HP Envy 5530: HP Envy 5530 does not not with Windows 10

Similar Questions

• Magic mouse 2 scrolling does not with windows 10

  I installed windows via boot camp 10. Now when I start with windows, I can move the magic mouse 2 on the screen but the scrolling with the mouse works do not. When I start with Osx 10.11.4 mouse Magic 2 doesn't have a problem.

  have you installed the bootcamp drivers that you create within the bootcamp utility in OS X?

• HP envy 17 can not boot windows or using recovery DVDs after the replacement of the motherboard

  Hi all, I need your help

  first of all sorry for my English but I'm from Greece. I really don't know a lot about the mobile only very basic computer.

  I have a hp envy 17 3d 2080en with windows 7 Home premium which, after overheating, chips to the motherboard. I ordered and installed a used motherboard from China (part 630793-001 hp number).

  After that I tried to start the laptop, but when he opens he said probably due to the change of the material he cannot start windows normally. After reading a lot on the internet, that I tried using the recovery DVDs I had prepared before the problem, but they will not start just yet. Then, I tried to use the cd system repair but again no luck.

  I looked in the bios as some people say on the internet and realized that the product number and serial number are different from those of my laptop and it's maybe part of the problem, but I don't know. I looked in other posts about similar problems, but did not get a definitive answer and this is why I post for your help.

  Thanks to you all

  Nikos

  IF YOU HAVE AN HP LAPTOP (MINE IS HP ENVY 3D 2080EN) THAT YOU HAVE CHANGED THE MOTHERBOARD WITH ANOTER ONE (MINE WAS FRIED OVERHEATING) AND AFTER REPLACING YOUR LAPTOP DOES NOT START AND YOU CAN'T FIX IT WITH SYSTEM REPAIR DISC OR DOES NOT PERFORM A CLEAN WINDOWS INSTALL OR DON'T LISTEN NOT A RECOVERY CD/DVD RECOVERY THEN EXPERTS HP WHO KNOW NOTHING. LOOK IN YOUR BIOS, AND IF YOU SEE THE PRODUCT NUMBER OR SERIAL NUMBER DIFFERENT THAN THOSE APPEARING ON YOUR COMPUTER (USUALLY IN THE BATTERY COMPARTMENT) THEN GO TO A HP SERVICE ALLOWED AND TELL THEM TO HAVE YOYR TATTOOED BIOS. WITH THE TATOO (COST US $ 40), THEY WILL REPLACE THE NUMBER OF BAD PRODUCT AND/OR THE SERIAL NUMBER WITH YOUR MOBILE PHONE NUMBERS AND YOUR PROBLEM IS SOLVED. MY MOTHERBOARD HAS BEEN FRIED TO OVERHEAT AND I BOUGHT A USED ONE FROM CHINA. AFTER I REPLACED IT THE LAPTOP WOULDN'T START AND WOULD NOT ALLOW ME TO REPAIR DVD HE OR EVEN THE USE OF RECOVERY. I CALLED HP SUPPORT, I EVEN JOINED THE HP FORUM TO ASK FOR HELP AND I GOT ONE EXPERT WAS USUALLY TRY THIS OR TRY THIS. DON'T LISTEN TO THEM. FINALLY, I READ AN ARTICLE FROM THE INTERNET THAT EXPLAINED THAT WHEN YOU CHANG THE MOTHERBOARD / SYSTEM BY ANOTHER THEN THE BIOS REFERS TO THE NEW PRODUCT NUMBER, MOTHERBOARDS AND/OR THE SERIAL NUMBER AND THIS WAY THERE IS INCOMPATIBILITY WHICH DOES NOT ALLOW WINDOWS TO START, YOU CAN NOT REPAIR WITH SYSTEM REPAIR DISC OR IT DOES NOT PERFORM A CLEAN WINDOWS INSTALLATION OR A RECOVERY CD/DVD RECOVERY. ONCE YOU TATOO THE BIOS THATS IT. THE LAPTOP WORKS. I HOPE THAT THIS MESSAGE WILL HELP SOME PEOPLE WAISTING THERE TIME AND SPEND THE MONEY FOR NOTHING

• Lenovo battery Z50 - 70 does not load Windows 8% 10

  Hi lenovo Z50-70 battery does not load Windows 8% 10

  I uninstalled the old Yang APP and reinstalled this

  were of no irrelevance that even once and adde the application in the windows store "parameters of Lenovo.

  And it does not load beond 8%

  A have you tried a new charger did not help

  text is pretty funny to 8% and 2 min at full load :-)

  Try opening the energy manager and click on settings, click on conservation mode to turn it off, then unplug the power cord and plug it back again and you should see the battery load again.

