HP Envy laptop: monitor external (2nd) lost after BIOS update

Similar Questions

• Unknown device on the Satellite A100-153, after BIOS update to 5.1

  ACPI\TOS1901 * TOS1901<--- this="" is="" the="" unknown="" device="" after="" bios="" update="" to="" 5.10="" on="" my="" satellite="" a100-153="">

  Vista now shows it in as unknown device manager; the TOS1900 showed up too, but after installation of Toshiba Value Pack for Vista, it went.

  Help, please. WHICH IS: ACPI\TOS1901 * TOS1901

  Hello

  ACPI-> Advanced Configuration and Power Interface
  ACPI defines hardware and software interfaces that allow focus on the OS configuration and power management to enumerate and configure motherboard devices.
  For example: ACPI is necessary for the standby and hibernation mode.

  Now your question; the new BIOS has been updated and configured to using VISTA.
  It seems that VISTA was not compatible with the previous version of BIOS because the ACPI interface. Now you can install Vista on the laptop, but it seems that you need a driver. Possibly new chipset driver version might help. But as you probably know, the drivers are not available at this time. Unfortunately

• Satellite L450D - 13 X - blue screen after BIOS update

  I have the blue screen after BIOS update. Satellite L450D - 13 X worked ok before that ideas?

  Is there contact information for Support TOSHIBA?

  Hey,.

  > Is there any TOSHIBA support contact information?
  No, becaue, must contact an authorized service provider. Guys can help on any hardware and software problems and can also order spare parts from Toshiba.

  Here is a list of aspic, where you can look closer:
  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT

  Good luck! :)
  ?

• Laptop HP OMEN - 15-5010nr: Omen HP 15: backlit keyboard does not not after BIOS update

  This morning my HP omen arrived by mail, fully functional with everything in tact. After I left my laptop to install the updates from HP Support Assistant (one of these being an update of the BIOS updates), I returned to find my computer restarted and my enlightened retro keyboard does not. After trying to use HP OMEN control to fix the keyboard, I found the keyboard flashes when I click "Apply to all Zones", but then immediately turns off again. Is it possible to fix this keyboard backlit ir question can we see an update in the near future that resolves this problem?

  Found a solution! Apparently, the keyboard stops after the update of the BIOS, so to reactivate just push F5.

• HP Envy 15 t-j100: no operating system after BIOS update

  After many failures of start-up (see messages in the forum to Boot), I was advised to update the drivers, etc. Did so, using the HP Wizard, one of the system BIOS updates. It's the last thing I did on this machine, I use now a laptop borrowed. The update of the BIOS seemed to go well, installed, then checked her restarted. But it does not re - start. "No operating system found... "Thank you very much HP.

  I told Win 7 Pro, when I ordered this machine instead of the 8 win pathetic, if I do not want to restore it to factory settings. Now, how can I get out of this hole?

  David

  Re-enter the BIOS and verify that Legacy boot is enabled-Secure boot disabled. If you need to change it don't forget to save & exit. When you restart for the first time after having turned startup security turned off, pay attention to the small notice indicating that you must confirm save this setting by entering a PIN shown + enter, otherwise these new settings in the BIOS are not saved.

• Monitor does not work after restoring update

  Hello. I have a problem with my PC. My CPU is on but the monitor shows No Signal box. Previously, this problem seems too. But I fixed that by cleaning the RAM access (or other) Point. But this time, this method did not work. I have clear the CMOS, but the problem still not fixed. Oh yes, this problem occurs after the update. When updating, the update has failed and come back. When I start the PC again, nothing is displayed and there is no sound signal. Help me please. My characteristics are processor i3 Intel, ATI Radeon HD 5550 2 GB, DDR3 RAM 2 x 2, Windows 8 Pro 64 Bit.

  Hi Chloe,.

  Thank you for the update.

  I understand that since the DVD burner does not work, you are not able to create installation media.

  Put a USB installation media option. You can use both links to download and create below

  Update Windows with only a product key

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-product-key-only

  Here are the steps:

  1. download and open the Setup file install Windows 8 Microsoft from the link above.
  2. Enter your product key of Windows 8 and start the download.
  3. once the download is complete, select install by creating media.
  4. Select the USB flash drive (it should be the default choice) and insert the USB key.
  5. accept all prompts to clear the contents of the USB key in order to start the process.

  

  

  

  

  

  Let us know if that helps. Keep us informed so that we can help you further if necessary.

