HP Envy 17 2080 and 330-180 GB Intel SSD

Similar Questions

• HP Envy 4500: HP Envy 4500 printer and access Wifi University / iPhone Wifi Hotspot

  I have a HP Envy 4500 home and signed up for the moment of ink.  Works very well and I was hoping for a similar arrangement for my daughter who has just started at the University.  It seems that there are problems with the HP Envy 4500 connection to University share wireless networks.  I was wondering if the following scenario would work:

  1. his computer is connected to the printer via the USB port
  2. the printer is connected to a hotspot wifi on iPhone (his phone is already connected to wifi University)

  This work of the printer relay information support to HP for the purpose of instant ink?

  Thank you very much

  It worked so might be a good work around.
  
  Thank you

• HP ENVY 750-177c: I have a HP ENVY 750-177c and has been upgraded and 2 thin black wires were disconnected.

  I have a HP ENVY 750-177c and has been upgraded and 2 thin black wires were disconnected from the motherboard.  They have loops at the end of the wires that look like they might slip on the pins.  The wires connect to the upper part of the box of the computer.  Where to reconnect?

  Find this card in your system. It is the M2 half-bridge Wireless card.  The other end of the wires must always be fixed.  There are 2 heels left and right of the '2 '.  If everything is correct, it is your physical WI - FI antenna. Just re - stick inside the case.  The small clips are used for an external aerial connection.

  

  PS<> have a good day...

• HP Envy 17-184na and Envy 17-141na

  I was comparing prices from different stores on a laptop computer called the

  HP Envy 17-j184na and found one called the HP Envy 17-j141na. Both laptops I found have model names different but seem exactly the same for me, so my question is:

  What is the difference between the Envy 17-j184na and 17-j141na?

  j 184na:

  http://WWW8.HP.com/h20195/v2/GetDocument.aspx?DocName=c04332225

  j 141na:

  http://support.HP.com/us-en/document/c04356668

  Only quickly obvious difference is the hard drive. The ordinary reader with 141 5400 RPM and 184 has a hybrid drive with a 8GB flash cache which should improve performance a bit.

• HP envy 5530: hp envy 5530 administrator and password

  HP envy 5530 administrator and password

  Hello

  Please can someone help me.
  How to reset the password for administrators
  link below shows the web page out of Im lock.

  How to reset the password for administrators

  http://h30434.www3.HP.com/T5/image/serverpage/image-ID/123490i6312F91B84AC8FE7/image-size/original?v...

  Hi @leggoman,

  I am convinced that I will be able to help you find a solution, and I ask only that pay you it forward. When solve us the problem, I would mark you kindly post as accept as Solution so that others have the same or similar problem can find what worked for you.

  To reset the settings of the admin in the printers Web server shipped as shown in the screenshot you have validated, you need restore the network printer. Once restored, you must give the printer on the network.

  To restore the network settings, you will need to access the menu/wireless network on the front panel of the printer and look for the default network.

  Please do not forget to keep me informed of the result, so I can keep up with you. Thanks, I look forward to hear from you.

• I have a computer laptop envy m7-k111dx and the hard drive has gone bad

  I have a computer laptop envy m7-k111dx and the hard drive went bad and want to order a HP recovery disc through the website to order it is to take me through circles

  Please use the support of HP recovery, you created earlier to return the computer to a factory State. If you create your HP recovery media when you first set up your computer, please contact the official support of HP in your region / country, via the HP portal to support all over the world, to see if the HP recovery support is available for your computer.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• HP Envy 17-3000 (3D) - replace internal 80 GB SSD? (or change the boot order?)

  My Envy 17 - 3xxx (3D) has a 80 GB SSD as boot/OS drive and a 1 TB HARD drive as secondary.  I would replace the 80 GB SSD with a 500 GB new and faster SSD.  I cloned the SSD existing to the new device, all good.

  However, I * physically cant just find the (existing) primary SSD drive *.  I took the back cover off, the two additional drive bays are here, I looked under the battery, CDROM, etc.  Clues?  I hope that if I just share, I'll be set.

  Otherwise, I could leave the existing 80 GB SSD in there * if I could figure out how to set the boot devices order *.  Currently, the BIOS allows me to internal versus external rather than network vs CDROM as classes start command, but not the individual devices.  Clues?

  Thank you!!!

  If you get the 3.0 mSATA adapter usb like this:

  http://www.Amazon.com/ZTC-enclosure-adapter-SuperSpeed-ZTC-EN002/DP/B00I4701O6/ref=sr_1_2?ie=UTF8&QID=1410222318&SR=8-2&keywords=USB+to+mSATA

  wost case you can use the mSATA as a very fast player. That's what I found myself doing with my WSSD, after I bought a 500 GB SSD for laptop. I could just NTO find any other product uses for it.

