HP 5510 do not put ink to paper.
I have an HP5510 printer. It goes through all the steps of printing, but does not ink on paper. I am running Vista home edition. I can copy the printer turned off or shut down the computer and the same thing happens. Why?
Did you remove the Strip contacts?
Tags: HP Printers
HI - try following the steps described inthis document, which includes a test page printing. If the test page has printed nothing on it, you will know that it is a nuisance material - printer or ink. In any case, the document should guide you through the steps to solve.
Hope that helps.
HP Deskjet F2480 works very well for more than a year. without any changes to the computer or printer, he simply stopped putting ink on paper, but all other printing features seems to work very well. Put in the new print cartridge, without change. Replaced by the old printer exactly the same that I had used before, with the same cartridge new and even tried a second cartridge, same problem. Delected all the printer setup, then reinstalled, without change. Makes cleaning of the computer, defragmentation, malware check, everything and of course restarted several times. Yet once, deleted all the configuration of the printer and completely reinstalled from scratch. Return the most recent printer with new print cartridges try several different, still nothing. Cannot print an alignment page, just came out in white, except for a small red triangle. Tried to test pages, nothing. It sends the print job in the queue and returns to the printer, the printer feeds the paper and attepts to print, but nothing's going on the page. Envoy of printing from a laptop computer in a network and the same problem. double checked all cables. I am at a loss what to try next. It doesn't seem to be the material of the printer cartridges of ink, no drivers or software, no cable.
I am betting that the contacts on the cartridge are not completely in contact with the cartridges or cartridges must be sent through the cleaning process. Following the link are two documents that should help you. The first document contains the steps to clean the contacts on the cartridge and the printer. The second contains the steps for the cartridge to be cleaned mechanically and fix the printing problem. If none of this solves the problem and you have already tried a different cartridge, you need to replace the printer.
"Print the cartridge failed", "Cartridge problem" or "Incompatible cartridge" Message is displayed on the computer:
Troubleshooting print quality problems:
Printer acts like it is printing but is not put on paper ink. Printer recognizes the new HP 564 black ink cartridge is installed. Tried an another new ink cartridge. Printer worked correctly in the past. She continued print correctly printed a few lines verical to absolutely nothing. Printer does not provide error messages and seems to believe that it works correctly. Any suggestuins? Thank you dave
The print head is probably clogged.
Is that the warranty is in force on the 5510?
I replaced the cartridge, made sure that the cartridge was evacuated, but could not find the control panel how to clean the print head. I followed the instructions carefully, but my computer laptop gateway has not called to configuration tools.
Welcome to the HP Forums!
I understand that your Photosmart 5510 print no black ink. I will do my best to help you! You can "Clean printhead" on the control panel of your printer:
- Make sure that this ordinary letter of white American or A4-size paper is loaded in the tray.
- From the Control Panel Home screen, press the right arrow key ( ), then tap the Setup icon ( ).
- Tap Tools , and then tap print head cleaning . The printer cleans the print head and then prints a test page.
Also, follow this HP document on fixing of the streaks of ink faded prints and other common Print quality problems Please post your results, I will be looking forward to hear from your part have a good night!
The bleeding of printer ink on paper. How can I solve this problem?
This looks like a problem with your printer, not Microsoft Windows. Try the following:
-Remove the ink cartridge and check it for damage. Replace if necessary.
-Try to use a new cartridge; the contacts on the old can be damaged.
-Maybe your paper is too thin or absorbent. Try a different paper brand.
-If no other solution doesn't work, the problem is probably the printer itself. You may need to replace it. (You don't need to do unless nothing else works)
If this is your answer, click on "Mark as answer" below. If it's useful, click on "Mark as useful" on the left.
Hi, I had a HP f4480 printer all-in-one my father bought home and downloaded the drivers etc, but it won't be ink on paper, print test page for the habit and keeps telling me that he used to align. The machine goes through all the motions and for all brands worldwide noise similar to printing, but paper comes out blank... Please someone help me, I've been here for three and a half hours to try and im ready to throw it out the window... Laughing out loud
See you soon
Please follow the steps in this document:
I hope you find it useful.
* I am not an employee of HP, my work is voluntary.
If this answer was helpful and clarify or solve your problem, please mark the topic as resolved and click on my next star to indicate a kudo, thank you.
When I send a new email, the button send is not put in evidence and you can't tap to send mail, what is wrong
When you open a new message of Scripture, the 'Send' button should be moderate or look like it's grayed out and you can not click on it.
It will not appear as usable until you enter the addresses in the TO field, because without knowing where to send to, it cannot send.
Therefore, confirm that you have indeed added to/Cc/BCC email addresses.
So, why is it auto activated when you click on for example: answer?
Because TO fields are auto-completed.
I installed JZip and now I can not put my homepage of everything except the jzip search page. How to disable the functionality of jzip?
