HP Envy H8-1423: HP Envy H8-1423 with ssd Intel 730

Similar Questions

• activate the AHCI mode on Envy Dv7 - 7398ca with SSD

  Year old i7 envy Dv7 - 7398ca notebook with SSD Samsung 840 Pro x 256.  Windows 8.1

  I've updated to the SSD shortly after I purchsed the laptop.

  No problem except the Samsung SSD Wizard software keeps tagging me as AHCI mode is disabled and must be enabled and I do not see it in the BIOS.

  Or I see anything that relates in the device as IDE Manager or other.

  It seems that the SSD is optimizing not itself based on the fact that it considers that AHCI is disabled.

  I apologize for the issue being this topic seems to be beaten to death over time, but I do not see what relates to this model or similar.

  Thanks for all the ideas.

  The system is set to ahci or RAID mode. You can tell that by opening the Device Manager and look at the storage controllers. Anyway it is optimized for SSDS and TRIM is activated. You can simply remove the program from Samsung and rest assured that your SSD is optimized.

• HP ENVY - m7-k211dx: replaced HD with SSD again, impossible to install network drivers

  Hello

  HD on HP ENVY m7-k211dx not dead, no recoverable data. Figured why not install an SSD so replaced by a new Samsung 850 EVO 500 GB.

  Note: I have built many computers to office since the Pentium 4 days, consider myself as an amateur

  Installed Windows 7 Pro 64 bit without any problems (after activating the suport inherited in BIOS)

  Downloaded all the drivers from the HP site and copied on DVD

  Record fell with drivers on the desktop

  installed the chipset driver sp73543.exe, restarted everything is fine

  Installed USB driver sp70645.exe, restarted everything is fine

  Then tried to install two network drivers downloaded for this laptop specific to HP for LAN and Wireless support Web site:

  RTL8723BE/RTL8188EE Realtek 802.11b/g/n Wireless LAN Drivers -sp69888.exe

  Realtek LAN (LAN) driver -sp68120.exe

  First tried to LAN, Ran exe, checked the license agreements, etc. and it started to install, after a few seconds and error message pops up:

  "FindFile failed.

  After the closure of this pop-up a new error message:

  "Realtek network controller is not found. If deep sleep Mode is activated Please cable.

  Then tried wireless installation, after that starting exe command winow popped up a few seconds showing:

  "Please wait for the installation.

  close the window after a few seconds, nothing after that

  After trying several times to install drivers with the same exact results I went by the process of reinstalling Windows and go thru the pilot again installation process with the exact same reslts. Downlaoed new drivers with same accurate results

  Clues as to what may happen?

  Thank you and my apologies for the wall of text

  Hello:

  Normally the ethernet driver will install if you do not first install the chipset driver.  Since you've done, it's a good question, why you notification of deep sleep.

  Try the driver ethernet directly from Realtek and see if it works... 3rd driver on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 13 & PFid = 5 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

  Wireless should be easier to correct... parts list indicates that your laptop comes with an Intel 7260 AC wireless network adapter.

  I see no W7 wireless or bluetooth drivers listed for this card on the HP website for your laptop, so use the latest Intel.

  Wireless: 64-bit is the 2nd file on the left side of the Web page.

  https://Downloadcenter.Intel.com/download/25510/Intel-PROSet-Wireless-software-and-drivers-for-Windows-7-

  Bluetooth:

  https://Downloadcenter.Intel.com/download/25137/Intel-PROSet-Wireless-software-for-Bluetooth-technology-for-Windows-7-64-bit-WP-

• New HP ENVY 17 Quad t mobile, Intel® Core? I7-4700MQ unable to connect to the internet

  Just got a HP ENVY 17 t mobile Quad, Intel® Core? I7-4700MQ.  It shows my WiFi as a maximum of five bars.  Sometimes it connect, but most of the time, it shows limited.  Either way I can't connect to the internet.  I have another laptop (Windows 7), a desk top (XP), two smartphones (Android) and a TV (who knows) who have no problem connecting, I doubt given that the router.  I tried to do some research with the other laptop but most suggested solutions require that I connect to the inernet - duh - that doesn't work :-)

  To complicate the situation, it is also my first experience with Windows 8 so just to try to sail on the new laptop is a real challenge :-)  If you need basic unfortunately information you need me to scroll the steps to find :-)

  BTW - running Windows Network Diagnostics I get "Wi - Fi" has a valid IP configuration.

