HP ENVY 15-j119so (G1N99EA): Wifi adapter and battery upgrade

Similar Questions

• BDX4350KB Wifi adapter and firmware upgrade doesn't work do not

  It is a sequel to my earlier question about if the WLM-20U2 Wifi adapter will work in my blu - ray player.

  After buying the adapter I plugged it and a message 'not supported', if I tried to connect wireless it says there was no an adapter connected.

  So I assumed that this necessary upgrade, so I formatted a 1 Gb USB drive with the FAT file system, downloaded the file level (version 39 http://www.dl.toshiba.com/player/NA/GB/EN/BDX4350KB.html) and copied the file .bin on the USB.

  When I plugged into the player and said to check the disk for a file to update it tells me that "frontend file is not found"... There was only one file to download, and it wasn't in a folder so I guess I'm supposed to just copy that file on the USB drive.

  I checked the USB port with a memory stick with photos on and it works fine.

  How to get the upgrade to work in the hope that it will enable the wifi adapter to work?

  Thank you

  Have you checked the guide in PDF firmware update?
  [Update firmware BDX4350KB | http://fget.dl.toshiba.com/manual/install/10009/Installation_Instruction.pdf?fromPid=%2Fplayer%2FN A%2FGB%2FEN%2FBDX4350KB.html&f=Installation_Instru ction.pdf]

  _ * How to upgrade the F/W * _

  (1) update firmware requires the USB of size max.2GB. Please make sure you format the Flash DRIVE to FAT/FAT32 before you start the upgrade procedure.
  ? Create a new folder on the USB drive and name it UPG_ALL
  ? Unzip the firmware file and copy it in the folder UPG_ALL.

  2) turn on the BD? Drive and make sure that you can see the player's on-screen Menu.
  ? Insert the USB key containing the Firmware upgrade file in the USB of the Blu slot? ray player

  3) press the "SETUP" button on the remote control.

  ? Select keys on the remote control UP/DOWN
  ? Symptom
  ? Upgrade
  ? USB storage device

  4) press the OK button on the remote control depending on the USB storage device.
  ? Now the upgrade file is under research. Please wait massage will appear

• Ongoing problem with my Netgear WiFi adapter and hardware software.

  Please help me solve this problem, which still exists.  I even once contacted NETGEAR, but they say it's a problem for six months and it is only cosmetic in that the adapter Netgear WIFI does his job, despite the failure of the adapter Netgear WIFI Wizard appears immediately except to re - install via CD Netgear...  Read on: Although my new Netgear dual-band "N" WIFI ADAPTER works optimally and, out of curiosity, I have re-installed several times using the accompaniment CD... there is a small problem I want to solve: when I click on the WIFI adapter desktop ICON, I get a window of PSI with the message "FAILURE of SERVICE.  Yet once, WIFI actually moved and is also indicated under the programs/features and works perfectly well.  When I bring up the icon under all PROGRAMS, the same result occurs: the same message reappears: "FAILURE of SERVICE.  When I called Netgear to the Philippines call center, support staff of so-called tech advised me to ignore the message and that I was the first caller on this issue, "as long as the WIFI adapter gives you the desired signal quality and speed, just ignore... "When I pressed on others, a supervisor at the call center told me that she would pass on the information that I provided to their engineers to study the problem.  In addition, the supervisor told me that no one had contacted the Center to call on this particular issue.  Yes, I even disabled the built-in WIFI adapters (Atheros), but the 'problem' in question still exists.  Please note that it is a phenomenon of long months and that in the past whenever I clicked on the ICON, the regular Netgear Windows would come upward, including the various hot spots in option, etc. I even updated the software successfully and rebooted the laptop, according to Microsoft's Windows Update instructions.  Please let me know what is happening and how I could fix this ' cosmetic ', if that's what it is, according to Netgear support.
  Thank you very much.
  Joe

  Hello

   
  Have you tried the steps suggested by John from the link below?
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/when-i-try-to-run-NETGEAR-software-for-use-with-my/ae7ae3be-BE62-4742-b9fd-1cf4b8dc3124
   
  If so, then share the results on this thread.

• HP-15-ba025au: hp-15-ba025au wifi adapter and the lack of wifi connection

  Hello

  I bought a hp-15-ba025au yesterday. After you have installed 10 64-bit Windows, I found this wifi is missing.  I don't see Wifi in Device Manager. I can see Bluetooth.

  I see a "network controller" under the heading "other devices." Not sure if this can help.

  See you soon,.
  Pierrette

  Hello:

  The list of parts for your laptop says that it comes with a RTL8723BE-VB of Realtek 802.11b/g/n 1 x 1 Wi - Fi + Bluetooth 4.0 adapter WLAN combination.

  http://PartSurfer.HP.com/search.aspx?SearchText=X5Q25PA

  Here are the links to the wireless and bluetooth drivers you need for this model of the wlan card.

