HP Envy TouchSmart j003TX Beats Audio not work

I recently my phone drivers and bios updated the software updated, HP Support Assistant, because I've upgraded to Windows 8.1. Suddenly, my laptop goes to a BSOD whenever I play games like Crysis 3, etc. I discovered that the problem was on the new Intel HD Display driver for Windows 8.1, then I went back to previous drivers for Intel HD. That solved the BSOD problem. But, I just noticed that I can not access the control panel of bat, and whenever I try to open it, a pop-up message indicating, "IDT Audio from PC has stopped working" suddenly pops out.

Please help me solve this problem. I tried to install/reinstall drivers Audio IDT, even tried on the old drivers of win8, always returning to nothing does not...

Thank you!

Hello

Try this one... Uninstall the existing drivers and install it from the link below

http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124012-1&cc=us&DLC=en&LC=en&OS=4158&product=5386851&sw_lang=

Tags: Notebooks

Similar Questions

  • HP Envy X 2 Beats Audio works is not after update 8.1

    Hello

    Just updated to 8.1 windows and now my audio beats does not work on my HP ENVY x 2/tablet. I'm under the product name for the 32 - bit, windows 8.1: PC HP ENVY X 2, product number: C7F27AV serial number: 4CN312078X. Also my headphones do not work.

    Hello

    Try to install the driver pack Windows 8.1 for your laptop on the following link.

    http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63677.exe

    When the installation is complete, restart the laptop.

    When windows has reloaded, if you still have no audio output, open windows control panel, open Windows Update, select "View update history" in the left pane and then select "Installed updates" link in the next window.

    Locate the KB2962407 update, right click and choose uninstall.  Once completed, restart the computer, open windows control panel, open Windows Update and select "Check for updates".  You will see the update that you have uninstalled just offered once again - right click and select "Hide update".

    Kind regards

    DP - K

  • Beats Audio Equalizer WORKS DO not after upgrade to Win 8.1

    Hi I have no model for the All - In - One HP ENVY 23:23 c010xt.

    I was 'forced' to Win 8.1.  I had been checked "remind me later" for months until it just went ahead and did it.

    I am Livid at the fact that the graphic EQUALIZER Beats Audio is disabled.  The sliders on the work left, but you cannot adjust the sound as you can with an equalizer.

    I searched the web for hours, days and ALL tried.  I have no doubt the most recent driver (after unistalling/reinstalling, etc. etc.).  It just is not supported in win 8.1, apparently.  He worked much to gain 8.

    I don't know if I'm more angry with Microsoft, HP, or beats.  One or all of them dropped the ball here.  This computer as $1 K and the Beats Audio was a key reason I bought it.  It is simply unacceptable, pathetic.

    I have $800 paradigm Millenia spekers and listen to a lot of records on the ground that need EQ.  where MS, HP, nor beats will solve this problem, which seems likely since the problem seems to have been around for a while, can anyone suggest a sound card, or driver or software 3rd - party who has an equalizer that affects all sounds, including Youtube & Vimeo?  Realtek?  SoundBlaster?

    There only seems to be a lot there - that's why the beats Control Panel was really great when it worked

    George

    Hello

    Try installing this driver that should help

    IDT High Definition Audio Driver

  • DV7-7012: Beats Audio Panel works do not (it's there, but it does nothing)

    I had to make a Windows 7 in place 'upgrade' to repair a damaged system.  The new version of windows was the same as the old (win7pro 64-bit) and I eventually installed all the patches and updates.

    But now my Beats audio Panel does not work.  No error message, just no response.  I have uninstalled/reinstalled the IDT pilot softpac (SP 59766) several times, in several ways... the result is always the same.  All the sound elements work, the driver gets in, the control panel disappears as it should during uninstallation and reappears later... but when I click the icon, nothing happens.

