Unable to connect with desktop remotely

Similar Questions

• Can connect with desktop remotely all directions except via internet Windows XP to Windows 7

  I have a new computer with Windows 7 Pro to work I need with desktop remote access so that I can work from home and be with the family.  For years I used remote desktop connection from home using Win XP SP3 to my Win XP Pro SP3 computer at work.  I am able to connect my old WinXP computer work on my new Win 7 computer (locally).  I can connect from home computer Win XP Win XP computer via internet (DSL) to work.  I can connect from Windows 7 computer to work at Windows XP home computer over the internet (DSL).

  So, I have Setup port forwarding or modems DSL correctly, the IP addresses are correct, consistent remote desktop clients. Firewall exceptions are configured correctly.

  What is different.  The new computer with Windows 7 Pro has McAfee Internet Security all others running EAST of Kaspersky.  Win 7 computer is new.  Since I am on various possibilities of connections, changed listening port of 3389 on some computers, including the new Win7 computer (this should not be a problem that I'm able to connect locally).

  Disable the firewall (software Anti-anti-virus/IS) on both computers does not help. In any case, I can go to WinXP Pro to work on Win 7 computer to work locally.

  My thought is that there may some security policies, or maybe a protocol problem which is different with the new Windows 7 computer that does not have a connection outside the local network (via a public network).

  I also tried to set up a VPN connection integrated Microsoft: forwarded port 1723, the GRE protocol allowed to the DSL modem.  Tried all different scenarios between Win XP Home and Win 7 computer at work and cannot configure the VPN connection. I get error 678: the remote computer did not respond.

  I spent hundreds of discussions help/knowledge base and discussion review.  I have seen or followed all the instructions on the various sites of tech Web to configure VPN connections and Remote Desktop connections.

  Does anyone have an idea as to what could be the solution here?

  Hello

  Please post your request in the Microsoft TechNet forum, where experts on this platform can help you with the problem.

  Please see the link that will take you on the TechNet forums below:
   
  https://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Windows Media Center - not the initial download put in place data for guide "unable to connect to the remote server.

  Hello

  Looking for help on this one...

  I have a new install of windows 7 pro running, and I was not able to get the guide to download Windows Media Center.   I am up-to-date with all the updates and SP1 version running.   My video card drivers are also updated.

  I use HDHOMERUN PRIME equipment with cablecard and who receives a TV signal very well and I am able to view it in WMC.    I use Verizon FIOS and my zip code is 07452.    Before this computer, I ran the cablecard even with a ceton infinitv and had no problem Guide at all.

  It's just that I can't download the guide data.  Its just totally blank.   I receive the channels and view them, but there is NO data.      Whenever I run the TV setup the same question comes up.  Cannot download the initial configuration data due to the error of previous download.   As far as I know, there is NO error message when Windows installed... actually... I reinstalled windows completely and this has not solved the problem.    I tried to manually download the guide which did not help.   It... nothing happened when I turned 'on' and 'off' WMC in Control Panel to reinstall.  I even tried explore the ehome folder and remove the file db... but nothing is helping.

  I can't find a file mcupdate.exe light on my system - don't know if this is relevant.   When I looked in the event viewer here are some of the error messages that I see.

  Impossible to extract the EpgLineups (error: unable to connect to the remote server)
  Impossible to extract the MCEClientUX (error: unable to connect to the remote server)

  I'm starting to think it's a matter of windows.   Anyone have any ideas?

  Mark

  E-mail address is removed from the privacy *.

  On Tuesday, September 23, 2014 00:32:35 + 0000, Mark_Sap_70 wrote:
   
  > I'm starting to think it's a matter of windows.   Anyone have any ideas?
   
  See this thread
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/is-the-Media-Center-Guide-download-service-down/f0a5ae10-00ea-4635-9177-12074fa7ee81?msgId=87f3f3b5-A485-4c41-8f35-43a4e2a75d7c
   
   
   
  __________________________________________________________________________________________________
  Barb
  MVP Windows Entertainment and connected home
  My Blog - http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   

• Unable to connect with the Mac computer?

