HP ENVY h8-1409: Moving H8 WANT h8-1409 motherboard in a custom box

Similar Questions

• I want to uninstall Bethesda game "Seadogs" uninstall box saying 'Are you sure () to unintall' Guard come little matter how many times I click Yes. Anyone got the answer on Vista.

  I want to uninstall Bethesda game "Seadogs" uninstall box saying "Are you sure () to uninstall" warning come shortly matter how many times I click Yes...  Anyone got the answer on the Vista system.  I want to get it out of my computor.

  Hi johndelury,

  I see that Seadogs game is not compatible with Windows Vista, which could be the cause of this problem. See the link below

  http://support.bethsoft.com/eng/platformlist.asp?SID=014429110505065049014055&PID=1077&PNM=sea+dogs

  Method 1: uninstall files could be corrupted, re - install (it replaces the corrupted uninstall files) the game, and then try to uninstall.

  Method 2:  First, contact the manufacturer game for any program to uninstall to uninstall the game completely from the computer.

  Method 3: You can follow the steps mentioned in the article below to manually remove the game

  How to manually remove programs from the add tool / remove programs
  http://support.Microsoft.com/kb/314481

  (Article applies to Windows XP, similar steps valid for Windows Vista)

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

• I want to use the registration of custom with hyper-site domain object merges? Is this possible?

  I want to use the registration of custom with hyper-site domain object merges? Is this possible?

  Hey,.

  At that time, saving custom object data cannot be used with following:

  • with Hypersite field mergers;
  • with the research data on the data in the field, only the number of overall;
  • on off key Dynamic Content in the emails

  Thank you

• DPS is their function where the user can choose which pages they want to keep, to build a custom (build yours) version for themselves.

  DPS is their function where the user can choose which pages they want to keep, to build a custom (build yours) version for themselves.

  N °

  Neil

• HP Envy M6 dx1205: spare battery want M6

  My original battery appears to be dead.  I ran several tests using information I found on this forum.  (I have a 0% available, hip, does not support message on the battery in the status bar icon).  I ordered a replacement battery which was not OEM.  Battery is not recognized despite updating the BIOS but also checking uninstall battery under Device Manager. Return this battery.

  I went through HP for a new OEM battery, only to be told to go to Impactcomputers.com for the purchase of replacement.  Still, I bought the battery recommended by HP; the company had only non - OEM, but this is where HP sent me.  This battery does not register either.

  So for those who read, I have:

  • update BIOS
  • battery tested BIOS
  • tried to use a different power adapter
  • Replace the original flat HP battery to try
  • have tried all the stuff I can find on the internet and on this discussion forum.

  I just need help.  I bought two new batteries and will neither recognized so that I can be powered by batteries.  I don't want a portable office.  So very frustrating not to find a battery.  I'm not buying a new laptop with a $50 battery.  It is a problem that can be easily fixed to HP.  Thus, HP, what is your suggestion?

  Hi @4vbgirls ,.

  Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question about your m6-1205dx HP ENVY Notebook and questions with the correct battery. Here is a link to your Manual 26, page and it shows that the original was a 62WHr of 6 cell 2.8 Ah lithium-ion battery 6 cells, with a part number 671731-001. If a new battery is not considered perhaps there is a problem with the motherboard and charge.

  You will need to test in a repair center to ensure that what is a failure.

  Thank you.

• HP ENVY Notebook PC m4: m4 WANT - what kind of RAM should I get an upgrade?

  Hi all

  I would like to move from 4 GB to 8 GB (16 GB) DDR3 RAM (1 x 8 or 2 x 8) - so far, I was recommended to brands such as Corsair, Kingston and Samsung, but I'm not sure of the exact specification of what I need for my laptop

  Maintenance and Service PDF for the m4 WANT contains the following information:

  (2, PC3-12800, 1666 MHz, DDR3) memory modules 8 GB, 4 GB, 2 GB

  Given that info, I'd be sure to go to the next product?

  http://www.Amazon.co.UK/Corsair-CMSX16GX3M2A1600C10-vengeance-enthusiast-notebook/DP/B0076W9Q5A/REF=...

  Thank you

  Joe

  The modules of memory on the web page from this seller are guaranteed compatible with your laptop.

  http://www.geheugen.nl/Kingston/80468/HP-Compaq-envy-notebook-M4-1015dx.html

  The memory module that you asked in your subject PM is not a compatible memory module.

