HP G72 - c55DX Notebook PC error 303

Similar Questions

• HP G72 - c55DX Notebook PC: recover lost drivers.

  Laptop crashed after that windows x. installation could not even return to the factory settings, all lost data. Windows 7 installed again but my laptop seems to be missing several drivers. There are no options for vga adapters in my hardware profiles equal access. Now the machine is only good for surfing the internet. Any game I'm trying to play causes my processor overheating and close.  Bought this laptop when it was new and I know what he is capable, but now it's just a shell of his former self.

  Hello:

  According to the specifications of this model, your laptop comes with W7 64 bit, but you said that you only run W7 32 bit.

  I don't think there are 32-bit graphics drivers for your laptop, to see if this driver graphic 32 bit to a computer laptop works...

  This package contains the Intel video driver and control panel for the notebook models and operating systems.

  FTP://ftp.HP.com/pub/SoftPaq/sp47001-47500/sp47229.exe

• HP G72 - b63NR Notebook PC: scrolling Touchpad no longer works

  I have a laptop HP G72-b63NR, and scrolling touchpad stopped working the other day. Don't know what to do to get it up and running again... Help appreciated!

  Hello

  Try the following.

  First, download the latest installer driver Synaptics, on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp50501-51000/sp50703.exe

  Then, open windows control panel, open programs and features, right click on the entry "Synaptics Pointing Device Driver" and choose uninstall.

  When this has completed, restart the laptop.

  When windows has completely recharged, open your download folder, click with the right button on the setup of Synaptics and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  Then you will need to configure the options of your choice - to do this, open windows control panel and on the top right, next to the display by: select "large icons".  Since the new layout, select mouse, select the settings tab and then click on the settings button - see the document on the following link for the options generally available.

  http://support.HP.com/us-en/product/HP-G72-b00-notebook-PC-series/4247537/model/4317554/document/c01876141/

  Kind regards

  DP - K

• G72-c55DX P6100 processor I5 upgrade

  I have a laptop G72-c55DX that comes with the 2 core 2.0 ghz Pentium 6100 in a socket (PGA988) G1, I see of other computers sucessfully portable brand owners upgrade this processor to an I3 or I5 processor and I'm looking for confirmation that the bios of my computer accepts the new processor. Thank you

  brownboy3491 wrote:

  I have a laptop G72-c55DX that comes with the 2 core 2.0 ghz Pentium 6100 in a socket (PGA988) G1, I see of other computers sucessfully portable brand owners upgrade this processor to an I3 or I5 processor and I'm looking for confirmation that the bios of my computer accepts the new processor. Thank you

  Hello

  There's a HM55 chipset then the first two generation of Intel Core i3 and i5 are compatible. The best compatible processor for this laptop is a Core i5 - 540 M. Looking for other options and here part numbers:

  http://h10032.www1.HP.com/CTG/manual/c02623152.PDF

• I have a HP G72-C55DX with a bad drive

  I have a HP G72-C55DX with a bad drive - WD5000BEVT-60A0RT0 which drive can I use to replace it? Running Windows 7

  Hello

  The HARD drive on the link below is an example of a suitable replacement and should be a little faster as you are original drive because it has a rotational speed of 7200 RPM.

  500 GB hard drive for laptop.

  If necessary, the replacement procedure is detailed starting at Page 43 of your & Maintenance Guide.

  Kind regards

  DP - K

• G72-c55dx 301 imminent failure message. HARD drive passes Diagnostics.

  My G72-c55dx is to get a 301 imminent failure message. I backed up my files and then ran diagnostics who said that the drive to pass. What now?

  There were three test; one for memory and two for the hard drive. A test for hard disk took around half an hour, and the other took several hours. All three passes.

• Package swf and xml for iOS using CMD - getting .xml: error 303

  A solution proposed by Adobe (associated with a bug report) I'm supposed to make the file iOS, using CMD rather than publishing automatically in Adobe Flash CS6.

  I'm not very good in CMD, then in this case, when I open CMD and go to the same location as the fla and other assets, and then copy and paste this code in it:

  F:\sdk\bin\adt-Paquet - target the ipa-app-store - useLegacyAOT Yes - implementation service-profile 'Hajj.mobileprovision' - stores pkcs12 - keystore "Hajj.p12" - storepass myPass Hajj.ipa Hajj - app.xml Hajj.swf

  First of all, it starts to process, means that the path is correct. But then I got some errors related to missing icon files:

  .xml: error 303: icon/icn_48.png icon does not appear in the package... (also any other icons I have)

  If of course they are in the icon of file, same that mentions in XML:

  < image48x48 > icon/icn_48.png < / image48x48 >

  ...

  I tried to copy the icons in the same location as the Fla and also the modified icons as Xml path, but I always Erros:

  < image48x48 > icn_48.png < / image48x48 >

  ...

