HP ENVY 17-2090nr 3D OVERHEATING AND FREEZING PROBLEM!

Similar Questions

• CPU is constantly overheating and freezing Satellite Pro A30

  Hi guys,.

  It seems that my CPU is constantly overheating and freezing of the PC.
  (is - what happens when a CPU is overheating?)
  Fans are turn eratically.
  The radiator seems warm enough but still palpable - even if it's just.

  As a trial, I would change my CPU clocked at 2.6 Ghz for
  a slower, cooler to see if it solves the problem.
  Can I just swap, or do I have to change something
  to ensure the new processor running at slower speed?
  Is there anyway I can say that the current of the processor to run
  at a slower speed?
  (I can not even installed on windows
  the PC hangs before the end)

  Thank you
  Ray.

  As noted by James energy saver controls the speed of the CPU and cooling method.
  You can change the settings and check if it will help.
  But a question; How much time do you use this laptop or how old is?
  Sometimes after long use, that dust and debris could have a bad influence on cooling and fan modules.
  For the most part a cleaning cooling module would avoid overheating. But I would not recommend to clean the laptop yourself if you have no experience.
  In my opinion a technician should do.

• Overheating and freezing Macbook

  Hello, I am owner of macbook pro mid-2009. Until a few days ago, I had almost never had any problems with it. About two weeks ago it started to overheat (approximately 80 C while that slowed down, usually it was about 50-60 and he crossed 70 just after I log in, without open all programs and goes higher) and sometimes he does not wake up after opening lid. Fans begin to turn, but beside that, nothing else happens, the screen remains black. Restart help but only for a moment. Also, while the adapter is plugged in, it sometimes does not load without the setting card (recently I noticed that my card has been damaged, but it still happens after replacing) or computer shows but after a few minutes suddenly crashes and battery 0% load. I tried to reset pram and smc a couple of times already, but I have not noticed any change. Apple hardware test does not work for me and I do not have original disk. Maybe it's the fault of the battery, it is seven years old and I'll replace it within a period of days, but I do not think that pile used everything it would cause. Do you have any ideas or suggestions on what to do? Thanks in advance for any help.

  Reinstalling the system has solved my problem. Something used most of my ram and the processor but was not in the activity monitor. I noticed that when I was working on windows via bootcamp and he worked at normal temperatures.

• Bridge CS6 Cache and freeze problems

  I downloaded Bridge CS6 and I wasn't able to use it yet. I'm on a MacBook Pro running 10.7.4 and whenever I run the Bridge application I get the following error:

  Bridge has encountered a problem and cannot read the cache. Please try to purge central cache in the Cache preferences to correct the situation.

  When I try to purge the bridge cache freezes. If I try to purge the cache I can't access all the files on my computer and it just hangs. I finally force leave her to get out. So far, Bridge CS6 has been completely unusable.

  Help, please.

  Thank you.

  When I go to ~Library/Caches/ there is a folder for com.adobe.bridge5 but he is not one for com.adobe.bridge6

  Your in the right folder. Follow the path you discovered yourself using the pref settings what Curt suggested

  CS6 ~library/caches/Adobe/Bridge and inherent should be 2 files:

  Cache plugin Adobe Bridge

  and the folder called Cache. Inherent should be 4 folders called ' 254 ', ' 1024', 'data' and 'full '.

  All of these files are the quality content respective to the thumb and preview as well as 100% of cache and database of bridge.

  Anyway, since you have not used bridge you have no amount concerned the cache and I would say you leave the two PS and bridge and manual to remove the two elements (Plug and folder called hidden at the end of the above mentioned Bridge CS6 path.

  (the two files are going to freshen up after a restart of the bridge).

  To be on save her side also visit in the same user Library Preferences folder and locate the file called "com.adobe.bridge5.plist" (Yes, that's 5 Bridge that comes with CS6 all Adobe applications have their own version number, they are presented in the same version of the Suite. CS6 has PS version 13 and Bridge version 5)

  also, drag this file to the trash.

  Then hold down the option (alt) key while from bridge and this should give you the option to reset the preferences as mentioned earlier in this thread.

  Choose Reset prefs, then try again.

• Pavilion dv7 7080el: big problems of overheating and bios problem

  I have this laptop for a few years, but earlier I use constantly and I see that much when heated work not reached an average of 65 °, but if you work with graphics or other temperature increases considerably, and sometimes when I go to reset the bios auto-recovery, finished the procedure, I have to turn it off and let it cool to be able to use it again as well as garlic this causes too much heat ruined even the battery that won't re - calibrate, but must be replaced, even if it is almost never used, so I would keep less software until the fan at will but cannot find compatible software and wish that the problem is solved for you because I think it's very serious the laptop not think that it is so plugged in but really many flaws

  Yours sincerely

  Max of Italy

  Hello

  Follow this thread for problems of heat http://support.hp.com/us-en/document/c01657439

• Satellite A300 has a bad power plug overheating easily and freezes a lot

  I got my Satellite A300 about 10 months ago. There always have a badly taken power.
  A little tugging or pulling up to my laptop, the power cable when falls.
  Is intended for it be loose? Does anyone else have this problem?
  I don't know if I should use my warranty to have it checked.

