HP Envy 700-470na: changing the case of the HP Envy 700-470na.

Similar Questions

• Want 700-092d: how to change the order of boot SATA on HP Envy 700?

  I have received warnings that my first HARD drive (SATA0 - 1 TB) is a failure.  I have a second HARD drive (SATA1 - 2 TB) up and running which I've used for the backup.  He had a lot of free space, so I partitioned and downloaded and installed a new operating system of Windows 8.1 on this new partition.  (The original factory o/s the SATA0 was Windows 8, which I was later upgraded to Windows 8.1).

  Immediately after the installation of this new system, I was able to restart the computer using the new o/s of the new partition, which it redesignated as c drive.  Startup, I got a blue screen menu asking which drive I wanted to boot from and I chose a new.  It was working fine and I was reinstalling my software on the new drive and I restored all my files of personal data on the new Norton rescue disk.

  However, in order to re - install the software elements, such as Corel Graphics, MalwareBytes, and Nitro Pro, I had to go back into the old operating system in order to load the programs installed and uninstall/remove, so that I can continue to use my registration on the newly downloaded and installed versions on the new HARD drive.  After having done that, I tried to reboot to the new HARD drive, but I am unable to do so.  The computer starts in the old system each time and there is no possibility to choose between hard drives.

  I was trying to change the boot order in the BIOS, but I can't find any option to choose between different SATAs.  There is only an option to choose between USB, CD and hard drive.  I tried using the legacy startup option, and then selecting SATA1 as boot drive, but then it says that it cannot find an operating system.  I guess that's because I use Windows 8.1 loaded on a system UEFI/GPT partition and that is not compatible with the use a legacy boot waiting and MBR System.

  Help!  How can I go is the choice of the drives on startup (as he did the first time) or defaults to SATA1 as the computer boot drive?

  Do not install programs on the failed hard drive installation files. They could very well be corrupted and damaged the BCD store for the new operating system.

  Remove the original hard drive and the new drive on its SATA connector.

  Changing start secure legacy was a bad idea. This has been known to corrupt data ona hard drive and make it inaccessible.

  You may need to use utility Windows Diskpart to clean the hard disk, create a new partition and reinstall Windows 8.1 him.

  I guess your Norton backup is on an external drive.

  You can start a command line installer for Windows 8.1 that you used to install the OS on the new drive.

  The type of command in Diskpartline.

  At the prompt, type in the volume list.

  Now you should see the new hard drive in the volume list.

  Type select volume x, where x is the callsign for the new hard drive.

  Type own. Which will return the drive to the CRUDE State.

  Type in output. Who will leave the Diskpart utility.

  Type exit to exit the command line.

  Now you can use the Setup program to install Windows 8.1 on the hard drive, or you can use your HP recovery media that you created from the original hard disk to install Windows 8.

• HP envy 4500: direct printing without having to change the wifi to printer

  To print on a HP Envy 4500 from an Air iPad with iOS8, should I switch my network wifi to the printer whenever I want to print something?
  For example through my email, there are several emails, each with an attachment that I I want to print. I choose my network WiFi, open the email attachment, return to wifi-changing the settings of printer-go back to the document and print it. Wait for it to print. To return to the e-mail, I return to settings-wifi-changes in my next email open network. Then go through the process of return to the printer.
  There must be a simpler way to use "direct print", but when I try to print in the document, he says "no printer found AirPrint."
  Thanks in advance.

  Hello CdnCreekers,

  It seems to me that you print to the printer WiFi Direct printing option. There is an easier way...

  To begin with, I would turn off WiFi directly from the front panel of the printer > select direct WiFi, then turn it off.

  I assume you already have your printer connected to your wireless network, if that's the case, then you just need to print from your iPad. The iPad must be on the same network as the printer to use Apple's Airprint wireless.

  WiFi Direct is a great option for guests to use, but you don't need to have it on in order to print wirelessly on your printer.

• Envy 17: How to change the new answers to installation of PC

  I just got my new HP Envy 17 with 10 Pro 64 - bit Windows for the first time. He went through a series of first time, the Setup screens. Two screens will appear with the options of privacy settings with respect to sending any information to Microsoft. I wanted to turn off (disable) all options but accidentally went to the next with no option to go back screen. Setup continued on his own for several minutes and then finished.

  How can I go back and change the settings first time options?  I can re - run first installation?  Or y at - it another way to change these options?

  Thanks for your help!

  Hello: Please see the following link for more information:

  http://www.TechRepublic.com/article/Windows-10-violates-your-privacy-by-default-heres-how-you-can-protect-yourself/

  Just for the record, I had difficulties to define the privacy settings of Windows 10. Some of them seem to come back for me, so I use a free program called Spybot anti-Beacon. My PC W10 here, I chose all the blocks on the two pages of the vaccinations. Spybot gives you the opportunity to vaccinate on each boot, and I chose this option, just in case the MS updates affect the settings somehow.