• my character on measure, viewing area is lost after each update of Firefox

  I customized my Firefox personas display area, but after the updates of Firefox, he returned to standard parameters...

  The parameters of the selected character are stored in the form of a framework of pref in the prefs.js file in the Firefox profile folder.

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: opens showing the file
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  See:

  • http://KB.mozillazine.org/Preferences_not_saved
  • https://support.Mozilla.org/KB/preferences+are+not+saved
  • http://KB.mozillazine.org/themes (Light theme)

• Laptop Presario CG56: CG56 crashed after Windows Update

  After Windows update, set during the race, woke to find a "scree Orange" with the logo of Compaq.  Press F11 to enter in recovery mode has organized the restoration of the system for each restore point.  Finished with 0x8000ffff.  A ran the recovery system completely at the end.  Finished with the Orange screen.  Minimized ran impage recovery all the way to the end.  Repeat screen Orange.

  I find that the BIOS is corrupted in Windows Update, somehow.  I can get to the line of command in recovery mode, but I don't know what to do.

  Help!

  Me am HP Advanced System Diagnostics V3.0.3.0 by pressing f2 until the screen has finally come.  Do you have the System Diagnostics.

  Have you hard reboot by removing the battery, press the button for 15 seconds, extra power, hit start and the start up like a new PC was started and Windows.

• Satellite P100: After BIOS update 4, 00-WINNER cannot use his & wireless card

  Dear all,

  I was a proud owner of the Satellite P100-437 4 months already, but last week I started having major problems with my laptop. First of all, next day after I bought the laptop with Vista, I get off my laptop for Windows XP SP2 and everything was fine. I had all this work and I enjoyed my laptop a lot. Last week, I checked Toshiba web site for new drivers and I downloaded the new update of the bios 4, 00 - WIN and apply.

  After the headaches started. Suddenly, I lost my sound, but in Device Manager the sound card works fine. In addition, the small light in the wireless switch is missing and then the wireless device, saying also in the device manager that works very well.

  I backed up all my data and reinstall win xp, clean and I installed the audio drivers and nothing has changed, the sound is still missing. Same story with the wireless. Yesterday, I've been witness to something else, I have attached an external hard drive, that is with usb connection and also usb power, and suddenly the sound and the wireless back for everything, but interrupting and finally disappeared again.

  So, now, I wonder what to do and any help on this is appreciated. I work on cruise ships and my laptop it is priceless.

  Deniz

  Hello Deniz

  I told everyone every time: Please do nothing while OS works well!

  Do not forget this. The problem is that your laptop comes with Vista OS and BIOS is also designed for Vista. You were very lucky to run Windows XP Home edition with success and now you updated the BIOS designed Vista yet. I really wonder not that you have problems now.

  What to do in this situation? It's very good questions. Try reinstalling the drivers for the sound and WLAN. Maybe this will help. Maybe clean install of WXP. I can't say for sure. I A200 (also Vista preinstalled) and I think that for the moment I have no interest in updating anything. Not yet.

  Bye and good luck!

• Satellite Pro A300 - touchpad failed after BIOS update

  After that good BIOS update 2.00 to 2.10 / suggest by ALERT TEMPRO - http://support1.toshiba-tro.de/tedd-files2/0/bios-20091125132031.zip/ the touchpad of my Satellite Pro A300 - GR 1 stopped working.
  He appears under the name hidden in Device Manager. The State of the device - "this device is not present, is not working properly or is not all its drivers installed." (Code 24) "reinstall the driver has no effect of course. I can also access the BIOS utility when you start pressing F2.
  Running Vista Business 32-bit Edition.
  Ideas to solve the problem will be highly appreciated!

  Hello

  Normally, it should be possible access the BIOS, if you press F2, once you have turned on the laptop. Please check again and load the default settings there.
  And you cannot access the BIOS if you shut down the computer.

  You can use an external mouse on the laptop? Please check this too.

  I've also updated the BIOS on my Satellite A300 but I n t have a problem with the touchpad after the update.

• Satellite C660D white screen after BIOS update

  I ran the update of the BIOS on laptop Satellite C660D PSC1YE recommended and he appeared to succeed, but when it restarts the screen won't turn on. I tried a few things to fix, but nothing worked.

  Tried:

  • connect an external monitor via VGA - white too
  • remove the battery of the CMOS button
  • removing a hard drive startup, to replace again
  • a short-circuit the J1 jumper under RAM slots

  What else can I try?

