HP Envy 17-J023CL TS

Similar Questions

• Synaptics does not not on HP ENVY 15-J023CL NOTEBOOK PC

  Hello!

  Hello

  I have a hp laptop with the following properties:

  15.6 "ENVY 15-j023cl computer laptop computer Touchsmart with

  AMD elite Quad - Core 10 - 5750M accelerated processor, 8 GB memory,

  Touchscren, 1 TB hard drive and Windows 8.1

  SN: (personal information)

  Recently, thouchpad on my laptop does not work. I tried to solve the problem with the installation with synaptics update, but it did not work. Is he's all here know how fi this problem?

  Thank you

  This driver update: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-123980-1 & cc = in & dlc = in & lc = on & os = 4158 & product = 5448970 & sw_lang =

  Restart the unit. Open Control Panel-> mouse-> adjustment -: choose Synaptix LuxPad v1.3 on SMB port -: check the scroll box - apply-> OK-> Ok

• HP ENVY 15-j023cl Notebook PC: PC off (supposed overheating, no message appears) after a short period of time

  Hello

  A problem that has been doing worse and worse for me was that my PC turns off completely after a short period of time, now about 1 hour. I used to have the same problem, however, it turns off after 4-5 hours, and after that it is completely stopped for a few hours, he'll be back to normal. I read that dust accumulation can be a problem, although I see no dust in the vents. Do you advise me to open the computer and dust off the fan itself inside the computer with compressed air? Or are there other possibilities of dust collection problems will not fix?

  Before I provide documentation for troubleshooting @Pokeyster, I would like to take a moment to welcome you to the HP support community!

  I'll do my best to help you to solve the problems of closing you met on your HP ENVY 15 - j023cl Notebook PC.

  You asked if the dust can be a factor. The answer is absolutely! I saw him in the past when the reason for the complication was dust in Notepad. I recommend that you keep the free portable dust on a frequent basis.

  Please use the links in the questions below to troubleshoot and then re-post with answers to troubleshooting questions/results.

  Have you tried running in Safe Mode?

  Did you do a BIOS reset?

  Have you tried to do a disk defragment?

  Have you tried to do a Disk Cleanup?

  Please try to clean the events your Noteobok MNI

  Is the noisy fan or turn constantly?

  Is the hotter than normal PC?

  Have you tried tests to hardware failures?

  Here are a few documents for you that can help:

  • Computer hangs or freezes
  • Set the slow system performance.
  • Reduce the heat inside the PC to avoid overheating

  If this post helps you solve the problem, please pay to the front by clicking on the button accept as Solution , right of the thumbs up icon. You can click on the Thumbs up icon to show your appreciation for my efforts today!

  If you need assistance, I would be more than happy to continue to help. When you re - post, please provide me with the detailed results of the above troubleshooting.

  Thanks for joining in!

  Have a wonderful day!

• TouchSmart HP ENVY 17-j023cl: recovery stuck on 100%

  HP ENVY 17-j023cl TouchSmart

  I am trying to perform a recovery a few times, but I got stuck on this screen

  For a long time, the mouse is working, but I can press anything

  Hard drive is new and I run usb recovery, I know that's not the hard drive

  @Chai058

  It's just sad.  I'm sorry, that's happened.

  And I'm not sure what one should do; and I regret that no one answered - apparently nobody else knows precisely what to do, either.

  I guess at some point you will have to press the power button and turn off the laptop.  It can start later, it's 100%...

  Or - you could unplug the computer and carried over to a local home repair and see if something can be done with a system that is frozen and apparently will stay that way unless you intervene.

  If the computer is under warranty, you can contact HP and establish a contact / case - this can be useful if all goes on the side after you press the power button and you need help with the computer goes again:

  Contact HP support - USA-

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others to find Solutions and answers!

• HP TouchSmart ENVY 17-j023cl n: Add second hard drive to HP Envy

  I bought a second internal hard drive for my DESIRE to HP TouchSmart 17-j023cl N.  I need the specifications for the connection cable and fixing rubber.  Where can I get them?

  http://www.newmodeus.com

  The correct caddy and the cable for sale. I have personally used their product on a very similar model and can vouch.

• F.43 parameters to perform the downgrade of MS Windows 7

  What settings are optimal to allow a downgrade for MS Windows 7 on a laptop HP Envy 17 TouchSmart J023CL where the BIOS is F.43?

  WARNING *.

