HP G62 - 355DX Notebook PC: new windows copy

Similar Questions

• HP G62-355DX has BIOS Ver F.29. but the show F.27 HP Web site

  My HP G62-355DX has BIOS Ver F.29, but the site Web of HP see F.27.

  List of all the Version of BIOS HP G62-355DX

  Anothere user had same issue (see last post)

  Why is this? Is this update to the Bios Beta I have on my laptop?

  I check each version of bios Fix/improvement to see if it was a type-o in the update of the BIOS code, but said nothing he was.

  It is not a beta BIOS, F.29 and F.28 are available for G62-229WM that uses the same motherboard of your laptop APC-SPS-592809-001 SYSTEM BOARD UMA MDM CR

  Perhaps the BIOS has been updated with HP support assistant, but I'm not sure about this.

  BIOS G62-229WM

  HP G62 - 229WM NOTEBOOK PC (game details)

  HP G62 - 355DX NOTEBOOK PC (game details)

  Good luck.

• Going to replace my hard drive, I'm unable to use my OEM of Windows Vista 32 - bit with the new drive copy?

  I plan to replace my current hard drive (which is functional, but not surprising in the first place) with a Solid State drive, which will help to my Alienware Area-51 m9750 notebook.  I find a reader fully compatible solid state, but I'm not there purchase Alienware.  I'm currently under Windows Vista Home Premium (32 bit), and I still have the recovery DVD used to reinstall the operating system.  I reformatted my hard drive several times using this disc, each time that the deletion of the whole score and starting from scratch.  Every time I did it, I'm never asked to activate my copy of windows, mysteriously turned on when I boot on my new install of Windows for the first time, without even plugging the cable Ethernet first, and my house has no wireless network.

  I wonder, if/when I install a new hard drive, will have a different experience somehow in regards to Windows activation?  I'm unable to use my OEM of Windows copy at all?  Alternatively, my windows mysteriously will activate itself without ever seeing the internet as it does now?

  I love installing Windows and then do not need to activate it, and I hope I have that experience when I install my new hard drive.

  I just want to know what to expect in terms of my ability to use my copy of Vista OEM, and what process I have to go through to make it fully functional.

  Thank you very much!

  "Gamer6789" wrote in message News: * e-mail address is removed from the privacy * .com...

  I plan to replace my current hard drive (which is functional, but not surprising in the first place) with a Solid State drive, which will help to my Alienware Area-51 m9750 notebook.  I find a reader fully compatible solid state, but I'm not there purchase Alienware.  I'm currently under Windows Vista Home Premium (32 bit), and I still have the recovery DVD used to reinstall the operating system.  I reformatted my hard drive several times using this disc, each time that the deletion of the whole score and starting from scratch.  Every time I did it, I'm never asked to activate my copy of windows, mysteriously turned on when I boot on my new install of Windows for the first time, without even plugging the cable Ethernet first, and my house has no wireless network.

  I wonder, if/when I install a new hard drive, will have a different experience somehow in regards to Windows activation?  I'm unable to use my OEM of Windows copy at all?  Alternatively, my windows mysteriously will activate itself without ever seeing the internet as it does now?

  I love installing Windows and then do not need to activate it, and I hope I have that experience when I install my new hard drive.

  I just want to know what to expect in terms of my ability to use my copy of Vista OEM, and what process I have to go through to make it fully functional.

  Thank you very much!

  The physical hard disk (solid state or record) is not serious for the operating system that is installed on.  As long as the drive is a standard interface and does not require special drivers not work (and most don't), you should have no problem.
   
  The recovery disks you are using are set to read specific information about the motherboard and as long as there is this particular information, that it is looking she will be triggered and doesn't have to go online to activate as the retail of Windows is required to do.  The only problem with this type of activation, it's that if the motherboard fails ever it should be replaced with a similar brand and model or autonomous activation fails and the operating system is an OEM version that is related to this motherboard and cannot be enabled on a newer replacement.

• About installing windows XP in laptop HP G62 - b18SA Notebook PC (XF230EA)

  Hello

  recently, I bought new HP G62-b18SA Notebook PC (XF230EA) with processor i3, 3 GB ram with windows 7 os... But I want to install windows XP. I can easily make it or do some problems during the installation of windows XP... Plez reply

  Thank you

  You can install windows xp on the laptop, but I don't think that you can get everything to work perfectly, because this laptop is designed for windows 7.

  In addition, I don't get what the point of buying a laptop with modern material and using an obsolete operating system. I can understand that people are accustomed to XP but you wouldn't get a maximum return of i3 processor/3 GB of RAM on a computer with windows XP.

