Satellite P100: After BIOS update 4, 00-WINNER cannot use his & wireless card

Similar Questions

• Unknown device on the Satellite A100-153, after BIOS update to 5.1

  ACPI\TOS1901 * TOS1901<--- this="" is="" the="" unknown="" device="" after="" bios="" update="" to="" 5.10="" on="" my="" satellite="" a100-153="">

  Vista now shows it in as unknown device manager; the TOS1900 showed up too, but after installation of Toshiba Value Pack for Vista, it went.

  Help, please. WHICH IS: ACPI\TOS1901 * TOS1901

  Hello

  ACPI-> Advanced Configuration and Power Interface
  ACPI defines hardware and software interfaces that allow focus on the OS configuration and power management to enumerate and configure motherboard devices.
  For example: ACPI is necessary for the standby and hibernation mode.

  Now your question; the new BIOS has been updated and configured to using VISTA.
  It seems that VISTA was not compatible with the previous version of BIOS because the ACPI interface. Now you can install Vista on the laptop, but it seems that you need a driver. Possibly new chipset driver version might help. But as you probably know, the drivers are not available at this time. Unfortunately

• Satellite L450D - 13 X - blue screen after BIOS update

  I have the blue screen after BIOS update. Satellite L450D - 13 X worked ok before that ideas?

  Is there contact information for Support TOSHIBA?

  Hey,.

  > Is there any TOSHIBA support contact information?
  No, becaue, must contact an authorized service provider. Guys can help on any hardware and software problems and can also order spare parts from Toshiba.

  Here is a list of aspic, where you can look closer:
  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT

  Good luck! :)
  ?

• After the update the new version cannot determine file downloads. In the eyes to determine the file, but download files go in C / documents and settings even

  After the update the new version cannot determine file downloads. In the eyes to determine the file, but download files go in C / documents and settings even if I chose another folder

  Hello, there is a general regression in firefox 27 allowing any files to upload directly to a root drive. Please try to create a subfolder (like D:\Downloads) and set as the default location for downloads...

  See also bug #958899.

• There were add - it and I lost it after the update and I don't remember his name

  There were add - it and I lost it after the update and I don't remember his name
  This is the module to show me the source of any content capable of click
  like the pictures on twitter or Facebook
  also videos on youtube
  and he showed a small icons with form of small pic on it with different colors
  and also sometimes in the form of small lock on it

  now I need to know what this add - on the name or how to get it back

  It seems that this extension:

  • https://addons.Mozilla.org/en-us/Firefox/addon/redirectbypasser/

  

• Satellite P100 - boot failure after BIOS update

  Hello

  I wanted to update BIOS on my Satellite P100 - (PSPADE) with the latest version, downloaded from the Toshiba site.
  Quit all applications.
  Run the zip file error file not found %path\phlahnt.sys.
  Keyboard not working unable to stop even by using the power button / stop.
  Laptop shutdown unplugged and battery removed.
  More boot Message No, no. Beep, nothing.

  I tried with the CD of restoration with power into the F12 key, but nothing.
  I also tried to power up with and without AC connected and with and without battery, but still nothing.
  Plug, battery, at the time led the power leds and speakers also on
  Any help? Any suggestion, any idea?

  Thank you very much
  Nour

  Hello

  Hmmm what to say. Sounds not good and in my opinion, looks like you have successfully updated the laptop computer with a bad BIOS or something went wrong during the BIOS update process
  Are you sure you used the right BIOS of 110%?

  It seems that you will not be able to fix this problem yourself, without any additional help from the laptop technician.
  In most cases, the BIOS has to be flashed again on the particular way

  For me it s clear, you will need to contact the ASP to get rid of this problem

  Best regards and good luck

• Satellite P100: After updating the BIOS 3.8 I can't access MCE pressing enter

  Hello!

  I was able to enter XP MCE by pressing the Enter key when the Welcome screen. Now I cannot and must click on the photo of the small image. Is it because of 3.8 BIOS that I put in place recently or not? Can I do this option still works? Thank you very much.

