HP ENVY17 700: Second monitor does not work

Similar Questions

• PP 2015.3 Second monitor does not work and preferences locked

  Just upgraded to 2015.3 and open that I work on the current project. My second monitor has completely stopped playing after years of work. The second monitor shows only the extension of my office. Note that I did not any changes to my machine at the level of the OS x I thought on the upgrade, some preferences might have been reset.

  I went into preferences and that no monitor has been checked for video playback. I moved and my second monitor is TICKING as video playback to solve the problem. When I hit OK, nothing happens. The preferences windows remains open. It is never closed. It's as if the program refuses to accept all the changes I want to make. The only way to exit preferences window is to hit Cancel who reverts my changes.

  Any help is appreciated.

  Just found the solution to your preferences is not not qualify: it is possible that your user account is not authorized to change the Preferences folder. (No idea how this occurs, mine was going well until I updated to CC2015.3)

  Follow the steps under the '' alternative Solution '' to this link and see if it works.

  Adobe first Pro CC, Adobe Media Encoder CC, CC prelude Adobe crash | Mac OS

• Primary monitor does not work after last nights updated

  • I'm running Ultimate.
  • I have two monitors.
  • My primary monitor does not work.
  • I checked the VGA cables. This isn't the issue.
  • Edit: Just realized that my main monitor is a monitor "Westinghouse". -Who is a "Plug-in-and-play" monitor, there are no drivers.
  • Reinstalled the ATI drivers, did nothing.
  • SYSTEM RESTORED, still nothing.

  I ran the most recent update for final last night, then fell asleep. Everything worked before that date, but when I went to turn on my computer this morning, only my HP [my second monitor.] w17e worked. He said he was installing updates from last night, so I had no problem with him and thought it might show something once like this on the login screen.

  Once that has happened to the login screen, it showed it for a fraction of a second before disappearing. I entered my password and it connected as usual. After login, I turned off my monitor, and then back on, and it showed my normal desktop for a moment, [enough for me to close two-three programs] before she returned empty.

  Hello
   
  I recommend you to update the graphics drivers and see if it makes a difference. You must be logged on as administrator to perform these steps.
   
  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. in Device Manager, locate the graphics card and then double-click the device name.
  3. click Driver tab, then click on set to update driver and follow the instructions.

  Now, try to follow the link provided to update a hardware driver that is not working properly and check the question below.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I also suggest that you please check how to set up two monitors and frequently asked questions on how to set up multiple monitors in Windows 7 from Microsoft mentioned below, items

  ·    Setting up dual monitor is easy in Windows 7 http://support.microsoft.com/kb/976064
   
  ·    Multiple monitors: frequently asked questions http://windows.microsoft.com/en-US/windows-vista/Multiple-monitors-frequently-asked-questions
   
   
  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Powers of laptop on but the screen (monitor) does not work.

  I have a HP compaq laptop 6720 (vista home basic, 1 GB of ram, intelcore,...)

  Powers of laptop on and all lights are working, but monitor does not work.
  Nothing on the screen, looks like no electricity on the screen or any contact of motherboard.
  Need your help,

  Kind regards.

  Hello

  If you don't see anything on the screen when you start, and this includes see the HP Logo, it would seem that it's a hardware problem.

  Contact HP Service or a good repair shop.

  See you soon.

• Reliability Monitor does not work in Win7 Ultimate

  Can someone shed light on why the reliability monitor does not work in Windows 7 Ultimate? Apparently, it has not operated since I installed the operating system on a dual boot w/Vista system as nothing recorded, nor any indication that current operations record is!
  I don't remember having a problem with the tools of Perf and Rel in Vista and performance monitor seems to work in Win7?
  I already read the thread on this issue which was published in January 2009.
  Any suggestions welcome!
  Thank you

  Hi dw_witless,

  Thanks for posting on Microsoft Answers!

