HP ENVY 15t Quad TouchSmart: judgment of Quad TouchSmart Battrie HP ENVY 15t load Bapres runing HP update.

Similar Questions

• HP ENVY 700-049 will be not updated to Windows 8.1 - 0xC1900101 - 0 x 20018

  I recently bought a HP Envy, office 700-049 and have updated to the most recent Windows 8.  I re-downloaded and installed all the drivers for Windows 8 listed on the support page.  I disabled the LAN wireless in Windows (no way to do it in the BIOS I can say).  After that, I went to the App Store Windows and ran the 8.1 update.  The machine restarts and begins to set up the devices, but stops before the end with the SYSTEM_THREAD EXCEPTION NOT_HANDLED error.

  On reboot I give myself

  0xC1900101 - 0 x 30018

  It appears in Google... and I tried common recommendations (install updates, install the latest driver, disable WLAN)... y at - it additional suggestions or I'll just have to hang tight on MS to fix this?

  My wrist is tired of bouncing over the shortcut bar. :-)

  Kind regards

  -Tony

  Obviously, make sure you have the latest drivers and updates installed... but I managed to get through there.

  I'm pretty sure that the Ralink Wireless card is the culprit.

  In addition to the steps I have described here above I have disabled the integrated graphics card.  Also, I was going through a KVM.  I hooked the mouse, keyboard and monitor directly in... using the graphic adapter PCIx.   But I suspect that the following was "the miracle."

  I had a set of screwdrivers on a small scale and a pair of pliers and took the Ralink wireless out.  It's just "above" where is the PCIx graphic card.  This screw was really in there... Please be very careful not not to strip out.  Once the screw is out, it appears out of the slot.  I just hid it near bays of drive.

  With the offline wireless the 8.1 update succeeded.

  -Tony

• Want H8-1534: could not start HP Envy H8-1534 pc after Windows update 10, 1607

  Windows 10 has made automatically update 1607 (KB3176936) on the pc of my wife (HP Envy H8-1534) about 6 days ago. Since then I could not start the pc the first time I turn it on.

  When I hit the power button on the monitor lights up with the HP logo on black screen as usual but the loading icon (spinning points) does not start. Fans start, but there is no activity on the Tower in the way of flashing lights or beep sounds. If I turned off the pc by using the power button, wait 10 seconds and turn on again, the pc will start up as normal. So far, for the last 6 days, it took the 2nd attempt so that it starts the pc every time. It almost seems as if there are not able to go to the system except for the fans in this first attempt to start.

  I ran a test at startup by pressing the F2 key without no problems found. I disabled the SATA power management in the BIOS. I ran the Windows startup with no result repair. Here are the results of the txt file.

  I researched all the possibilities. I fear that this could begin to worsen. Any help will be appreciated.

  Name: Target OS Test
  Result: Completed successfully. Error code = 0 x 0
  Time taken = 265 ms
  The test is performed:
  ---------------------------
  Name: Checking content Volume
  Result: Completed successfully. Error code = 0 x 0
  Setting time = ms 2391
  The test is performed:
  ---------------------------
  Name: Diagnostic Boot manager
  Result: Completed successfully. Error code = 0 x 0
  Time taken = 63 ms
  The test is performed:
  ---------------------------
  Name: Diagnosis of the system startup log
  Result: Completed successfully. Error code = 0 x 0
  Time = 0 ms
  The test is performed:
  ---------------------------
  Name: event log diagnosis
  Result: Completed successfully. Error code = 0 x 0
  Time taken = 62 ms
  The test is performed:
  ---------------------------
  Rated: Internal audit of State
  Result: Completed successfully. Error code = 0 x 0
  Time = 0 ms
  The test is performed:
  ---------------------------
  Name: Start-up condition Test
  Result: Completed successfully. Error code = 0 x 0
  Time taken = 31 ms
  Root cause found:
  ---------------------------
  State the start indicates that the OS booted successfully.
  ---------------------------
  ---------------------------

  DBHPENVY,

  I turned off quickly startup on the pc and until now he started first try twice. I'll let you know how it does after a few days of testing.

  I read everything it does and it is perfectly logical, how it might affect our pc is the way. Go to this link and read about it and see if she could help. I thought I had turned off fast start already, but after an update he might have gotten turned on.

  Here is the link: http://www.tenforums.com/tutorials/4189-fast-startup-turn-off-windows-10-a.html

• HP ENVY 700-029eb desktop PC. Update to Windows not sure 8.1?

  Hello world

  HP ENVY 700-029eb-computer for office
  Model: E3H39EA

  Windows 8

  A question related to the following message on my HP computer:
  -----------------------------
  HP has not tested this PC with Windows 8.1
  For this reason, HP is unable to update providence instructions or Windows 8.1 drivers.
  You can now lose stability and basic functionality if you try to update your system.
  -----------------------------

  A Windows 8.1 update could make the System unstable, so the message of HP.

  But my computer is always busy preparing the update and guard asks me to do the 8.1 update.

  So can I install Windows 8.1 safely on this computer? Or how to turn off the update?