  I also overheating, blacken and freezing problems.

  Hello Teresah

  I wonder really after that 10 months you did nothing to solve this power plug the question.
  Why don't you contact the nearest Toshiba authorized service provider? I guess that laptop has guaranteed valid and these issues can be fixed for free.

  Be careful with this stuff power and contact the service as soon as possible. I don't know where you live but the complete list of all authorized Toshiba service providers you can find on the Toshiba support page under http://eu.computers.toshiba-europe.com > download & support > find an ASP.

  With the service guys, you can also discuss abut all other issues you mentioned in this announcement.
  I am also owners A300 and use my laptop about a year now. I use my laptop every day for my work and it runs more than 8 hours a day. So far, I did not notice any hardware or software problem. I ve defined the parameters of power management the balanced diet combined with the minimum level set in the cooling method option. Laptop runs quiet and, at the same time, has enough power for my daily activities as Internet, office applications and Skype.

  It is not easy to say what the problem with your laptop, but I recommend you contact the closest service Toshiba and to clarify these issues.

  Good luck.

• Pavilion g6 overheating and battery life

  I will have questions recently about the life of the battery of my laptop, I expected has something to do with the overheating constant, even if I clean the vents often enough and never overwork and only Dungeon it oh surfaces planes. I am at a loss at what could be wrong.

  Hello andrea9013,

  Welcome to the HP Forums! I hope you enjoy your experience!

  I understand that the computer is overheating and battery problems. I apologize for the inconvenience, but I'll do what I can to help you. First and foremost, please try the steps in this document: reduce the heat inside the PC to prevent overheating

  If these steps do not help, please provide the following information:

  1 the model number of the computer. If you need help to find this information, please see this site: find the model number of the computer

  2. the operating system. If you need help to find this information, please visit this site in order to determine the Windows operating system.

  3. have you installed new hardware on this computer, before the problem appeared?

  4. have you installed new software or drivers on this computer, before the problem appeared?

  Thank you for choosing the HP Forums. Have a great day!

  Mario

• E: HP HP Envy screen glitches and freezes when at a certain angle

  When my screen is directed through an angle of 90 degrees, my screen either glitch on (colors are reversed, etc.) or sometimes freeze while the screen becomes clearer until it whitens.  When this happens, the only way to fix the screen is to move the screen at a different angle.  Any ideas what is causing this problem and no solution?

  Hey @el1054,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked into your problem on your HP Envy laptop and having problems starting with lines on the screen. Here is a link to a document that will help you to troubleshoot the image on the screen flickers, has lines or distorted colors.

  You have connected a monitor to the laptop to check if it comes to that as well?

  If it does not appear on the screen, it could be a connection problem with the LCD screen or the inverter cable.

  Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  I'd be happy to help you if necessary. How can I find my model number or product number?

  Please let me know how it goes.

  Thank you.

• overheating and strange smell on Dv7 notebook

  I noticed that my system seems to be overheating and has a very peculiar smell. In fact, I thought he had a problem with our oven, so I kept in the basement to check it out.  However, it turns out my laptop being.  I used air jets to clean the vents, I cleaned the vacuum evacuation holes, but this thing continues to go into overdrive on the fan.  It blows constantly, and the laptop is very warm, if not hot, touch.  I also noticed that my system is very slow at this point.  So, I constantly have to shut it down.  Is there something I can do, or don't do that would fix this?

  This smell actually makes me cough, and my throat is sore.  I really need to find the source and fix it.  I use a LOT of my system.

  Thanks for your help, and here's my card on my system:

  HP Pavilion Dv7 core i7 2.20 GHz Intel

  Win 7 64 bit

  Radeon HD

  Similar issue on a dv6t, don't know if yours has this issue, might be worth checking

  http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/all-dv6t-I7-owners-if-you-have-poor-performance-click-here/m-p/1434637

• HP ENVY sleekbook 4-1025tx OVERHEATING!

  my HP ENVY sleekbook 4-1025tx overheating when the laptop is connected to the charger it has reached temperature max 85 cel. the laptop starts to cool down as soon as I unplug the charger until it reaches 50 degrees Celsius. can someone guide me on what causes this overheating.

  can someone say solution for this problem?

  P.S. I use the laptop at end of game

  Hello NaaniSurya,

  The laptop is overheating when you plug in the charger.

  Start the computer in safe mode by pressing F2 and select Safe mode, see if you still have the problem in safe mode.

  If you do its hardware and you will need to have the motherboard replaced.

  If you don't get the error, you can try updating the BIOS from HP.com.

  Here is a link to updates. You will need your product number.

  If updating the BIOS does not help. You can try a system restore. This will eliminate any software is causing the problem without affecting any of you files.

  Here is a link for a restoration of the system.

  Last resort, you may need to perform a restore. This will put the computer back to factory settings.

  Here is a link for a system recovery.

  I would like to know how everything goes.

