HP G60-535DX laptop: Hp g60 screen flashing

My screen was flashing as if it was the taskbar for the most... it flashes real quick... I also had this problem before and then my hard drive died... now I come again... want to know is it because my laptop is heat or my hard drive has a failure or graph...!

Hi @Fakhiha,

Welcome to the HP Forums!

It's a great place to find answers and suggestions!

You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

Learn how to post and more

I understand that your display screen flashes especially along the lower part of the screen.  You've had this problem once before and the hard drive needs to be replaced.   You wonder if it could be an overheating problem, your hard drive or graphics.

If you connect an external display you see the blinking even?

Here are links to help dismiss the screen as the question.

HP Notebook PC - troubleshooting a LCD screen for laptop issue (Windows 8/8.1, 7)

HP and Compaq Flat Panel Displays - display quality problems

Here are links to help a testing hardware failures and overheating.

HP Notebook PC - reduce the heat inside the PC to avoid overheating

HP Notebook PC - detection of hardware failures (Windows 7, Vista)

If you determine the cause and a replacement part is necessary and are considering making a repair yourself, I included a link to Compaq Presario CQ60 Notebook PC HP G60 Notebook PC Maintenance and Service of Guide.

To say thank you for the reply, please click on the thumbs upwards the button below.

If this resolved your difficulty to say please to people choosing the solution provided.

Good luck!

Tags: Notebooks

Similar Questions

  • My keboard is weird .the screen flashes keystroke and there is only a single action on the keys

    It's a laptop and the screen flashes white on each keystrore ihere is a squeek in keyboard noise strikes the keyboard and keys only affect the one unique touch. Act as thoughj River is incorrect

    Hi MichaelGabriel,
     
    -What is the brand and model of your laptop?
    -A your keyboard without any problems before work?
     
    Check if there is an updated driver for the keyboard to your laptop from the manufacturer's website and install the same.
     

    More information about the update of the drivers are available at:

    How to manage devices in Windows XP

  • My laptop computer screen flashes a few times (very rarely) and after some time screen goes white

    I use compaq V6000 computer laptop with windows xp. My laptop computer screen flashes a few times (very rarely) and after some time screen goes white, I hear only audio. After the reboot, it works normally for hours. I used to know the reason for this and the solution.

    Hello

    1 how long have you been faced with this problem?
    2. don't you make changes on the computer before this problem?

    Read the following article that may help you resolve this problem.

    Resources for troubleshooting problems in Windows XP
    http://support.Microsoft.com/kb/307960
    Glitter wallpaper
    http://support.Microsoft.com/kb/555373

  • My screen flashes and flashing light wireless is gone (laptop)

    Product name: HP Pavilion dv5-1040ep Notebook PC (FM577EA)

    Operating system installed: Windows Vista Edition Home Premium

    Error message: None

    All changes to your system until the problem was happening: None

     

    Description of the problem:


    I could not find in HP Support Assistant help some. My screen flashes while I open and move it. Sometimes, it must be almost closed to be visible. It can't Hibernate or restarts, flashing just with movement.

    Partners or not, the blue light that indicates wireless, missing/is gone, but I have wireless, just the light disappeared.

    There is no error message, just that two things that appeared in the material.

    Someone happened to that? How do solve you? What are the parts must be corrected or modified?

    Happy to help you.

    But sad for the question.

    Yes, that means lcd cable needs to be replaced. It s is not easy to do, so I advise you don t feel comfortable to open the unit to go to a repair center.

    This components are very sensitive and can be damaged easily.

    You can use this part number for the lcd to buy a new one, a 484367-001 is not much more expensive and is not an expensive repair.

    On the need for basic wlan led to replace the switch cover and the part number of this one is very cheap in 488316-001 it s too.

    You can easily find these parts on the web.

    Doubts, questions or how to replace these parts just tell if I can advise and help you.

    Best regards

  • Satellite M300 - screen flashes white

    Toshiba Satellite M300 on 18 months old (using Windows 7). Display has had intermittent problems. Screen flashes to a white screen. Now if the lid is moved while he was working, "white" screen completely and returns to normal when returned to 'the sweet spot '!

    Have not yet tried another monitor. Driver is up-to-date. Assuming that maybe it's a "bad connection". Use turned off with the closure of the lid that changed tonight.

    Any ideas? :)

    Hi KezRev,

    Theoretically, it could be a problem of connecting cable or internal problem display but you should test another monitor first. Just connect an external monitor to check the image here.

    If the external monitor works properly it s the LCD cable internal or visualize a malfunction. So, contact a service provider and allow technicians to check your laptop. They can fix this problem and order new parts. :)

  • Screen flashing on Satellite U series

    Hello

    I have a Toshiba laptop with a weird problem.
    The screen flashes if I remove the battery, it stops.

    I put a new battery but same problem.

    Can help?

    What devices you have connected to the laptop? External monitor? USB devices?

