HP ENVY 4500: HP ENVY 4500 - number of pages per device

Similar Questions

• HP Envy 7640: Number of page overview

  I have been using HP Instant Ink since February 2015 program.  I started with the 100 page and 20 additional for $1.00.

  The first cycle (February-March), I used almost 300 additional (100 base + 156) pages, so I thought that I should go to the 300 page and 25 extra for the program of $1.00.

  Next month (March-April), I used 344 pages.  The first 300 were covered for basic costs. And 4 pages have been tagged Rollover.  40 extra pages loaded at 2 x $1.00 is $2.00.  I understand the extra cost, but I don't understand came 4 flipping pages.

  The months following (April-May), I used only 252 pages.  I thought that I had 48 pages to the reversal.

  The months following (May-June), I used only 127 pages.  I thought I had 173 pages to the reversal, giving me a balance of 221.

  Next month (Jun - Jly) I used only 170 pages.  I thought I had 130 pages to the reversal, giving me a new balance of 351.

  According to the "instant InkTerms of the HP Service", I realized that during the time I was on page 300 25 extra for the program of $1.00, I was allowed up to 300 pages of page flipping.  According to him, "the total number of Pages of Service Plan more rolling Pages that you have at your disposal under the Service in each month may not exceed twice the number Service Plan pages to which you are entitled under your Service Plan."  Me that lying 300 pages for the plan and 300 pages in rotation, for a total of 600 pages for these three months I had this level of plan.

  Because I realized that most of the time I had the top-level plan I did not nearly that many pages, I decided to return to the regime of 100 pages with 20 additional pages for $1.00.  I thought I had a balance of reversal of 351 pages.

  Next month (Jly-August), I used 304 pages.  The first 100 pages were the use of the base.  The next 100 were no page fresh working capital, bringing the balance of my rolling to 251.  And I was charged $6.00 for the next 104 pages.  I guess it was 5 x $1.00 for the first 100 pages and $ 1.00 for 4 pages.

  Even if the next cycle (August-September) is not yet completed, today I watched my story.  What I've seen, it's confusing.  So far, I've printed 145 pages.  The first 100 pages go against my use of the base.  But only 16 pages are listed as reversal.  And 29 pages are listed as additional.

  Why aren't a not 45 pages (16 + 29) rolling all?  I think I have up to 100 pages allowed to tread.  I think that at least 55 pages that print from now until the end of the cycle should go to front bearing I am charged for additional pages.  And I think that would bring the balance of my rolling up to 251 pages to use in the next cycle (100 for sept-Oct) and the other (100 for Oct - Nov) and the next (51 for (Nov - Dec).

  The instructions to include as much information as possible.  It sounds like a lot of details, but I'm confused.  Is my logic faulty?  Can someone explain to me?

  It's a bit complicated, I fit my replies to your message below.  Disclaimer - I don't use instant ink, but I find my 8620 Pro Officejet inside and I think I can answer all your questions.

  rlc0638 wrote:

  I have been using HP Instant Ink since February 2015 program.  I started with the 100 page and 20 additional for $1.00.

  The first cycle (February-March), I used almost 300 additional (100 base + 156) pages, so I thought that I should go to the 300 page and 25 extra for the program of $1.00.

  Next month (March-April), I used 344 pages.  The first 300 were covered for basic costs. And 4 pages have been tagged Rollover.  40 extra pages loaded at 2 x $1.00 is $2.00.  I understand the extra cost, but I don't understand came 4 flipping pages.

  Feb - Mar, you used 156 additional pages.  That would have been charged as 8 other sets of pages for $8, with additional 160.  You used 156 additional pages, leaving 4 pages to derail.

  The months following (April-May), I used only 252 pages.  I thought that I had 48 pages to the reversal.

  Yes.

  The months following (May-June), I used only 127 pages.  I thought I had 173 pages to the reversal, giving me a balance of 221.

  Yes.

