HP Envy 15-j004sa TS: touchscreen

I just replaced my digitizer front glass due to it being cracked.  It does not work.  There is no driver in the Human Interface devices and in the BIOS there is no test of component touch.  The new screen would be faluty but why is there no drivers etc?

Hello

It's a touchscreen of duff.  Replacement screen and everything was ok.

Thanks for your help.

Tags: Notebooks

Similar Questions

  • TouchSmart HP ENVY 15-j004sa: using a Quad HD monitor with laptop

    Hello

    Can I use my computer laptop 15-j004sa TouchSmart from HP ENVY with a Quad HD (e.g. screen HP ENVY 32 inch Media) monitor and get the full resolution?

    Thank you

    Ian

    Hi @illusio ,

    Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question about your TouchSmart from HP ENVY 15 - j004sa Notebook and concerns with a Quad HD connection to the laptop monitor. Here is a link to page 7 of your manual for HDMI v1.4 support up to 1920 × 1080 @ 60 Hz.

    Hope that answers your concerns.

    Thank you.

  • HP envy 15 t-ae100: touchscreen driver

    I wonder if there is any monitor driver available for the touch screen of my computer laptop hp envy 15 t-ae100.

    I am currently using driver generic PnP monitor with a maximum resolution of 1366 x 768.

    I really need full HD 1920 x 1080, because applications windows becomes too large on this screen size.

    Hello

    Could you send the personalized message for me with the serial number and the product number for me. So that I can which was supplied with your device. Click mahemac, and then you can send details to me. Do not forget these details here.

  • Envy 14-K074CA touchscreen: 10 - touchscreen Windows Envy 14-k074ca

    I have a HP Envy 14-K074CA Sleekbook touchscreen.

    I am currently run ning on Windows 8.1 but want to upgrade to Windows 10.

    Then jeutiliser the ability my computer WIDI laptop a lot and do not want to lose it with this upgrade.

    My question: is there a problem with using WIDI and Windows 10 on this model?

    Or are there other serious issues I would meet with this upgrade?

    Thanks in advance.

    Rudi

    Rundl

    new 10 with Intel drivers windows supports WIDI

    have you found the drivers Windows 10 for the system ?

    My advice, wait until February

  • flashing light hp envy 23-d250

    I have a new HP Envy 23-d250 PC touchscreen. I noticed one night when I woke in the dark there is a bright white light on the side that flashes periodically. There is a photo of three discs next to the flashing light. I see now that it does all the time. No one knows what it is and if it's supposed to be flashing constantly? If there is something that I don't do that I'm supposed to do, I would like to know about it. Thank you.

    According to the information provided, it would be the hard drive activity light and yes it should be flashing periodically.

    If you have any other questions, feel free to ask.

    Please click the White Star of KUDOS to show your appreciation

  • PC HP ENVY 15 x 360: want to downgrade to win 10 to win7

    I have hp envy 15 x 360 touchscreen portable

    It came with windows 8, and then I upgraded to windows 10.

    now, I want to use windows 7

    Can I buy windows 7 dvd in the market.

    My question is if I use windows 7 in this laptop?  This laptop will support and run windows 7?

    Hello

    Thanks for posting in the Forum from HP Support.

    I think you write on this computer > http://store.hp.com/us/en/mdp/Laptops/envy-x360-232003--1

    It's a bit of a and Windows 7 doesn't have the same type of tactile support 8.1 and 10 Windows

    As much as I know Windows 7 is NOT officially supported on these models. Only 10 and/or Windows 8.1 (depending on model).

    These machines have been designed with Windows 8.1/10 in mind.

    Even if you buy the Windows DVD, you will need to use in any external way to install it (via external USB or DVD key).

    To conclude, if you don't like Windows 10, you can return to Windows 8.1 for 30 days after the upgrade.

    You can also reset the machine and return to the original operating system factory.

    What is the reason for which you want to downgrade to Windows 7? Problems?  Please, let me know and I can help.

  • TouchSmart HP Envy 15-j070us display is not touchfunction more

    Hello, if you have a problem with my envy touchsmart 15-j070us touchscreen. There after the update to not win 8.1 no touchfunction more. The devicemanager is only a normal pnp display.