  If please do after back and let us know how it works because it's still a bit of a dunkelfeld for HP laptops.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• X 200 + Intel SSD 330 - HARD drive password / ATA defined but no prompt

  Hello

  I have a Lenovo X 200, that I just bought (in used condition), ridden by me with a 330 Intel SSD. I tried to set a password for the HARD drive with a supervisor password and a power on password and supervisor password and turn on the passwords seem to work as expected. All the passwords are identical at the moment. To test if the HARD drive password was really in fact, I removed the power on password. Now there is no prompt to normal startup. I tried to put the HARD drive password once again, but there is still no prompt.

  If it is relevant, I put the HARD drive password after formatting the drive and installing Windows, but as far as I can understand it, there is no reason this matter as long as the computer's BIOS and firmware of the Player shouldn't care/know what data is on the drive. In addition, no significant/important data on the drive at the moment, so don't worry giving advice that could make existing data on the disk unreadable.

  Best regards

  Eric

  OK, I think I just solved this problem by chance: after the electric bike computer (stop and remove the power cord and the battery for 10 seconds) the VT - x to work, the HARD drive password prompt now works as well. I hope this can help someone else with the same issue in the future.

• The distribution of applications and data between the disk SSD and HDD

  I recently installed an SSD in my Macbook Pro (late 2011) instead of the DVD player. I want to install OS X on it, by replacing the current OS X on the original hard disk, I will continue to use for storing files. How should I allocate its use in car? OS X and applications on the data files on the hard disk of 500 GB and SSD?

  The first series of instructions will partition and format the newly installed SSD disk then install OS X on it. The second block will help you configure OS X on the SSD with your data on the HARD drive.

  Clean Install of El Capitan on a new disc

  1. Restart the computer. Immediately after the chime, press Command + Option + R until a globe appears.
  2. The Utility Menu appears in 5 to 20 minutes. Be patient.
  3. Select disk utility, then click on the continue button.
  4. When loading disk utility, select the drive (generally, the entry Out-bumpy) in the list aside.
  5. Click the Partition tab in the main window of disk utility. A panel will fall.
  6. Set the GUID partition scheme.
  7. Define the type of Format Mac OS extended (journaled).
  8. Click on the apply button, then click the fact when it is active.
  9. Quit disk utility and re-enter the Utility Menu.
  10. Select reinstall OS X and click on the continue button.

  How to use an SSD with your HARD drive If you want to use an SSD as boot with your existing HARD disk drive, as the disk 'data', here is what you can do. After installing the SSD, you need to partition and format the SSD using disc utility disc. Then install OS X on the SSD. Once installed OSX boot from SSD. Startup disk preferences to set up the SSD as the boot volume. Open the preferences users and groups. Click the lock and authenticate you. Or CTRL - RIGHT click on your username account list in the sidebar and select Advanced Options in the context menu. You will see a field called "Home dir: ' on the far right, you will see an Edit button. Click on it. In the file dialog box, navigate to the location in house now located on the HARD disk (disk HARD/users/user_name /.) Select the folder, click the Open button. Restart the computer, as shown. When the computer starts, it will now use the home located on the HARD drive folder. Another more technical method involving the Terminal and the alias is discussed in depth here: using OS X with a SSD and HDD - Matt Gemmell configuration. It's my preferred approach because I can choose which records of the House, I want to on the HARD drive and I don't want to. For example, I like to keep Documents and library files on the SSD because I frequently access their content. Make sure that you keep the bootable system entirely on your HARD drive where you need it.

• Tecra R950 Intel SSD 520 and SSD set password = F4 BSOD after reactivation

  Hello
  follwing problem:
  Tecra R950 with Intel SSD and HDD/SSD series 520 passes together = always F4 BSOD after activation of the standby mode.
  OK with no password set.
  OK with Hibernate.
  Same problem with iastor and msahci driver.

  Any ideas? Think it's a problem with the bios. He goes down the ssd when wakeup, same cannot write a dump of memory (error 0xc0000010), the necessary cold start-up.
  Steve

  Hello

  Replace the SSD drive?
  As far as I know a lot of the Tecra R950 was equipped with a 500 GB HARD drive.

  I could be linked to the SSD drive

• Qosmio G30 and intel SSD - Windows 7

  Hi, I'm new to the forum

  I have a Qosmio G30 with Windows 7 32 bit - model G30 140 31F
  I bought an SSD intel 160 GB because of the promissed 250 MB/sg reading speed, because I need for video editing.
  I tried in Win Xp and now Windows 7 and it gets up to 120 MB/Sg

  I guess it s because of the drivers but I instal the drivers of storage can´t intel matrix any version of it. I tried a lot of them and with the compatibility mode too. It gives me an error saying I have not the minimum requirement.

  I have 4 GB of RAM and 2.0 Gzs centrino duo.
  I have install intel ssd toolbox and it does not recognize the intel SSD drive as a drive intel to improve the speed and other things.