  Next month (Jun - Jly) I used only 170 pages.  I thought I had 130 pages to the reversal, giving me a new balance of 351.

  No, the maximum bearing would be limited to 300 pages, making a total of 600 pages available.

  According to the "instant InkTerms of the HP Service", I realized that during the time I was on page 300 25 extra for the program of $1.00, I was allowed up to 300 pages of page flipping.  According to him, "the total number of Pages of Service Plan more rolling Pages that you have at your disposal under the Service in each month may not exceed twice the number Service Plan pages to which you are entitled under your Service Plan."  For me, this meant 300 pages for the plan and 300 pages in rotation, for a total of 600 pages for these three months I had this level of plan.

  Yes.

  Because I realized that most of the time I had the top-level plan I did not nearly that many pages, I decided to return to the regime of 100 pages with 20 additional pages for $1.00.  I thought I had a balance of reversal of 351 pages.

  Sorry, you are only allowed to drive on a full month pages.  When you change to 100 pages per month plan you could ride only 100 pages. Excess working capital pages are lost.

  Next month (Jly-August), I used 304 pages.  The first 100 pages were the use of the base.  The next 100 were no page fresh working capital, bringing the balance of my rolling to 251.  And I was charged $6.00 for the next 104 pages.  I guess it was 5 x $1.00 for the first 100 pages and $ 1.00 for 4 pages.

  Yes, except for that you used only 4 of 20 pages in the last block you would have 16 pages available to working capital.

  Even if the next cycle (August-September) is not yet completed, today I watched my story.  What I've seen, it's confusing.  So far, I've printed 145 pages.  The first 100 pages go against my use of the base.  But only 16 pages are listed as reversal.  And 29 pages are listed as additional.

  Why aren't a not 45 pages (16 + 29) rolling all?  I think I have up to 100 pages allowed to tread.  I think that at least 55 pages that print from now until the end of the cycle should go to front bearing I am charged for additional pages.  And I think that would bring the balance of my rolling up to 251 pages to use in the next cycle (100 for sept-Oct) and the other (100 for Oct - Nov) and the next (51 for (Nov - Dec).

  The instructions to include as much information as possible.  It sounds like a lot of details, but I'm confused.  Is my logic faulty?  Can someone explain to me?

  The above should clear up things, although probably not what you wanted to hear.  You can find more information on the page of instant ink here.

• printer Envy 5530: Instant ink page

  I got when I went to my Flash page of ink that he was telling me how many pages I print to this day and still, he says nothing, is there somewhere on the printer I get this info? Its been a few weeks, I have to wait longer? its not up to date?

  Hello @sassejan ,

  Welcome to the forums of HP.

  I understand that you fear that your instant ink account does not display the used pages.

  I would like to help.

  If you have not installed one of the welcome package ink cartridges, then the pages are not been saved.

  I mean, it's, you subscribed to instant ink but the program is not active.

  Ink does not get monitored and pages have not counted until the program is activated.

  If you have installed instant ink cartridges, you may have a communication problem.

  Simple network troubleshooting usually gets this problem.

  I can help you with this, but depending on how long the connection problem that has passed, this could lead to surpluses on the number of pages.

  So lets take a moment to see what you need to do.

  1 do you have instant cartridges installed in the printer?

  not - so don't worry about the number of pages until you do.

  Yes - tap web services (2) icon to see if there is a server connection error.

  

  Please contact our Cloud Services at 855-785-2777. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Opening hours:

  Monday-Friday 08:00 - 23:00, sat 09:00 - 20:00 -
  Monday-Friday 07:00 - 22:00, Saturday 08:00-19:00 - CST
  Monday-Friday 06:00 - 21:00, Saturday 07:00-18:00 - MST
  Mon - Fri, 05:00-20:00, Saturday 06:00-17:00 - PST.

• What is the maximum number of pages for a photo book

  Is there a maximum number of pages that can be used to make a photo book? I have one that I am trying to download from 88 pages, but it will not download. Thank you.