  Found a solution: turn the power off, have a beer or two and a few hours later started working with her again I have no idea what happened, but he began to connect to the WiFi last night and did it again this morning guess now I have to start learning how to use Windows 8

• 15 - j104ax: How can I know HDMI maximum resolution? (ENVY 15-j104ax with the Radeon HD 8750 M)

  I use this laptop, the ENVY 15-j104ax with AMD APU A10 - 5750M and Radeon HD 8650 G + HD 8750 M Dual Graphics.

  My laptop has HDMI port, and I want to know the maximum resolution of HDMI from my laptop.

  I would buy screen QHD (2560 x 1440 or 2560 x 1600), but I don't know if this HDMI supports this high resolution.

  The following link is AMD graphic sheet on my chart.

  http://www.AMD.com/en-us/products/graphics/notebook/8700m-8800m#

  If please see the 8700 M features section and search for "HD 8750 M Series GPUS".

  Interface memory is 2 GB memory DDR3 (graphics memory)

  And one that he is a specification, complete more dedicated. Please look at page 11

  http://www.AMD.com/documents/AMD-Radeon-HD-8000M-series-GPU-specs.PDF

  My chart based on GPU - Z, is connected with PCIe 2.0x8.

  And, when you look at the full features, it says that my graphic supports HDMI with 4K (maximum resolution: 4096 x 2160).

  I know that my graphics chip support this resolution, but I don't know port HDMI supports.

  Anyone know how I can see max resolution of the HDMI?

  or is there someone who has used the same laptop as mine and more Full-HD monitor? (As 2 K, 4 K, 2560 x 1440, etc.)

  Thank you.

  Hi there @SeonjongKim,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help!

  I understand that you want to know what the maximum resolution would be if you were to connect an external monitor via HDMI.

  Service and Maintenance Guide for your laptop of HP ENVY 15-j104ax says:

  • HDMI v1.4 support up to 1920 × 1080 @ 60 Hz.

  You can find this information on page 7 in Chapter 1.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

  Thank you!

• HP ENVY M7: M.2 SSD use with HP Envy M7-n011dx

  I recently bought the HP Envy M7-n011dx, with the hope of being able to install an ssd inside M.2 to start from but also run my programs.

  After reviewing the manual for it, I found it was in fact the port for the SSD, however, looking through the forums I am now more confused then ever know if this laptop has the active port m.2.

  Before I go and order any material or try to take the computer hand after the purchase, I was hoping someone could let me know if this particular model allows the use of the DSS m2.

  My research seems to show that n0xx models have active port where n1xx models do not have.

  Does anyone have any ideas or comments?

  Not exactly. The manual says this about it:

  SSD conƭgurations (for i7 + GTX PCA) ● 512 GB m2 SATA SSD (TLC) ● 128 M2 of GB SATA-3 (TLC) ● 128 M2 of GB SATA-3 (TLC) value

  While the models with an i7 + graphic GTX, that is to say the 950M has a port of m2 and I think yours is 940 M.

  I followed this M.2 debacle here since the beginning, and here's what we saw. models with a port of m2 which is dead, disabled. Models that have a port M.2 clearly described in the manual, but when you open the case, you will only find traces for a m2 but no real port welded to the.

  So I strongly hesitate to give advice on adding a player of m2 to any HP laptop which didn't plant it. It's the only way you can be sure that it will work 100%. If you're brave, at the very least, open it first and check if the mounting material is really there. Do not order the m2 before the laptop drive even comes to your door, as many people did, to their disappointment and expenses.

  The only way that a m2 is a "gotta have" If you can use a version of NVME PCI - e, not SATA. SATA based M.2s are not significantly faster than a good old 2.5-inch SSD SATA-III we can say absolutely not work. And that's another story altogether: what models can accept a M.2 NVME?

• HP Envy 15-j030eb additional SSD

  Hello

  I have a laptop HP Envy 15 j030eb (product number: E4N79EA). I was wondering if the laptop had an additional location for one SSD (on the top of the 1 TB drive HARD is already)?

  I think remember me reading that it only supports a 24 GB SSD. Now, I do not wish to transfer my Windows installation disk, I would use it probably just to install applications or games on it.

  Could someone clear this up for me and if the laptop can indeed contain an SSD, could you let me know which models are compatible with my laptop?

  Thank you very much

  1 Yes, a cache of WSSD acceleration results in a major improvement in two things: 1. a start; and improving is like an order of magnitude... 20 seconds instead of 200 seconds; and 2. opening of the fair of used programs. Your web browser, word processing, etc. "opens". It did not help sustained Read and write operations such as video of the things edition, contributing to a full size complete with SSD.