  I suspect that data collection is not enabled. To follow the steps below to enable it:
  1 activate the data collection for reliability monitor
  Reliability Monitor uses data provided by the RACAgent scheduled task. Reliability Monitor will begin showing an indication of stability, and event information specific 24 hours after installation of the system.
  The RACAgent scheduled task runs by default once the operating system is installed. If it is disabled, it must be enabled manually in the software component for Microsoft Management Console (MMC) snap-in Task Scheduler.
  Membership in the local Administrators group or equivalent is the minimum required to complete this procedure.
  To enable the RACAgent scheduled task
  1. Click Start, click in the search box, type taskschd.msc, and then press ENTER.
  2. in the navigation pane, expand Task Scheduler Library, expand Microsoft, expand Windows, and click RAC.
  3 right-click RAC, click view, and click Show hidden tasks.
  4. click on RACAgent in the results pane.
  noteNote
  The RACAgent task name is maybe not completely visible. If you don't find it, expand the name column in the results pane.
  5. in the Action menu, click Activate.

  If the steps above does not
  2 reset the reliability monitor:
  1. turn off your Windows 7 problem report history.
  NOTE: You need to do step 6 at this link above to delete all the problems.
  2. If the Reliablity monitor is open, close it.
  3. open the Folder Options and select (dot) the hidden files and folders option, and click OK.
  4. open Windows Explorer and navigate to C:\ProgramData\Microsoft\RAC.
  5. to save the history of reliability data-
  WARNING: This is an optional step, you will not be able to restore these data if you do not back up this data and it will be gone for good. If you want to ignore this, go to step 6 instead.
  (A) copy the PublishedData and the StateData files and paste them to another backup location.
  6 open the folder PublishedData.
  7. Select all files in the folder and click on delete.
  8. click on Yes to approve it.
  9 open the StateData.
  10. Select all files in the folder and click on Delete
  11. click on Yes to approve it.
  12. If prompted by UAC, then you will need to click Yes to each UAC prompt for each file in the folder StateData approve deleting each file one by one.
  13. close Windows Explorer.
  14 emptying the trash.
  15 open the Options folder and select (dot) the do not show hidden files and folders option and then click OK.
  16 open the Reliablity monitor to see it reset now own.
  NOTE: If Reliablity monitor is already open, close and reopen.

  For additional help, you can also check out the article below which explains more on reliability monitor:
  http://TechNet.Microsoft.com/en-us/library/dd744567%28WS.10%29.aspx

  It will be useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Monitor does not work after installing Windows 7.

  I have a Dell laptop with a Dell S1709W Flat Panel screen.  After replacing the Windows Vista came with the laptop for Windows 7, the monitor does not work.  The monitor said that he does not any signal from the computer.  The computer does not show that it has detected the monitor.  The monitor's cable and the connections are good.  What should I do to get the monitor to work?

  You have a graphic external connector for a secondary monitor, if yes attach it and then go to the Dell support web site and download Windows 7 drivers for your laptop model. Install the driver chipset first, then the driver graphics/video, network/LAN and drivers of the potential.

  If you do not have an external graphics connector, call Dell Tech support. They have a method to recover your system without losing data or applications.

  JS
  http://www.PAGESTART.com
  Never be afraid to ask. This forum has some of the best people in the world to help.

• Product name: 700-010xt: HDMI does not work after upgrade to Windows 10 - product name: 700-010xt

  I upgraded my desktop HP ENVY 700 to Windows 10 computer and HDMI I used for the second monitor no longer works.

  It worked when I had windows 8.1.

  It has the graphic card NVIDIA Geforce GT 640 (as displayed in the list of devices)

  I tried HP Recovery Tool to restore the original driver, but it didn't work. Second monitor is not detected.

  Any HELP is greatly appreciated.

  Thanks in advance

  Product name: 700-010xt

  Hello

  Try this driver and see if that helps

  http://www.GeForce.com/drivers/results/96883

• Why is my second screen does not work - it starts with my main screen, but then turns off.

  My HP Pavilion P7-1120 Desktop PC does not work with two screens - there 8gig of ram...  1.5 terabyt hard drive, Windows 7 64-bit primary system works via the VGA port, but the second screen does not rest via the DVI port.  The two normal startup with the start-up of information on both screens, then the secondary display stops and I get a message "no signal".  Both monitors worked with my laptop PC and older myDell...

  When I go into the control panel and the view tab - the PC does not recognize the second monitor.