  Hello

  I put t know if you can restore this option but you should access the BIOS and try to define again the default settings t.
  Don t forget to save the settings if you exit BIOS ;)

  But I really don't understand why you have updated the BIOS. If the laptop is running without any problems a BIOS update is not necessary!
  Therefore, never change a system up and running, you know? ;)

  Besides as I know the P100 were not delivered with Microsoft XP MCE but with XP Home and Express Media Player or Vista

• Satellite Pro P200-15W: after Bios Update 1.90 incredibly noisy fan

  Hi, I have a Toshiba Satellite Pro P200-15W, I recently made an update to BIOS version 1.9 and seems to have been a big mistake.
  After restarting the computer, I had a lot of software deconfig and the fan has become incredibly noisy.

  I have the problem with the Toshiba Vista registration software, I get this message: "registration of Vista has stopped working". I read other discussions, I don't want to just disable it in the start.ini file, I would actually solve the problem if there is a way.

  Is there a way to change the configuration of fans? I read a post from Toshiba on another model of laptop that has had the same problem of noisy fans after an update of the BIOS, they gave that a solution with a new version of the BIOS, is there a way to reverse the BIOS to the previous version? (recovery CD will be useful for this purpose)?

  See you soon

  Edgard

  Hello

  It seems that the picture of the fan was changed and renewed in the new version of BIOS, and so fans run fall.
  Why the table fan has been changed?

  Well, usually something like this is necessary to improve the reduction of the internal temperature while the CPU and GPU are running with maximum performance.
  This helps to prevent the equipment from damage!

  Usually, the recovery CD formats the whole HARD drive (partitions too) and installs only the image of Toshiba on the notebooks of HARD drive.
  The image contains the OS, drivers and additional software and has nothing to do with the BIOS update.
  But you can try to recover the laptop to see if you can solve the problems of software as "Vista record"!

  If you want to reverse the BIOS, you will need to contact the ASP in your country!

  Sorry, but all I can suggest.

  Best regards

• Satellite C55-A-16Z - graphics card does not work after BIOS update

  Hello

  I have a portable Satellite C55-A-16Z with windows 8 and a Nvidia geforce 740M graphics card.

  Last week he asked me to update the version of the bios at 1.30.
  The bios update was successful.

  However when I restarted my laptop I started having a BSOD dgxkrnl.sys.
  Correction of the error and restarted for an another BSOD Windows, and after the second solution, I stopped making BSOD.
  But now, I noticed its games running, if not use the dedicated card, but use the 4000 Intel.

  In the settings Nvidia dedicated card is configured to be always on.
  It seems that my card is missing, but it appears in Device Manager.
  I tried to delete, update the drivers and the default factory reset, but nothing helped.

  Also, when I go into Options power the Intel card is listed and when I disable the card intel in the Device Manager it starts to use the graphic viewer for windows.

  How can I get my Nvidia card to work again?
  Any help is appreciated.

  Thanks in advance.

  Hello

  After the BIOS update the BIOS should be set to default settings.
  You can do it in the BIOS.

  In addition, you mentioned that Windows 8 is still installed on your laptop.
  8.1 to win has already been published by Microsoft and I highly recommend that update you the system of 8 to 8.1 Win Win.

  Before you start the upgrade to 8.1 win, you should check and read the instructions step by step for Toshiba: http://www.toshiba.eu/innovation/generic/windows8_1-message/

  I guess that after the Win 8.1, nVidia graphics card upgrade works well also.

  Your comments would be greatly appreciated.

• Satellite C650 - black screen after BIOS update

  My Satellite C650 Windows 7 - won't start afte BIOS update / switch.

  Everything worked very well until the automatic update of Toshiba asked me to download and install the new BIOS update, I did. At the same session Windows and McAfee asked updated. I agreed to all. After all updates have been installed, turns off. The next day when I walk, I see only black screen. I also tried F2, F12 and drive recovery. Nothing happens!

  Any recommendation?

  Hey,.

  It seems that something was wrong during the update of the BIOS and so that you can t the computer unbootable. But I put t understand why you did the BIOS update. If everything works correctly, you can forget about this update. More if you do a BIOS update you shouldn't t run any other updates or programs that might affect the update of the BIOS.

  Anyway, in this case you can do nothing and you need professional help. Please contact an authorized service provider and guys can help you update the ROM module On the Web from Toshiba site, you can find a list of all the FSA:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good luck! :)

• Satellite Pro A300 - touchpad failed after BIOS update

  After that good BIOS update 2.00 to 2.10 / suggest by ALERT TEMPRO - http://support1.toshiba-tro.de/tedd-files2/0/bios-20091125132031.zip/ the touchpad of my Satellite Pro A300 - GR 1 stopped working.
  He appears under the name hidden in Device Manager. The State of the device - "this device is not present, is not working properly or is not all its drivers installed." (Code 24) "reinstall the driver has no effect of course. I can also access the BIOS utility when you start pressing F2.
  Running Vista Business 32-bit Edition.
  Ideas to solve the problem will be highly appreciated!

