Can not access the system restore.

Similar Questions

• Key board does not work correctly when you type. Can not get the system restore to work properly, either

  Tried to run the system restore, but it will not restore.

  Hey AnnEdelstein,

  Because you can't get the system restore to work, perform a clean boot on your Windows XP system. The guide to that is here. Which follow, and then try again to Outlook. If it works to the minimum, then boot in the boot, analyse the whole system with your Antivirus and other security you have.
  Also make sure you have the drivers for the keyboard. Search for the manufacturing of the keyboard, and they should have the drivers on their support site. I hope this has been helpful!

• can not get the system restore to work

  tried to get the system restore back to an earlier time. says I need to get rid of the useless programs.did who. I have also some icons for files, tools or downloads

  In addition to what has been mentioned, consider the following:

  First of all, what is the last time that the restoration of the system worked?

  Check your system restore settings:

  1. Click Start
  2. Right click on my computer
  3. Click on Properties.
  4. Click on System Restore
  5. If system restore is enabled, the column status of a player will show surveillance.
  6. If not, you can delete ""disable the system restore on all drives ' and then click on OK to activate "

  Is both as soon as you try to restore to the most recent available? If so, unless you have specific reasons to keep the previous restore points, clean the rest, so that you have the most recent restore point on the left.

  To do this:

  1. run Disk Cleanup

  2. click on more Options

  3. under system restore, click cleaning of

  4. click on OK

  This will free up the space. System restore needs a minimum of 200 MB of space to work.

  Reference: http://support.microsoft.com/kb/300044

  Hope this helps

  Post back if necessary

  _________________________________________________________

  If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I can not access my system restore.

  When I click on the system restore, nothing happens. It is not on my Add / Remove programs. What can I do to get it back? Thank you.

  System Restore can be run in normal mode or safe mode.

  It is not located under the Control Panel Add/Remove programs.

  Instead it is located via the button start > all programs > Accessories > system tools.

• Browser crash, restart on its own, can not do the system restore. Help!

  OK, so I tried EVERYTHING I know how to do, and some things I did research.

  Whenever my computer restarts itself, I get an error message saying that there is a faulty driver.

  I checked my drivers with the audit tool, nothing.

  I uninstalled all unnecessary programs I could find (nothing critical, just programs like Glary Utilities, Acrobat, Flash etc..).

  Eventually I got to a point where everything I did was to get worse, and my computer told me that Windows did not start upward.  I rebooted in safe mode and tried to do a system restore.  Cannot restore point to restore I get an error indicating that the system restore was not successful.  I tried FOUR different restore points.

  I'm at my wits end!

  I don't have my Windows XP cd, or one of the disks with the computer came.  This used to be my computer at work, but let me keep as part of my departure, so all the disks are in the old company.

  Please help :(

  Computer: Dell
  Intel Core 2 Duo 2 G of RAM, Windows XP Professional

  (For some reason, the police in your post is a very light gray!)

  Please transmit the full text of the error message.

  You used the phrase "everything I've done." In addition to uninstall unused programs, what else do you have?

  If your company gave you this PC, they should have you good discs too. Fortunately, Dell XP Pro installation CD are ubiquitous and interchangeable. First of all, contact Dell to see if they can issue you a. Otherwise, see if anyone you know has one.

  A number of security (for example, Norton and Zone Alarm) programs interfere with the restoration of the system. If you identify your security programs, we can tell you how you can get the system restore to work. For now, these pages can help:

  http://bertk.MVPs.org/html/srfail.html

  http://bertk.MVPs.org/html/symantecdoc1.html

  You should be able to disable your restarts automatically in this way:

  http://pcsupport.about.com/od/tipstricks/HT/disautorestart.htm

  Finally, what is the status of this PC malware?

• whenever I get the error message and I can not get the system restore or the automatic updates touch

  whenever I try to use the system restore I get the message that it was impossible to restore to dat what I ever try to restore any file were change

  more my automatic updates keep coming up it downloads according to the full upgrade, then the icon disappears, then comes back and he wants

  upgrading again any suggestions

  Hi chuckdutton,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. What is the reason for the execution of the system restore on the computer?

  4. do you have security software installed on the computer?

  5. you receive similar message appears when you try with different restore points?

  There are various reasons for the system restore fail on the computer.

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Also see the article below and check if it helps.

  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP

  http://support.Microsoft.com/kb/302796

  Refer to the article below and try the steps mentioned, check if that fixes windows update icons that appear on the system tray.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

• Pavilion dv4: Windows 7 does not start and I can't access the system with f11 recovery

  I use a Pavilion dv4. Windows just crashed on a blue screen with a message about physical memory dump. Now when I start the computer it will just a black screen with a blinking cursor to the place when windows normally should start. I can not access the system with the f11 key recovery. I went in with the f2 key diagnostic mode. Diagnostic tests except for the battery test that failed, but shouldn't the laptop to be able to run without a battery if it is connected? And besides, if the problem was the battery, the laptop wouldn't be able to turn on at all, no?

  I'm not about to spend all that money on a battery just to know that it is not the battery.

  Hello

  If you have the 64 bit rescue CD, you would have received an error if it was bad.

  Once you have all your data backup, try the following - which means that Windows has been installed on the C Partition.

  Boot from the new rescue CD, select repair your computer and choose the command line.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart now.

  Kind regards

  DP - K

• How do I access the system restore from the bios my 32-bit vista starts up?

  I have vista home basic 32 bit and recently uninstalled a program I have used barley I used uninstall programs. It then prompted me pourredemarrer my computer after doing so, I am nowunable to pass the 'lights', he goes to Jordi screen w / mouse enabled if she sits for a while, a screen saver in vista can be seen.
  He will not start in safe mode. chkdisk ran, and I thought for sure he was going to "start, but didn't."
  can anyone help? I have not my install discs because they were lost in a recent move, thanks joe

  Hello

  You can not access the system from the BIOS recovery.

  F8 boot Options is your hope, but you say that they do not work

  You need a Microsoft DVD to do a startup repair, or a restoration of the system, thanks to this Guide.

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  See you soon.

• I can't do the system restore and I have nothing on my "All programs" button, which means that I have not accessories, System Tools, etc. How can I get that back?

  I can't do the system restore and I have nothing on my "All programs" button, which means that I have not accessories, System Tools, etc. How can I get that back?

  Hello CalebCox,

  I suggest that you try the methods below to resolve this issue.

  Method 1:

  This problem can be caused due to infection by the Virus. I suggest that you run a virus scan on your computer using Microsoft Safety scanner and check if you have the same problem.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Check if you have the same problem in the new user account.

  You can refer to the link below, which will give you information on how to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

  If works, you can copy data to the new user account:

  http://support.Microsoft.com/kb/811151

• Impossible to access the system restore, getting the error "system restore has been disabled by group policy.

  Recently, I was hit by a virus that, among other problems, he blocked my access to the system restore to clear it. After having had my pc repaired I can not even access the system restore or my registry. I get a message from that system restore has been disabled by group policy. It's my own pc and I am the administrator. I've tried a few things without success. I hope someone can help me with this. I have the vista operating system.

  1. click on start, run and type regedit.exe , and then press enter

  2. navigate to the following key:

  HKEY_LOCAL_MACHINE-Software-policies-Microsoft-Windows NT------SystemRestore

  In the right pane:

  • Delete the value DisableConfig
  • Delete the value DisableSR

  3. exit the registry editor.

  Other tips, tricks and support are available at: www.waltwachon.weebly.com

• My desktop computer shows that it is connected to the network. However I can not access the detained.

  without intwernet access network connection.

  My desktop computer shows that it is connected to the network. However I can not access the detained. Other computers using the wireless modem work fine. I'm NOT computer savvy, so I am at a loss. I ping tri3ed myself and the result is unanswered.

  Hello

  You can consult the following thread link and check.

  PING: transmit failed, error code 5.