To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
If you see a warning then you can confirm that you want to access this page.
HP Officejet Pro 8600 more
Windows XP Pro, Windows 7 Pro
Error message: paper detected does not match format of paper or type selected
This error message appears on the printer display panel any time a custom paper size has been set up in Word (or any other application) and the format of paper & type was inserted in the Officejet Pro 8600 paper tray. This error is generated by the printer regardless the orietation or margins or paper size settings in the document to match the paper size in the paper tray. When you press 'OK' on the printer display panel, the printer ejects paper correctly. Because this printer lacks a manual bypass tray, the custom paper is always inserted in the Tray1 and is the only book in this tray 1. It's a simple tray 8600 more.
What I am doing wrong?
Your help is greatly appreciated.
Unfortunately, you cannot print on a paper size "undefined" with printers. While the functionality is available in word, our printers do not recognize that the sizes of the main paper (these changes according to the country sometimes).
The reason for this is because undefined paper sizes open the printer and the print job to a certain number of risks, including jams paper or misaligned printing. This is why the function is no more on HP printers.
I recommend to find a type of traditional paper which is close to the size you want to print on and select in the layout of the print job as a workaround for this problem.
I hope this helps!
I have several networks appear on my network card that I did not put there.
If they are wireless networks, you can simply pick up your neighbors with powerful transmitters router broadcasts and they do not mean that they have access to your system, but rather that you could theoretically have access to them if they are not correctly fixed.
It would help greatly to be able to see what you see.
Can you open the network map and take a screenshot and post on your SkyDrive with all access and then post a link here so we can see what you're talking about? Here's help on how to do it: http://answers.microsoft.com/en-us/feedback/forum/feedback_other-na/how-to-insert-images-in-ms-answers/94a5cb36-a21f-4a6a-b266-611cf6c910c8.
Thanks and good luck!
I had to completely restore my computer with a F10 restore now it wont let me not put my software on without XP Service Pack 2 when I try to load SP2 it says that there is an error__ of cryptographic
I had to completely restore my computer with a F10 restore now it wont let me not put my software on without XP Service Pack 2 when I try to load SP2 it says that there is a cryptographic error
Cleaning a compromised system
Follow the instructions in this post of mine in another forum (to-the-letter & in order!) to restore your computer to a State course: http://aumha.net/viewtopic.php?f=62&t=44636
If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/xprepair/threads
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
XP... The desktop icons will not put. I did a lot of research on this issue, read the different responses on many forums, including and have tried much of the recommendations... I'm not familiar with the functions of establishment of the arrangement of the desktop icon and this is the first time I met this kind of problem. "Lock Web items on desktop" is checked, "Snap to grid" is not checked (my preference, but I find that it will check mysteriously itself after the icons rearrange themselves to the left of the screen, apparently by making use of automatic reorganization, even if it is not checked), I tried securityguy14 registry change response dated December 7, 2009 , have installed and use the program "Icon restore" that changes the Recycle Bin, my computer, and another icon of office, I do not remember to add a backup/restore function for the setting icon on the desktop... is what bought me a brief period of mental health before they rearrange themselves after a few constantly unidentifable strike entered sometimes without "rhyme or reason", not unique to anything, preventing me from shrink down to a specific cause. I conducted several audits of malware with paid and free programs and there is no indication of anything invading my system, it works fine other wise. Help!
You can perform an upgrade in-place of Windows XP:
How to perform an upgrade on the spot (reinstallation) of Windows XP
Run a repair installation will not damage files and applications that are currently installed on your computer. However, I suggest you to back up all important data on the computer before you perform the upgrade on the spot.
I deleted the SMART virus, but I can't access my desktop. I have no icons and can not put everything on it.HelloTo view your files and your icons, download Unhide. Once downloaded, double-click display and let it run. It removes the attribute hidden on all files and try to restore the items on the start menu to their proper location.I hope this helps you.Brian
Can not put Windows Media says Server unavailable player security?
You can download Windows Media Play Security Upgrade from the following link.
The security component upgrade
Maybe you are looking for
I get this massage the iPhone could not be restored an unknown error occurred (3014)
I read the upgrade of RAM is available for this laptop, even if it has no plate rear common access to may other portable. I guess the entire back must be removed. Anyone else done this and been able to point me in the right direction. Thank you Dave
When I'm in the folder 'My music' and select the files to burn, the system keeps jumping to the beginning or the first list of files in the folder and I then have to manually scroll to where I was. How can I disable this extremely annoying?
I have my old version of detail I want to get back on my old computer, but can only read the first half of the product key. What are my options?
Hello I can't speak English very well if I have a problem I apologize. In my last question have problem to access my USB key, I can't fix it. For this, I download Win7 (V 6.1 build 7601). After installation, I use only my hard external (it's working)