• want to 700: Ho I change the name of the computer

  I want to change the name of the local computer - the user account administrator.  I can't find a way to do it without starting with the operating system.  Is it possible to change the name?

  @KarCha

  Your system - an are:

  Results for "want 700" (246)

  You can change the name of the computer:

  Control Panel > display icon > System > Advanced system settings >

  the computer name tab >

  Next to rename this computer or change its domain... name > click Edit

  NOTE:

  Generally, for home use, do not change the name of the Working Group.

  ===========================================================

  You cannot change the name of the built-in account"Administrator".

  To create an administrator account on the computer (in C:\Users\) home folder is named how you like - and still use your connection to Microsoft:

  • Create a LOCAL account on the computer
  • Once the account is created >
  • Change the account and change the type of administrator >
  • Log in to the new local account >
  • Windows key > settings > account > sign in with a Microsoft account

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• printers HP 4520 envy: envy hp 4520 change the default ink color

  How do I change default color black ink?

  Thank you

  Hey @jim23433,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I see you are trying to change the color of ink to your wish 4520 e - all - in - default printer. I can help you with that, but I do not understand what you are referring to.

  Are you trying to force the printer to print in black only? If this is the case then the 4520 enviously you can remove the color of the printer cartridge. That will force the printer to print something that must be in color and black.

  If you try to print a document on your Macintosh and it is the impression of a different color, then you can fix this by doing the following:

  1. On your Mac, click the icon of your Apple, go to System Preferences and printers and Scanners.
  2. Hold down the command key and click the picture of the printer on the left side.
  3. Click on reset printing system.
  4. Click on the button "+" in the lower left corner of the screen.
  5. Select your printer from the list.
  6. In the box next to click on Airprint and then select your printer.
  7. Click on Add.
  8. Try to print.

  This should allow you to print black on your Mac.

  If you encounter another problem then please provide me with more details and I'll be better able to help you.

  I hope this helps and I hope you have a wonderful evening!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.
  
  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• Can not change the brightness of the screen - HP ENVY 17 laptop

  After the upgrade to Windows 8.1, I have the problems below:

  -I can not change the brightness of the screen on my laptop

  -When I clicked "Contact technical support" on HP support assistant program, he showed an error "HP support assistant has stopped working"... and closed the program. I downloaded a new at HP, but the same problem occurred.

  My laptop PC info

  Product name: HP ENVY 17 Notebook PC

  Product number: A9P84UA #ABA

  Please instruct me how to fix it. Thank you.

  I posted the step by step guide here: http://www.tomshardware.com/forum/id-2748304/amd-intel-enduro-laptop-brightness-fix-win.html but if you are familiar with registry just search FeatureTestControl and see if the value is using f840 or f940 and replace it with ffff then restart your computer. should work now. But if you are still having the same problem trying to follow the steps on this post. see you soon!

• How to change the speed of the RAM on my HP Envy m6 - 1158ca?

  Hello

  I have a laptop of m6 - 1158ca HP Envy (Intel i7 3632QM @2. 2 GHz) running Windows 8 Pro 64 bit with 8 GB of RAM. Supposed to be 1600 MHz RAM speed, but I don't see that 800 MHz through a third-party tool (CPU - Z).

  Are there settings in the BIOS I have change to change this?

  Thank you
  Véronique

  N ° there is no option in BIOS OEM that allow you to change the speed of add-on memory or speed of the bus.

  It is an option that is present in passionate desktop motherboards.

  Computer Systemboards laptop OEM and microcomputers have less optional parameters.

  Best regards

  ERICO

• HP envy m6-K015dx: how to remove/reset password BIOS of HP envy m6-K015dx in order to change the boot order

  I'm trying to install a new copy of windows 10 but currently it does not show an option to boot from usb. There are only two options i.e. BONE Boot Manager, BOOT from the file of EFI. I need to go into BIOS to change the boot order, but it asks for administrator password.

  I don't remember set the BIOS password on my laptop, and yet I've tried some of the passwords mentioned on the forums but none of them worked. I can't remove CMOS battery, which is part of the solution, because it requires for me to disassemble the laptop.

  Please suggest me any solution that I have not been able to understand all other sources.

  Note: USB is made bootable and perectly to work on another pc.

  System information: -.

  HP envy m6-K015dx

  Windows 10

  Itkhan.

  When asked for the password enter 60862899

  REO

• J3Z14PA #ABG: is it possible to change the display on HP Envy 15 Q004TX Panel

  The laptop has initially complete 720 p. is it possible to change the Panel of slab IPS 1080 p? It's touchsmart

  and what is the display for q004tx part number?

  Kind regards

  Hello

  I don't know why your machine has full 720 p. Anyway, please try the 3rd page of manual, 47 of the following link:

  http://support.HP.com/us-en/product/HP-envy-15-notebook-PC-series/6936209/model/7169946/manuals/

  and expect to pay about $590 to the next shop for the part of the fist on the list:

  http://www.Amazon.com/HP-788475-001-15-6-inch-display/DP/B00PDD345C

  Kind regards.

