HP Envy 17-k207na: problem with lan port even when installation of official drivers...

Similar Questions

• I have the ie3sh.exe problem on my laptop, can you tell me what I have to do and this causes a problem with LAN for internet

  I have the ie3sh.exe problem on my laptop, can you tell me what I need to do, and this causes a problem with LAN to the internet.  What happens on another laptop not this one.

  Hello

  ·        Which is exactly the problem that you face with iesh3.exe?

  ·        When you receive the error message that is related to iesh3.exe?

  ·        You did changes to the computer before the show?

  ·        This issue you are facing with internet?

  ·        What is the full error message that you receive?

  Method 1: I suggest you to run the Microsoft safety scanner to ensure that the system is free of infection by the virus:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Method 2:  I would say as you put the computer to boot and check which application is causing the problem:

  http://support.Microsoft.com/kb/929135

  Note: after a repair, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Post back with the required information so that we can help you further.

• I have problems with my Apple ID when you download applications, that it is said that your ID Apple has not yet been used in the iTunes Store

  I have problems with my Apple ID when you download applications, that it is said that your ID Apple has not yet been used in the iTunes Store

  What exactly is the problem? You are also being invited to review the account and enter payment details? If you did you are your details accepted - if they are, you should be able to remove them then.

• Problem with the Microsoft Office 2000 installation program & 2007 & 2010

  Recently used your windows

  Windows XP Professional SP3 integrated October 2012 (32 bit)

  I have a problem with the installation

  Microsoft Office 2000 Premium EN &

  

  Microsoft Office 2010 Professional FR more

  

  

  But MS Office 2003 no problem with him

  and when iam using win 7 32 any desk of installation nprmally

  MS Office 2000 & 2003 & 2007 & 2010 used and installation normally with no prpblems

  Please give me answer or solution

  Thank you

  Just a troubled life

  Have you tried to check and making sure that all the Windows updates were executed? Also you install this on an account with administrator privileges?

• Problems with clicking and scrolling when you are using the mouse in IE

  Separated from this thread.

  Original title:

  Problems with clicking and scrolling when you are using the mouse

  I have the same problem.  My touchscreen responds but my touchpad and mouse are unable to save a click in IE.  I need to reboot to rectify.  It seems to be more common when the laptop comes out of fashion 'sleep'.   I tried all the steps above, everything is up-to-date.

  Hello Fred,.

  Thanks for the reply.

  I appreciate your efforts to resolve the issue.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the hardware and devices Troubleshooter and check. Please follow these steps:

  a. press Windows + W keys, type Troubleshooting in the search box and press on Enter.
  b. click on 'show all' and then click 'hardware and devices'.
  c. click 'Next' and then follow the on-screen instructions.

  If this does not help, then use method 2.

  Method 2:
  Start your computer in safe mode and check the number.
  Refer to this article:
  Start settings for Windows (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Anyone who has a problem with the system crashes when importing using the new interface to import

  Anyone who has a problem with the system crashes when importing using the new interface to import

  Can specify you what Adobe program you use so that we do that your post is in the right forum?

• Hello. I have a problem with the payment process when trying to buy the plan of creative photography of Cloud (one year). the error is: there was a problem processing your order, please contact our Service team customer care for assistance. AfricaBa North

  Hello. I have a problem with the payment process when trying to buy the plan of creative photography of Cloud (one year).

  the error is: there was a problem processing your order, please contact our Service team customer care for assistance. Middle East & North AfricaBahrain: 80081097Egypt: 08000000447Jordan/Kuwait/Lebanon/Qatar/Yemen: English + 44 207 365 0735Jordan/Kuwait/Lebanon/Qatar/Yemen: Arabic/French + 44 203 564 4145Oman: 80077173Saudi Arabia: 8008446638Tunisia, the Morocco and the Algeria: + 33 United Arab Emirates 157324642United: 80004443085Commonthwealth of independent States (CIS): + 44 207 365 0735

  Help me please to solve this problem. I need my lightroom immediately)

  Hi mohamed,.