  Unable to connect with the Mac computer?

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -Run "Difficulty Host File" option https://helpx.adobe.com/creative-cloud/kb/cc-cleaner-tool-installation-problems.html

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

• Unable to connect to the Remote Agent of VMware Converter

  I'm trying to V2V an our old infrastructure of VMware 2.5.x our vSphere infrastructure W2K Server.

  I've done several servers of the old infrastructure without problem.

  On this particular server, however, fails with the error "Unable to connect to the Remote Agent of VMware Converter"

  The journal of the points below on the $ IFC share.

  [2011-01-14 12:32:40.008 'P2V' 4788 info] [ClientConnection, 101] Connection to IPC$ on 10.101.0.171 like 10.101.0.171\administrator
  [2011-01-14 12:33:10.086 'P2V' 4788 info] [, 0] SMB Manager: connection error for share [\\10.101.0.171\IPC$]: 1792

  [2011-01-14 12:33:10.086 'P2V' 4788 WARNING] [ClientConnection, 115] Unable to connect to IPC$ on 10.101.0.171. Reason: Error unspecified in the mechanism of the remote execution
  [2011-01-14 12:33:10.086 'P2V' 4788 info] [ClientConnection, 119] Renounce the attempt to connect to IPC$ on 10.101.0.171
  [2011-01-14 'P2V' 4788 error 12:33:10.086] [task, 295] Task failed: P2VError REMOTE_UFA_FIREWALLED (10.101.0.171)
  [2011-01-14 12:33:10.086 'P2V' 4788 verbose] [task, 339] The transition of InProgress asked congestive
  [2011-01-14 12:33:10.086 'P2V' 4788 verbose] [task, 388] Successful passage

  Any suggestions for a solution would be appreciated.

  It looks like maybe the firewall on the server. Install the converter directly on the machine you want to convert, or temporarily disable the firewall.

• ORA-17629: unable to connect to the remote database server

  Hello
  
  I have put Dataguard in place with primary and 1 physical standby for learning/test database:
  
  I do NOT plan the unloading of RMAN backups on the physics of the day before.
  
  Recorded the primary database with RMAN and when "resync catalog db_unique_name all;" is issued.
  I get the following error:
  ---------------------------------------------------------------------------------------------------------------------
  RMAN > catalog resync db_unique_name all;
  from full resynchronization of the recovery catalog
  full complete Resync
  resynchronization of data base with DB_UNIQUE_NAME ASTTESTB
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failed to db_unique_name resynchronization command at 28/09/2011 11:34:23
  ORA-17629: unable to connect to the remote database server
  ORA-17628: Oracle 17629 error returned by remote Oracle Server
  ------------------------------------------------------------------------------------------------------------------
  Configuration of RMAN for the main proceedings are the following:
  
  RMAN > show all to db_unique_name asttest;
  
  RMAN settings for database with db_unique_name ASTTEST are:
  CONFIGURE RETENTION POLICY TO RECOVERY OF 7-DAY WINDOW;
  CONFIGURE BACKUP OPTIMIZATION # by default
  SET UP DEFAULT DISK DEVICE TYPE; # by default
  CONFIGURE CONTROLFILE AUTOBACKUP # by default
  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO "%F" # by default
  SET UP THE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE; # by default
  CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default
  CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default
  CONFIGURE MAXSETSIZE TO UNLIMITED; # by default
  CONFIGURE ENCRYPTION OF DATABASE # by default
  CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default
  CONFIGURE COMPRESSION ALGORITHM 'BASIC' AND 'DEFAULT' LIBERATION OPTIMIZE FOR TRUE LOAD; # by default
  CONFIGURE DB Nom_unique "asttest" CONNECT IDENTIFIER ' ASTTEST. UMDNJ. EDU'; _
  CONFIGURE DB "Asttestb" of nom_unique CONNECT IDENTIFIER "asttestb"; _
  CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;
  CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' / opt/oracle/product/11.2.0/dbhome_1/dbs/snapcf_asttest.f'; # by default
  