    There may be a ground loop or something.

  • 10 update, the screen flashes.

    Update Windows 7 10, (last night). My laptop screen keeps flashing and I can't use the computer at all. How can I uninstall Windows 10 & back to 7?

    I suggest you only start Win10 in safe mode. Because you screen flashes the only way to do so is in the password screen. When you're at the password screen, click the power options in the lower right. Hold down the SHIFT key and select restart. This will get you to the troubleshooting page. Once you're in safe mode, you can return to Win7. I suggest you google "Win10 starting in safe mode" and "return to Win7 from Win10. It should provide you with screenshots. I hope this helps.

  • Screen flashing after migration to Windows 10

    Hello
    The screen flashes and I can't do any action except (CTRL + ALT + DELETE) just after the migration of Windows 10 on my laptop Satellite L855 17V.
    Help, please.

    Kind regards.

    Laurent

    Hi Laurent

    Did you get all the answers. I am new to this and have just turned on my Toshiba Satellite C55 still work on windows 8.1 and the screen goes ballistic. After that signature in the display starts to Flash and the only thing I can do is CTRL + ALT + DELETE. I wonder if its something to do with 25 downloads of Microsoft?
    If anyone can help please notify

  • Red screen flashing interminnietly

    Sometimes red flashes inremittedly times at random, it usually fixes around tons of use later. NOPE.

    Image:

    Hello @Tenno,

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

    I understand that you have a problem with the display and wanted to help you!

    For starters, can you provide me with the product number and the operating system of your laptop?  You can use the links below to help you with this information:
    How can I find my model number or product number?
    Operating system Windows am I running?

    In the meantime, can you provide me with a little more information about the issue you have with the display?  The screen flashes red, only when playing games?  Or it will happen during any program?  Forward to your response.

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Have a great day!

  • Screen flashing in Satellite L500D

    Welcome!

    I have a laptop Toshiba L500D. For about two weeks, something is happening with my laptop. Laptop is turned on and when I open the lid, or closed, the screen flashes, change colors, you can see the different bands in black and white or in color, usually the screen is distorted.

    This happens when the cover is at an angle from 0 to 90 degrees, when there is more than 90 degrees, then it is not the case.

    Probably something not going under the screen of the laptop on the hinges. Only way out is a service?

    It is a film in which this problem is presented.
    http://www.YouTube.com/watch?v=LyxhfiZtKak

    Please answer

    Hello

    Yes, I agree with you that there may be a problem with the connection.
    But it of not possible to say exactly what's wrong.
    It may be something wrong with the sensor that turns the backlight on and off, or maybe something wrong with one cable

    There is no other choice for that pick up if the guarantee is available (it should be valid 2 years long if the laptop has been saved) then should be set the laptop for free.

    Good luck

  • Equium A60: display screen flashes constantly

    My A60 is not so old and after 20 minutes after ignition, the screen flashes constantly for about 10 minutes then stops then starts again. I thought that maybe it's something to do with the computer over heating, but its not even hot and the fan is not blocked. Any Suggestions? Also seems to take ten minutes to load up, which seems to long for a 2.8 GHz machine or is this normal?

    Any help would be appreciated

    Hi aleeg81, it sounds like the power of the backlight may be suffering from malfunction any or there is a loose video connection. Have you tried to adjust the options and the brightness of the screen to see if it improves things to save energy? If the problem persists and your laptop is under warranty, I would recommend send to Toshiba for investigation. Twinkle is not normal and should not be tolerated if your laptop runs hot or not. Windows should not take 10 minutes to load or perhaps you need to remove and change a few things to improve this, see: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=8355
    For more information :)

    Richard S.

  • Why do Satellite A100 screen flashes when turned off?

    Hello
    I have a toshiba A100, Go 7600 Gpu, just bought there is two weeks and im very pleased with the quality and performance far :), just noticed one thing today, the room was turned off and the laptop turns off with the screen in open position, I leave it open normally when at home, I noticed that the screen flashes as fixed every 1 min in what appears to be an interval of time with or without AC connected, not a flash very bright but not easy to notice, but I'm sure the flash, so my question is should I worry about this? Thanks in advance :)

    Hello

    What do you mean with the screen? The LCD internal? Maybe you didn t stop the machine itself.

    I also suggest you update your bios and your drivers, maybe it s just a software related issue...

    Here´s a link to find the bios and latest drivers for your computer:
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

    Give some information about this case, could be interesting, what problem is.

    See you soon

  • Pavilion g6: the screen flashes but will not stay

    When you press the power button the laptop starts to power. A message "press the esc key to access the boot menu" flashes briefly on the screen, but the it turns off and remains empty. The laptop is continuing with its power in sequence and the screen flashes briefly from time to time showing what seems to be the boot sequence screens, but nothing remains on the screen long enough to see what is displayed. Then, the screen remains blank.

    Hi there @NickRDavis,

    By reading your post, I gathered that you see a black screen on your laptop HP Pavilion G6.