  We appreciate your comments and advice.

  GuyterB1964, welcome to the forum.

  I do not understand these messages.  Here is the download page for software and driver for the computer.  As you can see, all the drivers for win 8.1 are listed.  They would not list them as much as they have not been tested.  I see no reason not to do the update.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• ENVY 13-D046TU: F.35Ap1 BIOS update kills port HDMI on ENVY laptop

  After installation of the firmware update marked Softpaq number: SP75152, F.35Ap1 Version now four of our laptops (13 "and 14" ENVY ENVY) have a HDMI port not working. The external screens are 'no signal '.

  We spent a lot of time with the help of HP (via Hong Kong, we found ourselves in India). Remote control sessions. All a waste of time. The update of the BIOS is faulty, no system restore cannot solve this problem.

  Same day (June 13, 2016) one of our laptops automatically installed this update of the BIOS with the HP Support Assistant and killed the HDMI port.

  A. is there a way to acquire and install the previous BIOS?

  When can b. we expect a new update of the BIOS?

  C. how the hell did this update of the BIOS pass test? -> 4 / 4 updated computers laptops have a broken HDMI port. We have 7 other laptop on the left who are fortunately not updated.

  Hi there @BugFinderand @DebVancouver.

  Welcome to the Forums of HP Support!  It's a good place to find the help you need, other users, HP experts and other support staff. From what I understand, bothl of you experience the same problem with HDMI after a BIOS update.  I'm happy to help you with this.

  I would, if possible, that each of you try the laptops HP - restore the BIOS to a restoration to the having previously worked BIOS.  The main purpose is to return you to a working state. If this method works for you, obviously do not install BIOS update again.

  Edit: Bugfinder reported that restoration, the method of BIOS didn't work for him, but he had to do several times (4 times in at least one case). I guess you could say that it is true to its name, and I thank very you much for the comments.

  Please let me know if it works for you and if not let me know if there is an error message any. If this does not solve your immediate problem, please mark this message as a solution. Bravo would be appreciated as well.

• HP envy 7: loading a copy of windows on a hp envy 8.1 7

  tried to load a copy of windows 8.1 on my computer hp envy laptop 7... bed the message... control the media... in case of failure

  "Select boot image is not authenticated" any help would be appreciated

  Make sure you have an original DVD of windows

  If you want windows copy dvd, you can use 3rd software trust

• 5532 ENVY: ENVY OF LOADING CARTRIDGE 5532

  Bought a new desire 5532.  After setting up I was informed (on the printer screen) "the next cartridge must be replaced" (black).  After cleaning of the cartridge and the printer control, I decided to replace the cartridge with the spare provided with the printer.  This time, the error message reads "the ink cartridge is not intended for use in this printer" of ideas out there?

  Hi @steved866,

  Welcome to the HP Forums!

  I noticed that you have trouble with your ink cartridge for your printer HP Envy 5532. I'm happy to help you!

  Please try the steps in this guide, error 'ink cartridge problem' of resolution. If this does not resolve your problem, please Contact HP phone support for assistance. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope it's useful!

• HP Envy M6 64 bit problems after update to 8.1 windows

  Last night I updated to windows 8.1 8 and have had problems since. I have a 64 bit HP ENVY #C2L94UA # ABL m6 after update, I tried to play Devil may Cry game that worked perfectly under 8.0 and then he comes to start charging the computer turned off. I did research online and exhaustion possibilities why including the abolition of the xbox drivers and reinstall the game but nothing doesn't always turns off the computer. I then opened AMD vision, to try to adjust the settings, I noticed I was now just as 3 options of things to settle. I could just adjust power consumption on the processor dependimng on if the computer was plugged in or not. Went a whole optiuon to adjust graphix and all the things to do it graphically disappeared. Then I redownloaded the catalyst drivers and tried to reinstal. Once the computer off again. Every time I have try and update the graphics it stops. Site Web HP says that all my drivers are up to date. Then, I rebooted the computer by pressing ESC and tried to do a system refresh. He failed. All the options of wiping my computer clean and refreshing failed. I said that it lacked a partion for one of them. Even system restore will not work. It shows my Ati video card in device manager. Please help me ty

  OK I solved my problems that I did start the computer in safe mode and then I uninstalled my cards video from Device Manager. I then restarted the computer and installed the version of catalyst that was said to work with 8.1 and switchable graphics cards. I have restsrted and have more no video issues at all.

• HP Envy 17-J001TX E3A59PA #ABG Windows Update 8.1

  Hi guys,.

  The HP Envy 17 - J001TX E3A59PA #ABG has not been tested by HP for Windows 8.1 update, according to the Web site. Is there an estimated time when we can expect the update is available for this machine?

  Thank you very much

  Adam Taylor

  Based on the HP ENVY 17-j001tx laptop drivers page, HP provides WIndows drivers 8.1 for the HP ENVY 17-j001tx laptop. This is an indication that this model has been tested with Windows 8.1

  If you have any other questions, feel free to ask.

   

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• HP Envy M6 - 1158CA - BSOD on Windows Update

  Hi all, I write because I have experienced some problems with my laptop (a HP Envy M6 - 1158ca), whenever I update my Windows.

