HP Envy Ultrabook 6 t-1000 BSOD - iaStor.sys
As I was using my laptop, I noticed that the antivirus software, Malwarebytes, asked that I had to restart my laptop. So not much and I restarted. Now, whenever I turn it on it gives me two options: '(recommended launch Startup Repair' and 'Start Windows normally'. If I choose 'Launch Startup Repair', it brings me straight to the BSOD. If I choose "Start Windows normally", it takes back me to two options. Now, I tried to go to three different types of Modes safe, but just brought me two choices of before which leads to the BSOD. The BSOD said:
STOP: 0X0000007E (0XFFFFF88001681026, 0XFFFFF88002F499E8, 0XFFFFFFFFC000005, 0XFFFFF88002F49240)
isStor.sys - address FFFFF88001681026 base at FFFFF8800163A000, DateStamp 4ed5a567
PLEASE HELP ME! I AM IN DESPERATE NEED! I literally just go this laptop.
You have run HARD drive Diagnostics in the Diagnostic Menu advanced HP?
Press the power button and immediately start receiving the Esc key. In the menu that appears, select the F2 key to see the HP Advanced Diagnostics menu, and then click the hard drive test. If the test fails, then contact the for a replacement hard drive warranty if you feel comfortable with to replace yourself. Otherwise ask the Customer Service on how to send it in for warranty repair.
Tags: Notebooks
Similar Questions
-
HP Envy Ultrabook 6 t-1000 CTO: HARD drive is not displayed
Hello.
I had the Windows Blue Screen of Death (BSOD) once or twice when using simple everyday applications on my Ultrabook. The results were either not different on Mode without failure. After awhile, I started having 'No Bootable disc' error while starting up. Recovery (press F11) will not appear so. I tried the HP Diagnostics (by pressing F2 at startup) and Test the hard drive as well as the Test of memory shows PASSED on the formats of short or long.
I tried the following:
1. I did some research on Google and entered in the BIOS/Insyde utility (by pressing F10 at startup), loaded default installation (by pressing F9), saved changes and did a restart, but I get the error again.
2. I downloaded Windows 7 64-bit Microsoft store, created a boot USB and plugged. I was able to access the Windows Installation Page, but he wouldn't show my hard drive at all.
3. I find the support page of my product on the site HP and downloaded the latest drivers, put it in a USB device and booted up the system from the Windows Setup disc. On the page where it was supposed to show my internal hard drives, it showed only USB drives and there is an option "Load Driver" I clicked on and selected the driver files I downloaded from the HP website. Everything was going well until I chose iaStor.inf... this time, the system has hung up and the BSOD appeared with an error stating the file 'iaStor.sys '.
My questions:
1 if diagnostic Tests are passed, I can assume that the material is well?
2. Although I already placed an order for HP recovery discs, I doubt if it could help because my HARD drive drivers seem to be missing. What is your opinion?
3. is there a way to reset zero/reload drivers BIOS/Insyde utility?My system features:
Laptop model: PC portable HP Envy 6
Product no.: A9G58AV (the back panel laptop says A9G30AV)
{Information}
Processor: 2nd generation Intel Core i5 - 2467 M CPU @ 1.6 GHz + Intel HD Graphics 3000
BIOS version: F.0D
Total memory: 4 GB
Operating system: Genuine Windows 7 Home Premium 64-bit
HARD drive: 500 GB 5400 rpm SATA RAW 7mm hard drive with 32 GB WSSD faster reduction of the hard disk CacheUnfortunately at that I disagree with Paul and I think that you may be looking for a bad motherboard, but we would like first to try to remove the disc of WSSD 32 gig.
Here is the Manual:
See Page 40. Unfortunately, this model is a little difficult to disassemble, but measures are set out in the manual. If it is still under warranty, you can't do that. If the hard drive passes the test of F2 then I tend to think that it's not the hard drive.
-
Question for a memory upgrade ENVY Ultrabook 6 t-1000
There is no sign of memory on this machine, so it seems that I have to remove the front panel together in order to access the memory. I don't want to damage the computer so I would appreciate some advice on how to do it properly.