  GEO...

  It's not a problem with my PC or whatever it is in the box.  Cables work on other screens of the RGA and DVI.  There is a problem with my screen - the works of port RGA, is not the DVI port.  Another monitor works properly by the DVI.

  Now fixed.

  TKS for the entry.

  GEO...

• DMA2200 on PC-monitor does not work?

  Hello

  Well I have except the fact that the DMA2200 support not the VOB files, that the dvd drive is not region free and I had to reverse the mistakes of codes avi using the FourCC change codec, I'm surprised that I'm not able to see anything on a standard PC monitor.

  At first, I plugged the Componet video output (Y, Pb, Pr) of my DMA2200 directly on the vga input of the monitor (Dell 1900FP) with a cable special nine, but I saw just nothing more than a black screen. I changed the monitor for a LG Flatron L222WS monitor told me that the frequency was out of reach... Certain signals does not cross?

  But as the DMA2200 has a HDMI output that welland the Dell1900FP supports DVI - D Dual Link entry too, I. The 1900FP has a resolution of 1280 x 1024 and it can be run up to 75 Hz, 60 Hz it's native refresh rate. So, I went back to the store and bought a HDMI<->DIV - D Single Link cable.

  Only one? Yes, why not!

  DVI dual link as its name suggests has drivers more than the single link DVI for signal transmission. Single link DVI supports a maximum bandwidth of 165 MHz (1920 x 1080 at 60 Hz, 1280 x 1024 at 85 Hz) and use 12 of the 24 pins available. Dual link DVI uses all 24 pins available and supports a maximum bandwidth 2 x 165 MHz (2048 x 1536 at 60 Hz, 1920 x 1080 at 85 Hz).

  So, I plugged the HDMI<->DVI - D on the DMA2200, the Dell1900FP monitor and the monitor directly on channel 2: digital input. But... a black screen again. As I left the monitor rescanning the entrance, he tells me "Please press any key of the mouse button. It seems that the monitor sees a digital signal, but expected more... hmm... what to do?

  I tried to use NTSC (instead of our PAL) on the DMA2200 menu as the frequency changes, but it does not work. I also used all of the selections of entry on the DMA2200-menu (like composite-sd and hd). Normally, the HDMI options is grayed out and uses the default Auto option; but in composite-hd, my old TV mode (connected by SCART) turns black, but can still use the menu on the screen before the DMA and am able to change the HDMI settings, like 480 720 (if I remember correctly) and 1080 p (progressive format) and 1080i (interlaced). I hoped a solution here, but maybe it's just not my day.

  Then.

  Y at - there anyone out there that can help me to get a picture on the monitor? Whether vga or dvi - d... Please...

  Your Dell LCD and DMA2200 not being able to understand/sync between them with a direct DVI connection you could try to put a device inbetween them so that your Setup program can work. Try this device, basically, you connect the DMA2200 using RCA cables to the KWorld device and this KWorld device is then connected to your Dell LCD screen.

  See you soon.

• Monitor does not work after restoring update

  Hello. I have a problem with my PC. My CPU is on but the monitor shows No Signal box. Previously, this problem seems too. But I fixed that by cleaning the RAM access (or other) Point. But this time, this method did not work. I have clear the CMOS, but the problem still not fixed. Oh yes, this problem occurs after the update. When updating, the update has failed and come back. When I start the PC again, nothing is displayed and there is no sound signal. Help me please. My characteristics are processor i3 Intel, ATI Radeon HD 5550 2 GB, DDR3 RAM 2 x 2, Windows 8 Pro 64 Bit.

  Hi Chloe,.

  Thank you for the update.

  I understand that since the DVD burner does not work, you are not able to create installation media.

  Put a USB installation media option. You can use both links to download and create below

  Update Windows with only a product key

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-product-key-only

  Here are the steps:

  1. download and open the Setup file install Windows 8 Microsoft from the link above.
  2. Enter your product key of Windows 8 and start the download.
  3. once the download is complete, select install by creating media.
  4. Select the USB flash drive (it should be the default choice) and insert the USB key.
  5. accept all prompts to clear the contents of the USB key in order to start the process.

