Troubleshooting-new HP with Windows 7 spectrum XT, does not connect to the WiFi at home?

Similar Questions

• Problem with Windows Fax and Scan does not connect to the Internal Modem

  Just got a new Acer Aspire 5542-5416 computer laptop with Windows 7 64 bit Home Premium, 4 GB of Ram and a 320 GB hard drive. It has a 56 k modem integrated fax of like the old days, but I can't make it work. The laptop did not come with the Windows CD.

  If I open the program Windows Fax and Scan, it is not able to connect to the modem. Basically, if I click on tools > fax accounts > Add..., I get a box with 2 choices: to connect to a fax modem or connect to a fax on my network server. When I want to connect a fax modem I get a message that says: an error has occurred. Please, try the operation again later or contact your administrator. It allows me to do this then just clock OK and them I'm right where I started.

  While in Windows Fax and Scan, if I click on tools > fax settings... nothing happens. No menu settings or anything ever appears. Quite simply, the program does nothing. If I try tools > Fax Status Monitor... I get a box that says entrance exam status, ready to receive a fax. It has a blue progress bar as something takes over, but it gets about 1/100 to and never goes further or ends. There is no box, but there are 3 buttons: view details, answer call or cancel. If I hit details, I get an empty list. If I click on answer call I get an error that says that the fax service is not available.

  If I try tools > Options, general tab has only a single option box is checked: play a sound when come it to new messages. If I try to print a Word or PDF file to a fax using Fax in the printer list, I get the same box with 2 choices: to connect to a fax modem or connect to a fax on my network server, but I get the same error message: an error has occurred. Please, try the operation again later or contact your administrator.

  I've searched the Internet high and low for a solution but no luck. There is a lot of discussion about this problem, but none of the solutions work for me. If I go to Device Manager, the modem is working properly and if I click on the Modem query on the Diagnostics tab, it seems to be able to communicate with the modem very well. I tried to roll back the driver and updated again and still no luck, same problem. If I go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Fax\Accounts in the registry, there is no subkeys under the folder accounts I can delete.

  Has anyone else had a similar problem? Is there any solution for this? I did a Windows Update last night and has not yet solve it. Thank you.

  Sorry about that.

  Here is the link:

  http://social.msdn.Microsoft.com/forums/en-us/windowscompatibility/thread/c75ae899-D05B-411D-a7f2-00fdd33b8589/

• HP Deskjet 3055 A does not connect to the WIFI with security

  I'm trying to configure a Deskjet 3055 A on my DD - WRT router.  I am a highly qualified network engineer, so I don't know 100% what I'm doing.

  First, DD - WRT supports WPS connection, because these are very precarious.  This means that my only way to connect the pritner to my home network is to connect to my PC and use the Setup utility (downloaded from your page drivers) I use the 28.8 version.

  My router supports the 2.4 and 5 GHz and I know the printer is only 2.4 GHz.  I disabled completely the 5 GHz network in order to connect the printer, even though it shouldn't have any effect.

  I restarted my router and reset the printers wireless network using its integrated control panel.

  In any case, after a shameful 2 hours troubleshooting, I did discover that the printer WILL NOT CONNECT to the WIFI network if any security is applied against it.  It works 100% fine with open security however, it is totally unacceptable.

  I tried both WPA Personal and WPA2 Personal, both with the same effect.

  For reasons to try, I added also the printer to my network WIFI open and tried to manually change the setting WIFI via webinterface of printers, however, whenever I try and access the wireless configuration wizard, I simply get an error message saying "Internal system error" - eventually I managed to work around this another bug that has been there for years (see http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Internal-System-Error-prevents-access-t...

  After installing printers web interface WIFI, the problem is always the same and it does not connect.

  HP, we were in the order of 2500 of these printers for users of our remote site.  If you don't come to the top with a quick solution/bug fixed, consider the lost business!

  Concerning

  Ian

  After playing well, I managed to find a solution for this!

  For all users who are unable to find a solution by using the other methods, here's what to do.