  
  

  Any ideas what I'm doing wrong please?

  Kind regards

  Ali

  Add the folder icon in the application by adding it to the command:

  HAA... Hajj.swf icons

• Error: 303: unable to load a resource: can not access the resource file (try loosening Flash security)

  Error: 303: unable to load a resource: can not access the resource file (try loosening the Flash security settings): error #204 in shockshare.com and putlocker.com any help please?

  When I was watching a movie... There was a link, I always watched movie shockashre and putlocker.com but today, I saw this problem and don't kno how to solve

• Receiving S.M.A.R.T. messages error (303) &amp; (301) codes to the power upward?

  Recently started to receive S.M.A.R.T. error codes (303) & (301) on my Compaq Presario CQ57-339WM laptop. I think I have replace the hard drive, but a set of recovery discs were never made for this laptop. I have a disc of Windows 7 Premium Edition family to help re - install, but do not know what else I have to get up and running? I got most of my stored important Info for jump records before it crashed. If anyone can help with the step by step procedure I do would be great.

  Lumberman67 wrote:
  Sorry PeerOne, but did not get a 2nd part to your post?

  The second part is when you replace your HARD drive, you must obtain the recovery disk to restart to factory install in order to get your computer working again.

• dv7t-7200 CTO Quad Edition Notebook PC - errors after 8.1 update update and HP

  I have a HP ENVY CTO 7200 dv7t Quad Edition Notebook PC
  Product number: B6B75AV

  Originally from Windows 8 Pro with Media Center 64-bit

  Upgrade to WIndows 8.1 via the shop
  Everything seemed OK

  HP Support Assistant eliminated 2.1.0.1002Ap4 contained in SP58398 which has updated the driver Intel Rapid Start Technology.

  (A) after the start, I now get an office messages "your system seems not to have Intel Rapid Start with technology."

  (B) if I start the Intel Control Center, I get the message "there is currently no application filed.

  (C) if I start the Intel Rapid Start Technology Manager, also get "your system seems not to have Intel Rapid Start with technology."

  (D) also, if I try to use an application to read data S.M.A.R.T, which also fails

  (E) However, I get the info of PassMark DiskInfo:
  SysInfo DLL Version: SysInfo v1.0 Build: 1041
  Export: 16:18:18 November 18, 2013

  The device information:
  Device ID: 0
  Interface: RAID
  Capacity of the apparatus: 715402 MB
  Serial number: {information}
  Model number: ST750LX003-1AC154
  Firmware revision: HPM1
  Sheet music:
  N/A

  The ATA information:

  Geometry of the disk:
  Cylinders: 0
  Tracks/cylinder: 0
  Sectors/track: 0
  Bytes/sector: 0
  Total of the sectors of the disk: 1465149168
  Logical sector size: 512
  Physical sector size: 4096
  Media rotation speed: 7200 RPM
  Buffer size: 0 KB
  The ECC size: 4 bytes

  Compliance with standards:
  ATA8-ACS taken in charge: Yes
  ATA/ATAPI-7 taken in charge: Yes
  ATA/ATAPI-6 supported: Yes
  ATA/ATAPI-5 support: Yes
  ATA/ATAPI-4 taken in charge: Yes
  Series/parallel: Serial
  SATA 3.0 Compilance: No.
  SATA 2.6 Compilance: Yes
  SATA 2.5 Compilance: Yes
  SATA II: Ext Compilance: Yes
  SATA 1. 0a Compilance: Yes
  ATA8-AST Compilance: Yes
  World wide ID: 5000C5005DF1063B

  Feature support:
  CHIP supported: Yes
  CHIP enabled: Yes
  SMART taken self-test supported: Yes
  SMART error log supported: Yes
  Taken LBA supported: Yes
  Taken IORDY supported: Yes
  CFast taken in charge: No.
  Taken DMA supported: Yes
  DMA multi-word maximum mode supported: 2
  DMA multi-word selected: None
  Ultra maximum DMA mode supported: 5
  Ultra DMA is selected: 5
  Maximum PIO mode supported: 4
  SATA compliance: Yes
  Supported NCQ priority information: No.
  Unload while NCQ commands are exceptional supported: Yes
  The event of PHY counters supported: Yes
  Application of sustained power management: No.
  Set of features taken NCQ support: Yes
  SATA Gen2 signaling speed (3.0 Gb/s) supported: Yes
  SATA Gen1 signaling speed (1.5 Gb/s) supported: Yes
  Software Settings Preservation: Supported, enabled
  Provision of data in the order: unsupported
  Initiate power management: supported, Enabled
  DMA Setup self-actuation: unsupported
  Buffer of zero offsets: unsupported
  Trusted Computing taken in charge: No.
  Host Protected Area (HPA) taken in charge: No.
  Read-ahead support: Yes
  Predictive read enabled: Yes
  Support for write cache: Yes
  Cache write-enabled: Yes
  Power management support: Yes
  Security mode supported: Yes
  Security mode is activated: no
  Device Configuration Overlay (DCO) taken in charge: Yes
  Supported 48-bit addressing: Yes
  Auto-acoustic management (AAM) supported: No.
  Start standby (THEN) supported: No.
  Advanced Power Management (APM) taken in charge: Yes
  Advanced Power Management (APM) enabled: Yes
  Current level of APM: Minimum energy without waiting
  CompactFlash Association (CFA) taken in charge: No.
  General Purpose Logging (GPL) taken in charge: Yes
  Streaming support: No.
  The media card support through: No.
  Supported power conditions extended: No.
  Scope of supported status reports: No.
  Writing-reading-check supported: No.
  Supported free-fall control: No.
  TRIM command support: No.
  SCT command transport supported: Yes
  NV Cache enabled: no
  NV Cache support power management: No.