  Please help me to get my speed in the car because it has to be and to have the TRIM option enable in order to have the life of my unit any longer.
  I also have the latest firmware in the drive.

  Thank you in advance.

  DANI

  PD: It coul be, perhaps, if our computer is a sata 150 controller in place a 300 sata controller? I don't know if the control is one of them in any case.

  Post edited by: Gazpachete

  Hi Gazpachete,

  I put t know how you managed now installing Windows, but Qosmio G30 is equipped with a SATA150 interface... This means that you will never get the 250 MB/s read speed of the HARD drive. You will get a maximum speed of 150 MB/s theoretically, but in most cases it of also a little slower.

  How did you check the current speed?
  But 120 MB/s is a good speed. You should be satisfied and it s faster than each computer portable HARD drive. ;)

• What is the oldest version of iTunes that can update an iPod and it runs on Intel Macs before?

  What is the oldest version of iTunes that can update an iPod and it runs on Intel Macs before?

  1. it depends on the iPod.

  2 iTunes 10.6.3 and earlier, will run on the PowerPC Mac.

  (138965)

• SSD has added to the system (y500) without one, and now it shows not SSD &amp; HDD

  So I bought the model without any SSD because I knew that I would like to upgrade, and I did exactly that.

  I installed the SSD slot msata and when I removed the HARD drive I managed to install windows 7 on SSD and it worked perfectly. So I stop to replace the hard drive, and when I start with both installed, it starts only from the HARD drive. I checked the BIOS and it only shows 1 or the other, but never both. If the HARD disk is installed, it only shows the HARD and never the SSD drive.

  I don't mind having to remove the HARD drive and use only the SSD for a boot device, but I feel I'm missing something simple as to why it does not detect the two.

  TIA

  QM

  So it was a setting I missed, I changed the boot of EUFI (or what ever Windows 8 uses) but missed the option next, changed inheritance (I think) and he sees the devices and the boots of the SSD.

  QM

• Envy 15 t q300: activate Windows after add SSD

  -Recently, I bought an mSATA SSD and add to my book. Now I want to reinstall Windows 10 in this SSD, my Windows 10 is now on the HARD drive. Windows will automatically activate once I installed windows SSD or what I can do to activate it? My settings shows that 10 Windows activation is enabled with a digital entitlement, what is?

  -J' have a the HP USB recovery order, can I use it to install Windows 8.1 (my laptop came with Win 8.1) to my SSD?

  -One last thing, in disk management, there 2 partitions hidden before Windows (C, healthy (recovery Partition) and healthy (EFI System Partition), which ones, and if I reinstall windows SSD my windows will work fine without these 2 partitions?) I deleted the recovery partition in my HARD using HP Recovery management disk but the healthy (recovery Partition) has not disappeared.

  Excuse me for my English, I hope understand you.

  Cloudjumper265 wrote:
  

  -Recently, I bought an mSATA SSD and add to my book. Now I want to reinstall Windows 10 in this SSD, my Windows 10 is now on the HARD drive. Windows will automatically activate once I installed windows SSD or what I can do to activate it? My settings shows that 10 Windows activation is enabled with a digital entitlement, what is?

  Older versions of Windows offer a product key to activate Windows (as it is written on a sticker COST or built-in BIOS/UEFI).

  Windows 10 offers another option, called right digital.

  Probably, you had older versions of Windows and free upgrade to win 10. In order to keep your old version keys active Windows, Microsoft enabled Windows 10 using the new method. Win 10 has been activated using Windows 7 or 8 button, then this key would have been valid for the 2 versions of Windows (which is impossible).

  More information about this new option:

  > http://windows.microsoft.com/en-us/windows-10/activation-in-windows-10

  > http://www.winbeta.org/news/digital-entitlement-a-new-method-of-activation-in-windows-10

  Maybe you can get temporary, the computer HARD disk and reinstall Windows on the SSD drive. Then you can insert the HDD tray in and when everything is ready, you can format the HARD drive and use it as an extra.

  If your computer came with Windows 8.1 or 7 preinstalled and later upgraded to Windows 10, you can use the recovery media to install the previous edition of Windows, and then upgrade to Windows 10

  Alternatively, you can try to clone your disk SSD using a software like Clonezilla:

  http://Clonezilla.org/

  > http://lifehacker.com/5837543/how-to-migrate-to-a-solid-state-drive-without-reinstalling-windows

• How can I enable AHCI in dv7 6199us? And install windows on a SSD?

  Hello!

  I got help.

  How can I enable AHCI in dv7 6199us? And install windows on a SSD?

  Intel based computers, like yours, are usually set to "RAID", which is a superset of "AHCI". Basically, if the BIOS won't let you choose between "IDE mode", "AHCI" and "RAID", leaving in the RAID led to you everything done "AHCI". In this case there is no need to activate the AHCI, as RAID will support an SSD anyway.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation