HP Envy m6-1178sa restoration incomplete
Model: HP ENVY m6-1178sa
Product number: C2C18EA
OS: Windows 8
I was faced with a problem with my installation of Windows and it seemed to be a problem with "KERNELBASE.dll. I was told that I should be reformatting my laptop so I have, using the recovery partition (I pressed F11 at startup and chose the minimized System Image recovery).
The recovery process seems to operate normally, but in the end that it connected me on one account labeled 'Administrator' and said that the restoration is incomplete. I opened the newspaper and everything was going well, apart from that:
[RegistryDevicesCheck]
Result = FAILURE
DEVICE FAILED #0:
Description: USB - IF xHCI USB Host Controller
PNPDeviceID: ROOT\UOIP_BUS_DRIVER\0000
Code : [ 31 ]
And then he said he ran the PININST (Mini-FBI) going on, and then it displays a list of log files that were the result of "SUCCESS."
How to turn off the phone and restore it to its normal operating state?
Press and hold the power button until the laptop turns off.
Restart the laptop, press the F10 key to enter the BIOS. Change the year in the BIOS for 2012. Save & Exit. Try to begin again resumed by tapping the F11 key immediately after starting.
Tags: Notebooks
Similar Questions
-
Bluetooth not working not not on HP envy m6 1178sa
Hello
Bluetooth does not work on my laptop HP envy m6 1178sa running WIndows 8. The option does not appear in the wireless settings screen.
All the troubleshooting it says ' USB - if xHCI host USB controller has a driver problem "and tried to reinstall the system, but not solved the problem."
Help, please.
Concerning
Reni
Hi ReniV, welcome to the Forums of HP. If the USB - if xHCI USB host controller port has a driver problem which could not be repaired automatically, try first to restore the Chipset from Intel using this method: use of the Recovery Manager to restore the software and drivers (Windows 8)
That corrects the error, test your Bluetooth again. If it doesn't work, restore your Bluetooth drivers using the same method.
Let me know how that turns out. -
J2S63EA #BH5: Watch restoration incomplete error and does not start
Some of my keys were not working nd varies touchscreen
I decide to use Recovery Manager to reset the default system
I waited for the sytem finish restoration
It boot after auto restart
It shows no logo
then watch date th hour almost immediately the
Go Manager recovery Windows telling me restoration is not complete
that I should choose between saving the details of the log and try again
Click try again without success
It starts not far from this point
pls help
This is my new laptop go and is not yet nearly a year, my father, it has for meTry the trick here:
-
Dear Sir or Madam
Hello
I have a problem, I do formats on my device when I recovery my information some bad Apps and I can not download from the App store such as pages and numbers and came to me this massage
"Restoration incomplete - some elements didn't can be downloaded from the store." If they are on your computer, you can restore them by syncing with iTunes. »
How do I sync and back up app?
Thank you
sincerely
Are signed with the same Apple ID apps were originally downloaded with?
Apps are bound to the ID that was used to buy them – if you are a second user on this phone or a different ID - then you re buying them from the app store -
I tried to do a Minimum of Image recovery, but it keeps failing at the end of the process. It only gives me incomplete restoration
on the recovery time I disconnect all devices and on wireless
and steps go all the way, show 'Recovery preparation is finished', then press 'continue' button to reset the laptop and upcoming windows then I got the incomplete restoration
my laptop model is-online pavilion dv6-2300
under the images show all the steps:
How to fix?
then reset and got the error message
Hi David
I does not work try your last answer because my problem solved
I create a post for this problem that your prior posts and my actions
resolved is =>
(Close the notebook. Tap away at f10 you start Notepad to open the menu of the bios. Under the Advanced tab or diagnosis)
1: disk hard main self-test
2: memory test3: wipe your hard drive with the drive to kill follow the description
(
Download and install Killdisk on the link below - (this application will write zeros to the entire disk and not affected your hard drive).
http://Software.LSoft.net/KillDiskSuiteFree-Setup.exe
Download and install ImgBurn on the link below.
http://download.CNET.com/ImgBurn/3000-2646_4-10847481.html
Access the application of disc kill you have installed in all programs, open the main folder, then select Bootable Disk creators, then the BACK Bootable CD Creator that will burn the ISO on a blank CD bootable.