  2. Yes, you can replace the mechanical drive with a standard 2.5-inch SATA SSD. You get all the benefits of the MSSD plus best read write operations and sustained. SSD are not helpful for the game, however. The game will open and begin more quickly, but the frame will rates not go up because the game itself is not happening in space storage but in CPU and memory and video memory, that none will affect the SSD much. If you change a lot of photos or videos or something similar (ie the actual work of the computer), which involves a lot of reading and writing to the hard drive, an SSD will open a whole new world for you. I'll never get another laptop or any other computer with a mechanical hard drive. The cost of an SSD was almost a dollar concert 18 months ago and now it's more at 55 or 60 cents per concert or even a little less. You need at least a gig SSD 240. Do not opt for something smaller.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Can I replace a no backlit keyboard on a HP Envy dv7-7250us with the one that is backlit?

  Can I replace a no backlit keyboard on a HP Envy dv7-7250us with the one that is backlit? The dv7 offered both ways. any help is appreciated.

  Hello

  I see that you have a question on your laptop keyboard. Yes, you can replace the keyboard with a keyboard backlight depending on where you come from.

  Here are taken keyboards supported for your laptop in selected areas.

  

  Also, here is the Service and Maintenance Guide and go to page 59 for keyboard selection.

  If you have any other questions let me know.

  THX

• HP Envy Touchsmart 15-j181na SSD Bay

  Hello

  I have a HP Touchsmart Envy 15 - j181na with 1 TB SSHD, Intel i7 [email protected], 12.0 GB Dual Channel DDR3 @ 798 MHz.

  Inside the cover of the matinence, there is an empty Bay SSD in which I want to install an SSD. After reading several articles online and the visualization of the maintenance and Service guide, I'm a bit confused.

  A. the SSD takes mSATA rather than standard SATA?

  B. in the maintenance and Service Guide lists a 24 GB drive as an option for the installation, is the only disk capacity that I can install or I can choose any title I want?

  I did not buy a Samsung Evo 840 but now looking at the following: http://www.amazon.co.uk/Crucial-CT120M500SSD3-Internal-including-Screws/dp/B00BQ8RFAI/ref=sr_1_2?ie=...

  Thank you

  James

  Yes the single SSD, you can add is an mSATA. There is no space to add a second SATA SSD to 2.5 inches. The only practical thing you can do with the WSSD is used as a cache of acceleration drive using the Intel Rapid Storage console. This is why the manual speaks only of a 24 GB module. Add a WSSD in a system that did not come with one initially is not an easy task. It's even harder to try to make the boot drive. BIOS will not actually be a boot drive, but you can put a bootloader on the main drive and cheat the system by running the operating system on the WSSD but it's like a Bachelor's degree in computer engineering to operate.

• Install windows 7 in Envy DV7-7234 with Windows 8 with win7 dual boot and windows 8

  I can install windows 7 in Envy DV7-7234 with Windows 8 buth with dual boot: win7 and windows 8?

  Installing Windows 7 on your HP ENVY computer Notebook dv7-7234nr is not supported by HP. In addition, no Windows 7 driver is listed on HP Software and Driver Downloads page for your computer.

  HP does not recommend installing Windows 7 and it will support the installation of Windows 7 on a computer comes with Windows 8. HP doesn't provide drivers for Windows 7 and the appropriate drivers are not available for the hardware in the computer. In addition, Windows 7 can not support some of the hardware or software designed for the computer.

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  You will need to DISABLE 'Secure Boot' and ENABLE 'Legacy Support' in the ' settings of BIOS ' settings below page;

  

  Then, start Windows 8 and run the console 'disk management '. Using "Shrink Volume", reducing the size of the "C:" partition about half of its original size. Name of the partition "C:" to something like "Windows 8". Now, start the computer from the Windows 7 DVD, making sure to select "UEFI - internal CD/DVD" or "UEFI - ATAPI CD/DVD ' and not ' Legacy - CD/DVD internal."  (I recommend using a disc of Windows 7 SP1latest drivers have been included in this topic. The use of the SP1 disc usually resolves most disk hard AF and other issues. )

  Install Windows 7 on the partition without label that was established earlier when you shrunk the partition "C:". Continue to install WIndows 7 by / responding to all the guests. Once you download Windows 7 on your computer, we have to track down the compatible drivers for it. Please list all the "hardware ID" for unknown or missing devices.

