP ENVY 120 AiO Printer

  If you burn the recovery DVD, you don't need the recovery partition... they hold the same data. I try the clone on the new drive and see if it works. If it isn't then you still have the original drive and nothing has been lost. Reported problems with the migration of Samsung software. Personally, I use Acronis True Image Home for cloning, and it is not.

• The best upgrade for a HP g7-1150us laptop ddr3 memory? b

  I recently got a HP laptop g7-1150us with 4 GB of ram.  I intend to upgrade the ram by adding another module of ram of 4 GB.  What is the best?  What is the laptop double channel capable?  I can't find anywhere what ram of 4 GB module comes stock?

  Experience of entry would be welcome... Thank you.

  This model has only 2 memory slots, has most likely 2x2gb modules installed and yes it is dual channel.

  It uses ram DDR3 10600 (1333 mhz)

  I would buy a 8 GB kit (2x4gb modules) this is the maximum memory that can be installed in your model

  I tend to buy the memory of mark which is on sale at Fry's electronics, I look at the ads for sales, but I have a shop near by, you can not.

  http://frys.com/ads

  .

  Last mark I bought for this type of memory was g.Skill, works very well in both my HP laptops, looks like Newegg has a good price on it and free shipping.

  http://www.Newegg.com/product/product.aspx?item=N82E16820231295

  .

• Pavilion dv6 3116 do you: upgrade for my pavilion dv6 3116 do you Ram

  I think the RAM (4GB) upgrade on my Pavilion dv6 3116 do you, help me to choose the one which.

  Currently, I have these two:

  

  It's the HP part number:

  Memory module (DDR3 PC3 - 10600 1333 MHz) - 4096 MB 599092-001

  It works:

  http://www.eBay.in/ITM/GSKILL-4GB-DDR3-1333MHZ-laptop-F3-10666CL9S-4GBSQ-/121447013278?hash=item1c46ce5b9e

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• How to enable the AHCI for SSD on M6-1010TX laptop computer HP

  HELO

  Have tried to install an EVO of 840 Samsung 240 GB SSD on my laptop of M6-1010TX with WIN7x64 i5/4 GB and running.

  The SSD seems to work OK, but I when I run Samsung magician this is a warning that it must be set to AHCI.

  Also, most of the menu items are grayed out and unavailable in Wizard, so I can't see or adjust all parameters. I don't even know if the TRIM work.

  There is no possibility of setting to AHCI in the BIOS. (In fact there is no provision for seting pretty much anything in the BIOS)

  I've seen a remedy to a similar problem on this forum under 'How to enable AHCI for HP ENVY TouchSmart m6-k015dx Sleekbook' which offers to upgrade to the latest version of Intel RST, which is supposed to give favor SSD attitude to go with the 7 series Intel chipset.

  I already have the updated HP version of installed RST (2012-05-04 11.1.0.1006), but the Intel site has versions up to 13.1.0.1058 in date 27-05-2014.

  Anyone know if these later versions of Intel are safe to install?

  PS - I 840 Samsung SSD EVO running on 2 HP ProBooks's a little older, and they run like lightning.

  A simple setting in the BIOS to enable the AHCI is available on these. Why not in the new M6?

  Thank you

  OK Hüffer---> we have a update

  I had the opportunity to re - install the SSD drive this morning.

  It seems that you were mostly correct, but there is also a bit of a conflict between the Samsung software and HP hardware.

  When I re-installed this time I connected the SSD in USB BEFORE installing the software (Samsung instructions say to connect AFTER insalling software). This has resulted in much better recognition of the SSD and all the options are now available in Sasung magician.

  EXCEPT - 1. He always warns AHCI mode being "Deactivated (IDE or RAID).

  2. it does not recognize the SATA 3 Interface

  HOWEVER - it seems to work quite fantasmagorically FAAAAAAST

  Samsung Benchmark gives random read/write speeds about 30% above their maximum rate quotes

  These reference speeds are about double what I get from the above, 2 HP ProBooks who have SATA 2 interfaces, so it seems that the SATA3 interface actually works correctly.

  I am now very happy with this performance (but I wish that AHCI warnings were not there)

  So the secret seems to be to connect the SSD drive first and do believe not all alerts when the evidence says it actually works OK.

  Thank you once again to Hüffer,

  Hawkeye

• HP laptop, 2000: 2000 HP laptop computer ram Upgrade

  Hello

  I currently plan to upgrade my laptop HP 2000 4 GB ram 8 GB, I have a few questions that I need help.

  1. as my computer already has 4 GB ram ADI need to replace 4 GB of ram with a stick of ram 8 GB or can I buy another stick of 4 GB of ram and use it in the other location?

  2. for a few hours now, I searched for the right stick of ram for my model. This model is 2000-2d63TU.