  Here is the windows bios update program:
  http://Support1.toshiba-tro.de/Tedd-...0601184846.zip

  Try to start with the battery.

• After BIOS update numpad on my Satellite C850 does not work correctly

  My numeric keypad started to go crazy. What can I use are "0.369* - + button"home"end touches PGUP and PGDN.

  The keypad light is on and I can't turn it off. whenever I do what it s like I m by pressing the FN key and whenever I press NUMPAD 1 it always typing gibberish words when I press NUMPAD 2 he does what than done F12 key and so on for numpad 4,5,7,8

  All this happens after I updated my BIOS and has never been a spill of liquid on the keyboard.
  Any idea on this freaking problem?

  Hello

  I can't imagine that this problem could be linked to the new version of the BIOS.
  Maybe it of a simple bad luck that this keyboard problem appeared after the BIOS update.

  From my point of few, it looks like malfunctioning hardware keyboard.
  But to confirm this diagnosis, you should try workarounds.

  * 1 * workaround: first enter the BIOS and set its default value.

  * 2nd * solution: disconnect the power adapter, remove the battery, hold down power button / stop along 30 sec. Finally, reconnect the two devices.

  * 3rd * workaround: connect the external USB keyboard and test functionality.

  In case the USB keyboard would work correctly, the problem is related to the fault of the internal keyboard.

• Satellite L650 - Touchpad turn off after BIOS update

  Hello
  I recently got a new laptop, a L650-1CN,.
  I run different types of software from Toshiba, and one of them is Tempro,
  He shows me messages when a new update is available.

  Today I saw the message that a new BIOS update v.1.80 was available.
  I downloaded and installed. After installing my laptop closed. Then I started again.
  But after a few minutes, I noticed that my touchpad disable itself more.
  I usually use a logitech wireless mouse.

  Now, I wonder if I should do a system restore and not install this update of the BIOS or find another solution for this problem. Because it's really boring.

  Thanks in advance.

  Hey Buddy,

  Usually the touchpad disable automatically if an external mouse is connected, but only if you enable this option in the touchpad settings.

  I also use an external Logitech mouse and have enabled this option. You can find it in Control Panel > mouse. Go to the device settings tab and mark the internal pointing device option disable when the external USB pointing device is attached.

  I hope it works :)

• Satellite Pro P200-15W: after Bios Update 1.90 incredibly noisy fan

  Hi, I have a Toshiba Satellite Pro P200-15W, I recently made an update to BIOS version 1.9 and seems to have been a big mistake.
  After restarting the computer, I had a lot of software deconfig and the fan has become incredibly noisy.

  I have the problem with the Toshiba Vista registration software, I get this message: "registration of Vista has stopped working". I read other discussions, I don't want to just disable it in the start.ini file, I would actually solve the problem if there is a way.

  Is there a way to change the configuration of fans? I read a post from Toshiba on another model of laptop that has had the same problem of noisy fans after an update of the BIOS, they gave that a solution with a new version of the BIOS, is there a way to reverse the BIOS to the previous version? (recovery CD will be useful for this purpose)?

  See you soon

  Edgard

  Hello

  It seems that the picture of the fan was changed and renewed in the new version of BIOS, and so fans run fall.
  Why the table fan has been changed?

  Well, usually something like this is necessary to improve the reduction of the internal temperature while the CPU and GPU are running with maximum performance.
  This helps to prevent the equipment from damage!

  Usually, the recovery CD formats the whole HARD drive (partitions too) and installs only the image of Toshiba on the notebooks of HARD drive.
  The image contains the OS, drivers and additional software and has nothing to do with the BIOS update.
  But you can try to recover the laptop to see if you can solve the problems of software as "Vista record"!

  If you want to reverse the BIOS, you will need to contact the ASP in your country!

  Sorry, but all I can suggest.

  Best regards

• Portege M800 no boot after BIOS update

  Hello

  I encountered some problems with my netbook (Portege M800-10W) after the BIOS update.
  The update of the BIOS program appears failed. Then my Netbook automatically rebooted and now I can't start my PC more.
  All the LEDs will light up but the screen remains black and after a few minutes, the beep 3 times (1 long, 2 cm) netbook.

  How do I restore the BIOS to the previous version (or plant)?

  Thank you.

  Adrien

  null

  Hi Adrien

  I think that Akuma is right. Your laptop must be verified by the service of Toshiba s. Let check your laptop and I hope they will help you with this.