  Important: The above link contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  Back up the registry

• When a user logs off Windows 7 x 64 session, the rest can not access the internet until the restart network card

  Hello! I found a problem with my system: when a user logs off Windows 7 x 64 session, the rest can not access the internet, until restarted network card. Reinstall NIC driver did not help. Problem appears on a built-in adapter, in the motherboard and a separate PCI card too.  Same router via its web interface is not accessible. Windows cannot automatically fix this problem after trying to diagnose a problem with his problem Diagnostic tool. After the diagnosis in the DETAILS window, MORE tests, it displays a message like this "computer remote can not receive a connection via the Internet (HTTP) Service Port". "Unplugging" a corresponding Local network connection and then reconnect solves the problem immediately. Switching between users, when two of them are connected do not cause this problem. Important: the problem occurs in the account of the user who was logged on the system FIRST after the PC was on, when the user disconnected on newspapers of a SECOND. If the SECOND user is logged in and the FIRST user disconnects, SECOND can still access the internet. It depends only on the sequence of the user's record, not on the particular user name. And one more interesting fact: after each user registered on and outside just for once, the problem seems to disappear until the PC is turned off and turn it back on!

  System details:

  Motherboard: ASUS P8Z77-VLK
  CPU: Intel Core i7 3770 K
  RAM: 8 GB
  OS: Windows 7 x 64

  Hi, Mahesh,

  and thank you very much for your help! Update firmware driver and router LAN did not help me get rid of my problem, but greatly improved my experience of networking in general. Anti-virus software was not guilty, also, but! I found the "iControl" network software, installed as part of Sogiciel 'AI Suite II' (that came on the CD of motherboard ASUS driverssoftware), runnning and causing not only the problem mentioned above, but would also decrease upload speed up to 0.3 MB/s, when download passes to nearly 100 Mbps! Moreover, searching the Internet, I have found a lot of complaints about the behavior of this software, so that people watch you the occasional installation of this piece... sweet ;) As "iControl network" has been uninstalled (not only turned off in the settings of 'Ai Suite II'!), I'm totally happy with my system performance.

  Best regards
  Greg

• Lack the profile can not access the Profile Manager, cannot be continued

  Yahoo somehow accessed and changed the settings of my browsers safari and firefox, could not change the settings for search engine default for more than a minute, even remove engine from yahoo wouldn't last a minute, so I deleted firefox, re-uploaded, now my profile is missing...

  I can not access the Profile Manager via the Terminal, I can't do anything, Firefox is not operational at this time and I don't know how to fix it.

  In Mac OS X v10.7 and later versions, the ~/Library folder is a hidden folder.

  • http://KB.mozillazine.org/Show_hidden_files_and_folders#Mac_os_x
  • http://KB.mozillazine.org/Profile_folder_-_Firefox#Mac
  • < User > /users//Library/Application Support/Firefox/profiles.ini

  See also:

  • https://support.Mozilla.org/KB/how-run-Firefox-when-your-profile-missing-or-inacc

• Can not access the recovery on M30 partition

  Hi all

  I use a Toshiba M30. Last week, I uninstalled the old version of Norton Antivus to install the new version of Norton Internet Security. After you have uninstalled the NA, I found that my phone does not work normally. I, therefore, formated C pilot. Then, I could not access the recovery partition to reinstall the OS.

  How can I solve this problem?

  Thank you very much.

  CUONG

  Could you please be a little more clear on the problem.

  You try to use the recovery CD? Why did you format drive C? When you say that you can not access the recovery partition, how are you trying to access? through BACK.

  Sorry, but your question isn't very clear and a bit confusing. Thank you very much

• Satellite L350: Can not access the recovery partition by pressing 0

  Heya

  I can not access the recovery on a Toshiba L350 Manager. I tried pressing 0 (zero, two of them) at first to access HD-recovery, but nothing happens. Is there something obvious that I'm missing?

  The reason why I want to access is:
  I have a l350 Toshiba with a partially installed windows here. For now, he gets the "starting Windows" and "instalation program's services began" (in Norwegian) which stops with a popupbox saying: "the computer unexpectedly inexplicable, or an unexpected error has occurred. The site amenities cannot procceed. To install Windows, you will need to click ok to restart the computer. Start the installation process. ».

  What started the problem was that during the last part of the installation (after Win7 becomes usable, but above all has been installed), escape was pressed, and the computer has been used normally.

  > I can not access the recovery on a Toshiba L350 Manager. I tried pressing 0 (zero, two of them) at first to access HD-recovery, but nothing happens. Is there something obvious that I'm missing?

  I assume you are using a European model for laptop and so you should try it;
  -Press on F8 laptop computer power on.
  -Then choose fix my computer
  -Then Toshiba HDD Recovery.

  This should allow you to start the Toshiba HDD recovery process.