  Configuration of RMAN for instance physical standby are:
  
  RMAN > show all to db_unique_name asttestb;
  
  RMAN settings for database with db_unique_name ASTTESTB are:
  CONFIGURE RETENTION POLICY TO RECOVERY OF 7-DAY WINDOW;
  CONFIGURE BACKUP OPTIMIZATION # by default
  SET UP DEFAULT DISK DEVICE TYPE; # by default
  CONFIGURE CONTROLFILE AUTOBACKUP ON;
  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO "%F" # by default
  SET UP THE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE; # by default
  CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default
  CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default
  CONFIGURE MAXSETSIZE TO UNLIMITED; # by default
  CONFIGURE ENCRYPTION OF DATABASE # by default
  CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default
  CONFIGURE COMPRESSION ALGORITHM 'BASIC' AND 'DEFAULT' LIBERATION OPTIMIZE FOR TRUE LOAD; # by default
  CONFIGURE DB Nom_unique "asttest" CONNECT IDENTIFIER ' ASTTEST. UMDNJ. EDU'; _
  CONFIGURE DB "Asttestb" of nom_unique CONNECT IDENTIFIER "asttestb"; _
  CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;
  CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' / opt/oracle/product/11.2.0/dbhome_1/dbs/snapcf_asttest.f'; # by default
  
  ----------------------------------------------------------------------------------------------------------------------
  
  When I tested missing missing datafile and control file scenario on the primary database, it worked (Advisor to recover data)
  
  However, missing datafile scenario does not work on the physics of the day before.
  Here are the steps I followed:
  ********************************************
  1 renamed a file of physical data - in standby mode:
  
  bash - $3.2 ls - ltr
  
  Total 107832
  
  -rw - r - 1 oracle oinstall 52429312 16 September 12:19 asttest_redo03.log
  
  -rw - r - 1 oracle oinstall 61874176 Sep 29 15:41 asttest_temp01.dbf
  
  -rw - r - 1 oracle oinstall 52436992 5 Oct 11:00 rmandg_data01.dbf
  
  bash - $3.2 mv rmandg_data01.dbf rmandg_data01.dbf_old
  
  bash - $3.2 ls - ltr
  
  Total 107832
  
  -rw - r - 1 oracle oinstall 52429312 16 September 12:19 asttest_redo03.log
  
  -rw - r - 1 oracle oinstall 61874176 Sep 29 15:41 asttest_temp01.dbf
  
  -rw - r - 1 oracle oinstall 52436992 5 Oct 11:00 rmandg_data01.dbf_old
  
  
  2. restore the datafile (find the data file # view v$ recover_file):
  RMAN > restore datafile 5;
  
  
  
  From restoration to 5 October 11
  
  Segmentation fault
  
  
  3. in spite of the error, published "recover datafile command.
  
  4 RMAN > recover datafile 5;
  
  
  
  From pick up to 5 October 11
  
  allocated channel: ORA_DISK_1
  
  channel ORA_DISK_1: SID = 10 type of device = DISK
  
  RMAN-00571: ===========================================================
  
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  
  RMAN-00571: ===========================================================
  
  RMAN-03002: failure of the command recover at 05/10/2011 12:00:40
  
  RMAN-06094: datafile 5 must be restored.
  
