HP Envy 5530: copy fuction does not work

Similar Questions

• copy - paste does not work all of a sudden

  copy paste does not work all of a sudden. I did system restore has do updates again and it still does not work.

  then I did this thing running and it might fix something and I do not understand what are the new instructions all about - that's why people buy Mac?

  CTRL + c and ctrl + v work?

  Try this

  (1) Start-> Run-> Services.msc

  2) look for Desktop Window Manager Session Manager.

  (3) restart the Service

• HP Envy 5530 e-all-in-one: copy/scanning does not work

  All the functions of the printer/scanner worked before Windows upgrade Windows 7 10.  After 'upgrade' to win 10, scanner and copier functions are kaput.

  SYMPTOMS:

  Printer funtion still works

  * Copy funtion indicates "" Now"copy" but never active scanner.  Pressing Cancel does not stop the process.

  * Manual SHUT DOWN does not work with constant "Shutting Down" message.

  * Scan to the computer and scanning to E-mail functions do not work

  * Try to run Windows scan "does not recognize the HP profile" and cannot scan using Windows 10

  ACTIONS:

  * Initially received 'C4EBA230' message on the printer screen blue with flashing icons, but a hard reset solved error

  * Have completely uninstalled & reinstalled software base three or four times of HP and HP update disc once software has detected and installed

  * Ran HP, utility for troubleshooting several times before and after reinstalls for problems of scan - driver detected every time problem.   Ignore the results of audit of pilot and proceed to the verification of scan did not work

  * Performed four resets hard to return to the firmware with parameters.

  * Tried scanning HP and Capture app (Nope - message "Device is busy" - same device is not)

  * Voltage checked the cable power and the wall outlet (OK)

  * Checked ink levels (more than one half full)

  * Searched updates firmware (not available on HP support site for want 5530)

  Seems to me that it might be mutiple problems/possible solutions:

  Machine firmware problem?  n ' any means to reinstall the current firmware via a download?

  Mechanical scanner problem? -scanner engine bad/blown bulb? -where is the nearest HP Service Center authorized Texas?

  New driver development necessary to scan to computer compatibility with Windows 10? -C' you all of the problem

  Your diagnosis?

  Hi doktor,.

• copy function does not work on

  Just hung up an officejet 4500 to a different function of the computer and the copy does not work. It prints form computer screen but not a copy placed on the scanning glass

  Is the printer as is the copy? He pull the paper into the printer and produces a sense of emptiness or the printer simply does nothing when you select the copy?
  
  So, please check your Inbox for messages.

• Envy 15 j139tx: fingerprint does not work after the upgrade to windows 10

  I have improved my ENVY 15 NoteBook Windows 8.1 for windows 10 j138tx. But after the upgrade of my fingerprint also does not work. I have updated software driver and it shows as follows.

  

  And the unit is also working (it is said ;-))

  

  But I can't add my fingerprint in sign in option. It does'nt allow me to set up.

  

  And when I open simple passage, it shows me after the error message.

  

  can someone please help me to reactivate it?

  Hello

  Open windows control panel, open programs and features, make entry for HP SimplePass right click and select uninstall.

  When this has completed, restart the laptop.

  When windows has reloaded, download the version of HP SimplePass on the following link and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71729.exe

  Once the download is complete, open your downloads folder, right click on the installer SimplePass and select "Run as Administrator" to launch the installation.

  Once again, when this has completed, restart the laptop.

  When windows has reloaded, open windows control panel and on the top right, next to the display by: select "large icons".  The new layout, select the HP SimplePass entry and see if you can set your footprint digital log - on.

  Kind regards

  DP - K

• HP Envy 14 HEADSET MICROPHONE DOES NOT WORK

  Hi, I have a HP Envy 14-1111 nr laptop computer with Windows 7 and I always had problems with working microphones. I plug in my headphones and put plugs in the appropriate ports, including through taking Mic in port with a picture of a headset/microphone. I also put the audio plug on the correct port.

  The audio still works fine I can hear things properly from the helmet. But the microphone NEVER WORKS. I made sure the microphone is on and I put the headset microphone as the default recording device, and made sure it's not muted and even tried like 3 different types of helmets, but it still does not work.

  My computer recognizes my headset has a microphone when I plug it, because the independent headset appears on my recording devices. But any point the noise I into the microphone, my computer does not recognize him. Basically, it is saying that it cannot detect all the sounds of the mic.

  It's incredibly frustrating because I spent money on different microphones, but now I think it's the fault of my computer. Is there something wrong with the microphone/headphone jack? What can I do to fix this?