  Change your local network to open the safe but note your WIFI settings for your default installation.

  Connect the printer to the open network the HP software (via USB cable)

  Go to the URL of the printer, but make sure that you connect through HTTPS - if you get an internal system error, keep refreshing until it works (WHAT A JOKE!)

  Click on 'Network', then click 'Advanced' on the left.

  Enter the network settings as they need to be secured.

  Downstairs, check "in an infrastructure network, use 802. 11b / g behavior (assuming that your assisted supports g, otherwise use the b only option), then click on apply.

  Turn on your wireless security, on your router and then the printer should connect!

  I am really confused as to why this is not automatically enabled, if the printer is not working with security on a Wireless N network wireless, then have this as the default!

  HP - feel free to thank me in this post!

• Windows Media Player says does not connect to the internet.

  I keep trying to get the media guide and open my information center for my songs and Media Player says that its work offline.  I went and checked to make sure that work offline mode has not been verified and is not, and I even checked and unchecked it.

  Hi tinytim32927,

  1. what version of Windows Media Player?
  2. don't you make changes before the show?

  Try these steps and check the result.
  a. start Internet Explorer.
  b. click on the Tools menu and then click Internet Options.
  c. click on the Connections tab.
  d. under numbering and VPN settings, click the broadband connection, click settings and then click on automatically detect settings.
  e. click OK.
  f. check if the problem persists.

  See programs Internet in Windows XP can not connect to Internet

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 8 Mail App does not connect to the Outlook account

  Recently downloaded and installed Win8, no obvious problems so far.

  I want to set up my "Mail" app to get the mail on my outlook.com account. However, every time I get back the address email + password who logs me in me oriented web Outlook.com account, he said 'we could not find settings, please provide more information' and asks the domain names and the server.
  I don't know where to go from here, I have to provide some servers to connect to my outlook.com account or is there something else, I'm missing?
  My outlook.com account is configured to receive emails from other pop account. He receives these fines in the Inbox, no apparent problems.

  I discovered the root of the problem and fixed it (I suspect it's what Mark Bu said, but in a different way!)

  My outlook.com account is an account that is only associated with my windows user account, based on my own e-mail account as a connection made by myself in order to use integrated Ms. There is no outlook or hotmail related account. Despite this, I use outlook.com to receive e-mail from my other Inbox via pop and "receive mail from other accounts".
  Trying to connect to outlook.com fine online works, try with mail app fails with this, even if it's a known workaround solution to get pop mail on the win8 Mailer application.
  My solution was to simply go to 'rename the account' to outlook.com and create an e-mail address for microsoft based 'real' (@outlook.com) and migrate my windows account for this. Post instantly connected without problem, and my redirect pop still works.
  Pity that couldn't stop time on the chat line for microsoft technology, it just kept saying 'call your provider of domain for more details'. It could have been resolved in 30 seconds he said "you need a real Microsoft based outlook.com e-mail use it»

• How to do a system restore with windows 8. my mouse is not working but the keyboard works

  How to do a system restore with windows 8. my mouse does not work but the keyboard works.

  I've updated some drivers and now my mouse does not work

  Press the Windows key and press 'R '. Type "appwiz.cpl" without the quotes in the box run. Use the arrow keys to scroll down for updated drivers. When the driver is highlighted Press 'enter '. Use the arrow keys to select Yes in the uninstall confirmation dialog box. Restart the computer.

  You can run the restoration of the system from a command prompt if you are unable to uninstall the drivers. Press the Windows key and 'X', use the arrow keys to select the type of command (Admin) line "rstrui.exe" without the quotes. Use the arrow keys to navigate the windows system restore.

  Jim

• I have a problem I bought the collection master in 2012 for Mac just got a new computer with Windows 10 and I do not know how to download and install master collection on my new computer, can someone help me?

  I have a problem I bought the collection master in 2012 for Mac just got a new computer with Windows 10 and I do not know how to download and install master collection on my new computer, can someone help me?