    I can't find driver for the display.

    Can someone help me?

    Thank you

    Hello Sebastian87,

    I would like help with your TouchSmart from HP ENVY 15-j070us Notebook PC.

    Try to install the updated high definition (HD) of the AMD graphics driver from the following link: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-123946-1&cc=us&dlc=en&lc=en&os=4158&product=5447177&sw_lang=

    In addition, given that you have updated for Windows 8.1, I recommend using HP Support Assistant to perform all HP Windows updates and updates have been made. Click here for assistance.

    If you need all drivers for your laptop, you can download them from the following link: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4158&lc=en&cc=us&dlc=en&sw_lang=&product=5447177

    Best regards

  • Size of the HARD disk

    Hello

    I just wanted to ask does anyone know what is the size of the disk is in the HP Envy 15-J004SA laptop? It is a 2.5 inch?

    I think replacing it with an SSD.

    Thanks in advance.

    Hello:

    Yes, it's a standard of 2.5 "9.5 mm laptop hard drive.

    Maintenance manual is below...

    http://h10032.www1.HP.com/CTG/manual/c03733656.PDF

  • Flashing hats

    Hey guys,.

    Today, I noticed that my NumLock blinking constantly. The button works correctly and the operating system (Windows 8.1) is all good also. I'm just a little scared that it is a warning signal.

    Flashed it for a long time even if it seems to have stopped now.

    Even if it stopped, the light is now constantly off. If I press the button when the caps is off (ie. Turn on caps) and then it flashes quickly once I press the down key, then stays off. If I press the button once again, he is off all the time and continues to work like this.

    OK, not sure how long it was, but it started to Flash, it takes about 1 second to bike (on, off = 1 s)

    Anyone have any idea what this means? I tried to reboot when I saw for the first time the flashing and it continued after the restart.

    My laptop is HP Envy 15-j004sa

    THANKS IN ADVANCE!

    Hello DipunMistry,

    Thanks for posting on the HP Forums!

    I understand the computer problems and the lid locks flashes. I'll do my best to help you!

    There is a HP paper to solve the problem. The document contains valuable troubleshooting steps as the reset of the laptop, the laptop cleaning and more. The document also contains information to identify the problem. For more information, here's the document: computer does not start and the lights blink or the computer will beep

    I believe that this document will help you. Please post your results. Thanks again for the display on the HP Forums. Have a great day!

    Mario

  • HP ENVY x 360-m6-w103dx: touchscreen burn my finger

    When I touch my screen, it burns my finger. It hurts when I slide your finger on the screen.

    Hi @UZAIR70,

    Thank you for joining the HP Forums!

    I noticed your post when your your touchscreen, it burns the finger. With your HP ENVY laptop x 360-m6-w103dx. I'm happy to help you!

    Please see the following guides:

    Don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    I hope these guides will help!

  • Disable the touchscreen for TouchSmart HP ENVY 15-j173cl Notebook PC

    The laptop:

    HP Envy TouchSmart 15 (15-j173cl) PC notebook

    Windows 8.1 Pro

    The problem:

    I use an external monitor, so my laptop is usually closed.  Randomly, my touchscreen think something is in contact with her, which disrupts everything I do.  I would like to completely disable the touch screen, because I do not use it.

    I thought that maybe the lock was not shut down properly, but the screen resolution changes when I close the laptop, so that it KNOWS that it is closed and switches to the right resolution for my external screen, but it IS NOT to disable the touch screen, and little land or something is in contact with it, changing where my mouse is pointed where I type, etc.

    I tried to clean the screen and the keyboard with compressed air.

    The problem occurs randomly; Sometimes, when I'm CAD for the day, sometimes after hours of work.

    Hello, @rockspeak

    Welcome to the HP Forums.

    I see you want to disable the touch function in your display for portable computers. I will help you with that.

    You can do this by going to Device Manager > click on the + or > by Human Interface Devices > right click on the touch screen to HID-compliant > choose disable. This will have disabled the touch capability.

    I would like to know if it works for you.
    Thanks for posting on the HP Forums.