    • Beats audio icon appears in the notification area of the task bar and in the control panel
    • Features audio of"work", but the special effects microphone settings are all wrong and nothing else seems to have an impact on them.
    • Looking at the process manager, there is no process named "beats" or "idt" - don't know if there are supposed to be.  If I click on the icon of beats, for about 1 second, there is a marked process IDTNGUI.
    • Looking at the windows event viewer, I get the following error message:
      The failing application name: IDTNGUI.exe, version: 1.0.6418.0, time stamp: 0x500e5e6a
      Name of the failed module: KERNELBASE.dll, version: 6.1.7601.23455, time stamp: 0x573a54fc
      Exception code: 0xe0434352
      Offset: 0x000000000001a06d
      The failing application path: C:\Program Files\IDT\WDM\IDTNGUI.exe
    • Looking further, I see that the. Net4 DURATION breath also on:
      Application: IDTNGUI.exe
      Version of the Framework: v4.0.30319
      Description: The process was completed due to an unhandled exception.
      Exception info: System.IO.FileNotFoundException
      at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal (Int32, IntPtr)
      at System.Runtime.InteropServices.Marshal.ThrowExceptionForHR (Int32)
      to the millisecond. Internal.NativeWPFDLLLoader.LoadCommonDLLsAndDwrite)
      < module >. CModuleInitialize. {ctor} (CModuleInitialize *, empty ())
      module <>. ? A0x6065ba78.CreateCModuleInitialize)
      module <>. ? A0x6065ba78. ?? __E ? A0x6065ba78@cmiStartupRunner@@YMXXZ)
      < module >._initterm_m(void* () *, Void * () *)
      < module >.   < CrtImplementationDetails >. LanguageSupport.InitializePerAppDomain
      (< CrtImplementationDetails >. LanguageSupport *)
      module <>. < CrtImplementationDetails >. LanguageSupport._Initialize
      (< CrtImplementationDetails >. LanguageSupport *)
      module <>. < CrtImplementationDetails >. LanguageSupport.Initialize
      (< CrtImplementationDetails >. LanguageSupport *)

    Missing DLL?  Missing registry keys?  Missing language files in .net?

    HELP... my mike is mainly offline until I fix this.

    Thank you

    Uninstalled all IDT package.  Reset.

    Reinstalled all package IDT.  Reset.

    Now that .net works, therefore Beats!

    Then... SOLVED!

    NOTE: it really matters what version of the IDT drivers that you install.  ... Then the SP of another model cannot work at all, or further damage the situation.

  • Beats audio software works is not in windows 8 pro

    Hey guys I have a 3040nr Hp Envy 15 with windows 8 pro. I have the sound with the IDT driver for windows 8, but for some reason when I click on the button audio beats, the program appears it dosnt seem to work. Guy can you tell me if this would work on Windows 8?

    OK, so I found the software on the control panel. the driver needs to be updated so I can open it again with the button of beats. but here are the steps to manually open on windows 8.

    1. go in Control Panel (hold the Windows button + E so you can open the computer folder and then move the mouse over the computer tap and you can see open Panel on the right)
    2. then click on hardware and sound
    3 beats audio sign should be last on the list

    It should work on all windows 8

    and you need the lates IDT driver for your computer for you to get that you need to go here.

  • HP ENVY 4 1070EL: Beats Audio crackles

    Hello

    I have a problem with my HP Envy 4 (1070EL), which is equipped with BeatsAudio, whenever I have would be the option 'Beats Audio"of Control Beats Audio Settigs sound would develop more rich in quality, but it will make a crackling sound which makes me cut my ears of my head hahaha.

    With a little research I found that maybe it's a cable that is not properly insulated or dirty speaker and it started to happen just after I recived of warranty

    must I return again? warranty

    also my bluetooth driver appears as unknown device even after you install the appropriate driver and restart the computer

    I hope that this message is clear

    Hi @biolan,

    Thank you for posting. I read your post, and I understand that when you activate the audio Beats, crack you through the speakers.

    The Beats audio works just before?

    Please uninstall all audio drivers in Device Manager, and then run HP Support Assistant to install and update the audio drivers again.

    To the problem of bluetooth, you can follow the document below for troubleshooting.

    HP Notebook PC - setting up connections Bluetooth (Windows 7)

    Let me know if it works for you.

    Kind regards

  • HP ENVY m6-1125dx: Beats Audio In/Out-put pilot missing AFTER Factory Reset/OfficeProgram reinstalling Windows

    Hello

    So about three months ago I had a problem with my HP mouse and browser. both were glitching on screen and does not allow me to type consistently or right-click (to copy, paste, etc.). After seeking help from technology College friends, HP reps (which were not useful since my ch isn't under warranty anymore) and work friends, no one would understand it. I decided to make a setting reset according to which did not help. Then, a factory reset. Finally, it fixed my problem, yay no glitching more! So I contacted Microsoft to reinstall my Microsoft Office. After I have reset a computer and everything was in order, I hung up with them. By attempting to play a video a few moments later, I noticed that my volume is not working. I tried through the Troubleshooting Device Manager (replied 'No audio device found'), by lifting missing audio drivers via the HP Web site (found nothing) and call Microsoft to see what they could do since HP reps no help. So far, no progress is possible except that Microsoft has discovered that he is no longer an audio in/out located on my device. This is absurd! My laptop was purchased 2 years ago for around $500 with award-winning special Beats Audio Sound System. I want to come back. I was forced to resolve the previous question myself and I wa slucky enough to find a way. But now, I am presented with an audio problem I'm afraid that I can't solve in my favor.