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  Problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  On the Pro iPad, tap settings > general > reset > reset network settings

  You will need to re enter your Wi - Fi password.

  Then try to connect to your Wi - Fi network.

  If this does not help, more available in this support article suggestions > If your iPhone, iPad or iPod touch connects to a Wi-Fi network

• I have a laptop with Windows XP that show an icon connected to the internet, but I can't access the internet.

  Hello

  I have recently setup a wireless connection from my laptop on Windows 7 works very well. but I have a laptop with windows xp that show an icon connected to the internet, but I can't access the internet can you please help me.
  Thank you
  original title: wireless internet

  Do you receive kb from the internet source or is it local only, and when trying to access the page host does upward with the site not found or 404 error, have you tried to repair the connection, it could be your antivirus protection is blocking the signal.

• I just installed a new router and now my desktop running Windows XP computer does not connect to the internet.

  Hello

  I just installed a new router and now my desktop running xp computer does not connect to the internet. I know that it is not the router because I plugged the cable into my laptop running 7 and it works fine. When I try to dhcp I get 169..., when I put manually the IP just get no access to the internet and can not ping to the router address. I tried to run the net work Assistant, emptied my dns, disabled all firewals, still nothing.
  Any suggestions?
  original title: connectivity Limeted

  The zero configuration utility works very well. But it is a desktop computer and on cable. All other wired and wireless PC in the office is working well, then it's definitely this PC. He came out of nowhere, I install a network printer on the PC but that's all.

  Your messages are a bit terse, but if I understand correctly

  • You have a router connected to the Internet and multiple computers connected to the router, some Ethernet cable and others by wireless.
  • All but one of these computers can reach successfully from the Internet via the router.
  • A computer that can't browse the Internet is connected to the router via an Ethernet cable.
  • You disconnected the cable between the router and the desktop problem and connected it to a Windows 7 laptop and the laptop connected to the Internet via the router.
  • You haven't seen any error message (except, perhaps, a message on "Limited or no connectivity").
  • You have installed Windows XP Service Pack 3 (or at least Service Pack 2)

  Assuming that all the foregoing is an accurate summary of the situation, I suggest that you do the following:

  Open a command prompt window (start > run > cmd > OK)
  Type the following lines and press ENTER after each line

  Netsh reset winsock catalog
  netsh int ip reset c:\resetlog.txt

  Close the command prompt window and restart the computer.

• My HP shows it is connected to the new router, but does not connect to the internet. How should I do?

  I have a HP G60 Notebook PC with Windows Vista Home Premium, it is about 4 years old. I recently got a new Cisco Linksys E1500 wireless router, which is connected to my home computer. My laptop shows that it is connected to the home network, but it does not connect to the internet. Other laptops in the House are able to connect to the network and to the internet. Mine seems to be the only one not working do not. Why it is not working? What should I do about it?

  I ran the network diagnostics. It is said "a problem with you network router or modem broadband could prevent an internet connection." I have disconnected these two and tried again. It did not work! I have also connected my laptop directly on the modem and it does not always connect to the internet. I tried to reset the network card. My IP settings are set to automatic.

  My internet connection was not a problem before last week (when I got a new router). What is the problem with my computer? Help, please!

  Hello:

  If you have an Atheros wireless adapter in your PC and you have not updated the driver, I recommend that you install it.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-99392-1&mode=3

  Wireless adapters Atheros with former pilots, dislikes the new Linksys routers.

  If you have an Atheros wireless card, and your wireless driver is more than 2 years, I am very confident that this will solve your connection problem.

  Paul

• I installed a new router (Netgear N300) wireless and my laptop is the only computer that does not connect to the internet.

  Connected to the new router, but locally only.

  Currently, I installed a new router (Netgear N300) wireless and my laptop is the only computer that does not connect to the internet. The small icon to the left of my screen says only: ACCESS: LOCAL ONLY.
  BASICALLY,.

  I have Windows Vista Home Premium, notebook Compaq (Presario CQ60 to be exact)

  I can connect if I use a cable, but its disadvantages.