  However, it turned out to be unsuccessful.  Is there anywhere I can look for the ram for my PC and if so I would like a link.

  3. my computer is an older model HP notebook I bought it 2 years ago now, I'm still able to upgrade or not?

  Thanks a lot for your help!

  Proudy

  Hello, 1) you can add another 4 GB stick in the slot available without problem. (2) can you tell me the model number of your RAM? I will gladly send a link when I find a product. (3) to answer this one, I have recently updated since 2005 xp machine and my hdx16 hp 2008 with more RAM and they both went well. I hope this helps

• Upgrade laptop computer Ram

  I have a hp laptop 1301 tx and I want to know my upgradation ram on the properties I have seen my type of ram is D 1333 ram and I ordered for kingston 2 GB ram which has

  Type of memory: 2 GB (64 x 256 MB) 1333 MHz DDR3 SO-DIMM

  Memory StandardDR3-1333/PC3-10600

  It will work with my laptop?

  Yes, it works perfectly.

  Since you have a 64-bit operating system, you might have installed a 4 GB chip and had 6 GB.

  One day you can install 2 x 4 GB and 8 GB if you want.

  Here is the link to the service manual. Procedures for removal and replacement of memory are in Chapter 4.

  http://h10032.www1.HP.com/CTG/manual/c03094322.PDF

  One thing to note... I have read it is VERY difficult to come down the lower lid, so don't be discouraged.  Read this thread below and click on the related links.

  http://h30434.www3.HP.com/T5/hardware-upgrades-replacements/HP-Pavillion-G6-memory-upgrade-problems/m-p/1374715#M6863

  Good luck and let us know how your upgrade was memory.

  Paul

• Options to upgrade to internal hard drive on laptop computer dv2000t (installation problems)

  I need to replace a failed hard drive in my laptop dv2000t of 2006.  The drive I'm replacing was already a replacement car from the original 80 GB drive came with the laptop.  The first replacement 3 years ago (2008) was a 200 GB drive, which worked well for about 3 years.  But he just crashed (apparently).  I received warnings of imminent failure in 'Smart' car a week before, and then it finally is more start.  Subsequent tests on the extract disk show it as having failed in many sectors.

  I had no problem to order a spare for the first time in 2008, restore a backup image to original disk Acronis, installation, etc.  Everything went well in 2008.   So I assumed that all would be gone smoothly for yet another replacement and upgrade.

  In 2008, the drive I ordered was a W.D. (Western Digital, stick with the same brand as the original) disk SATA 2.5 inch 5400 RPM (200 GB).  It's a SATA (I) (1.5 Gbit/s interface).

  The first disc I ordered recently (March 2011) was a W.D 2.5 inch SATA II (3.0 Gbps interface) 500 GB 7200 RPM (from 'Black Scorpion' line of W.D.).   Got the disc image disc to it and she came to the laptop.  Unfortunately, at the start and after the screen BIOS, all I get is a black screen with a white cursor blinking fast at the top of the screen.  Apparently by car is not recognized by the computer?  Then I did some reading in some online forums and found some references on this laptop is made not with the capacity of disks more or 320 GB with 7200 RPM drives (because they're hotter than 5400 drives).  And finally, references to the SATA interface speed.  I ordered a 2nd drive, W.D "Scorpio Blue" line, this time above a 5400 RPM 320 GB drive (but still SATA II).  Same story, still does not work.  So I decided that maybe the question was the SATA speed.  So I found someone who still had a SATA plus old (1.5 Gbps) W.D. drive in stock.  It's a W.D. SATA 250 GB (no longer manufactured).  It should arrive in a few days - and I hope this one works!

  I would like to get some sort of confirmation on the white flashing cursor on the black screen at startup.  Is this typicalif the system could not find a bootable hard drive?  Also, is this SATA or SATA-II issue a probable cause of my problem?   I'm sure that there is nothing wrong with the new drives themselves and images restored on them, as readers will be installed them and available when I plug them in as external drives on my other computer.

  I was able to solve my hard drive installation problems.  It turns out that there is no problem with any of these new replacement discs, I ordered (thinking I had ordered some readers with the wrong specs).  It was a simple solution to the problem.  Restored readers were not start because there is no MBR (Master Boot Record) on the disks after restoring from disk images.

  I use Acronis True Image Home 2011 as my (backup) disk imaging software.  And I just did not understand how to restore properly backed up images on a new hard drive.  I had done everything right except that I had not checked the box to 'restore the MBR' - both do not understand what it was or what it means.  Once I checked this box and reimagee the new drive, it worked fine.

• HP2000 2b10CA: laptop computer ram upgrade

  bought an old, as the new laptop, factory reset, reinstalled Win 8, updated to Win 8.1, and then win 10.  Original specifications say max 8 GB DDR3 1333 mhz SODIMM.