• I can't download to work - it does not copy the mp3 files to my location (as defined in tools/options) - it gives me a new window with a player - no dwnlo

  I am running windows xp sp2 and I put my site to dowload under (Tools/options), but when I select an MP3 file to download, firefox does NOT copy the file to my location of choice on my HD - instead, it opens a new window with a 'player' of fortune and starts to load the player with the MP3 file. The problem is that I have no idea where on my system, firefox has copied this file, so, I can't leave and come back later and read this MP3 file using winamp. I need to hear right then or lose - if I close this new window (with this puny little ' player'), then I lose the download, there where to put firefox on my PC (I have no idea where it is). It's all under firefox 25.0

  I also use FIrefox 12.0 on an older windows 2000 machine and that works perfectly - I can download any MP3 file, I want to, and downloads of firefox 12.0 (on win2k, sp4) to my location (on my HD), and it gives me the download window so I can watch its progress and have some control over break and resume , and, when it's done, the download window offers me the option 'open containing folder' so I can make sure that where I wanted. In other words, Firefox 12.0 on WIn2k, sp4 works better than firefox on winxp sp2 25.0! What gives? I went through and set up my options for XP just like I did with Win2k and everything looks good, but firefox 25.0 don't know just my chosen and always default place to give me fortune player and I am not able to actually copy the mp3 files on my hard drive - it's firerox almost unusable 25.0 since downloading mp3 files is a big part of my use firexfox - please help. I am not able to upgrade windows at this time, and since firefox 12.0 still works fine on win2k, I do not understand what has happened to firefox?

  Hello littleberry, you can click on the link that leads to an mp3 file or right click on the drive in firefox and choose to download the file like that...

• How to get a new windows 7 or xp free CD or DVD Copy... __plz help me this is my email-id(Email removed for privacy) _

  How to get a new windows 7 or xp free CD or DVD Copy...
  Please help me this is my e-mail id(*** Email address is removed for privacy ***)
   

  Free? I don't think so.

  Contact customer service from Microsoft to see if you qualify to ""free ". "

  See: How and when to contact Microsoft and support Customer Service

  http://support.Microsoft.com/kb/295539 >

  How to replace Microsoft software or hardware lost, broken, or missing

  http://support.Microsoft.com/?ID=326246

• need help to find/download program "windows Easy Transfer" if I can copy/move files/programs from the windows XP to new windows laptop desktop 8

  Read online somewhere that there is a program of "Windows Easy Transfer" of the program, which was set up to manage the transfer programs/files from a pc to another.  My challenge going on my desktop XP files/programs to a new laptop to Windows 8.   From now on... I can not find the program "winds easy transfer.    Any ideas on how to accomplish this or does anyone use this program... and the results as expected?   THX.    Dave

  Hi Dave,.

  
  Tool using Windows Easy Transfer, you can automatically copy your files, photos, music, e-mail, settings, and more to your new Windows 8 PC. This software allows you to transfer data with cables of simple transfer or through a network, external drive, or a CD/DVD.
  To download the Windows Easy Transfer for Windows XP tool, see this link.
  

  http://www.Microsoft.com/en-in/Download/details.aspx?ID=7349

  
  To transfer files and settings from another PC, see this link.

  http://Windows.Microsoft.com/en-in/Windows-8/transfer-files-settings-another-PC

  Hope the above information is helpful. If you have any doubts, please reply to this message and we will be happy to help you further.

• Select CTRL or copy, does not work - using the new Windows 7-

  Using the new Windows 7, it still does not work:

  > To select the non-consecutive files or folders, press in and hold the Ctrl key and then click each item you want to select.

  There is also the same problem when you use the Ctrl key to 'Copy', rather than 'move '.

  Sometimes a reboot will fix it, but other times not. Is it an appropriate solution for the Ctrl key work properly?

  Hello

  It is difficult to imagine a particular key for only certain combinations of keys does not?

  Here are a few troubleshooting steps that you can try to isolate if all goes well the problem.

  1. start the computer Safe Mode and try to reproduce the problem. Start your computer in Safe Mode

  2. perform a clean boot, and then follow the instructions in the following article to help identify the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  3. create a new user account, log in to the new account and test the issue. Create a user account

  If this step resolves the issue, is that your user account may be damaged. Replace

  your original user account.  How to fix a corrupted user profile.

  Let us know the results.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• Windows 7 HP G62-340US Notebook Recovery Fail

  Hello

  I searched a bit and couldn't find a solution to my problem, either on the forums or official guides.

  Recently I bought HP recovery disks system (because it wouldn't let me create my own):

  Startup recovery Manager does not allow me click on left - recovery option it is grayed out.

  How can I reset my computer to the conditions of the factory with the disks?

  I insert the disc recovery 1 (of 2), restarted unplugged everything except the power cord the computer (off, waited, then restarted), you can press F11 and consulted the at startup recovery manager - still no option to make the system recovery. I repeated this step several times.

  Windows 7 HP (64)
  G62-340US Notebook
  Series: CNF0502D9C

  Any tips?

  Hello

  Good to hear it is running

  About whether or not to use the drive, it is really a matter of personal preference - my personal opinion would not not use it just to keep the machine free of bloatware.