  Thank you.

  Solution: the HP Envy laptop is not a microphone jack, it has a "headphone" which is designed to work with smartphones.

  In order to use a headset with microphone with this computer, you need a conversion cable so that you can convert your helmet at the exit of the smartphone. I just ordered it on amazon, it should be here soon.

  http://www.Amazon.com/headset-buddy-01-PC35-PH35-smartphone-BlackBerry/DP/B002SK66OY/ref=sr_1_4?ie=UTF8&QID=1367377726&SR=8-4&keywords=headset+to+Smartphone

  Boring, but at least I think it is resolved.

• Copy function does not work; HP F380 all-in-One

  Printing and scanning functions are working properly, but the copy does not work.  He stopped abruptly.  I installed a new cartridge, nothing helps.  Also unplugged printer and wait 60 seconds before I plugged it again.  Still no copy.   Any suggestions are appreciated.

  Solved!  I discovered that the printing and scanning functions used the color cartridge that printed as a dark blue.  When I ran the copy function using the copy color button, it worked.  Guess I had a bad black cartridge.

  How can I report this as RESOLVED?

  Hello Dolton,

  Welcome to the HP Forums! I hope you enjoy your experience!

  I'm glad to hear you solved your problem! Unfortunately, you can not mark your post as the accepted Solution. But if you check my post as an acceptable option, then the thread will be resolved. In this way, others will have an easier time to find this information.

  Please let me know if you have any other questions. Thank you for choosing the HP Forums. Have a great day!

  Mario

• Copy paste does not work with Lync 2010

  There are some feature does not work with

  Microsoft Lync 2010

  Version 4.0.7577.275

  I install Lync above and it works very well for calls, but it does not work for copy - paste text on Instant Messaging.

  I can't use keyboard shortcuts as it says the shortcut on the right click of the characteristics.

  can someone explain to me, how I can solve this problem I searched on the net but culdn can't find anything relevant to my question.

  See you soon...

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Lync Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/OCs

• Why to the can't 'Shared VMs' does not allow to share folders with the host and why the copy/paste does not work on them? :-((

  I want to put in place a "build mini-server' for our team. Since VMware Player is not taken in charge more I had to use VMware Workstation, and with some success, I put things up. But now more and more surface of trouble!

  To enable auto-start for the virtual machines, they must obviously be "shared." But it looks like, with this, the nuisance that these virtual machines cannot share folders more with the host. And also, it seems that copy and paste does not work with these "shared VMs.

  Is there a work around to get these features also works with 'shared VMs?

  It is VERY annoying and tedious to always have to these VMs to shuttle between shared and non-shared mode just to be able to transfer data or new versions of code for them!

  Thank you for using the workstation. How to create a script with:

  WS t vmrun start "c:\my VMs\myVM.vmx".

  And add the script to the Windows Task Scheduler to run at startup.

• Copy / paste does not work in vCenter 4.1.0

  ESXi 4.1

  vCenter 4.1

  Guest operating system in question: Windows 2008 R2 x 64 Standard

  I can't copy or paste the invited vSphere with vCenter client host and vice versa.   I'm provisioning virtual machines from a template.  Basically, I converted a virtual machine into a template and used with the Customization Wizard to supply the new virtual machine.   I imported an unattend.xml file in the Customization Wizard.   VMware tools is installed.

  I googled and found that the inability to copy and paste inside the guest OS is a default behavior for 4.1.  So I followed the work and edited the file/etc/vmware/config with the following two lines and restarted the virtual machines.

  insulation. Tools.Copy.Disable = "false"

  insulation. Tools.Paste.Disable = "false"

  No chance!

  Then, I created a new virtual machine from scratch and attached the VMDK from the former VM.  Now I can copy and paste without problem.  So, it seems that the customization process is the culprit.   I can't create virtual machines from scratch.  How can I use my template to provision VMs without the problem of copy/paste?

  Thank you

  A restart of the host is not required, it is the virtual machine that needs to restart.

  What you need to do is to power off the virtual machine and then put the new one. Not just restart the guest operating system.

  If this does not work, thanks for posting the vmware.log file of the virtual machine file.

  André

• Cut/copy/paste does not work

  I use Adobe Story on Linux running Firefox. When I select cut, copy or paste from the menu, it is said that the menu commands do not work and use the keyboard. I try it with the keyboard and it still does not work. This lack of basic text editing is Adobe Story effectively unusable.

  Thank you.

  If you are facing this problem on Safari, then please go through this link to remove the restriction sandbox on flash player for "story.adobe.com."