  I can connect wirelessly with my PC and Ipad. and Internet access.

  I TRIED:
  Various patches microsoft such as resetting TCP, safe mode with network, reset the router. »

  Thank you in advance and we hope you can answer this soon!

  I use an Atheros AR5007 802. 11 b / g WiFi Adapter(Compaq laptop) for the moment so this is useful. Thanks again!
  Someone suggested that I update my wireless driver. I am open to this idea, if anyone can find a safe and legal site with the download.

  Hi Bryyaan11,

  You can check out the link to HP support and try to download the drivers for your wireless card updated:

  Support HP & drivers

  For more information, you can also consult the following article:

  Updated a hardware driver that is not working properly

  You can also check the following items and try the steps:

  Windows wireless and wired network connection problems

  Solve problems, find wireless networks

  Hope this information is useful.

• Laptop does not connect to the internet, office. Both use the same router. Tried troubleshooting, does not. Help!

  I have a desktop computer and a laptop. Both use the same router. The laptop does not connect to the network, but the office has no problem. My wireless adapter on the laptop is on, I tried troubleshooting. I tried to turn it off for 30 seconds then restart him. But nothing is resolved the problem. Any ideas would be helpful! Thank you

  Hello

  Maybe this can help.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  
  

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Start the virtual machine and wait for WF, does not connect to the computer virtual for Vds (Windows 2008 R2)

  Hello

  See a strange problem with only a Windows 2008 R2 model. When you use the built-in function "Start VM and wait" workflow to start a virtual machine (after conversion from a template either manually, or through workflow) NIC of the virtual machine (I tried VMXNET3 and e1000 times) does not connect to the problem. Vds can be replicated in a different VCenter, so spreading the vds. I also created several models of Windows 2008 r2 and all have this problem.

  If the model is converted and started outside VRO, it gets an IP from and is connected to the VDS immediately

  Tried add/remove the NIC of the model

  Tried to move the comments on different hosts

  Tried to create a new template from scratch

  NOTE: Windows 2012 R2 doesn't have this problem in the same circles, the only constant is the Windows 2008 R2 being started by VRO.

  Anyone seen this before?

  I found this article and it fixed my problem VMware KB: registration or the deployment of a virtual computer model fails apparently a fix a problem in ESX 5.1, 5.5 (I used the option to get around and things are good)

• Dreamweaver (on Windows 7) does not connect to the server, IIS (v7) using "FTP over SSL/TLS...". »

  I am weather evauating to buy Dreamweaver CS6...

  Trial of Dreamweaver CS6 (on Windows 7) does not connect to the IIS server (v7) using "FTP over SSL/TLS (explicit encryption).  I have a NEW Godaddy SSL certificate installed on the IIS server.

  On the connection between States Dreamweaver: "server certificate expired or contains invalid data."

  I tried:

  -ALL Dreamweaver Server configuration options

  -L' use of multiple certificates (I tried 2048 and 4096-bit Godaddy SSL certificates)

  -Make sure the certificate "issued to the"domain name is my domain name. "

  I am able to connect without a problem with Filezilla, Filezilla equivalent affecting 'explicitly require FTP over TLS.  I can connect both using Microsoft Expression web.

  This has been discussed previously. I recommend reading my old thread for details:

  http://forums.Adobe.com/thread/889530

  But to make a long story short, Godaddy is incorrectly signed SSL certificates on shared servers.  The servers/ips/domains and the certificate do not match.  So DW and many other tools fail authenticate with Godaddy SSL connections.  Some users have stated that other tools FTP, such as Filezilla as you mentioned, bypass and automatically change your connection to insecurity, but DW is very picky.  Once you modify encryption against zero, the connection will be accepted.  Best solution is if you want a certificate SSL correctly signed move to another host because Godaddy refuses to admit that they are wrong with SSL certificates on their sites.  These warnings will appear also to your users if you have a store saying the SSL certificate does not match the domain/ip and this can make users checking in a very nervous showcase.