  
  5. manually copy the physical primary datafile - in standby mode, & then problem recover RMAN command:
  bash - $3.2 scp oracle@msudrainier:/ora03/oradata/asttest/rmandg_data01.dbf.
  
  rmandg_data01.dbf 100% 50 MB 16.7 MB/s 00:03
  
  bash - $3.2 ls - ltr
  
  Total 159096
  
  -rw - r - 1 oracle oinstall 52429312 16 September 12:19 asttest_redo03.log
  
  -rw - r - 1 oracle oinstall 61874176 Sep 29 15:41 asttest_temp01.dbf
  
  -rw - r - 1 oracle oinstall 52436992 5 Oct 11:49 rmandg_data01.dbf_old
  
  -rw - r - 1 oracle oinstall 52436992 5 Oct 12:01 rmandg_data01.dbf
  
  
  RMAN > recover datafile 5;
  
  
  
  From pick up to 5 October 11
  
  using channel ORA_DISK_1
  
  
  
  RMAN-00571: ===========================================================
  
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  
  RMAN-00571: ===========================================================
  
  RMAN-03002: failure of the command recover at 05/10/2011 12:01:59
  
  RMAN-06067: RECOVER the DATABASE required with a backup control file or created
  
  
  6. of course RMAN commands have failed to restore the missing data file;
  So I renamed the file to original and rebooted repeat services applies - this restore the data file and now the configuration state of the DG is normal.
  *********************************************************************************
  
  Not quite sure if I'm still he hands the right way or if the error above is related to RMAN not able to synchronize with the physics of the day before.
  
  The documentation I want to talk to is here (1 paragraph):
  
  [http://download.oracle.com/docs/cd/B28359_01/server.111/b28294/rman.htm#BAJDFBDD | http://download.oracle.com/docs/cd/B28359_01/server.111/b28294/rman.htm#BAJDFBDD]
  
  
  Any pointers/direction and advise is greatly appreciated.
  
  Best regards
  NK

  I got it!

  /home/oracle:STANDBY >$ORACLE_HOME/bin/rman target sys/ catalog /@rcatalog
  
  Recovery Manager: Release 11.2.0.1.0 - Production on Fri Oct 7 14:12:10 2011
  
  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.
  
  connected to target database: PRIMARY (DBID=1562898590, not open)
  connected to recovery catalog database
  
  RMAN> resync catalog from db_unique_name all;
  
  resyncing from database with DB_UNIQUE_NAME PRIMARY
  starting full resync of recovery catalog
  RMAN output not resynced for database with DB_UNIQUE_NAME PRIMARY
  full resync complete
  

  If the necessary connection string a target/sys and a catalogue

  RMAN target sys / catalog /@rcatalog

  I did my standby

  Will try the primary

  Best regards

  mseberg

  Work on both. Great question!

  connected to target database: PRIMARY (DBID=1562898590)
  connected to recovery catalog database
  
  RMAN> resync catalog from db_unique_name all;
  
  starting full resync of recovery catalog
  full resync complete
  
  resyncing from database with DB_UNIQUE_NAME STANDBY
  RMAN output not resynced for database with DB_UNIQUE_NAME STANDBY
  
  RMAN> 
  

  Published by: mseberg on October 7, 2011 14:16

  Thanks a ton for sticking to it. I'll add this little thing to my web site.

  Published by: mseberg on October 7, 2011 14:22

• Unable to connect with iTunes Store

  Apple tv sends the message unable to connect with iTunes Store

  Are you sing the correct settings of the location and the region

• Unable to connect with the PC tab

  I bought a Ubislate android 7 C + from Datawind, but unable to connect with the computer

  Burnersalvation,

  To provide the proper resolution, I would need more information on your side.

  1. which version of the operating system are you using?

  2. what happens when you try to connect to the tab?

  3. How do you connect tab to the computer?

  To connect to Android Ubislate to the computer, it may require some software to install on the computer provided by the manufacturer of the tab. Then I suggest you to contact the manufacturer of the tab to get help on this issue.

  Check out the link:

  http://www.ubislate.com/contact/index.html

  Hope this information helps. If you need more assistance or information on this question, reply to this post. I'll be happy to help you.

• After traveling with my laptop, I am unable to connect with my connection wireless home

  After traveling with my laptop, I am unable to connect with my connection Wireless at home.  What I am doing wrong?