  Please see the link below to buy the plan of photography:

  Pricing plans and creative Cloud membership | Adobe Creative Cloud

  In case you still have question, please contact sales at Adobe team.

  Adobe Middle East and North Africa

  Kind regards

  Sheena

• Hello all: I have a problem with my Illustrator? When I export final work, the text that is does not, I can config it? I have try several times, but still cannot fix it.

  Hello all: I have a problem with my Illustrator? When I export final work, the text that is does not, I can config it? I have try several times, but still cannot fix it. inactiveforumnotifier Newsgroup_User Zoheir Illustrator

  What is the format of your final work? How are you viewing? What version of Illustrator do you use?

  Here are some common reasons why your type might be missing - is your type completely on the artboard and bleed?

  Is your type on a layer that is set up to print not? Is your white type and position it to overprint?

  

  

• Having a problem with the Muse crashing when opening a Web site I designed in Muse.

  Having a problem with the Muse crashing when opening a Web site I designed in Muse. You need to be able to access this site in order to update for my clients.

  [LASP/updateCaches] TypeError: Error #1009: cannot access a property or method of a null object reference.

  All adventures Rafting | Wenatchee Whitewater Rafting trips - two hours East of Seattle

  Could you please send us the .muse file to [email protected] as well as a link to this topic? If the file is larger than 20 MB, you can use a service like Adobe SendNow, Dropbox, WeTransfer, etc.. Thank you.

• HP Envy 15 1195eo problem of USB Ports!

  I am facing a problem with my usb ports on my HP Envy 15 1195eo. I tried a number of things to make them work, but nothing did. Basically, when I connect a usb device, it will connect, stay tuned for a very few seconds, then disconnect for a few seconds and then connect for a few seconds again, and he repeats like that of infinity. So I'd like prompting assistance works again!

  News of the computer:

  Model: HP Envy 15-1195eo

  OS: Windows 7 64-bit

  Hello again Unboxeremail.

  That solves the problem at the origin?  This can be useful information.

  I took a look inside the laptop and noticed three ports (2 ports standard right) USB and eSATA/USB port a combination on the left, what port is non-functional?  In addition, the image of the motherboard indicates that the USB ports are not on a panel separated from the motherboard so a connection problem is very unlikely here.

  

  Do you have a multimeter?  Check the USB port to see if the connection is down at random would check it like a hardware problem.
  
  If the problem persists after a new installation of Windows, then this indicates a hardware problem.  This laptop is guaranteed?  You can see here.  If it is under warranty, you should contact HP support and let them know about the issue. The number for US / Canadian customers is 1-800-474-6836.  If you are in another part of the world, you visit HP's Support around the world to find the coordinates for your region.

• Problems with LAN RJ45 Ethernet on Tecra A8 PTA83E link

  I experienced some problems with the onboard Intel PRO/1000 PL Ethernet adapter. The adapter in most cases works very well: it connects normally in 100 or 1000Mbps - full duplex - speed, depends on wich internetworking devices connected and the link has any problems.

  But, in some cases, with multiple Eth, the adapter devices involved the link at all, the Green LED on the right (link?) continually flashes with a delay of 2 seconds (0.5 "-1.5" wide) and the yellow on the left (traffic?) is always idle. On the other side of the Cat5e cable, the unit (now a Linksys WAG325N router) sign no link. There is NO cable problem.

  Windows (XP Pro, SP2) sometimes reports in the small icon of the LAN adapter on the traybar a driver connection established at different speeds (often 100 Mbit/s, but sometimes 1000Mbps!), but soon he returned to status "cable disconnected".

  I tried to upgrade the drivers directly from the pages of Support Intel because the support of Toshiba does not recognize my laptop (!), and because originally I did a downgrade to XP (I'm sorry, but I don't want to use the original MS Vista!), but nothing changes.

  The only way to establish a connection that I found is to manually reduce the speed (10 Mbps - full duplex) of XP driver advanced settings link. In this case, everything works, but a low speed.