  Hello

  Normally, it should be possible access the BIOS, if you press F2, once you have turned on the laptop. Please check again and load the default settings there.
  And you cannot access the BIOS if you shut down the computer.

  You can use an external mouse on the laptop? Please check this too.

  I've also updated the BIOS on my Satellite A300 but I n t have a problem with the touchpad after the update.

• Satellite P100 - v4.70 update BIOS stuttering in games

  Hello

  I had a problem with the Bios v4.70. Since I flashed my BIOS I had regular stops in my games. Looks like the game crashes every 3 seconds for a short time. I got the BIOS v4.50 before without problem. I would use v4.70 because since the new version of my graphics cooling fan card responses to temperature again.

  With recent versions, that I had the problem the fan worked only when I pressed the temperature of the gfx over 104 ° C. seems there is an emergency program that starts the fan and keep running at a constant average level. When I turn on my pc, I have to repeat this procedure. It's pretty boring, so I was very happy to see that the new BIOS has solved my problem. Maybe someone knows a solution.
  I know there are already discussions with stuttering in the game, but the solutions won t fit for me.

  I use a pilot updated the gfx, because Toshiba release new ones.
  My system is a Toshiba Satellite P100-354
  Processor: 2 GHz dual core
  gfx: geforce go 7900gs 512 MB with forceware v185.20
  OS: Win Vista 32 bit Ultimate

  > I use a pilot updated the gfx because Toshiba release new ones.
  I think that's the reason. No Toshiba drivers don t have overheating protection and therefore the graphics card may be damaged. It s recommended to use the drivers from the site of Toshiba, because with these drivers, you are on the safe side.

  Check the Toshiba website for the latest drivers and I think that the problem will be solved:
  http://EU.computers.Toshiba-Europe.com/ > support & downloads > download drivers

• Satellite P100-196 - Bios (4.80) includes the update of the EC/KBC?

  Anyone know if the update of the BIOS of the Satellite P100 (4.80) includes the update of the EC/KBC? I downloaded the BIOS on this site and installed it but it does not show if the EC/KBC has been updated as well.

  If there is an update that is separated from the EC/KBC where can I download it?

  Hey mate,

  If there is no update EC/KBC special on the Toshiba site, I assume that it s included in the update of the BIOS. I've never seen such an additional update on the official website of Toshiba, so it seems to be a part of the BIOS update. :)

• Satellite L40 (PSL48E) - is not restart after BIOS update

  Hello

  My problem is that I have updated the BIOS and after that the machine does not restart. (Corrupt BIOS?)

  After that the BIOS updated (Satellite L40 PSL48E), reboot the machine and with the F2 key, I open the BIOS setup.
  I check the version of the BIOS (5.50) and complete the configuration of the BIOS. The machine must restart now...
  Not at all, the machine does not restart. No screen only the powerled lights.

  I can to fix it on my own as a BIOS reset?

  Thank you for the cooperation.

  It's strange because after that the updated BIOS update you can go into the BIOS.

  However, try to remove the battery and the AC adapter. Wait one hour and then put the battery back in and connect the AC adapter. Try again.

  If it doesn't work it is something wrong with the hardware or BIOS and must be checked by a technician for laptop.

• Satellite L30 - 14F - battery low CMOS and delivers after BIOS update

  For 1.5 years, I have a Toshiba Satellite L40 - 14F PSL4CE.
  I encounter the error of CMOS LOW battery but I was unable to find to replace. Where he is?

  Second problem: after a BIOS update (version of the site) with the same setting in Windows XP, after I left the lid downwards and then save the workbook hesitates for about 2 seconds and the music stops. These problems were not present before the BIOS update.

  Thank you for the cooperation.

  Hello

  The BIOS battery can be replaced by only authorized service. to do this the laptop everything must be dismantled. By the way: see s operating manuals. You will find info how to load the BIOS battery.
  If I remember correctly the laptop must be connected to the adapter sector more than 48 hours. Check in the manuals.

  Maybe is my bad English, but I do not understand second problem.
  Can you please try to explain it again? I'm sorry.