  100 pages is the Max - 20 min

  have you presented in the book preview? Saw a print project in Photos or iPhoto to avoid problems - Apple Support

  What is the exact reason that you can not download?

  LN

• Apple has a maximum number of pages allowed for the applications on the iPhone 6

  Gowing nuts w lack of applications on the iPhone screen 6. Now you wonder if Apple has a maximum number of pages screen, they offer to applications. For every missing application, I can go to the App Store and each one said OPEN next to him. I'm travelling internationally next week, I can't go to the App Store to open apps, I already have, they should all be visible on the screen

  11 pages. If you have more than 264 apps to group them into folders.

• HP PSC 2410-how to find the number of pages

  I bought a PSC 2410 opportunity and would like to know the total number of pages. Any ideas?

  Hi @jay2769,

  Thank you for your super fast response. Please see these links and print a self test page and check if it displays the number of pages in the printer.

  Link 1: http://support.hp.com/us-en/product/HP-PSC-2400-Photosmart-All-in-One-Printer-series/303752/model/303754/document/c00048606

  Link 2: http://support.hp.com/us-en/product/HP-PSC-2400-Photosmart-All-in-One-Printer-series/303752/model/303754/document/c00048607

  Link 3: http://support.hp.com/us-en/product/HP-PSC-2400-Photosmart-All-in-One-Printer-series/303752/model/303754/document/c02073861/

  As part of the Toolbox (link 3) under one of the tabs, you may find the number of pages for the printer.

  Please let me know how it goes.  To simply say thank you, for my efforts to help, please click the "Thumbs Up" button. If you need more assistance let me know and I will gladly do whatever I can to help. If it helps, please mark it as "acceptable Solution" as well.

  Please take care and have a nice week ahead.

• I want to buy an iBook. There are 2 different books with the same name, author, and the book cover. They are different number of pages with different prices. Specifically, all the light that we do not see. " How do you know that we purchase?

  I want to buy an iBook. There are 2 different books with the same name, author, and the book cover. They are different number of pages with different prices. Specifically, all the light that we do not see. " How do you know that we purchase?

  I would get one that has 4700 comments already.

• Where can I see the number of pages in a document I created

  Hello

  I don't know why I can't find the answer to this question via google or the Help menu, but it's here:

  In word, you can see the number of pages (and the page you) in the menu bar below for example... page 5 of 50 (15,000 words). This is not in the printed document - it's like the management role. Is there an equivalent of this information in the Pages?

  Hi Chameleon.

  On the left of the menu bar is a button in the view. Choose the number of words to show.

  

  This will appear at the bottom of the Pages window:

  

  Choose a view:

  

  See "number of Pages" Page, it seems that you need to put this information in a header or a footer (Insert menu).

  Kind regards

  Ian.

• Number of pages to query the printer?

  I would like to power read/control the news 'number of Total pages' of the printer (without having to print a test page). Is there a utility available for this?

  I am running Windows XP SP3, with a HP Photosmart 7280. (Great printer by the way!)

  Thank you

  TJ

  OK, simultaneously press the print Photos and red eye removal button and release them. The display shows "enter special key Combo". Now press the red eye removal, print Photos and remove red-eye once more. No, he's going to say 'Support' and your firmware version. Press the right arrow button until you see the menu information and press OK. Continue pressing the right arrow button until you see 'Meters' and press OK. This will show you the total number of pages.

• samples per channel and the number of samples per channel

  in my DAQ mode samples finished program, there are two screws: timing and read.vi DAQmx DAQmx.

  I have to set the parameter to "samples per channel" DAQmx timing.vi and 'number of samples per channel' on DAQmx read.vi... Is there a relationship between these two?

  My laser runs at 1 K Hz. I want to go to the wavelength, wait for a number of shooting lasers, read the data and move on to the next page...