  This package contains the installation package driver for the controller wireless LAN Realtek RTL8723BE/RTL8188EE in the laptop models running a supported operating system.

  File name: sp75613.exe

  This package contains the installation package driver for Realtek Bluetooth in laptop models running a supported operating system.

  File name: sp75614.exe

• HP Envy 4500: ENVY4500 a wifi fall and do not find him

  Great printer... but falls the wifi router.

  Had previously connected well what configuration. Works for a few weeks and then abandons the connection and during a installation - there is no sign of my available network router.

  Settings running through the 'app'-, it just says: it does not find the printer (obviously because it is not on the network)

  If connecting via USB then it works. But I don't want to connect with a USB key!

  Any help would be thank you very much.

  Note - This has happened but I actually reset my modem to factory settings and it reconnected to the new 'network settings' but it is NOT convenient to continue to do.

  Hi @ukdocinnz

  Thanks for your comments.

  You can try the following:
  
  Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem
  
  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PDU
  
  Hope that helps.

• WiFi adapter and its driver

  Last week I bought

  HP 1000-1411TX on ebay.  It has Wireless 802.1 b/g/n. What is the driver for this card wifi to the discovery of wifi networks in my laptop.

  Hello:

  You need this driver for your laptop wireless card.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-123851-1&cc=us&DLC=en&LC=en&OS=4132&product=5437444&sw_lang=

• Envy 15-j108el: type of motherboard and RAM upgrade

  Hello world

  I want to know what motherboard my pc and the maximum amount of ram (and type) that can be installed on. For the moment there 2x4gb slots DDR3L 1600.

  Thanks in advance

  Hello

  Manual

  http://h10032.www1.HP.com/CTG/manual/c04091768

  http://www.Kingston.com/en/memory/search/PartNumber/default.aspx?partid=693374-001

  Crucial system scanner

  Customer accessible/upgradable memory module two slots Support for DDR3L channel (1600 MHz)

  Support up to 16834 MB of RAM in the following configurations:

  ● 16834 MB (8192 MB × 2) ● 12288 MB (8192 MB + 4096 MB)

  ● 8192 MB (8192 MB × 1, 4096 MB × 2) ● 6144 MB (4096 + 2048 MB)

  ● 4096 MB (4096 × 2048 MB × 2, 1 MB)

  Concerning

• Adapter and battery replacement on the Satellite 2430 402

  I'm looking for a power supply of replacement satellite 2430 402 and PA3250u-1BRS battery. I tried eBay and can't find something suitable. Any suggestions please?

  Hello

  I found information that to use this device there are two spare batteries:
  Battery Pack Pack PA3250U-1BAS, PA3250U-1BRS battery

  EBay isn't just the place where you can find it. I put t know in which country you live but google a little and maybe you will find an online PC store where you can order.

  Good bye

• HP - Pavilion (15-f010dx): HP Pavilion f010dx 15 - module WLAN and battery upgrade options

  Hello

  I recently bought the HP Pavilion 15-f010dx and let me know if I am able to upgrade the WLAN module that has bluetooth? If it is possible, what drivers I need?

  This laptop came with a battery 3 cells. Are there options for a 4 cell?

  I appreciate all the help/instructions you can provide. This is my first laptop for over 6 years.

  Thank you

  -CSM - wrote:
  

  Hello

  I recently bought the HP Pavilion 15-f010dx and let me know if I am able to upgrade the WLAN module that has bluetooth? If it is possible, what drivers I need?

  This laptop came with a battery 3 cells. Are there options for a 4 cell?

  I appreciate all the help/instructions you can provide. This is my first laptop for over 6 years.

  Thank you

  Hello

  It's your model Manual

  Plug

  Supports the following battery: 2: 16 in the Manual Page

  ● 4 cells, 41 WH, 2.8 AH (number of HP 752237-001)

  Support for the following WLAN: 2, 16, 30 and 31 in the Manual Page

  ● Ralink RT3290LE 802.11bgn 1 x 1 Wi - Fi + BT 4.0 Combo adapter (number of HP 690020-001)

  Your drivers are here.

  Concerning

  Visruth

• How to install the USB WiFi adapter?

  I've received a USB WIFI adapter and do not know how to set up or even knowing if it is attached.

  New hardware has been installed on the plug-in. Switch turned on, but there is nothing that lets me know he's working.

  Hi garyhenrymacphail,

  Hmm and what should I say now? I also put t how to configure your USB WiFi adapter because I don t know which you have, what laptop and operating system.

  The spirit normally each USB WiFi adapter, you also get a manual how to install it. Alternative, contact the manufacture of this adapter for more information.

• How to connect the USB WiFi adapter to a Linksys e2500

  I need to use a USB Wifi adapter and I don't know how to configure the router to communicate with the device.  The installation disk supplied with the device that has the installation software does not work with windows 7.  Because I don't have the installer, I am trying to configure it manually, but I don't know how to do it.  I guess there is something in the configuration of the router, I need to connect the USB WiFi Internet.  I am ignorant of network, so if I'm away from base here can you give me some advice on where I need to focus.

  Yes, I know the router puts a wifi signal, but my chromecast will not work with it.  After plugging the Wifi adapter and try to put up with Windows, I had the beginnings of dialog between my chromecast device and Setup chromecast - that's never happened before.

  Ed

  I tried this site and I remember there were some problems.  It turns out that there must be default windows drivers and they work fine.  I finally got to work and my Chromecast is upward and the work.

  Thanks for your reply.

  Ed

• HP 470 G1: HP ProBook 470 G1, wifi N for wifi adapter

  Hello, I have HP 470 G1 with wifi N MediaTek 7630E wifi adapter, and I want to know is posible for it replace with wifi adapter?

  That is right.

  The 3160 should be good if your laptop has the BIOS whitelist in force.

• HP 14 laptop: how to replace the QCA9565 of Qualcomm Atheros 802.11b/g/n WiFi Adapter

  Hello

  I have a laptop HP 14 which is currently used for academic purposes. However, at the school, the WiFi is dual band, and so I can't connect.  At the moment I have a QCA9565 of Qualcomm Atheros 802.11b/g/n WiFi adapter and I am aware that is not double band. So is it possible to replace the current single band with a dual band adapter? Is it is possible to replace the card, then you have suggestions of what to buy and how to install the product in my book. If there is a free alternative, please keep me informed.

  Thanks in advance.

  Hey @Raiyan1 ,

  Here is a link to page 31 of your manual . The Wifi card is a mini map 1 x 1.

  Thank you.

• Problems with wireless WIFI adapter. DWA-130 | Windows 7

  Hello

  I did a post on this a few months back and it has been partially resolved; I tried to get my wireless to work on Windows 10 WIFI adapter and the people trying to help me as I discovered that 10 Windows does not have to support the device.

  Now, I have a new problem. I recently, and recently I mean today, reformatted for Windows 7 because I'm not a big fan of Windows 10 (which is not because of my WIFI adapter doesn't work do not, it is mainly because of all the glitches that come with Windows 10 because it is so new). Sort of, I tried to install my WIRELESS card on my Windows 7 Desktop, and everything I did (I honestly don't know) I can't make it work... And here, if possible, why...

  

  I think that the "unknown device" could be my adapter. If so, that would mean he has not installed correctly and therefore is not working right (or not at all, in this case).

  How can I remove from my device manager? I have already used "uninstall Device Driver", and he says it uninstalls, but once I update the list, he's back again, this time with no way to uninstall it - I have to reboot the machine and then the option will pop up but then if I refresh it, it'll be welcome back here - now, it will not disappear.

  My WIFI adapter is called "DWA-130" and the model number would be "DWA-130F1.

  Help would be very appreciated.

  The problem has been resolved.

  Thanks for any help, in the end, I copied files from disks on my desk (before copying them, I just tried to use the DISK itself), then I went in "Devices and printers" clicked on my device (the "802.11 n WLAN [DWA-130]"), then went to "Device properties" and "Update Driver". I went to my office through the teleprompter and then when I was in the files on the disc, I went into the folder "Setup" and you press 'OK', in which he finally started to install the necessary drivers and you read this, I use my wireless adapter to access my internet.

  One thing to note;

  Once it was installed, I went to the 'map settings' to connect to a preferred network, and some networks were visible. So I had to add mine in manually, once I added it manually, the WIFI indicator on my taskbar, when I opened it, all the other networks in my neighborhood was now visible as well.

  I hope I helped someone with problems.

• For HP G42 351TX WIFI adapter is not installed

  Hello

  Due to hard drive problem, I've done a re install of windows 7 using product key on the back of the laptop and successfully activated with phone Microsoft support.

  For the installation of the driver, I cannot install the RALINK wifi adapter and wifi does not work for this reason and exclamation yellow appears on the network controller in the Device Manager.

  Coulld please provide card you wifi network is appropriate to install to my laptop.

  BTW, os is Windows 7 Home Premium.

  Thank you

  Vivek

  No worries.

  This should be the driver that you need. It's a Broadcom wireless adapter.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-83617-1&cc=us&DLC=en&LC=en&OS=4063&product=4294191&sw_lang=

  Thanks for the info PCI\VEN.