  HP does not recommend installing Windows 7 on a consumer computer comes with Windows 8, and it will support the installation of Windows 7. HP doesn't provide drivers for Windows 7 and the appropriate drivers are not available for the hardware in the computer. In addition, Windows 7 can not take in charge some of the hardware or software designed for the computer.

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  Regardless of the version of the BIOS, you will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "Configuration of the BIOS start-up secure" on the settings page similar to what is shown below, until you try to install Windows 7.

  

  or

  

  Also, as the hard drive is probably partitioned as TPG, you must start the computer by using the "UEFI - CD/DVD drive" or "UEFI - USB Flash drive" options in the boot menu "F9". If "UEFI - CD/DVD drive", "UEFI - USB Flash drive" or something to that effect does not exist in the start menu, please post a screenshot and/or make startup listed options.

  I suggest using Windows 7 SP1 for the best installation experience. If you need Windows SP1, see 'How to install Windows 7 without the disc' to download and create your own disc of Windows 7 SP1. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash drive. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.

  Here are the specifications of your TouchSmart from HP ENVY 17 - j023cl Notebook computer. Most of the 64 bit drivers Windows 7 since TouchSmart from HP ENVY 17 t-j100 CTO Notebook PC drivers of Quad Edition page should work. Thanks for posting to the Windows Device Manager "Hardware ID" (just the text string, please) for all remaining missing or unknown devices, as shown in the example below.

  

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• pictures 1.0.1 quit unexpectedly after printing on HP Envy 5640

  Hello

  I just bought a HP Envy 5640 printer.

  It works very well, but every time I have to print a photo in Photo 1.0.1 NICU OS X 10.10.5, Photos will be leaving after that print is sent to the printer.

  The photo prints fine, but needs pictures to be restarted every time.

  Does anyone have the same problem?

  Any solution?

  Thank you.

  I've not seen posted here - but since you are more than a year behind in updates, bug fixes and new features, you can see a verry old bug that has been fixed many years ago for people who follow to this day - unless he ia a clue right for you m = not updated I suggest you backup and update of OS X Sierra = and Photos 2.0 - this never can solve your problem

  LN

• I have a MacBook Pro, who hates contact my HP Envy 7640 printer all-in-one. Printing can take as long as 10 minutes! If it prints at all! Does anyone have similar problems?

  If I use my iPad to print a photo there is no problem, but if I use the Macbook for the same function, it will be either print it after a long period of time or he'll quit and say "Printing cancelled!" It seems that these problems started after the update. I am running El Capitan 10.11.6. In addition, when you use Hallmark Card Studio for Mac, as soon as I use two back, it will print the first side no problem and then he hangs up and ends by spit the paper without printing the second side! When I got to the printer, everything worked fine, but now...

  Maybe:

  e-with-OS-El-Capitan/td-p/5417344 http://h30434.www3.HP.com/T5/Printer-Software-and-drivers/HP-Envy-7640-compatibl

• How to print multiple copies on a HP Envy 5540

  I'm running OS X 10.7.5. on an iMac. I recently bought a HP Envy 5540, connected wireless printer. It fails to print more than one copy at a time. I see nothing in the software or instructions to change it. Help please!

  It is not clear, put you number of copies in the boxes of Copies and pages?

  Can try this...

  Startup HD, (operation key shift key down to start), run the disk utility in Applications > utilities, then highlight your reader, click on repair permissions.

  All devices which appeared already in your list of printers and faxes list should be added again after resetting the printing system.

  Reset the printing in Mac OS X 10.5.x system +++

  1. To use the reset function of printing under Mac OS System X 10.5.x, follow these steps:
  2. Choose System Preferences from the Apple menu.
  3. On the view menu, choose Printers and faxes .
  4. Control-click on the printer list on the left side of the window, then choose "Reset printing system" from the context menu. If you don't see the list of printers, Ctrl-click on the text "click on + to add a printer or fax" and select "reset printing system...". »
     
     As an alternative, if you have one or more printers from the list, you can click the "-" (deletion of printer).

  http://support.Apple.com/kb/ht1341

  Reset.

• ENVY 15: HP Support Solutions Framework Service - high CPU usage

  ENVY 15, 10 Windows version 1607

  CPU cycles was about 50% this morning and discovered that the HP Support Solutions Framework service was 40 + % permanently.   No problems so far with high utility usage.  Problem started not with the update of the birthday that was filled with 4 days and there are several reboots.