  Can someone help me? Someone already noticed this problem?
  Thank you!
  Paolo

  Hello

  I m not very good if it isn't a cable delivers.
  Have you tried to connect the two devices using a crossover cable (cross cable)

  There are three different types of crosscable:
  -100BASE-TX-Ethernet 10BASE-T-und
  -100BASE-T4-Ethernet
  -Ethernet 1000BASE-T

  The difference is the use of pairs of crossed wires.

  However, the use of crossed cables is not necessary if you connect a router or switch device.
  But in case you want to connect two laptops, the crossover cable is required.

• Satellite C650 problem with USB ports

  Hello

  I have a problem with my laptop, with my USB ports.

  A few days ago, I plugged my mp3 to charge its battery. I did when system Windows began and after a few ports seconds has stopped working. They work for one to five minutes after starting my computer, but only after my laptop's turn off for a few hours at night for example.

  They work fine and all of a sudden we hear the sound of a disconnected device and usb ports turns off. I tried many solutions but nothing worked. I removed all the USB ports in Device Manager.

  I checked in the BIOS, but everything seems to be okay. I tried to disable the disconnection of usb ports to save energy, nothing. Tools that have been provided by Toshiba to check hardware see as usb ports work correctly. Only usbdview program sees as unknown device, I tried to uninstall it through this program but still nothing.

  You have an idea, what could happen? Or if there is no possibility to fix without service visit?
  I would appreciate your help.

  Hello

  Have you tested these ports USB plug a USB mouse or a USB keyboard?
  These devices work properly?

  I don t think you need a visit to the service.
  I think that it s just a software problem
  Given that the USB ports are controlled by the chipset, I would recommend reinstalling/updating the chipset driver

  The alternative is a bit drastic, I think about the recovery of the laptop...
  It might be possible that the registry has been confused upward or some 3rd party software preinstalled on the laptop could affect the USB ports.

  I remember that my USB ports do not work after installing iTunes.
  I had to reinstall the operating system once more to get the USB port work even more funny is that I installed iTunes once more and USB worked correctly

• Strange problem with LAN on Satellite P10 connection

  Since yesterday I get really annoying balloon popup (it appears at intervals a decade or less seconds:(qui dit: câble débranché, mais le réseau fonctionne très bien (avec quelques retards quand il montre)))
  I wonder is this a hardware in my laptop problem or a problem with the internet provider. I have Realtek RTL8139/810 x LAN card. I checked another cable and of the ToolTip always shows :(
  Help, please

  Post edited by: motomadness

  Hello Adam

  On this path, it is not easy to say anything. I recommend you test somewhere else to make sure if this problem occurs due to material.

• PROBLEM WITH USB PORT

  I HAD PROBLEM WITH MY (USB) PORTS... WHEN I CONNECT DEVICES WITH MY COMPUTER, IT SHOWS THAT THIS MOTTO IS NOT RECOGNIZABLE TRY SOME OTHER CONNECTION FEATURES... I CHECK MY DEVICE MANAGER AND HIS WATCH THAT THE DEVICES WORKED PROPERLY I WASN'T THE PROBLEM, IT IS... HELP PLZ

  Simple method is to unplug all your usb device, turn off your system (power off) press the power for 5 seconds (while it is turned off), then turn on your system. Leave the window and then try to connect your USB device one by one... Should be detected and installed, if necessary.

• Window vista xps 420 problem with USB ports.

  I have problems with window vista dell xps 420 machine, all USB ports are not recognized, unless the computer is restarted or rebooted. anyone has a suggestion.

  Hi Miguelsmith,

  1. When did you start to question?

  2. you remember to make changes to the computer recently?

  You can uninstall and reinstall all USB device manager entries and check if it helps.

  a. Click Start and typedevmgmt.msc and then click OK. Device Manager opens.

  b. expand Bus USB controllers.

  Note: You will need to scroll down to find this point.

  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.

  d. Repeat steps above for each controller USB is listed under Bus USB controllers.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  f. check the USB device to see if it works

  You can also consult the following article:

  Tips for solving problems of USB devices

  Hope this information is useful.