You will need to remove the case _ all background there are 12 screws now in place.
Go to your model as seen in the screenshot, and when you get to the appearance of the video page for Basic wardrobe in the left column.
http://h20574.www2.HP.com/default.htm?lang=en&cc=us&hpappid=psml
Make sure you are connected before you click the link and give time for the video to load.
After you remove the base, click on the video of memory because you have to follow some precautions.
-
iaStor.sys BSOD on my new satellite U series
Hello.
All of a sudden without any update, or a new program installation, my laptop start BSOD (BSOD iaStor.sys & iaStorA.sys) and restart...
* Both on safe mode and normal mode.
* I try the last known good configuration, but nothing.
* I also tried to system restore to another point of restoration, a few days before that the problem but nothing.
* I tried with a lot of viruses/malware/rootkit programs, but nothing. It's clean.
* I tried to uninstall/install but intel rapid storage driver nothing.
* I uncheck in msconfig-> services menu but nothing.
* I have uninstall antivirus.
* I went to the bios and I load the default settings.
* I uncheck everything in msconfig--> startup.* Finally, I did system restore settings by default, but when I go to the last menu, I had the same BSOD... Help, please. I don't know what else to try! :( :( :( . Any idea? The laptop is new. I have only two months. He is too young to go to toshiba service :(
http://imagizer.imageshack.us/v2/XQ90/594/xijw.jpg
http://imagizer.imageshack.us/v2/XQ90/819/3ec1.jpgThe screenshots of the blue screen shows the details of the file iastor.sys.
This file iastor.sys belongs to the SATA controller driver.Especially this kind of BSOD would appear if you must pass between the compatible mode (IDE) and AHCI in the BIOS.
It could also be that the HARD internal disk works badly or the HARD disk controller.
But I think you should start the basic principles which is the replacement of the HARD disk.
The warranty is valid?
I recommend you contact a technician because in this case, the warranty would cover the repair costs in case of valid warranty. -
HP ENVY Ultrabook 6-1109tx: BIOS administrator password
Trying to boot in the bios Administrator password appears then after three attempts unsuccessful system off code 87335668 need help
HP ENVY Ultrabook 6-1109tx
Thank youHello
Try:
38093268
-
where it is the serial number on a HP ENVY Ultrabook CTO 4 t-1100
Hi, I have a HP ENVY Ultrabook 4 t-1100 CTO I upgrade the hard drive and I'm going to install windows 8 now but I can not find the license number for windows 8 as traffic laptos bring inside on a sticker.
Thanks to advanced
Oh I formatted my laptop and delete the hp recovery partition and I install a windows 8 pro that I bought with the new microsoft system have means that I can't install windows 8 accompanying laptop when I first bought?
-
HP Envy Ultrabook 4-1112TX: start the device not found
Hi, the water had spilled on my laptop when it is turned off and disconnect with fees. After I try to dry it in the Sun after it dries I try to turn it on. But I saw this post about it not found 'Boot device. Please install an operating system on your hard drive. "HDD (3fo) F2 diagnostics system for more information, please visit:www.hp.com/go/techcenter/startup '. I just want to know if the laptop is really damaged or not my laptop is the hp envy ultrabook 4-1112TX
Sorry to be the bearer of bad news, but any TIME you spill water on your laptop, it will do SOME damage ‑‑ the only question is, how much!
You can work through the details in this thread to see if something helps you: you just spilled water or coffee on your laptop - what you need to do here is
You should also try the steps in this thread to see if the hard drive has failed: test a hard drive in the BIOS. HP® customer support
If nothing helps, your only recourse is to take the laptop to HP Service Center where they can disassemble, assess the damage and see what is involved in repairing it. Here is information on Service Centers: HP Notebook PC - use a repair center certified HP to repair a laptop | HP® customer support
Good luck
========================================================================
I'm a volunteer and I do not work for, or represent, HP.