    If someone who comes through my investigation has informed business and education with a solution to the please my problem do not hesitate to contact me with your advice and your credentials. I'm willing to try anything at this point, but of course not at the expense of my computer. Experienced responses welcome!

    I hope someone can help me. Manager Microsoft is kind enough and plans to call me again today at 15:00. But, I really don't think there is anything else on our end that we can do. It's all HP to reinstall the audio driver Beats for me once again.

    Thanks in advance.

    Hello

    I do not work for a hardware or software company. Since your machine drivers support site, available for Windows 10, only the drivers that came with your machine (for Windows 8). Driver for Windows 8 above should work as ask you 'pilot missing AFTER factoryreset/windows.

    Kind regards.

  • envy K220 nr: beats audio for windows 10

    After you have installed windows 10, beats audion is not entirely worked. Beats audio is present, but I can't enjoy the sound as it was before installin windows 10. It was working fine when newly purchased and windows 8 built in already. I installed almost all software audio, but in vain.plz help me to reinstall the beats audio entirely take I could enjoy original sound of bat audio.thx

    Hi, Shaw, how are you doing my friend?

    Please, run the hp support assistant and update all drivers and bios ok:

    http://ftp.HP.com/pub/SoftPaq/sp74501-75000/sp74656.exe

    I hope that helps!

    I would give a great kindness...

    If the question is clarified, mark my answer as "solved" and click the icon of the 'hand' to provide 'Congratulations' in recognition.

    Have a great week!

  • Audio not working do not after Windows 8.1 update

    Hello

    A few days ago that I have updated Windows 8.1 evaluation to the full version 8.1 and since then my audio doesn't work. In Control Panel, "Digital Audio display (AMD high definition Audio Device)" is listed as disconnected. The audio icon on the taskbar is XE out and clicking on it works the finder error in vain. Speakers no longer appear in the list of devices well now that nothing works I don't know if they have ever or if the audio comes through display Digital Audio. Headphones do not present as playback device and the volume on the keyboard controls and the taskbar are not accessible. I've never used external speakers.

    Windows 8.1 update seemed to wipe all my software HP and AMD came with the laptop so I reinstalled the HP support center and looked for a driver updated and all that jive, but all also shows to date. I don't know what else to look for because most of the forums I've seen seem to speak of their output HDMI sound does not work when it is connected to a TV and I just try to have sound, period.

    HP ENVY Notebook PC m6

    D1C68UA #ABA

    8.1 Windows 64-bit
    APU A10 - 4600M AMD with graphics Radeon (TM) HD
    AMD Radeon HD 7660G
    AMD High Definition Audio Device

    Thanks in advance to anyone who can help you. It has been a few days and it's quite annoying when all was dandy just before the update.

    Chris

    Hi Chris,

    Try the following.

    Download IDT Audio Installer on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59861.exe

    One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  If you see a very similar entry for (or entry of IDT) IDT HD Audio , right click on the device and select uninstall - you should also get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.  If there is no input IDT, go just below.

    When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

    Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

    Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

    Kind regards

    DP - K

  • ENVY 17 j141nr: Beats Audio driver gone

    I had problems with my upgrade for Windows 10 of 8.1 and the fix was to re - install Windows from a boot disk. Now that I did, the re - install appears to have removed all my for Beats Audio and a few other drivers (HP drivers for my biometric scanner, etc.). I'm not entirely sure where to go to download these drivers, or if they work with Windows 10.

    Details:

    My computer will play sound on the speakers by the pad, but the Beats loudspeakers above the keyboard do not play good at all.

    I have reset the audio driver, but the Beats Audio driver is not found.

    You can download the drivers from this link:http://www8.hp.com/us/en/drivers.html.

    Note: If you can not find the drivers for windows 10 right now from this support site, you can download and install the drivers for windows 8.1.Most of them works also with windows 10.

    You will get Beatsaudio driver & software automatically when you install Realtek Audio Driver.

    [You can also get drivers from windows update, but you won't find that all Windows update]

  • HP Envy Phoenix: Disabling Beats Audio Sound card in desktop HP Envy Phoenix

    Here's my problem, my HP Envy Phoenix office above came with Beats Audio standard install, I installed a new card his SoundBlaster Audigy 5/Rx installed fine, but one of my audio editing programs says

    The output of the sound card could not be defined at this sampling frequency: 44100 Hz

    Either the device does not support this sampling frequency, or it is in slave mode and its sampling frequency cannot be changed by elements of WaveLab. So how do I know if my new sound card is running in slave mode and how do I change this? or maybe disable the card Audio Beats?