  In addition, if it lack of pilots (looking for the warning icons in Device Manager), they can be downloaded from your product on the link Page.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=4308554#N1691

  If there is no missing driver you don't know what to download, go to Device Manager, right click on the device problem, and select Properties.  Click on the Details tab, choose hardware ID in the drop-down list and post back with the details presented in the title of the value.

  Kind regards

  DP - K

• Recently, I changed my motherboard now, today, I get "this copy of windows is not genuine" that I have to buy a new windows to fix this?

  so jve had this new mob for nearly a month and today I received the message, to solve this problem, I have to buy a new windows 7, copy is authentic as the hard disk using a store bought pc im, im not exactly rich just go and buy a new windows at the moment as im still in school.

  Thanks in advance

  you have two problems:

  1. you use an Acer OEM SLP key on a motherboard retail. that does not work.
  2. your license is OEM and cannot be transferred to a new motherboard.  (the only exception is specified replacement manufacturers had to make defection)
  If you have a certificate of authenticity windows 7 you can try to change the product key of your COA and activate by phone. There is a chance that they will be activate it for you.
  OEM SLP: This key comes pre-installed in Windows, when it comes to the factory. This key is designed to work with the special instructions isn't on the hardware of this manufacturer. Then, when Windows was installed using the OEM SLP (in factory) Windows 7 key leans on the motherboard and he sees special instructions and activates

• When my Captivate project is published on my LMS, course opens a new window.  You are able to copy the URL of this window and access the course without logging into the LMS.  How can I avoid this?

  When my Captivate project is published on my LMS, course opens a new window.  You are able to copy the URL of this window and access the course without logging into the LMS.  How can I avoid this?

  Return to your LMS administrator and ask them why they have not put in place more firmly. The scenario you mention should not occur if the LMS is well attached.

  Some LMS have the contents of the course are in a folder outside the web space so that users can access the course URL directly.  For example, Moodle t - it this way and then shot the course content in a temporary folder when the learner clicks on the link ask a module.  No matter how your LMS is supposed to do, it is currently not configured correctly.

• When I open a new tab, a new window opens

  I used to be able to open multiple tabs in the same window of Firefox. Now, every time I click on a link or access an external link hyper, a new window opens instead of a new tab in the existing window.

  Browser.Link.open_newwindow has the value of integer type and a value of 3.

  It seems not to matter. The problem persists. I don't want to do a refresh or uninstall and reinstall a new copy. What can I do to fix this? As I said, it has never been this way before and it seems to have started to happen out of nowhere.

  Try to set browser.link.open_newwindow.override.external 3 as well.

  Have you checked your extensions (associate tab)?

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe

• 'Right click menu/open in a new window' does not-nothing happens.

  When I right click on a link, a menu very long comes with many choices that have nothing to do with the links (like 'copy image'). When I select "open in new window' or 'open in a new tab', nothing happens. I've just updated to the latest version of FF yesterday (08/05/13). I don't have whatever it is personalized for the new facility. Before to install the new everything worked fine.

  Hello lindal, this is most likely caused by an outdated addon. one of them is firebug, so in case you have installed, please upgrade to the latest version.

• 20.0.1: file == > new window & private in new window only will not open then Firefox will not stop running when the application is closed

  Although nothing seems to happen when clicking new window or new private window, there seems to be some process started because when I try to close Firefox and reopen it, I get an error message saying that Firefox is already running. My only option then is to stop the process through the Task Manager. I tried (many times) to uninstall and reinstall.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode safe or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Create a new profile as a test to see if your profile is the source of the problems.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but make sure not to copy corrupted files.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• No text at all in the address bar when you open a new window

  After update (last 2 I think?) currently 16.0.2 worm, when I open a link in a new window, there is no text in the adressbar. The reload or bookmarking a page like this does not work because the address is empty, I have to open the properties page copy the link, paste it into the address field and go to the page. He can not find any info on how to restore the previous working state. Present address in new tabs, links in the same window, etc.

  It's weird. Couple questions:

  Does it matter how to open new window, for example, if you (1) right click > open link in a new window, (2) shift + click the link, or (3) there is a pop up generated by the page?

  If you right click on the content of the page, the menu has a submenu 'this framework', which would indicate that the page is framed?

  Where this is caused by an add-on, a standard Diagnostics in order to avoid interference by extensions (and some custom settings) is to try the Mode without failure of Firefox.

  First of all, I recommend you backup your Firefox settings in case something goes wrong. See back up and restore the information contained in the profiles of Firefox. (You can copy your profile folder Firefox together somewhere outside the Mozilla folder).

  Then restart Firefox in Mode safe (questions to troubleshoot Firefox in Safe Mode) of Firefox help

  Help > restart with disabled modules

  In the dialog box, click "start mode safe."

  If the site is working properly, it points to one of your extensions or custom as the problem settings.

  To disable the plugins and extensions, you can try here:

  Orange Firefox button or classic menu Tools > Modules > Plugins category

  Any change?