---------------------------------------------------------------
If my post helped you, please click on the symbol of the thumbs-up to the left of the answer key to say thank you.
If my message solved your problem please click on "Accept as Solution" - to help others to find the solution.
======================================================================== -
HP ENVY Ultrabook 6-1106tx: USB - IF xHCI USB Host Controller problem
Dear Sir
I hope you will be fine. My name is Rana Imran and I use HP ENVY Ultrabook 6-1106tx with Windows 8.1.
I think I have the USB - IF xHCI USB Host Controller driver problem. I send you pictures of the problem. Please solve this problem.
Thank you
Hello
The first suggestion I want to do is to download and reinstall the switchable graphics driver on the following link as it lists a fix for WIDI.
When reinstalling com [full, restart the laptop.]
If you find that this did not correct the problem, try the download from Intel on the link below.
https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=23861&lang=eng&ProdId=3227
Kind regards
DP - K
-
HP envy ultrabook cl 4-1043: flashing screen laptop computer
This problem started a few days ago. Whenever I try to turn on my hp envy ultrabook, it is not completely up. It doesn't give me a flashing blue screen. Anyone know what could be the problem?
@beto84 ,
Hello and thanks for the display on the HP support forums. So that I can better you help with your problem could you please post back with your product number. Please provide the model number however the number of product be useful for accurate documentation of your system.
How can I find my model number or product number?
Thanks again for posting and I would like to hear from you soon.
Have a great day.
-
HP Envy Ultrabook 4-1101ea upgrade to SSD
Product name: HP Envy Ultrabook 4-1101ea
(http://h10025.www1.hp.com/ewfrf/wc/product?product=5311077&lc=en&cc=uk&dlc=en&lang=en&cc=uk)
OS: Win8 64bits
So recently my laptop has had a dead HARD drive, and because my warranty is no longer active, patients have to pay to replace. So, I decided I may as well remove the HARD drive and get a SSD to replace the main drive.
The only problem I have is that I never recived one Win8 disc, it came pre-installed on the laptop (no CD drive). If I had to get a new drive, how would I go about moving on my windows install? (Really want to buy a second copy for the laptop) Is it still possible?
Of course cancel the guarantee is not something that is particularly important to me, and exchanging components of PC is nothing new to me, however Exchange disk main hard of a computer with a copy of windows that I don't want to lose is something I've ever done. If all the advice, specifically related to windows issue, would be greatly appreciated.
Hello:
The W8 product key is encrypted in the BIOS.
Download this ISO OEM W8 file and use it to install W8. He will work with the product key in the BIOS.
https://docs.Google.com/file/d/0B0W9PBigPy94aVJWSndyTFNFMzg/edit?PLI=1
Then use this tool to make the file ISO bootable on a key USB 4 GB or DVD.
http://www.microsoftstore.com/store/msusa/HTML/pbPage.Help_Win7_usbdvd_dwnTool
-
HP Envy Ultrabook 4: Power on password or admin password?
My laptop HP Envy Ultrabook 4 keeps giving me a problem when booting. Ask an administrator password or power on password. None of my passwords work and it crashes me and gives me a code.
My code is 85374293
Hello
Use the code to reset below
30052815
Or generate it from the link below
1. use the unlock code you generated to enter BIOS
2 disable all passwords that are enabled in the Security menu of BIOS.
3. If the request for current password - enter the unlock code
4. for the new password, simply press the ENTER key
5. repeat the same thing to check the password column.
-
Iastor.sys and Bsod CPD watchdog
Hi I have an ASUS g series, and I get Iastor.sys bsod when I connect and if it doesn't I receive watchdog dpc randomly
JAS
These related iaStorA.sys Intel Matrix Storage Manager driver from Intel Corp. I'd install the most recent driver available, even if it is the same date that drivers become corrupt. If you have a SSD or hybrid, I would also like to update the firmware.
If you continue to plant I remove McAfee and use the built in Defender in his place.