  Please send Bravo

• Quickly, the HP Envy 110 unit with the Samsung tablet can be printed?

  Quickly, the HP Envy 110 unit with the Samsung tablet can be printed?

  Yes, assuming that you are referring to an Android table... If you are referring to Windows 8 tablet please specify.

  You can print via the local network using HP ePrint mobile app.

  Follow these guidelines to learn more about installation and usage of the app:

  http://support.HP.com/us-en/document/c01616126

  In addition you can also scan your Tablet using the HP printer control application:

  http://support.HP.com/us-en/document/c03561640

  Shlomi

• HP ENVY 15 Notebook PC: Which Intel WLAN adapt to choose for replacement?

  Hello

  I am looking for an Intel WLAN with Bluetooth adapter to replace mine with (laptop HP ENVY 15, product number: K2T39AV).

  I wonder if the product is compatible with my HP laptop:

  http://www.Intel.com/content/www/us/en/wireless-products/dual-band-wireless-AC-8265-brief.html

  In addition, what is the current best cards Intel (with Bluetooth and Wi - Fi broadband) which are compatible with my laptop?

  Best,

  Rhéaume

  Dear customer,

  Please go through the below document, select PAGE-23

  http://www.HP.com/CTG/manual/c03943414.PDF

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  GBL84

  I'm not an employee of HP

• HP envy 20: someone had problems updating their envy of hp with Windows Windows 8 to 10?

  Someone had hurt update to Windows 10 of Windows 8? I bought my hp envy 20 while pc ome in 2013 and hp said that it is fairly new to encourage the transition I've heard that some of the older ones are not. But I keep if with errors when my computor wants to make updates and he finally gave me the unfortunate blue screen, then finally black screen and would not start. I'm trying to understand why he did it so that I can avoid or help the situation, I am the future when I get it back of fixed neimg. Any thoughts??

  Greetings,

  Someone is probably going to stomp on my answer.

  Stick with the HP operating system factory if you can deal with that.

  HP Envy 20 is not good product number. So I can't review the instructions of your PC.

  I'm guessing that HP does not Win 10 driver support.

  Microsoft is, of course, drop the ball on the provision of the correct drivers for your PC.

  So spend you to Win 10 successfully but a lousy update your PC?

  It might be a bad driver update or a cumulative update.

  You can stop to win 10of the driver updates, but you cannot stop the other updates.

  The grass is not always greener on the other side.

  See you soon!

• Laptop HP Envy M6: problem with hinges on the m6 HP Envy laptop

  I bought the laptop M6 Envy in 2014 for my daughter and it is now coming apart at the hinges of the normal level

  wear and back, she of afraid that if she continues to open & close it may collapse, but to use for school, please advise if there is a recall on this product or how can I fix it.

  @Alexenvy

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display personal information (serial numbers and information).
  
  
  
  If you are unfamiliar with the operation of the function of the Forum, private messages you can learn it all here.
  
  
  
  Thank you for visiting the Forum from HP Support.

• Desktop HP ENVY 700: problems with the boot from usb in the bios

  Hi I'm trying to boot from usb on a desktop HP ENVY 700. I don't know the serial number now.

  I followed the instructions and have produced a bootable USB and I checked this on a work dell computer where there is an option for me to boot from my USB if I so wish, but on my HP ENVY any options choose it does not appear with my USB in question and when I try to change the boot sequence making sure the usb/floppy and drive hard usb is above the rest of the sequencers starting it always starts just to the top as usual to my windows boot 10. I've disabled secure boot and used the boot of the legacy and it still does not work.

  I went through all the options I can that seem to be logic and it just does not work. I don't understand and I have to start using a usb key that I use the operating system can be very dangerous in a real environment, so it can not be downloaded to the hard drive.

  I need immediate help, this becomes quite frustrating now that it should be simple to do, but HP is not the way to simplisitic to do.

  Please if someone could point me in the right direction I would be so appreciative ideally if I could have a ride on the way to do

  I need this to work because I can't afford to buy new systems and its for my studies so its imperative

  Your PC has a motherboard of Memphis and happens to have a UEFI BIOS and the hard drive of the GPT format.

  You can check the type of hard disk online order volume by using the DiskPart utility.

  

  Create a flashdrive bootable UEFI with RUFUS.

  https://Rufus.AKEO.IE/

  Plug it into an available usb port before you press the power button. Near the powr button and immediately start to tap the F9 key to enter the boot from the sources menu. Select the Flash drive under the UEFI Boot sources. Let the boot process. If you have created the key correctly, it should start.