  Thank you

  Lei

  In your case, the VI will acquire the lesser of either:

  The "samples per channel" that you have defined on the timing DAQmx VI

  -OR-

  The number of iterations of your for loop (N) times the 'number of samples per channel"that you have defined on the DAQmx read VI

  The "samples per Channel" VI DAQmx of timing for a finite acquisition dictates how many samples the DAQ hardware should acquire in it's onboard buffer before indicating that the acquisition is complete.  "The number of samples per Channel" on the read DAQmx VI dictates how many samples the DAQmx driver must return buffer on board the aircraft to your application.

  Let's say the "samples per channel" on the calendar DAQmx VI is set to 50.  Thus, the card will acquire 50 samples and place them in the edge of the buffer, then stops.  Suppose we have the 'number of samples per Channel"on the DAQmx reading VI the value 3 and what we call the VI in a loop For which runs 10 times.  Thus, every time the DAQmx lu VI is called, it will wait until there are at least 3 samples in the buffer, and then return these three.  We call the VI a total of 10 times, then we will answer 30 total samples.  Thus, the last 20 samples acquired the card remains in the buffer and are destroyed when the task is disabled.

  Now let's say that we increase the "number of samples per Channel" on our DAQmx Read VI at 10.  VI Read will wait until 10 or more samples are in the buffer, and then return these 10. Thus, we will be back all 50 samples map acquired by the 5th iteration of the loop For.  The 6th time we call him VI DAQmx Read it expires, because there will never be another 10 samples in the buffer, and the VI returns a warning.

  This clarifies things?

  The purpose of this behavior is to allow you to both set the total number of samples that the DAQ hardware will acquire and also control how much of these samples is returned whenever you call the DAQmx Read VI.

  Kind regards

• retrieve the number of page reference all children tab

  I want to search tab within a tab, which gives this condition

  1. There is a parent and an uncertain number of child tab tab

  2. each page of the parent tab was certainly a child tab

  3. each page of the parent tab has other types of controls

  My goal is to collect the number of page all children tab

  

  It seems from the class name property, type reference do not match

  I am also attaching the vi

  Thank you

  His salvation,

  It seems from the class name property, type reference do not match

  Yes.

  With "CtlsOnPage" property that you get "imprecise" reference that all possible types of controls are referenced here. After filtering the references you need (you need to correctly!) you should use "ToMoreSpecificReference" and convert the reference to a type of tab reference!

• How to abort Continuous Acquisition (which is set to acquire a constant number of samples per channel each iteration)?

  Hi all

  I would like to continuously acquire an input channel analog and, if necessary, be able to stop the acquisition as quickly as possible.

  I use a card NI USB-6289. I implemented a DAQmx (voltage) analog input task, set the clock sampling DAQmx 'continuous samples' and the rate required (IE 1000, which is 1 kHz). For the acquisition, I used a while loop with inside the DAQmx Read with Terminal 'number of samples per channel', wired (IE 1000). The while loop waits until 1000 samples are acquired and therefore continuously reads the channel in uniform batches of 1000 samples every second ticking. The while loop can be easily interrupted when the DAQmx has completed the acquisition of the lot being 1000 samples, but it takes the DAQmx finish their current task.

  My problem is how to stop the loop while the DAQmx Read lies in the middle to get 1000 samples WITHOUT delay all 1000 samples are received? Is it possible to interrupt the DAQmx Read?

  I could reduce "the number of samples per second", increasing the responsiveness of the while loop, but this is not the solution I prefer. I tried to destroy the task (outside the while loop), but that does not stop immediately the acquisition, Read DAQmx still finish acquire 1000 samples. I've included an example Subvi. When I was using a PCI card, I used a timed while loop with inside the DAQmx Read with Terminal 'number of samples per channel' wired-1 (= which means ' read everything in the buffer "). In this case, it was easy to stop the acquisition at any time: the timed, while the loop is abandoned and the acquisition has ceased immediately. But it does not work with an NI USB-6289 map (see thread http://forums.ni.com/ni/board/message?board.id=170&message.id=386509&query.id=438879#M386509) because of the different way the data are transferred to the PC.