Microsoft (R) Windows debug 6.3.9600.17029 AMD64 Version
Copyright (c) Microsoft Corporation. All rights reserved.Loading dump file [C:\Users\Ken\Desktop\061614-139437-01.dmp]
The mini kernel dump file: only registers and the trace of the stack are availableSymbol of validation of the path summary *.
Location of response time (ms)
C:\Users\Ken\Desktop OKSymbol of validation of the path summary *.
Location of response time (ms)
Deferred SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
Executable search path is: C:\Users\Ken\Desktop
Windows 8 Kernel Version 9200 MP (8 procs) free x 64
Product: WinNt, suite: TerminalServer personal TerminalServer
By: 9200.16424.amd64fre.win8_gdr.120926 - 1855
Computer name:
Core = 0xfffff802 '21c6e000 PsLoadedModuleList = 0xfffff802' 21f38a60
The debugging session: 10:56:47.776 Mon June 16, 2014 (UTC - 04:00)
System Uptime: 0 days 0:01:26.465
Loading the kernel symbols
...............................................................
.......................
Loading user symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck analysis *.
* *
*******************************************************************************Use! analyze - v to obtain detailed debugging information.
BugCheck D1, {44, 2, 0, fffff8800167920e}
WARNING: Unable to verify timestamp for iaStorA.sys
ERROR: Module load completed but symbols can be loaded for iaStorA.sys
Probably caused by: iaStorA.sys (iaStorA + 1a20e)Follow-up: MachineOwner
---------0: kd >! analyze - v
*******************************************************************************
* *
* Bugcheck analysis *.
* *
*******************************************************************************DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access an address pageable (or completely invalid) to a
application interrupt level (IRQL) that is too high. It is usually
caused by drivers using a wrong address.
If the kernel debugger is available, get a stack backtrace.
Arguments:
Arg1: 0000000000000044, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff8800167920e, address memoryDebugging information:
------------------READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80221fc4168
GetUlongFromAddress: cannot read fffff80221fc41f8
0000000000000044 non paged poolCURRENT_IRQL: 2
FAULTING_IP:
iaStorA + 1a20e
fffff880'0167920e 807b44b0 cmp byte ptr [rbx + 44 h], 0B0hCUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: AV
Nom_processus: System
ANALYSIS_VERSION: 6.3.9600.17029 (debuggers (dbg). 140219-1702) amd64fre
DPC_STACK_BASE: FFFFF80221011FB0
TRAP_FRAME: fffff80221011870-(.trap 0xfffff80221011870)
NOTE: The frame trap does contain not all registers.
Some registry values can be set to zero or incorrect.
Rax = fffff880016f1070 rbx = 0000000000000000 rcx = fffffa8010813a10
RDX = fffffa8010813a28 rsi = 0000000000000000 rdi = 0000000000000000
RIP = fffff8800167920e rsp = fffff80221011a00 rbp = 0000000000000000
R8 = fffffa8010813ab8 r9 = 0000000000000021 = 0000000000000000 r10
R11 = 0000000000000002 r12 = 0000000000000000 r13 = 0000000000000000
R14 = 0000000000000000 r15 = 0000000000000000
iopl = 0 nv up ei pl zr po nc
iaStorA + 0x1a20e:
fffff880'0167920e 807b44b0 cmp byte ptr [rbx + 44 h], 0B0h, ds:00000000'00000044 =?