• TouchSmart HP ENVY 17 t-j100: I want to upgrade to SSD drive

  I have a HP ENVY 17 t-j100 Quad Edition CTO Notebook computer Touchsmart (ENERGY STAR) and you want to update the drive with a Solid State Drive and options I have are 1 to 2 TB but it asks for the interface and I'm not sure if this unit hadles interface SATA, SATA11 or SATA 111 so I prefer the faster out there please let me know if mylaptop can handle SATA 111 SSD 1 TB drive

  Hello

  From my memory, the HP ENVY 17 t-j100 Quad Edition CTO Notebook Touchsmart (ENERGY STAR) use SATA III. YUO can use the following tool to check:

  http://download.cpuid.com/PC-Wizard/PC-wizard_2014.2.13.exe

  More information is located on the following post:

  http://h30434.www3.HP.com/T5/Notebook-software-and-how-to-questions/how-do-I-determine-if-my-computer-can-handle-SATA-II-or-SATA/TD-p/2352227

  Kind regards.

• Computer laptop envy 2015: see flickering on want 2015

  I want HP 2015 and the laptop display blinks. This flashing is best described as the frequency of the refresh rate of the display was not correct. I have been wanting with winows 8.1 but improved to 10. I used win 10 for a week, but it was Pentecost fault screen to the laptop was sent for repair of hp where they have updated the bios and replaced the defective screen. 6 months later I face a NEW problem with flashing display. I can best describe it as a very light of the entire screen flashing, but it is very annoying when you open applications or some programms with contrast of dark colors. I made sure all my drivers are up to date, I've made sure the screen refresh rate is 60 Hz (max). Backlight is entirely bright and there is no light of Pentecost of interference in the House because the problem is present in the dark. I even thought that it might be the ptoblem with the compatibility of the programs, but maybe it's not the case. I am of ideas what to do please help.

  I have not tried pluging the laptop display difrent because I don't have 1 shows at the moment I have a cable connection. I put the laptop to the factory settings and the problem has not disappeared. I wil return the product and the number of insurance claim thank you for your help.

• ENVY dv6 - 7373ca: update BIOS WANT dv6

  Hello

  After I managed to remove the two "unknown device" - entered the W10 Device Manager clean install thanks to this forum, I tried to upgrade to the BIOSVersion F.2D Rev a dated August 26, 2014 and listed under Windows 8 (sp68425.exe) which, according to the note, HP recommends highly.

  As I was not sure if this update would work under W10, I first tried the method described (HP Notebook PC - updated BIOS) with the opening of the menu equipment Diagnostics UEFI immediately by pressing the ESC key several times, once per second, until the Boot Menu is displayed and then pressing the F2 key. But unfortunately on the HP PC Hardware Diagnostics UEFI screen of my ' WANT dv6 - 7373ca "there are only four options (1. Memory test, 2. Hard drive test, 3. Language, 4. Exit) and no option called 'Firmware Management' or 'BIOS '. Because I would have preferred a BIOS update without starting the Windows operating system, is there something I can add this missing option menu Hardware Diagnostics UEFI?

  So I took the chance to run this BIOS file "sp68425.exe" in Windows 10 and everything seemed to work fine except the error message short after the new throw about 1 or 2 seconds that an error has been discovered, which needs to be solved and a percentage that was happening 100% before 10 of Windows start still.

  Now, everything seems to work ok: I can access the BIOS again much easier than the old BIOS dating sometime in 2012, I can boot Windows 10 without any error message longer, I can restore my WindowsImageBackups using the repair-CD as well as well as the SystemRestoreDrive I had both created on Windows 10. And the new BIOS version number and date are displayed under the W10 and also after the start systeminfo pressing keys ESC and F1. Is there anything else I can do to check the correct functioning of the BIOS?

  Concerning

  Seek and you will find what I found, it was supposed to be the latest version of "HP PC Hardware Diagnostics UEFI" (v. 5.9.0.0) I installed immediately on the UEFI System Partition to update the old one in my laptop (c. 1.6.0.0). This provided the desired options '-update BIOS "and"BIOS-Rollback"after pressing the F2 key without having to start Windows or if this does ' t OS start.

• ENVY of HP DV6 7214TX: want to Hp Dv 6 stuck on restart the notebook after adding the 2nd drive hard trolley

  I do not use blue ray. so I bought a new SSD. I put in the main area of the hard drive in the laptop and put the 1 TB hdd disk in the 2nd drive hard carriage and insert it in place of blue ray player.

  Everything work fine except one.

  Whenever I restart the computer it's stuck on the first screen on reboot.

  It doesn't happen when I stop the computer. When I hit the power button, it starts up fine. but on reboot it still stuck on the first screen.

  is my 2nd carriage of failed hard drive or there is another problem.

  Its pretty weired tha on turning off the system starts, but on reboot it stuck on the first screen after startup

  Any ideas what solutions are

  Thank you

  Fassi Fihri

  Hi @FarooqAbdullah,

  Thank you for visiting the Forums HP's Support and welcome. I watched your problem on your laptop dv6-7214tx HP ENVY and issues with a start with your new SSD. You can reset the BIOS with this document by selecting the reload the default BIOS settings. Who has helped others as she seeks the new SSD.

  Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system.

  I hope this helps.

  Thank you.

• Envy 17 3000 - portable 3D: want to 3000 17 - 3D graphics card is bad or detaches from the motherboard

  Hello, my son has a laptop 17 - 3D want 3000 and the video graphics card went bad or the motherboard unsodered, is this repairable?

  Everything is repairable for enough money. The only option is to replace the motherboard. Making may not be not too expensive as long as you have someone who can do the job part free. The laptop is old enough that good job cards mothers may cost $80-125 on the market.

• Envy of HP dv6 7204tx: want to replace Ralink RT3290

  I have a hp Envy HP dv6 7204tx laptop.

  Unfortunately, the Ralink RT3290 wireless card does not support the 5 GHz and this is why I intend to replace.

  It would be useful that someone can confirm if Intel Centrino Advanced-N 6235 is compatible to replace Ralink RT3290?

  manojmcn wrote:

  I have a hp Envy HP dv6 7204tx laptop.

  Unfortunately, the Ralink RT3290 wireless card does not support the 5 GHz and this is why I intend to replace.

  It would be useful that someone can confirm if Intel Centrino Advanced-N 6235 is compatible to replace Ralink RT3290?

  Hello

  Yes, I can confirm it for you. The same series Dv6, the same card with nVidia GT 650 M 2 GB and Intel 6235 works well. Intel 6300 Ultimate (installed the third antenna myself) and Intel 7260AC works very well also. All tested on the mobile signature.

• ENVY 4524: Cannot print 4524 WANT using MAC CAPITAN

  I recently bought a new HP ENVY 4524 and can't print. I followed all the instructions that I can find, and when I try to send a document to print it just isn't. It will say "printing" and "finished printing" but nothing happened!  I upgraded my OS to El Capitan, set up on my wifi and checked there is a good connection and turned off the firewall, I can print from my I pad.  I would be grateful for any advice solve it please.
  Thank you

  Hello

  Try to remove the printer and then add it again by opening the Preferences tab and then selecting «printers & scanners»

  From there, click on the sign less under the printer icon to remove the printer and then add again using the sign.

  This is often useful if you have trouble establishing a connection.

  

• HP ENVY PHOENIX 800-060: transfer windows want to 800 motherboard again - 060

  Hello

  I bought this new computer there is a little more than two years and now I tells me that the motherboard and power supply have out crapped on me. We could think of a motherboard should last longer than that, but I digress...

  I would replace the motherboard so that I can save the rest of the computer. Is it possible to transfer my license windows from the old motherboard to the new? Or I have to buy another license?

  Thank you

  Greetings,

  I hope that you back up the important things on several external media and in the cloud until it happened.

  The failure of food fry the HDD/SSD or any other component?

  You can contact HP to service here.

  HP will replace the motherboard and the MB of tattoo. This would allow you to use HP recovery media to bring the system to a factory State. You wouldn't need a new Windows product key.

  Do you make or buy HP recovery discs before this catastrophic event? It appears your PC comes with Win 8.0. Recovery media, you can order here.

  HP will reinstall Win 8.0 if you replace the defective components and tie the mother of replacement HP factory for the chassis number of the system (tattoo).

  If you replace the motherboard on your own, you can buy a new Windows product key.

  See you soon

• HP Envy h8 1409: just restored to factory default and now windows 8 is not activate! Help, please!

  Recently, my PC started a little all around to have massive problems that I don't mind going into details, but I decided that after 2-3 years to possess, I would restore it factory default. It hurts but it would be a good idea, because I knew that windows are installed on it and apparently, this model is supposed to just reinstall without any problem...

  I have no idea what the hell happened, but now he has not activated windows. I know that the product key, and when I get it, it says "your product keys works! Continue when you're ready', then when he starts to deal with it, I get the error "the following error occurred while trying to use the product key:

  Code:

  0xC004F01F

  Description:

  The software licensing service determined that the license is not valid. »

  So seriously, what the hell am I supposed to do? Please help me

  Hello

  If the original HP recovery partition is intact then you should be able to create the recovery media.

  Before attempting to improve once again, use a hard drive of commerical known reliable product imaging in the image of your hard drive to external media.  This will save you a lot of time and effort, if you never experience questions requiring to return to a fresh factory restore and then have to go through the whole update process again. The image will also save you if your hard drive fails.  If the HP recovery media is the plain W8 then take the shot.  Then after all the updates are applied and your with set success to date to W8.1 and then take another picture.

  Thanks for posting on the forum.