  I am currently running Windows 8.1 64-bit.

  The problem is when I stopped my laptop, it will basically force an update on that just before his arrest. The problem is whenever I stopped him, he is going to update. Update ends normally, and the laptop is able to stop. The problem starts whenever I restart the laptop. When I restart the laptop, it will go to the graphical boot screen (the HP logo with Windows loading icon), and suddenly it'll show the blue screen of death. The laptop will restart, try to start again in the operating system, then it will show the blue screen of death once more. It is on average three times each time that I update. After the third time, it will take me to the system repair option, and I have to use the system recovery tool to restore my system to an earlier backup. The problem with that? No matter what program I have uninstall gets reinstalled, any document that I edit gets deleted or all my work will disappear.

  I was wondering what is happening with my laptop, and how I might solve this problem.

  Again, I'm under operating system is Windows 8.1 64-bit.

  and the update, he tries to push, is probably Windows 8.1 update 1.

  Hi 786Tobi,

  Try the rest of this document performing a new installation of Windows.

  I hope this helps.

  Thank you.

• ENVY-H8-1435: Missing BIOS after update?

  Hey friends,

  Have a bit of a problem scary underway.  I have a desktop HP Envy 1435 PC; went ahead and tried to update the BIOS now.  Everything seemed to go smooth until I rebooted.  The PC off and on twice now with no disconnection between the two.  Finally, he stuck on the third try - but rather my screen was black during start-up until finally my office as usual.  I think maybe that's not read the graphics card during this period, but I'm not sure.  Any help would be appreciated.

  Hello

  Remove the graphics card on try the video outputs of the motherboard.

• HP envy m6 1103tx: I can't update my sound driver beats I am experencing the worst audio

  Mr President.

  I'm the worst audio exprencing, I paid you must to my laptop only for sound quality, but I can't get the update, even the low version of the computers laptops hp which my use refugees get good sounds, please send me bat current driver version audio update.my is 6.10.6418.0 which is updated on 2012.07.24, please help me solve this problem

  Hello:

  See if installing this driver solves the problem...

  This package contains the driver that allows Audio IDT high definition (HD) in the notebook models that are running a supported operating system.

  File name: sp63555.exe

  Exit the: 30 September 2013

  Version 6.10.6491.0 Rev.

• HP Envy Phoenix 810-160: graphics card update

  Course record:

  POWER SUPPLY:

  Inside 600 Watt (100V-240V)

  Hello

  first of all, I must say that your pc, fortunately, supports UEFI so that this card should not be a problem

  However for the card to work or to initialize with the pc, you need to maybe disable secure boot and go to the support of legacy. (this is what you need to know about what you heard on legacy mode)

  If I can guide you through this, for details and graphics during this visit the hp support page on the bios settings

  as for the question of the guarantee... If you are still IN the warranty period, opening manually to the top of the Cabinet would mean breaking the seal at the bottom of the pc... only the limited warranty of hp then apply... spend your license information and warranty before doing this...

  come to the 'best' part... it is an adjective and depends on your perception of and how much you can spend in the pursuit of it...

  a solution of 2 gtx in sli/crossfire mode 970 would be as powerful, if not a little more of the x... purpose of titan that would need a power 750 w... once again, the 980 is better that the 970 by a large margin, but nearly twice the price... a 600w will be enough for either, although

  hope that answers your questions

• laptop HP envy 15 ts: touchpad by clicking Update problems post windows 10

  Since update to windows 10 my touchpad not working properly. Whenever I have try and click anywhere on the touchpad, it works as if I clicked the middle mouse button. I can't highlight text or right-click on things on the Web pages, it appears the scroll icon. Tapping can still select things as usual. Thanks in advance.

  clockwiseduck

  Thanks for posting the full name of the system

  install the new HP Support Assistantyou of new drivers and bios for install

• HP ENVY 700-305no desktop PC: Bios update failure.

  Long story short (a little).

  I got a virus, is a virus really means, crypt all my files, prevents the opening of antivirus programs and redirects the downloads.

  virus survives 3 reset factory, 3 hard drive formats, and a reinstall of Windows.

  This leads me to believe that he himself got into the Bios of my computer.

  so I downloaded the latest bios for my system, in this case

  Update the BIOS HP consumer desktop PC (SSID family ROM 2AF3)

  through the Setup program on another computer, I installed the update to the bios of my USB,

  inserted in my main pc, held down the Windows and key B, while starting my computer.

  This led beeps and my computer Wrooms, 10 minutes later, nothing happened.

  I decided to start the installer directly from inside infected computer, but this resulted in a failure too.

  say that the downloaded bios is not compatible.

  What I'm asking is how I should go about the removal of the old bios (possibly) infected and reinstall it again.

  I'm not aware of a way to Flash the BIOS in Ubuntu, but it might be possible if there is a wine app in the version you have.  I have not experienced or read where someone else tried it either.  You could ask for more in the Ubuntu forums.  Don't know if it is possible to WIN PE 3.0 either.