Reset the default scopeLAST_CONTROL_TRANSFER: from fffff80221ce8069 to fffff80221ce8d40
STACK_TEXT:
fffff802 ' 21011728 fffff802' 21ce8069: 00000000' 0000000 a 00000000'00000044 00000000'00000002 00000000'00000000: nt! KeBugCheckEx
fffff802 ' 21011730 fffff802' 21ce68e0: 00000000'00000000 00000000'00000000 fffff802 ' 21011900 fffff802' 21011870: nt! KiBugCheckDispatch + 0 x 69
fffff802 ' 21011870 fffff880' 0167920e: fffffa80'10813 has 10 fffffa80 '0eca0020 fffffa80' 0ec9dbd0 00000000'00000002: nt! KiPageFault + 0 x 260
'21011-00 fffffa80' fffff802 a 10813, 10: fffffa80'0eca0020 fffffa80 '0ec9dbd0 00000000'00000002 fffffa80' a 10813, 10: iaStorA + 0x1a20e
fffff802 '21011-08 fffffa80' 0eca0020: fffffa80 '0ec9dbd0 00000000'00000002 fffffa80' 10813a 10 fffff880'0166588f: 0xfffffa80'10813 has 10
' fffff802 '21011-10 fffffa80' 0ec9dbd0: 00000000 ' fffffa80 00000002 '10813 has 10 fffff880' 0166588f fffffa80 ' 0df47f00: 0xfffffa80'0eca0020
fffff802 '21011 a 18 00000000' 00000002: fffffa80'10813 has 10 fffff880 '0166588f fffffa80' 0df47f00 00000000' 00000000: 0xfffffa80'0ec9dbd0
fffff802 '21011-20 fffffa80' 10813a 10: fffff880'0166588f fffffa80 '0df47f00 00000000 00000000' fffffa80' 0df47f21: 0x2
fffff802 '21011-28 fffff880' 0166588f: fffffa80'0df47f00 00000000 00000000' fffffa80 '0df47f21 fffffa80' a 10813, 10: 0xfffffa80'10813 has 10
fffff802 '21011-30 fffffa80' 0df47f00: 00000000 00000000' fffffa80 '0df47f21 fffffa80' 10813a 10 00000000 00000000': iaStorA + 0x688f
fffff802'21011 has 38 00000000 00000000': fffffa80'0df47f21 fffffa80 '10813a 10 00000000 00000000' fffffa80' 0ec9d798: 0xfffffa80'0df47f00STACK_COMMAND: kb
FOLLOWUP_IP:
iaStorA + 1a20e
fffff880'0167920e 807b44b0 cmp byte ptr [rbx + 44 h], 0B0hSYMBOL_STACK_INDEX: 3
SYMBOL_NAME: iaStorA + 1a20e
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: iaStorA
Nom_image: iaStorA.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 5175919d
FAILURE_BUCKET_ID: AV_iaStorA + 1a20e
BUCKET_ID: AV_iaStorA + 1a20e
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:av_iastora + 1a20e
FAILURE_ID_HASH: {23e6ee3b-e85f-41b3-c240-f78c010c906c}
Follow-up: MachineOwner
--------- -
External monitor from HP ENVY Ultrabook 6-1113tx
Hello
I recently bought a HP ENVY Ultrabook 6-1113tx. I want to plug in an external lcd/led monitor. the problem is that this model of ultrabook does not come with the traditional vga port. are there alternatives apart from buying a new monitor with HDMI input?
Thank you very much
Hello
Purchase new monitor is a better choice or you can buy a CONVERTER (no adapter) HDMI/VGA (digital to analog) which means that you can buy more material and the result's not big.
http://www.Jaycar.com.au/productView.asp?ID=AC1638
Kind regards.
-
Upgrade of RAM HP ENVY Ultrabook 6-1120sq
Here is my ultrabook card: HP ENVY Ultrabook 6-1120sq Product Specifications
Is it ok if I order two of these Rams upgrade? They will be compatible?
Corsair ValueSelect 8GB DDR3 1600MHz CL11 Type: DDR3 SODIMM Capacity: 8 GB Freq: 1600 MHz CAS Latency: 11 ns Standard: PC3-12800
Hello
That sounds good - you can see an upgrade almost identical here to give a comparison.
Kind regards
DP - K
-
iastor.sys - address 828490B 8 physical memory base to @8280B 000, Date Stamp 48054343 - Crash Dump, dump - the disk of 100 I can work only in Mode without failure, but I can't print or scan that I need to do. Someone can help me.
Hello
Looks like you need to update iastor.sys:
iastor.sys = Intel Matrix Storage Manager driver - see System/card mother Maker and manufacturer of chipset.