  

  

  

  

  

  Let us know if that helps. Keep us informed so that we can help you further if necessary.

• My second monitor does not display anything

  My computer worked fine and both of my monitors worked until recently when my second monitor stopped show all. My computer is always picking up as connected and on but the screen is black and no backlight, my monitor is not working is a hp w1907 and light on the upper part is the color it is on and not asleep. When I turn off my monitor and turn it back on it displays for the new school year second but then just a few no display. And before that I did my second monitor was my main monitor and it worked fine. I tried to make sure that the plugs are connected and tight and that everything was normal with the pilots and the son and everything worked. I have a Sapphire hd graphics card 7970 and plugs all work. Please help me solve this problem.

  Sincerely, McKane

  I tried the monitor in the other port and it still doesn't work so I decided that my monitor is dead and I cand do anything to fix it

  Then, almost certainly, the problem is that the monitor is dead. Especially if it used to work, it is unlikely that ther'e a driver problem.

  You might want to try the monitor to a friend's computer to verify that it is their work.

• Monitor does not work after windows update failed

  After the recent updates on my computer Vista installation seemed stuck to update 2. I pressed the off button and he turned his back and now my monitor does not display anything, he spends just the analog to the digital looking for a signal. I tried the computer to another monitor with different tracks and it's the same thing. Can anyone help?

  Starting in recovery system (from the Vista DVD) options and do a startup repair.

  Startup Repair is a Windows Recovery tool that can fix certain system problems that might be preventing Windows to start. Startup Repair scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  Startup Repair is a recovery tools in the System Recovery Options menu. This set of tools is on your computer's hard disk and on the Windows installation disc.

  Reference: http://windows.microsoft.com/en-us/windows7/Startup-Repair-frequently-asked-questions

  If the startup repair does not resolve the problem, try other system recovery options:

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7 Man is the only animal that laughs and cries; because it is the only animal that is struck by the difference between what things are and what they could be.

• My Acer Iconia W/700 external keyboard does not work. My bluetooth seems ok.

  My external keyboard does not work. I can't type on the screen and my bluetooth seems ok.

  Here is the link with the steps to connect your Bluetooth keyboard

  http://Acer.custhelp.com/app/answers/detail/A_ID/27798/kW/W700

• Satellite L50 - A - 14 M - Toshiba pc health monitor does not work

  Hello!

  I am new to this forum and I have a problem with my new toshiba satellite l50a - 14 m. I did a factory reset recently and the integrity monitor (whitch is an excellent program in my opinion) no longer works...

  When I opened it notify an error "Could not get the flag to enable sorts in the registry" and does not turn on.
  I have 8.1 64-bit windows;

  I tried to download versions more but do not work.
  How to do?

  Sorry for my bad English...

  TSRI means the Intel Rapid Storage Technology, and there is also a TSRI driver available on the Toshiba UE driver page.

  You need to update or reinstall the driver.

  I think this will fix the problem of pc health monitor

• External monitor does not work on Vista of Tecra M7

  My external LCD monitor connected with analog cable doesn't work on my Tecra M7 with Win Vista and latest driver downloaded today on this site to display. Display of Windows Mobility center see the trendy, office is extended to the second screen and Windows display settings dialog box shows the correct resolution of the external LCD. But there is no image on an external monitor (with the 'no signal' message just after turn on the monitor).

  Any changes to the display (resolution, type of display (mirror, second screen, primary/secondary)) the settings do not work.
  Monitor works fine with my old laptop and Windows XP.
  If I restart my computer M7 laptop with connected external display I see loading messages and windows on external monitor logo and after that I see only painted while internal lcd to my laptop is black and I can't move at all internal lcd in this case (only restarting with external display disconnected works in this case).

  Hello

  Did assign the external monitor as the main screen in the graphics properties?
  I think you did this due to the fact that the Toshiba splash screen appears on the external monitor.

  But just moment please. The Tecra M7 was delivered with Win XP Pro tablet edition and not Vista.
  Have you installed it you own hand?

  I guess that everything worked running Win XP
  Maybe you should try to remove the graphics driver Vista system and use one from the 3rd site like www.laptopvideo2go.com