• Winows lost password does not open windows

  Wind ows 2000 password lost does not open windows

  Keep passwords secure - Microsoft on passwords strategy
  http://support.Microsoft.com/kb/189126

  What to do if you forget your Windows password:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

• "This product does not support Windows NT

  I'm trying to install my Carmen Sandiego game on my Vista computer.  This drive worked fine on my XP computer.  Unfortunately, my XP is dead and I am now a Vista user.  I inserted the disc, started the installation, and then all of a sudden the installation stopped dead and the message "this product does not support Windows NT" jumped on my screen.  What I want to know is what does this mean mean and how do I get around it to install my perfectly good and entertaining game on my computer?

  Use the XP Compatibility Mode

• MFC - 290C scanner does not. Windows error solution

  MFC - 290C scanner does not. Windows error solution

  Hello

  ·        You did changes to the computer before the show?

  ·        If it works much earlier?

  ·        What is the exact error message you get?

  I suggest that you follow the steps in the link and check if it helps you to solve the problem:

  http://www.brother.com/E-FTP/windowsvista/us.html

• Vista SP2 does not updated Windows because the Windows Modules Installer (Trustedinstaller.exe) crashing

  Hello.
  My laptop Vista SP2 does not have Windows updates due to the Windows Modules Installer (Trustedinstaller.exe) crashing:

  Error message:
  "Signing of the problem:
  Problem event name: APPCRASH
  Application name: TrustedInstaller.exe
  Application version: 6.0.6002.18005
  Application timestamp: 49e01af1
  Fault Module name: wcp.dll
  Fault Module Version: 6.0.6002.18005
  Timestamp of Module error: 49e0380e
  Exception code: 80000003
  Exception offset: 0013b 972
  OS version: 6.0.6002.2.2.0.768.2
  Locale ID: 2057
  Additional information 1: fcbe
  More information 2: 21dec0ca93c87c4af4036e2c4a4d224a
  3 more information: 93a 4
  "Additional information 4: 172cbe47bfd87945783d7b08d7f02897.

  Update history shows a number of updates that haved 'impossible' to install accordingly.
  Any ideas how to solve this problem for all my PC install Windows updates pending?

  Thank you very much!

  Hi Spoon579,

  Jose is correct that we need more information. Without any information only generic suggestions that we can supply to run SFC/scannow here or CheckSUR here

• Windows theme does not work (Windows Ultimate), there is no desktop image and photo does not evolve

  Windows theme does not work (Windows Ultimate), there is no desktop image and photo does not evolve, is one knows how to fix this problem

  Hello

  Your Windows passes genuine validation? If your activation session has expired and that windows did not pass the validation, it will not show any visual effect such as background noise, themes etc. It will only show a black screen and at the bottom right of the screen you can see attention.
  Cihan

• Computer does not load Windows after reset after installing HP-J6413

  Bought J6413 all-in-one; the software that is installed according to the instructions on the CD.  Attempted to restart after the installation, the computer hangs upward after shooting intself on and display the logo of the motherboard, does not load Windows.

  Printer is off, did reset, everything was fine, Windows loaded etc.  Repeat the action and came to the conclusion that the power of the computer with the printer off left (it's a fax machine, it should be all the time) or even reset the onboard computer after, say, install new software, prevents the loading of Windows on them turn on the computer.

  Only possible mode of operation is to put off the printer, then turn off the computer, then turn on printer to serve fax standby and then do the same set of operations before turning to new computer.

  Please refer to the manuals that you received for your PC and disable the "USB Émulation" and "USB devices starting" the BIOS settings.

• my computer with windows broken and now my new computer does not have windows, is it possible to get windows on my new computer from my old?

  my computer with windows broken and now my new computer does not have windows, is it possible to get windows on my new computer from my old?

  Hello

  You tell us what type of license you have.

  If the former was preinstalled, NO, you cannot transfer it.

  Read this information:

  If the laptop came with the preinstalled Windows operating system (Dell, HP, Acer, etc.), this product key supplied with the laptop is preinstalled OEM license and is not transferable.

  OEM license/product key (systems of operating pre-installed on Dell, HP, etc.) is related to the first machine it is installed on and dies when dies of this machine.

  The above applies also to OEM system builders licenses.

  License of operating system in detail, that you buy and install yourself, are allowed to be transferred to another machine.

  And retail licenses also can be installed on a machine at one time.

  ___________________________________________________

  And please read this, you can:

  http://www.Microsoft.com/OEM/en-GB/licensing/sblicensing/pages/licensing_faq.aspx#fBid=cbW6pY-wjS6

  See you soon.

• Windows does not ACTIVATE WINDOWS can't

  PLEASE HELP ME!

  I did a restore and recovery backup because only my WINDOWS 8 stopped to update and gave me problems with speed. I did everything you can imagine. I even run the tweaking.com from windows to check for problems.