  At a chat session with HP support, but they couldn't help.

  I stopped running - task seems to restart every time I run the HP support assistant and continues with + 40% of CPU usage.

  Any suggestions please?   Y at - it an update utility that I have to download?

  Uninstall HP Support Assistant HP Support Framework in Control Panel > programs and features

  Then, reinstall the latest version of this link

  http://h18021.www1.HP.com/helpandsupport/HP-self-support.html

• HP ENVY m6-ar000 x 360: HP Envy m6-ar000 x 360 Convertible PC Wireless Connection Disconnects frequently

  Hey everybody,

  My PC Convertible HP ENVY m6-ar000 x 360 Wireless disconnects frequently.

  What can I do to fix this?

  Thank you

  Bill

  Hey Bill,.

  Following our normal wireless troubleshooting tool is the best way to solve almost all of the cases, but with this specific model with the AMD processor jump directly to make sure that update BIOS F.06 or most recent would be necessary.

  HP ENVY Ar000 M6 X 360 PC Convertible - WiFi disconnects frequently

  http://support.HP.com/lt-en/document/c05144863

• HP Envy 4500: HP Envy 4500 reset admin password

  I just bought a new HP Envy 4500 and impossible to access many functions through the online web interface IP address. It keeps to a secure https version and then pops up to ask for a name and a password.

  I tried using admin / admin and a lot of variation with no luck.

  Any suggestions or help on this?

  Thank you.

  Rainbow7000 nailed you. I'm in place and operate properly. Thank you for your quick response to my question.

  See you soon,.

• HP ENVY 7640: failed to update for windows 10

  I had this error on update, I have windows 10

  • Error of Hewlett-Packard - Company WSD multifunction printer, MFP, HP ENVY 7640 of material other series - Null Print - 0 x 80070103

  • Update driver HP for Fax - series HP ENVY 7640 - error 0 x 80070490

  Hi, Hello!

  Thanks for sharing this request in this forum.

  Please, try the following steps and hope this helps!

  1. Go to settings-> devices-> devices
  2. Click the Device Manager link at the bottom of the screen.
  3. Open "printers".
  4. Then uninstall/remove the "unknown device" if present.
  5. Restart Windows 10 update.

  Thank you and best regards,
  meg0316
  
  I work in HP, but I am personally.

• HP Envy 5640: Missing emails 'subject '.

  When I send an email from a Google account to the printer using the address @hpeprint.com, the body of the text of the email is printed, but the "subject" is not printed.

  Can you please help.

  Hello

  It is exepcted, the ePrint print mail attahed content or supported only the files, not the subject of the e-mail:

  Type a subject in the subject line. An empty e-mail subject line can cause the HP ePrint Server cancel the print job.
  
  E-mail subject lines do not print.

  http://support.HP.com/us-en/product/HP-envy-5600-e-all-in-one-printer-series/6583033/model/6583034/document/c03721293/

  Kind regards

  Shlomi

• 4524 ENVY: Envy 4524 habit of scanning

  Hello

  I recently changed my ISP and they gave me a new router. I set the router upward and printers on wifi and everything works fine, except for scanning.

  The scanner works very well using a generic scanner software but is not a very user-friendly software. So I want to use the HP scanning software.

  When I open the HP Easy Scan it opens fine and the scanner is listed and presets are photo, graphics etc, but when I press 'analysis' it comes back with an error message 'Scanner reported an error' HP ENVY 4520 is currently unavailable. Please check if it is turned on and... »

  Any ideas please?

  Thank you very much

  Hello
  From the Applications folder or its subfolder HP, delete all existing scanning from HP and HP Easy Scan by moving it to the trash, and then empty the trash.
  
  Then install the latest HP Easy Scan below, it will be installed in the Applications folder:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_7_0.pkg
  
  If you experience additional problems, ensure that the latest version of the software is installed by following HP Easy Start below:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/applications/HP_Easy_Start.app.zip
  
  Finally, make sure that your drivers are up-to-date by clicking the Apple icon, select about this Mac and then press on software update.
  Click on the Bank on the menu bar, click Reload Page, click all update if an update is available.

  Finally, if the problem persists, try restarting your router by unplugging its power for a while, it allows up to 3 minutes to start.

  Once the internet connection returns, restart the Mac and the printer and look for difference ay.

  Kind regards
  Shlomi