  Hello

  ·         What operating system do you use?

  ·         You are able to connect through wired network?

  .         You get the error message?

  Follow the steps in troubleshooting from the link and check if that helps:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  If you use follow Windows XP KB article troubleshooting steps and check if it helps:

  How to troubleshoot wireless network connections in Windows XP

  http://support.Microsoft.com/kb/870702

  See also:

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Identify and resolve home network problems

  http://Windows.Microsoft.com/en-us/Windows7/identify-and-resolve-home-network-problems

• Unable to connect with my sony DCR-HC48

  Original title:

  my windows 7 unable to connect with my sony DCR-HC48, please help

  my windows 7 unable to connect with my sony DCR-HC48, please help

  Hello

  1. Do you have any pop up when you plug the Sony DCR-HC48 to your computer?
  2. What happens when you connect the camcorder?

  We can refer to this link and check if that helps.

  Please come back with details so that we can help you better.

• I have an Adobe Creative account and my payments come out every month; However, I am unable to connect with my new account or access programs I have installed; It only let's login me under my old account. Can someone help me solve this problem?

  I have an Adobe Creative account and my payments come out every month; However, I am unable to connect with my new account or access programs I have installed; It only let's login me under my old account. Can someone help me solve this problem?

  Hello

  I see that you have an adobe account with the same email with forums, however, I don't see no subscription under this account.

  If you can't change the email during indexing, see the steps below:

  The OOBE and rename it OOBE.old and then try to connect with the correct ID:

  Location: -.

  Windows C: \ directory users\ user account-App data-local-adobe \oobe

  MAC: Go / go to the folder / Application support / Adobe / oobe

  If nothing helps, please contact adobe support:

  Contact the customer service

• Can't export virtual machines: unable to connect to the remote server

  Hello

  I'm working on vSphere client 5.1 (vCenter Server 5.1). Trying to export a virtual machine for distribution model. When I go to file-> export the template OVF..., I get the following error message:

  Can't export virtual machines: unable to connect to the remote server

  Remote not sure what/who he is not able to connect to. If I connect vSphere Web Client and navigate to the same model (or all other models), under 'All the Actions of vCenter' I don't have an option to export to the model of the FVO. But if I use a VM machine instead of a virtual machine template, I have the ability to export to the OVF, but it is grayed out.

  Am I missing any customer authorization or plugin for vShpere?

  Discovered that vSphere server had some modifications made by HIM to resolve the violation POODLE. HE had to set the ip address of the machine where export OVF will be performed. Which allowed the connection to establish vsphere client and perform an export of the FVO.

• DOUBLE DB: ORA-17629: unable to connect to the remote database server

  [oracle@ora11g1 ~] $ export ORACLE_SID = sales
  [oracle@ora11g1 ~] $ rman target sys/sales@sales
  
  Recovery Manager: release 11.2.0.1.0 - Production Wed Jun 5 13:00:15 2013
  
  Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
  
  connected to target database: SALES (DBID = 690066655)
  
  RMAN > Connect auxiliary sys/salestby2@salestby2
  
  connected to the auxiliary database: SALES (not mounted)
  
  RMAN > CURRENT SPFILE DATABASE of TARGET duplicate FOR THE EVE OF the DATABASE
  2 > DB_NAME SET = 'sales '.
  3 > SET DB_UNIQUE_NAME = "salestby2".
  4 > control_files='/u02/oradata/salestby2/control01.ctl','/u02/oradata/salestby2/control02.ctl SET'
  5 > SET DB_FILE_NAME_CONVERT = "/ u02/oradata/sales /", "/ u02/oradata/salestby2 / '.
  6 > SET LOG_FILE_NAME_CONVERT = "/ u02/oradata/sales /", "/ u02/oradata/salestby2 / ';
  