  • HP Envy laptop: m7-n011dx: HP Envy laptop - replace touch screen without touchscreen standard

    The touch screen on my laptop HP Envy (m7-n011dx) is cracked.  Is it possible to replace the touch screen with a standard, the right touch, the screen? I did not touch screen and actually prefer something more sustainable.

    If so, can someone point me to the spare part number good touchscreen?

    If not, can someone confirm the correct touch screen part number?

    Thank you.

    Hello @elcapitan26,

    Thanks for the quick response!

    My mistake, this is the number of spare part: 813808-001.

    Take a look at Chapter 3, Page 20 in the guide.

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Kind regards!

  • HP Envy 15-k209ne: touchscreen

    as you can see, Windows says I have a limited contact support with 2 points of contact.
    should which driver I install to run?

    In addition, it is worth noting that Windows wan't able to recognize this until I installed a certain driver that I can't remember, so I don't know if my laptop can have a touchscreen or not
    If the product name is not displayed, it's HP Envy 15 k-209ne

    Hi @Yousef1,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! I looked in your question on your HP ENVY 15-k209ne Notebook and concerns with the touchscreen do not install it.

    Here is a link to your product page that shows me that, unfortunately, your system is 39.6 cm (15.6 ") diagonal HD BrightView - backlight WLED (1366 x 768) not a touch screen.

    I hope this helps.

    Thank you.

  • TOUCHSMART ENVY 15-J003ED - replace no touchscreen

    I have the Touchsmart, Envy 15-J003ED laptop and I cracked the glass of the screen. The screen works fine, but the touchpad function now does not work. I found replacement screens, but I don't want to pay hundreds for the touchscreen I don't use it that much.

    Is someone can you please tell me if I am able to replace this screen with a no touch screen replacement:
    http://www.LaptopScreen.com/English/model/HP-Compaq/envy~15-J003ED~TOUCHSMART/

    I would also buy a new edge of bezel as it is currently part of the glass.

    What an Exchange directly, as shown in the maintenance manual, or is the more complex tactile screen to remove and reinstall?

    Maintenance manual (Page 57):
    http://h10032.www1.HP.com/CTG/manual/c03733656.PDF

    A big thank you to all those who can help.

    Hello HPLaptop1234,

    Welcome to the HP Forums!

    The only screens that can be used with this computer are in the interview guide. And it's a simple Exchange, by following the instructions in the guide. I checked to make sure

    Mario

  • HP ENVY 15-J111TX: touchscreen not detected

    Product name: HP Envy 15-J111TX

    OS: Windows 8.1

    I ordered this laptop in places of retailer and received today. We were very curious to check the touchscreen functions. But nothing happened. The touch screen has not been detected. [No stylus or touch input available for this device]. There is no settings under control panel as tablet...

    I bought this laptop to give as a gift. But it become waste.

    Hello

    Because it doesn't have a touch screen. You buy a machine with touch screen to be able to implement.

    http://support.HP.com/us-en/document/c04031365

    Kind regards.

Maybe you are looking for

  • where are my questions and answers?

    where are my questions and answers?

  • problem with iphone pictures zone

    Hi all I can't understand why the dates and photos in camera roll are about my current residence (New Zealand) at the place where the photos were taken... Makes me crazy because for example, the photo was taken at the Japan: Jan 5th @ 20:30 and now i

  • OE6 - of xp sp3 - cannot 'find' a message

    OE6 function "find > Message ' (Ctrl + Shift + F) doesn't work on my xp sp3 machine. When I enter a search term (for example, an e-mail address for an article that I KNOW is in my Inbox), I get nothing. I created a new identity and import my AddressB

  • vBundle and 6.7.0 - Compatible?

    When I upgraded to v6.7.0, I had a performance problem that prevented the collection of consistent data.  A point that * seems * be messing things upward was the vBundle and speed cartridges that I had installed.  After uninstalling, things were bett

  • Creative cloud desktop application starts do not

    My desktop creative cloud application is not loading or starting.  I just get a wheel that rotates, the animation of a circular line, not the beach ball.  Kind of like his connects not to the server or its offline or something.  Any idea?  Im trying