During the following process do not worry about all warnings as your recovery DVDs will reformat the HARD drive.
Insert this CD into your laptop and restart to boot from the CD of Killdisk and follow the instructions on the screen to kill disk.
A brief description of the process here is Killdisk.
Use it to wipe the entire hard disk, highlight (80 h) and press f10 (you will also need to type a confirmation and press enter) - (this will make sure that you include all partitions and then start the process - this may take a few hours!).
When the process is complete go on 4: step
)
4: full format your hard drive again and allocated to your hard drive
5: reset and press f2 and smart self test and full auto retest your hard drive
6: try again minimized installationvery very, can you help me to solved restoration incomplete error
I have Bravo all your messages
Thanks David -
HP Envy M6-1178sa USB 3 detects no not disks
Have a HP envy M6-1178sa running Windows 8.
2 USB ports work fine and detect USB 2 and USB 3 devices devices. However the 3 USB port does not detect USB 2 or 3 USB devices.
Any suggestions please? I looked at the page drivers, but can't see anything that would help.
I finally found another thread that suggests to uninstall the drivers. Windows reinstalled them and the port now picks up devices.
-
HP envy x 2: restore HP Envy X 2 with USB
When I turn on / open my hp envy x 2 it brings me to the login screen. After I got the connection, the screen goes black and I can't do anything other than move the cursor. How can I reset with to be able to see the screen. ? I know you can use a USB key but how. ?
Hello
You do not have to reinstall the OS - try the following.
First of all, make sure you anchor the tablet on the keyboard section.
Start the computer normally, and then sign in.
Black screen, hold down the ctrl and alt keys and press delete.
Select Task Manager.
Click on file and select the new task.
Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.
When the system restore interface is loaded, choose a restore point at least 48 hours before the log - it occurs first and then proceed to the system restore.
If the above is not correct the problem, try to run the steps in the link below.
Kind regards
DP - K
-
DV6 7200ee desire: restoration incomplete error
I repeated it for my laptop and I have this problem (Recovery Manager window appears with the following error message when I click on the Details button):
file ctoerror. FLG
[21:12:12.07] ChkErrBB.CMD: detect an error in the PININST_BBV.
[21:12:12.07] ChkErrBB.CMD: check c:\system.sav\logs\BurnBootWarn.log
[21:12:12.07] ChkErrBB.CMD: or, visit c:\system.sav\logs\BurnBootMerge.log
[21:12:12.08] ----------------------------------------
[21:12:12.08] critical error condition has been detected to BBV1...
[21:12:12.08]
[21:12:12.08] see the following text of the file if it exists.
[21:12:12.08] - c:\system.sav\Logs\BurnBootWarn.log
[21:12:12.08] - c:\system.sav\Logs\BurnBoot.log
[21:12:12.08]
[21:12:12.08] Switch to 2ndCap WinPE and the show [Recovery Manager] incomplete dialogue.
[21:12:12.08] because the dialogue of RM cannot appear on the screen [start] on Win8 environment.
[21:12:12.08] customer may not notice that RM already shows the error dialog box.
[21:12:12.08]
[21:12:12.08] ----------------------------------------
There might be an unexpected reboot during the PBO clean or last...
The process will cause panic CTO because the image isn't normal...Please help me to restore my windows again!
TitoNabil wrote:
If its noway my windows again...
Please help me...I did exactly that.
Have you contacted HP at the URL I provided in my previous answer?
To fix what you've done for yourself, the less expensive is to contact HP and order a restore for your laptop USB.
-
System Restore: restore incomplete, your computer cannot be restored
When I run the system restore, it goes really fast. Then when the computer is restarted, the said dialog box: incomplete restore your computer cannot be restored: regardless of the restore point I had chosen. No changes have been made to your computer. To choose a different restore, restsrt system restore point.
You can give me any help will be greatly appreciated, thanks again.Troubleshooting in Windows XP system restore
http://support.Microsoft.com/kb/302796or http://bertk.mvps.org/html/error.html
Everything you wanted to know about SR - http://bertk.mvps.org/index.html
-
Original title:
I can not get the system restore to run even in safe mode. When restarts windows, I get the message "incomplete restoration cannot be restored" date I'm going home. Can anyone help?