  From duplicate Db 5 June 13
  using the control file of the target instead of recovery catalog database
  allocated channel: ORA_AUX_DISK_1
  channel ORA_AUX_DISK_1: SID = 20 type of device = DISK
  
  content of Script memory:
  {
  backup that copy reuse
  TargetFile ' / auxiliary format of the u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwsales
  ' / u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwsalestby2' targetfile
  ' / u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesales.ora' auxiliary format
  ' / u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesalestby2.ora';
  clone of SQL 'alter system set spfile = "/u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesalestby2.ora";
  }
  execution of Script memory
  
  From backup 5 June 13
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: SID = 58 type of device = DISK
  RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 05/06/2013 13:05:26
  ORA-17629: unable to connect to the remote database server
  ORA-17627: ORA-01017: name of user and password invalid. connection refused
  ORA-17629: unable to connect to the remote database server
  continue other job steps, not a not working will not re-run
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of Db in dual at 05/06/2013 13:05:27
  RMAN-03015: an error has occurred in the script stored memory Script
  RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 05/06/2013 13:05:27
  ORA-17629: unable to connect to the remote database server
  ORA-17627: ORA-01017: name of user and password invalid. connection refused
  ORA-17629: unable to connect to the remote database server

  Welcome to the oracle forums!

  Please take the time to go through [url https://forums.oracle.com/forums/ann.jspa?annID=1535] FAQ PAGE

  Always after 4 version oracle numbers and details of the OS.

  Post any request outside has put between.

    \
  

  Tags

  Mark your questions answers if you give the answer

  Password for the SYS user on primary and standby must be the same. Copy the master password for the backup server

  SCP $ORACLE_HOME/dbs/orapwv112 : /u01/app/oracle/product/11.2/dbs/orapwdupv112

• Unable to connect with SYS on DB server

  Dear Experts,
  I use 11g R2. Operating system is Windows
  I get error Ora-12560 "TNS PROTOCOL ADAPTER ERROR" during the SYS to my DB server connection. Windows services for DB and listener are started, but I am unable to connect with DB.
  
  Please help me.
  
  Thank you

  Ok

  Make sure that the services owned by group. and restart once

  and also
  You can try the command prompt?

  Go to the command prompt--->

  Set ORACLE_SID = prod
  sqlplus sys / * as sysdba
  startup

  post if no errors.

• Unable to connect with facebook (impossible to chat with FB friends)

  Hello

  I am unable to Chat with my facebook friend with my Skype, Previouslly I'm able to chat with my friends on facebook.

  Please understand this.

  I need to chat with my friend facebook with Skype (Correct)

  I'm not asking to chat with my facebook friend who happens in Skype (Incorrect)

  Hope you understand what I'm looking for?

  I tried all the possible solution given mention in this three threads:

  1. http://community.skype.com/t5/Windows-desktop-client/Facebook-connection-issues/td-p/1962633

  2. http://community.skype.com/t5/Mac/Skype-is-not-showing-online-Facebook-friends-version-5-5-0-2069/td...

  3. http://community.skype.com/t5/Windows-desktop-client/unable-to-connect-to-facebook-chat/m-p/4085274#...

  but I am unable to solve this problem. My facebook friends don't no projection in Skype and I'm using the latest version of Skype (http://prntscr.com/9dcn3d) .

  Same 'Facebook' is missing from the list of contacts: http://prntscr.com/9d2rey and also the http://prntscr.com/9d2rni discussion list

  About 3 months before I'm able to talk with my friend from facebook using my Skype and even if I am able to make the video call with them.

  I don't know what is happening, all of a sudden the features is missing from my Skype, this is really very important for me, I beg you to anyone if know the solution please answer on the subject with the solution.

  I think that Skype or Facebook removed that feature or maybe it's the bug. If this is a bug fix it please, if it is officially removed I asked please add to new most of the people looking for this.

  http://community.Skype.com/T5/Windows-desktop-client/Facebook-connection-issues/m-p/4222412#M389968