This driver could perhaps was pushed to the fault by other programs such as Symantec/Norton.This driver is extremely difficult to install if you need system or the manufacturer of the motherboard (for custom
bed systems) help but you could also ask on their forums (if any).Also check the Intel downloads audit AFTER with the system/motherboard manufacturer...
Intel downloads
http://Downloadcenter.Intel.com/Intel Matrix Storage Manager - do not forget to check DATE and set for the version of Windows and chipset
http://Downloadcenter.Intel.com/SearchResult.aspx?lang=eng&keyword=%22matrix+Storage+Manager%22More help on installing iastor.sys here (System Maker/card mother Maker first consult and use that as a last resort).
============================================================
More troubleshooting if necessary:
Pick up the pieces after a computer crash
http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crashCheck this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
for the office or in the Documents folder and download them from there.ZIP or download the content of the C:\Windows\minidump
Use SkyDrive to upload collected files
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65--------------------------------------------------------------------------------------------------------------
Two main causes of this blue screen video drivers and BIOS - check with the system manufacturer
Site for graphics (Video) card and BIOS, then on site of the manufacturer of the device for the last video. It may be
other pilots to check there. Disable the installation of self as those who are older and if
Updates Windows suggests a pilot just HIDE. Antivirus is another possibility.See methods of update driver generic in the next message.
BCCode: 8th 0x0000008E is the same as 0x1000008E
Cause
Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret it, you must identify which exception has been generated.
Common exception codes are:
0 x 80000002: STATUS_DATATYPE_MISALIGNMENT indicates that an unaligned data reference was encountered.
0 x 80000003: STATUS_BREAKPOINT indicates that a breakpoint or ASSERTION was met when no kernel debugger was attached to the system.
0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.
Solve the problem
If you do not have to debug this problem, you must use certain basic troubleshooting techniques:
- Make sure you have enough disk space.
- If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
- Try changing video cards.
- Check with your hardware vendor for updates to the BIOS.
- Disable the BIOS memory options such as implementing caching or shading.
If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.
If you do not know the specific cause of the exception, consider the following:
- Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
- Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.
If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.
If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.
Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.
The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved.chk, which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.
You can solve the problems of BIOS by upgrading the version of the system BIOS
BCCode: 8th 0x0000008E is the same as 0x1000008E<-- read="" this="">-->
* 1151.html? order = date http://www.faultwire.com/solutions-fatal_error/kernel-mode-exception-not-HANDLED-0x0000008E-=============================================
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens. (If necessary)
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
http://www.winvistatips.com/disable-automatic-restart-T84.html-------------------------------------------------------------------------
It comes to my convenience store generic bluescreen:
Here are a few ways to possibly fix the blue screen issue. If you could give the info to blue screen
This would help. Such as ITC and 4 others entered at the bottom left. And another error
information such as the STOP codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during 'blue screen of death '.
http://www.NirSoft.NET/utils/blue_screen_view.html
hangs and displays information about all accidents of a table - freeBlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.You can do without if needed fail or the Vista DVD or recovery command prompt mode
Options if your system was installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
Maybe you are looking for
-
Create a bookmark and popup by clicking on a button (javascript) in a Web page
I'm developing a Web of html page in which I would like to have a link/button to create a shortcut on the desktop of the user and add a bookmark. I tried to create a shortcut/bookmark via javascript, but without success.Application for assistance ple
-
Map Bluetooth PCMCIA (PA3053E) under Win XP
How can I install my Bluetooth PCMCIA (PA3053E) card under Win XP?
-
position of the cursor speed improvement
Hello I have a request where I display data EMG and a video (25 fps), now I want to show a sliders scrolling trough my chart of waveform when I press the play button. I made a business event with time delay 40ms wired to it now when I press play, I c
-
How can I copy map of private to another computer?
How to copy the characters private from one computer to another?
-
Copy / paste between calendar events does not
Hello I do an event in one day, copy the text (right click and context menu use) and when I stick to another event in another day that shows nothing at all.