  Thank you very much for your help!

  Have a great day,

  LucaQ

  Hi LucaQ,

  Your solutions are decrease of the number of samples, or record the time you want to stop and remove samples that have been acquired beyond this time. There is no other way to stop the actual reading out of the hardware store.

  Flash

• What is an effective way to way logarithmic bin data with a constant number of points per decade?

  Hi all

  I would like to clean a logarithmic field of PSD in binning and averaging so that I have a constant number of points per decade (say 10, just for the sake of argument). Generally, means simpler and cleaner, I can think about getting this is research in the table entering all points between the frequencies A and B, with an average of these points and assigning a frequency (A + B) / 2 of the new average bin. However, I cannot find how to access frequency information, I need to achieve this. To be more clear, I can imagine if I had two tables, one who holds the frequencies calculated from my stream of incoming data, and the other which held and the amplitude of each corresponding frequency, that I might look for clues in the frequency table with values between A and B, then the average of the values in the table of amplitude which lie between the indices back put them in a new table with a new array of corresponding frequency. The process is a little more general that just on average every ten points, to say, as the number of points per decade continues to grow. My main obstacle at the moment, however, is that the amplitudes of the voltage are a set of values that receive through the operation of PSD, while the part of the frequency of the wave seems to be a DBL continues single-valued. I hope I've explained that well enough for someone to shed some light on my problem. Also, if anyone has a suggestion for a better way to approach the problem please let me know - there must be a pretty simple answer there, but it's deceiving me right now. Thanks in advance for the help.

  -Alex

  Hello

  If I get you right. you have:

  a table with the frequencies

  a table with the corresponding values of amplitude

  Then you want to merge parts of the data by averaging on the specific frequency ranges. I think that there is no VI 1 solution, you will need to write this on your own ():

  I start to get the min/max of frequencies and then interpolate a scale from your needs (like logarythmic) mounting with the quantity of bins you want. This should be an array again.

  Next step is to browse the frequency table, check (the first and) the last value in the location wanted (stop the loop, return the index). This should end up with an array of index. [I guess that's where you can save some computation time most by smart]

  Finally, use these indices to browse the amplitude values and make your average. Should return an array of the length of your array of locations.

  Ground in color fantasies and enjoy.

  Just what you intend to do?

• NI-VISA takes a unique I.D. number for each USB device?

  Hi all

  I'm relatively new to LabVIEW and VISA Toolbox.

  When you communicate with LabVIEW and a USB via VISA, VISA shoots a D.I. unique number for the USB device for each connection established?

  I have reference: http://www.ni.com/white-paper/4713/en

  Kind regards

  Bryan

  Bryan,

  I don't understand what you're saying, so let me rephrase my answer and see that if this may help you - IF your device properly implements the USB standard and has a serial number, VISA uses this serial number.  If your device does not implement the USB standard correctly or if it does not have a serial number, VISA will do for you.

  If your device has a serial number, the VISA can be used to communicate with it.  There are routines that detect and identify VISA devices connected to your PC.

  JasonP

• ALL: Number of pages in HPConnected printer without ink instant

  I have printers located in our offices throughout the country and want to be able to see the current page count, or get an automatic count of the pages report sent to our main office through HPConnected email without having to put every machine on the instant ink.

  Is it possible to see a number of pages by HP connected without having instant ink turned on?

  Hey @DelAssist,

  Welcome to the Forums of HP's Support.

  I understand that you wonder if it would be possible to check the page account using HP connected without registering in the instant the ink program. As communication page account is for tracking and billing, it is not possible to use this feature without being registered or handwritten no instant printers.

  If you are wanting to remotely track the total page counter and have a VPN, you can enter the IP address of the printer to access the printer's built-in web server and check how many total pages there. You can also have a printer print a self-test report or State and will show total number of pages in the printer.

  Please let me know if that answers your question or resolve your problem. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.