    Thanks in advance,

    SP60

    SP60, welcome to the forum.

    Beats Audio should automatically be turned off when the sound card is installed.  However, you can go to the control panel Audio Beats and uncheck the "Set as default device".  You can do this with the recording device, too.

    Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

  • HP Beats Audio dosent work after Total PC Refresh!

    I can't get my Audio Beats equalizer to work after updating of the computer

    I have a: HP ENVY m6-1103so

    Hey MiniFix2311,

    Try to uninstall your sound driver in Control Panel (should be called IDT Audio Driver or similar), then install the latest version: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-112832-1&cc=us&dlc=en&lc=en&os=4132&product=5312254&sw_lang=

    Let us know what happens!

  • Webcam HP TouchSmart want 20 will not work if Windows 8 installed Ulead VideoStudio 11.5

    I recently got the new TouchSmart HP Envy 20.  I installed the Ulead VideoStudio 11.5 on the computer, the webcam video editor, stop working.  I ran the video editor, it wouldn't load a video.  I tried to uninstall the program, it came with errors.  I got it all fixed.

    I used the free Revo Uninstaller to remove forcibly Ulead VideoStudio 11.5 of the computer.  Webcam still does not work.  I looked in the MSCONFIG startup list, the Ulead VideoStudio 11.5 was in the list.  I have disabled this program, restarted the computer.  The webcam came back alive!

    Hope this will help people who have similar problems.

    Best regards-

    Hello ThatsDave,

    Thanks for the information. I saw a couple webcam related questions about Touchsmarts so it is good to know that there may be a conflict with this particular software.

    By chance did you advised the Ulead to the same question?

  • HP Envy 2136nr: IDT Beats Audio - release system

    Hi, I'm having some trouble using Windows 8.1 with the latest audio drivers for my machine (8.1/64-bit Windows ~ sp63555). I did not notice problems when I installed it initially, but now, I feel the random system crashes when the machine is audio playback. For example, play youtube videos or a playlist of music it can freeze for 15 seconds when trying to play every three videos/songs.

    The verification tasks manager reveals that he, "Windows Audio Device Graph Isolation" the help of ~ 100% of my band hard drive bandwidth.

    I tried uninstalling and reinstalling my drivers but the effect is always the same. However, I noticed that using the machine without drivers HP I don't seem to have the problem more (but could not use the headphone or mic ports).

    Y at - it a newer version of the drivers that doesn't have this problem?

    I wanted to just come back and say, I finally found a solution to my problem (for someone else who might stumble upon this thread in the future).

    After removing the drivers IDT and Beats Audio of my machine software is uninstalled, it works now. It seems I missed uninstallation of software then the first Beats which caused strange behavior with the headphone/mic port.

    Actions Windows drivers work fine and I have more any stall or delays playback (Windows Audio Device Graph Isolation/audiodg.exe) system. The sound quality is more or less the same as before and the acoustic Panel now has access to the tab of the unavailability.

  • HP Envy 14 HEADSET MICROPHONE DOES NOT WORK

    Hi, I have a HP Envy 14-1111 nr laptop computer with Windows 7 and I always had problems with working microphones. I plug in my headphones and put plugs in the appropriate ports, including through taking Mic in port with a picture of a headset/microphone. I also put the audio plug on the correct port.

    The audio still works fine I can hear things properly from the helmet. But the microphone NEVER WORKS. I made sure the microphone is on and I put the headset microphone as the default recording device, and made sure it's not muted and even tried like 3 different types of helmets, but it still does not work.

    My computer recognizes my headset has a microphone when I plug it, because the independent headset appears on my recording devices. But any point the noise I into the microphone, my computer does not recognize him. Basically, it is saying that it cannot detect all the sounds of the mic.

    It's incredibly frustrating because I spent money on different microphones, but now I think it's the fault of my computer. Is there something wrong with the microphone/headphone jack? What can I do to fix this?

    Thank you.

    Solution: the HP Envy laptop is not a microphone jack, it has a "headphone" which is designed to work with smartphones.

    In order to use a headset with microphone with this computer, you need a conversion cable so that you can convert your helmet at the exit of the smartphone. I just ordered it on amazon, it should be here soon.

    http://www.Amazon.com/headset-buddy-01-PC35-PH35-smartphone-BlackBerry/DP/B002SK66OY/ref=sr_1_4?ie=UTF8&QID=1367377726&SR=8-4&keywords=headset+to+Smartphone

    Boring, but at least I think it is resolved.

Maybe you are looking for