  2 related issues

  Firstly for the locations of 2 ram card do I have to use 2 x 4 GB, or can I use a 8 GB card in the slot low?

  second... 8 GB is really the max or was - the max just because 4 GB cards were bigger back then?  If she can endure more than how much more?

  Pretty much know my way around computers or the internet to find that the info on my own so any help is very appreceated.

  Thank you

  Oh yeh... laptop is HP 2000-model 2b10CA

  Hello
  
  http://support.HP.com/us-en/document/c03596925
  
  Page 2, 3, 45 46 in this manual: http://h10032.www1.hp.com/ctg/Manual/c03575298
  
  2 slots, taken max supported up to 8 GB with two sticks of 4 GB to the highest possible in each of the limits of motherboard provided 64-bit operating system is installed. Configuration of the RAM, speed, possible brand should be exactly the same to get guaranteed compatibility.
  
  Concerning
  
  Visruth

• HP Envy 15-j109TX Touchsmart computer laptop upgrade help

  Hello, my HP Touchsmart Envy 15 - j109TX laptop computer is shipped with 2 GB DDR3 NVIDIA GeForce GT M 740 graphics. Can I put graphics or higher cards of 4 GB DDR3 NVIDIA GeForce GT M 750 ?

  Also, I want to upgrade the RAM to 16 GB and a 2 TB HARD drive . Is this possible? I don't see any customization option in the HP Shopping Web site. So how can I do? also, thanks for mentioning about cost of upgrade of these.

  Hello
  
  Here are the specifications of product: http://support.hp.com/us-en/document/c04031367
  
  Go through the Page 4 and 5 of the user manual:
  http://h10032.www1.HP.com/CTG/manual/c04091768.PDF
  
  Upgrade options:
  Up to 1.5 TB drive HARD with no hybrid NAND support
  
  Up to 16GB 1600 MHz RAM with boost DDR3L dual channel
  
  Although Nvidia 750 M dedicated 4 GB card is indicate against the graphics options, I think not that this is possible because actually nvidia in this model is not as a card but more a chip which is attached to the motherboard. I think you need to contact HP in your area directly for this.
  
  It will be useful,
  Thank you

• HP ENVY 15-ae178TX laptop: when this laptop from HP ENVY 15-ae178TX computer laptop arrives in Singapore for sale?

  When this laptop from HP ENVY 15 - ae178TX laptop computer comes to Singapore for sale?

  Hello

  Good question. It doesn't happen at all, but you should be able to find a plug similar to Singapore. Normally the HP doesn't sell product even in all countries.

  Kind regards.

• HP ENVY 15-ae103no laptop: want damaged display, yellowish stains

  Hello

  I recently bought my computer, I noticed a spot yellowish on the screen when something dark is displayed. Now, he has started to grow.

  I look like this http://imgur.com/UCCiKPs

  I think it's something that puts pressure on the screen or something. Probably something behind the screen. The tasks also change in size and intensity when I move the screen from different positions.

  I have reproduced my TV screen and the second monitor, and the tasks does not show on them.

  I think it's something that should under warranty? Or maybe it's something that can be fixed in a local shop?

  Sorry for my bad English

  Hi @CasperKarlsson,

  Thank you for visiting the Forums HP's Support and welcome.

  I looked in your question on your HP ENVY 15-j171nr laptop computer and a yellow spot. Thank you for detailed information about what you have discovered. Please call us http://ow.ly/Xa6p5 they will be happy to help you immediately.

  If you need more assistance let me know and I will gladly do whatever I can to help.

  Please let me know if this information helps you solve the problem by marking this post as accept as Solution, this will help others easily find the information they seek.

  Thank you.

• HP ENVY 17-N078CA laptop: seeking the machine with windows 8.1 - and the upgrade to 10.

  Hi all

  I am looking at buying a machine to re-furb.

  HP ENVY 17-N078CA laptop

  The machine has windows 8.1 and I wanted to know if there was problems with upgrade to windows 10.

  edillard

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post about upgrading your PC to Win10 and wanted to help.

  While HP has not tested your PC with Win10 and has not certified it will work, the good news is that HP does not provide drivers for your PC Win10: http://support.hp.com/us-en/drivers/selfservice/hp-envy-17-n000-notebook-pc-touch/7777355/model/8429748#Z7_3054ICK0K8UDA0AQC11TA930O2

  If this page does not display the windows 10 when you open it, then click Edit and select Windows 10 in the menu drop-down.

  Unfortunately, the Win10 GoBack function is NOT reliable, and that can leave you with a corrupt machine that will require the factory reset and lose all that on it, to get it working again.
  
  You can avoid this by making an image backup to an external hard drive or a USB drive using Macrium reflect (MR), which provides a FREE version that can be used to image and restore partitions or drives together.
  
  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key
  
  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.

  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.