Try to configure Windows XP to start in a "clean boot" State, and then try to perform the system restore.
How to configure Windows XP to start in a "clean boot" State : http://support.microsoft.com/kb/310353
-
Restoration incomplete background in the foreground
Hello
I use the method suggested here
for transitionening of foreground to the background to the foreground. I noticed on os6 it worked very well. On os5 I often see that the restoration is incomplete! This means that some fields have become null! More specifically, I have 3 editFields (static), they just return null. Is - this unwritten rule that the user interface must be re-created each time and we shouldn't assume that the UI widgets would survive the transition all the time?
Thanks for your comments.
I use Eclipse with jre 1.5 and 5.0 plugin.
I have found the problem. I was doing something dubious and the updating of the UI widgets without eventlock. Tests to see if this removes the problem. I also removed static - lying areas of the problem.
Still welcome any additional info, if someone has.
THX
-
HP envy h8-1534: restore
How can I get a recovery disk to restore my system to default settings?
Jofiii, welcome to the forum.
Here is a guide to help you order the recovery media for your computer. Also, here is one the System Recovery / backup & restore section for the computer.
Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.
-
HP Envy 15-k201na: restore to the factory settings corrupts the files/windows Boot Manager
I wanted to restore my computer laptop back to factory settings. So I went into settings and navigated to the update and recovery, recovery and then clicked the option restore factory settings. I had several partitions then asked me if I wanted to delete all of my drive or to remove all the windows disk was installed on. I clicked on the remove all option. Everything was erased from my laptop, I think that the boot partition has been altered to. Now when I start my laptop 0xc00000000f error code occurs and he said: 'you will need to use recovery tools. If you don't have any facility (such as a disc or USB device) support, contact your administrator for PC or PC/manufacturer. »
Is there a way to fix this? My laptop still warranty HP on this subject.
A system image restore fixed my PC; I used recovery media to recreate the image on my PC.
-
HP ENVY m6-1178sa: broken hinge of m6 HP Envy
Hi, I've had this laptop for a while now and is out of warranty, but my hinge is now to the point where I have to close it very slowly for fear of breaking the screen. It is mainly the right hinge but the left is showing signs of that also. could you please tell what you, or else I can do about it because it's obviously a design flaw that was never really given on.
Concerning
Gerald
I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display personal information (serial numbers and information).
If you are unfamiliar with the operation of the function of the Forum, private messages you can learn it all here.
Thank you for visiting the Forum from HP Support. -
I need Windows 7 64 bit drivers for HP ENVY m6-1178sa
Hello
I have downgraded to windows 8 for windows 7 64 bit and has difficulty finding drivers! Help, please!
Hello:
All the drivers for this model should work except the video.
For video, use this driver.
ACPI, use this driver...
Maybe you are looking for
-
Photo library is missing in iMovie
Hello In iMovie-> my media-> library, I have NO 'Libraries of Photos' for some reason any. It's very annoying. Does anyone know how to get that back? Also note, I have two libraries iMovie for a reason any. No idea why this is and how to get back
-
How long should I until I can make longer transitions from 01:00 clips?
(It's one of those 'is it me? Or the software? Or just tired? ("things.) I'm working on the project where - it seems - almost all of the clips are "too short" and require the FCP create transition (using what used be called the ripple tool, I think).
-
Dual boot between the preinstalled Vista and Linux
I think installing dual-boot between Linux systems, for this I need to repartition the hard drive and reinstall vista and vista pre-installed that I na? t have the disc so that I only have recovery. Assuming that the operating system is on the machin
-
Find the number of license for LabVIEW program?
HelloMy name is Cleber, I am of the Brazil.I'm trying to find a role in the LabVIEW programming that I return the license number and the user name for the license. In vain so far. I thought I returns the ofLabVIEW type installed, but I need this info
-
Since the last loading Office mgr, Sync does not synchronize the calendar, addressbook. Tried resetting the configuration, nothing helps.