• My iPhone my iPhone 5 guard by clicking on things at random, by clicking on the things im not clicking on and freeze momentarily. But the screen is not cracked

  My iPhone 5 guard by clicking on things at random, by clicking on the things im not clicking on and freeze momentarily. But the screen is not cracked

  You should go to the apple store and ask them to check it for you! You may have a faulty screen or faulty motherboard! in any case it is best to call or go to the apple store

• El Capitan slow and freezes.

  Hello

  Since Friday, June 3 of this year my iMac has been regularly making slower with the spinning beachball showing when I open an application and when playing iTunes, YouTube, Vimeo, VLC etc the system just freezes then starts again normally. I ran Intego Internet Security, run CleanMy Mac but also run the same Washing Machine, Intgeo reinstalled El Capitan, but its still slow and freezes. Also, the activity running monitor did not throw all the problems.

  No software has been downloaded or installed until this happened, just from appeared Friday and has gradually deteriorated since.  I bought the iMac in 2012 and its been a joy full every day since then. Even that by typing the text in the screen freezes then the rest of the sentence make it up a few seconds later. Also scroll, left and right mouse click can take up to 25 seconds to work, even if the mouse works no problem, if that's any help.

  My system is:

  iMac 27 inches (mid 2011)

  3.1 Ghz Inel Core i5

  16 GB at 1333 Mhz RAM

  1 TB HHD

  OS X Version of El Capitan 10.11.5

  Any assistance here for me would be really appreciated.

  First of all, get rid of all the software Intego and CleanMyMac.  They are not necessary and can only add to the problem of slow system and applications.  Do a Google search to find the developer instructions to uninstall.

  Also download and run Etrecheck.  Copy and paste the results in your response. Etrecheck is a diagnostic tool that has been developed by one of the most respected users here (and recommended by Apple's Support personnel) of the CSA to provide a snapshot of the system and help identify the most obvious culprits that can adversely affect the performance of a Mac.

  

• iMovie 10.1.2 Flash and freeze grayed out image

  Hello.

  I use iMovie 10.1.2 on my iMac.

  I want to remove the melted when my title appears.

  This option is grayed out if I right click and choose "add a freeze frame.

  If I go to the toolbar, edit-> flash and freeze frame, this option is grayed out too.

  Does anyone know a way around this?  Thank you very much.

  QuiSenFoux

  It seems that the only way is to put your title on green background, share it to present, to import to iMovie, add to the timeline above the clip, you want the title and using the green screen setup, you can then crop out the part melted each terminate at each end.   A lot of hassle for sure.

  Geoff.

• Constantly, Firefox crashes and freezes; uses 100% of the CPU during freezing.

  Almost spontaneously, Firefox would freeze and unresponsive. Meanwhile, every Firefox window is out bleached and do not meet any entry, and the Firefox process uses up to 100 percent of the CPU. All active content running at the time of the gel, if one continues to operate as usual (videos continue to play, web applications, provide audio notifications send as usual, the visuals are now not visible as browser windows are frozen.) The sound continues uninterrupted, however.)

  Freezing can occur at any time. Even when the user does not interact with Firefox, it can still freeze. Gel persists with all addons and plugins disabled.

  The freeze would last between a few seconds to a minute, and after freezing, Firefox takes always respond as if nothing happened. While it causes no significant losses, the gel is extremely annoying and can occur as often as once every ten minutes.

  The symptom of freezing is universal for all versions of firefox between 5 and 8.0a2.

  I had this problem since I upgraded from FF5 to 6.02. I got the dev of Aurora version installed, so I can also confirm that the problem occurs in several versions. Exactly as mentioned OP: CPU load max, gel application, even without opening all Web sites - once again, he froze immediately after starting when the browser cache cleaning.

  My profile was very old. I also disabled all Addons and Plugins, and the problem persisted. After that, I uninstalled Firefox but didn't keep my profile - no chance.

  Nevertheless, reinstall a complete, plus the withdrawal of all profile data (C:\users\me\AppData\Local\Mozilla and C:\users\me\AppData\Roaming\Mozilla - export your bookmarks first of course) solved the problem. Downside is, you must reinstall all the AddOns, and your settings and cookies went. But these gels were even more annoying, so my advice would be to create a new profile.

• Qosmio G40 - graphics card keeps overheating and crashing all at stake

  My nVidia 8600GT card in my laptop Qosmio G40 overheating guard and crashing when I m gaming.

  It works all the games that I put on it fine, but overheating then crashes and me kicks off the games I play m.
  Is it just because it s a laptop and it s inclined to do?

  I tried to increase the fan speed with riva tuner and precision, but no program allows me to access the utility of fan speed.
  I presume this is because it s a specific card from the laptop... I also can't find the driver for this card from nVidia updates.

  Help, please... James

  Hello!

  Are you using the Toshiba display driver? This is important because the pilot factory don t have protection against overheating and the graphics chip can be damaged.

  In addition, this could also be an overheating problem. If you need to clean your laptop with a jet of compressed air that you can buy at a local computer retailer.

  Last but not least, I would not try to change the speed of the fan or something else. This will be controlled automatically.

  Good bye