• Update of cases in the structure of the case after having changed the 'Type of case.

  Hello

  After you change the "Type of business" (only one case has been deleted), I discovered that in cases of strcuture cases has become "damaged": case "named" have been changed to digital small (that is, 0, 1, 2, 3).

  Is there a way to den strcuture case?

  Thank you

  Pavel

  

  Right click on one of the enums greyed out and choose 'review and update of Type Def.  That should allow you to solve problems.

• programmatically change the range structure case

  I think I already know the answer to that, but I'll ask anyway. In the attached picture, is it possible to programmatically change the range of numbers used by the case?

  Tay

  I probably would solve the problem by program, for example as follows.

  Start by Ravens idea above and use a picture of the limits of the range, for example as described here.

• HP ENVY 17 - 1190 ca: change the envy 17 d by a recent new motherboar

  Change motherboar 17 d by a recent new envy.

  Hi, pleasssse please

  I want 17-1190 CA and the motherboard is damage (it was too hot).

  I want to change the motherboard, but I like to choose a new recent motherboard of all recent generations to envy 17 on the list.

  So, it's my questrion:

  What is the different models of the motherboard that is compatible with my hp envy 17 1190 ca?

  This is my original motherboard: 618859-001 HD5850 (it was too hot).

  After that I will make my choice.

  (I want to use the old laptop but can buy the new graphics chip, processor, motherboard, etc.)

  The warranty has already expired, I just need to replace the original motherboard.

  Thank you

  Hello:

  Manual: http://h10032.www1.hp.com/ctg/Manual/c02589673

  Go through the 20 Page of the manual.

  For the whole HD (that your laptop is built with), the motherboard system is unique and cannot be changed, display: HP part number 603771-001.

  Data sheet: http://support.hp.com/us-en/product/HP-ENVY-17-Notebook-PC-series/4256095/model/4308133/document/c02503072/

  I suggest only you clean vents off dust and debris with compressed air stream. If possible, try to change the fan cooler, clean & reapplying thermal paste.

  Concerning

  Visruth

• ENVY 5540 All - In - One Printer: how to change the password want TO 5540 WIFI Direct from HP default to a different password?

  I try the functions on my new 5540 ENVY. Everything is set up and working correctly so far. I just printed a document from my iPad using the WIFI Direct function on the printer successfully. However, the default password on the printer for the WIFI Direct is simply "12345678". Surely, it should be replaced by a more secure password. My friend something printed its iPad - so obviously, this password is not exclusive to me, anyone can print stuff on my printer just for fun and I have a lot of students around me, the problem could become expensive for me and very boring. WIFI Direct signal covers a distance. I contacted HP telephone support, but the process is time consuming and I had to hang up because I had to work. Maybe someone here could give me instructions, and I can change the password when I have free time. I use wifi for internet (cable ethernet only) and the printer connected via USB to the computer. Also, when I turn on my computer (BUT NOT THE ROUTER) on the wireless function, the printer is and what I need to do is enter "12345678" and start printing. There is no guarantee either. Can someone tell me how to change the password for WIFI Direct 5540 envy? Thank you.

  I'm sure that you can change the EWS web page for your printer.

• Envy 14 DVD will not change the region Code

  My Envy 14 is until the last amendment of the Code of the region, he told me that he can change the region Code 1 more time but it WILL NOT change the region code.

  I try to change in the properties of the device of the "DVD RAM UJ897', he said 'this is your last chance to change your DVD drive region setting. Are you absolutely sure you want to continue? »... I click OK, it asks me to insert the support in this area (it is already in the tray)... I re - insert the Code region 2 DVD, and I get the error "failed to update the region Code setting. Please make sure the drive contains a region 2 media (it does) and you have administrator privileges (me) «...»

  The HP MediaSmart SW also tells me "Drive region code: region 1.» Number of times where you can change the region code: 1 ",... .He told me that the inserted DVD 2 Code region and asks if I want to change... I say yes, then confirm and nothing happens. I can't read the 2 region code DVD...

  Hello

  Start in safe mode by pressing f8 when you start your PC.  Use the arrow keys to select Safe mode and press return.  Once charged, try to change the area by car.  If it still does not work, try the procedure but with another another DVD zone 2 under Windows can be picky about what it accepts.  If it works, just restart your PC and Windows does not start normally.

  Best wishes

  DP - K

• 5530 ENVY: Can you change the live of HP Wireless channel?

  I have a HP ENVY 5530.  Can I change the channel default channel 6 wireless?

  Thank you.

  Hi EffaD,

  I couldn't find all the parameters of this model that you can change the channel with the printer wireless.

  On Laserjet printers, you can change the channel on some models.

  I've included the manual of your printer for further use.

  5530 e-all-in-one HP ENVY series.

  Good day!