    Before I provide documentation of troubleshooting, I would like to take a moment to welcome you to the HP Support community, where you can ask questions, find solutions and help others! To show your appreciation, please click the "Thumbs up" on this post.

    Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems. So please try and connect an external monitor or TV to your laptop to see if the screen displays correctly there.

    Have you connected the laptop to an external monitor or TV? Please try this step first to see if the display on the external monitor or TV is black too.

    Have you tried running in Safe Mode?

    Did you do a BIOS update?

    Have you tried tests to hardware failures?

    You have the phone broken?

    What you sit your Notebook on when using it?

    Did you do the updates using updates of Windows or HP Support Assistant?

    Have you tried to clean up all the vents in Notepad?

    Have you tried to do a hard reset?

    Have you received any error messages?

    You have beep codes or flashing LEDs?

    Did you do a BIOS reset?

    There is a document that has the reset steps, connecting steps an external monitor, BIOS reset steps and Reseating the Module memory he intervenes. The document is called black screen troubleshooting with no. Error Messages at startup or start-up. Here is a document for you have called the computer does not (Windows 7).

    Here are a few other documents for you that can help:

    If you manage to get the laptop lights using the troubleshooting links in the previous questions, please try a Test hardware. HP provides the diagnostic software that you can use to test the hardware components on your computer. to disprove or confirm the hardware failures when something is wrong.

    Thank you for your participation in the Forums of HP where we want to help you as well as others who may encounter a similar problem that you have. Please consider tagging the post in order to resolve your problem as "Accept as Solution" to help other members of the community!

    If you need assistance, I would be more than happy to continue to help. When you repost, please provide me with the detailed results of the above troubleshooting and your model number (How can I find my model number or product number?).

    I hope this helps!

  • want to m6 sleekbook: screen flashing after windows update

    After the update windows 8.1 and later to win 10 screen flashes all the time between desktop screen and blue, already install all updates of HP with the intell and Windows safe mode - the same situation, all reinstalled video drivers by myself, but still no result,

    is it possible to solve this problem without getting windows to the previous version? or reinstall the entire system is the only solution?

    Hi @nazik_UA ,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! I looked in your question on your HP ENVY m6 Sleekbook and issues with a screen flashing after an update.

    Here is a link to put the laptop in Safe Mode. This occurs in safe mode?

    You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows 10.  Please restart the laptop twice to make sure that all updates are completed!

    Here is a document that shows how update the drivers that do not work correctly with Windows 10.

    If this did not help, you need to reinstall the operating system.

    I hope this helps.

    Thank you.

  • HP Pavilion DV4-2101TU: DV4-2101TU screen flashing

    Hello! I have a problem with the screen flashing. I changed two times of the display cable, the laptop works very well for a few days, but then the problem comes back. If I press at times, at the bottom of the screen, it works very well, at the time when that pressure is removed, it starts flashing again. Is the LCD, problem LCD inverter problem or the cable from the screen once more? And if it is the display cable again which is damaging it again and again?

    If someone can point to the problem? Any help would be appreciated.

    Thanks in advance.

    The symptoms are exactly what you posted.

    If the connectors are not properly "COZY" mounted, it can be pulling slightly, which is enough for casue you feel.

    When you change the cable yourself, you must ensure that the mylar or tape covers the connections to FIX in order to reduce the movement, if not even once, it appears you are experiencing the symptoms. If you checked these, this could be the inverteer on the back of the lcd screen.

    But I think you should check your connections as you mentioned that it works for a few days.  The person who did the work may have set no new band/Ribbon mylar for connections to hold it still.

    I am an employee of HP, but the answers are mine and are not HP in no way, nature or form.

Maybe you are looking for

  • How can I configure my gmail to work on firefox

    The page is not redirecting properly Firefox has detected that the server redirects the request for this address in a way that will never end. This problem can sometimes be caused by disabling or refusing to accept cookies. I have cookies enabled. Bu

  • I want to delete an inactive Apple account

    I have an I phone and a laptop asking yet old Apple ID. I have more access to the electronic ID/mail old, and it is inactive. I have another valid Apple id, but keep getting requests for the old id

  • error of redeclaration exporting DLL sgtruct

    Another day another problem. Fisrtly, I would like to thank to all those who want to help these a quite obvious N00b in the field of the ICB.  I am going through a learning curve steep with CVI at the moment... My problem is: I get an error of "Redéc

  • Keithley 6485

    I have a question. When I record current values, which is the unity of values? (with RS-232) I'm sorry. My keithley 6485 are borrowed by another lab, so I couldn't find the unit.

  • service host process windows error and error of bad image with diasymreader.dll

    I recently got a computer(windows_xp).i plugged card reader and unfortunately, I opened movies (host process for windows services). This is the only mistake made by me.there after, as I begin my computer a dialog titled FORM 1. whereupon my computer