  Now the computer does not activate WINDOWS and gives me this message, please activate windows... I click top then says Windows can not be activated, please contact Microsoft Support.

  I have a question and problem and I really need to know how to operate. If I have to reset the computer and reinstall Windows (which hopefully livery) please let me know. At this point the computer is not activate windows and is a real problem

  I appreciate your response.

  Run a full scan with Malwarebytes and AdwCleaner , and then run file System check (SFC) Scan and repair the filesystem - Microsoft Community.

  Uninstall any antivirus bloatware, use built-in Defender.  Use the special tool to uninstall any inflated AV: uninstallers (removal tools) for common - antivirus ESET Knowledgebase software

  Tweaking registry cleaners and the suites (not counting as CCleaner) ruin Windows.

  I would try first to restore the system to a point where he was running better, or if it does not help then refresh or reset: How to refresh, reset, or restore your PC - Windows help

  As a last resort, you can follow this excellent tutorial to make an own 8.1 Windows Installer which puts the quality of installation in your own hands you and keep.  Just stay away from Tweaking suites, stick with integrated antivirus, Defender, keep everything off Startup tab in Manager tasks, watch your freeware installs like a Hawk of snitches, periodically scan with Malwarebytes and AdwCleaner

• 8 window does not accept windows updates!

  I recently downloaded windows 8 and does not receive windows updates.  This does not prevent my installation things like itunes!  I've tried everything I can think of, but nothing seems to work.  Anyone know why?  I disabled the firewall, I tried windows update diagnosis, research on windows update for updates and does not display anything, I tried virus checking.  I am at a loss and is about to throw the computer and get a woman in the place!

  Hello

  Thanks for posting your question on the Microsoft Community.

  As you've already tried several troubleshooting steps, I suggest that you try to reset the Windows Update components. This clears the cache to update and will allow windows to check for each update is available on our server. If an update is found is not installed, which will appear under available updates.

  I suggest that you follow the steps below and try to reset the Windows Update components:

  1. Press Windows + X key.
  2. Click on (Admin) command prompt.
  3. Disable Windows Update services. Type the following commands and press on enter after each line
     1. net stop bits
     2. net stop wuauserv
     3. net stop appidsvc
     4. net stop cryptsvc
  4. Reset update components. Copy the following text and paste the same in the command line window.
     1. Ren %systemroot%\SoftwareDistribution SoftwareDistribution.bak
     2. Ren %systemroot%\system32\catroot2 catroot2.bak
  5. (Note: shortcut keys do not work in the Windows command prompt, please use right click to paste these codes.)
  6. Restart the Services. Type the following commands and press on enter after each line:
     1. net start bits
     2. net start wuauserv
     3. net start appidsvc
     4. net start cryptsvc

  Try to check the updates now, let us know if you encounter error messages.

  Hope this information is useful. Just reply with the results and if you need help or have any other questions about Windows, we're here to help.

• Windows 8 does not support Windows Mobile Device Center 6.1 and 6.5?

  Windows 8 does not support Windows Mobile Device Center 6.1.    Anyone know of any solution to the connection on Windows 8 terminals with Windows Mobile 6.1?

  Hello Manu,

  Thanks for posting your query in Microsoft Community.

  From the information you have provided, I understand that you need information on Windows Mobile Device Center for Windows 8. I will certainly give you with this information.

  Microsoft Windows Mobile Device Center replaces ActiveSync for Windows Vista and Microsoft Windows 7.

  Windows Mobile Device Center 6.1 is currently available for the following versions of Microsoft Windows Vista.

  • Windows 7 Ultimate
  • Windows 7 business
  • Windows 7 Professional
  • Windows 7 Home Premium
  • Windows 7 Starter
  • Windows Vista Ultimate Edition
  • Windows Vista Business
  • Windows Vista Business
  • Windows Vista Edition Home Premium
  • Windows Vista Home Basic
  • Windows Vista Server

  See the link.

  http://support.Microsoft.com/kb/931937/en-us

  If you face problems more when working with Windows Mail on the Microsoft Community Forum.

   

• I have adobe acrobat 7 Professional and I am trying to install it, but the old serial number does not work, windows 10

  I have adobe acrobat 7 Professional and I am trying to install it, but the old serial number does not work, windows 10

  See download Acrobat 7 and CS2

• my wireless mouse and keyboard do not with windows xp after you install a new battery.

  my wireless mouse and keyboard do not with windows xp after you install a new battery. they work very well in the diagnosis.

  Hi nwecker,
   
  -What is the brand and model of your mouse and your keyboard?
   
  If the keyboard and mouse are Microsoft, here are some links that you can give a try on:

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  Solve the lack of response from the keyboard or the mouse wireless after weeks of typical use