  (You must first open "story.adobe.com" in safari before performing the steps mentioned in the link below)

  http://helpx.Adobe.com/Flash-Player/KB/removing-sandbox-restrictions-your-Safari.html

  After the removal of the restriction, charge history. Copy-paste should work now.

• copy / paste does not work in El Capitan

  Since the upgrade to 10.11.6 the functions copy / paste don't work, either by the keyboard shortcuts or the Edit menu.

  Then you have a bad installation.

  Try these in order to test your system after each see if it is back to normal:

  1. a. reset the PRAM and NVRAM on your Mac.

  b. Macs with Intel processors: reset of the controller (SMC) system management

  2. restart the computer in Safe Mode, and then restart again, normally. If this does not help, then:

  Boot to HD recovery: restart the computer and after the buzzer, press on and press and hold the

  Command and R keys until that Menu Utility screen appears.

  3 repair the hard disk and permissions: restart the computer and after the buzzer, press on and hold down the command and R until the Menu Utility screen opens.

  When the Utility menu, select disk utility, and then press the continue button. After loading disk utility select it

  indented (in general, Macintosh HD) entry of the list to one side.  Click first aid button in the toolbar. Wait for the operation

  is over, then quit disk utility and return in the Utility Menu.

  4 download and install OS X El Capitan 10.11.6 Combo Update.

  5 reinstalling OS x: reboot of HD recovery Select reinstall OS X in the Utility Menu and click on the continue button.

• Copy/cut does not work on Windows 8.1

  I upgraded to Windows 7 (where the FF worked fine) to 8.1 Windows a few months ago. After upgrade FF stops working well enough for me to use. I opted for Chrome/Opera, but I'm tired of this and want to come back to FF but am it is very difficult. The questions are

  - I can't copy/cut anything via either Ctrl+C or the context menu. The context menu rarely will show Copy/Cut/Paste and if they are shown they do nothing. One time I pressed crtl+C a lot ina row and Copy worked for that session but when I restarted the browser it stopped working again.
  

  These may or may not be linked to the question of copy/cut, but certainly do not work as well.

  -  Sometimes the context menu will show every possible menu item ever available in the OS. I'll right click and I need to scroll and scroll to find copy/paste. They still don't work when I find them.
  - I can't highlight text and have the context menu show the "search google" button. Nor can I take that highlighted text and drag it to the URL bar/search bar.
  - If a video is playing (youtube/comedy central...) and I drag that tab out to make a new window this creates a blank "New Tab" in the original window and make it look like the video tab is moved to a new window but the video won't play any more. Nor can I stop it. and I can't close that tab by right clicking. But I can Ctrl+W it but that doesn't stop the audio. The audio will continue until I close FF entirely.
  - Middle click used to not work but now usually works. i.e I used to not be able to close tabs or open links in new windows with middle click. But FF 28 seemed to fix that. Again mayeb/maybe not related.
  

  I am running FF 29 but these questions were all present for the latest versions of ~ at least 4 (all that was last fall). I use FF sync and everything works fine on all my devices synced running W7. It is the only computer that I have W8.1 on so I can't test another 8.1 installation. I uninstalled and reinstalled several times but I don't think that I have deleted all my personal computer setting. I have a few extensions (Adblock more 2.5.1 all-in-one genstures 0.26, Rainbow 1.6, more Smart Bookmarks bar 1.11, 1.0alpha18 of Stumbleupon and TiddlyWiki). They are all also synced on my other computers.

  Any ideas?

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  
  Note: This will make you lose all the Extensions and preferences.

  • Sites Web open is not recorded in less than 25 versions of Firefox.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• HP Envy 5530: Ink cartridges does not...

  I have a US HP Envy 5530 who should use the ink cartridge 61.   I am now back in the United Kingdom and the replacement cartridge says use 301.

  When I do that, I get an error on the printer saying that the cartridge is not compatible.

  Suggestions (other than track down 61 ink cartrdiges) greatly received.

  See you soon.

  Hi lloydsal!

  You can call the HP support at 1800-474-6836 hotline so the tech supervisor can make the process of 'Régionalisation' (on the location that you set on the printer and the cartridge is riding) so you can still use it in the United Kingdom.

  I hope this might help.

  Nice day!

• HP ENVY 7640: Wireless radio does not work

  I just bought this printer and it didn t find the network. I printed a report that said now

  the wireless radio is not working, you need HP support.

  Something you can do about it or how I deliever back to where I bought it?

  Try to reset the printer back to the default settings and try again.  Print network config sheet and check to see if it says failure of wireless radio.  If so, take it back for a new.