  SMART ATTRIBUTES:
  ID Description status worst threshold value TEC gross
  ---------------------------------------------------------------------------------------------------------------------------------------------

  Any ideas what is it?

  I tried to save the patch that HP has pushed out, but I didn't, my system state would be if I did.

  Any ideas?

  Thank you!!

  xzr1tv

  Install the new BIOS F29 with

  Supports the feature of Intel iRST systems

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124651-1&cc=us&DLC=en&LC=en&OS=4132&product=5328068&sw_lang=

  Intel Management Engine Interface driver

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-124055-1&CC=de&DLC=de&LC=en

  Update the RST

  https://Downloadcenter.Intel.com/SearchResult.aspx?lang=eng

  Chipset

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=20775&ProdId=816&lang=eng&OSVersion=Windows%208.1 * & DownloadType = drivers

  Check your settings in Bios of RST

• Error 303 and the computer is slow!

  So I played a light game that my laptop can run 200 fps, but when I stopped playing, I restarted my computer and startup has been slow extreme... I have spent 7 from Windows to Ubuntu, and it boots in 15 seconds, but now in 2-5 minutes! I did test drive and it stopped at 61% and error gived 303. What this means, and this makes it my computer slow for no reason, if this means that the hard drive is broken without reason, that I have to send my computer HP or can I move the HDD without losing the warranty? And I forgot, the Compaq Presario CQ56-116SO computer. Help me, im very worried my computer, because if I send HP this laptop I'm afraid they care that the OS is changed, or do you guys recommend me installing Windows before hard drive breaks down complete? I mean I can use the computer, but it is much slower than normal.

  lol I thread on ubuntu Finnish forum and they said, it is fixed in 10.04, but im waiting for the response from HP and I hope they send the replacement of the hard disk, if they send, I use windows for a while. D and in my old laptop I had 9.10 and it never broked hard drive, he was connecting Ubuntu 9.10 to--> 11.04 and again good job, I'm sure that Linux is not a problem, if my old laptop (HP Compaq 6715 s) it runs well without hard disk failure.

• HP Pavilion dv6-1277el blue screen and disk hard error 303

  Hello

  I have a HP Pavilion dv6-1277el with Windows 7 installed. For some time the laptop crashed several times with blue screens until one day windows no longer starts or is is stuck on the loading screen.

  I used an Ubuntu live CD to backup data to the HARD drive of the laptop on an external drive, but after that transfer a large amount of data that I received a warning ON impending drive failure due to reassign areas.

  Restarting the laptop I received the following message from the HP auto test:

  Hard drive 1 fast (303)
  Hard drive 1 full (305)

  The strange thing is that, after the first time that I had these messages, Windows rebooted to work without any problem and I've never had any blue screen again.

  What should I do? Anyway to change my HARD drive or her trust?

  Thank you

  Hello new solvayhütte.

  Probably, he continues to work because it detects a problem with the drive.  However, the reader may not be totally dead immediately.  So now is the time to get ALL the data that you want out of the disc before it goes bad.

  You have two options currently.  You can replace the drive hard yourself (it is not difficult) or contact HP for a repair.

  To replace the drive hard yourself, you can use your notebook PC Maintenance and Service Guide for instructions on disassembly of the laptop.  There are also specifications stating the hard drive inside your laptop.  Use this information to buy a new hard drive and compatiable.

  If you do not want to replace the drive yourself, you can contact HP and inquire about a repair.  If you are within the United States or the Canada you can call to the 1-800-474-6836.  However, if you are outside this area, you will need to go to the HP support site for the contact information for your region.

  I hope that this information has been useful.  Have a great day!

• Export Release Build: error 303 - defining the right path to the PNG file

  Hello.
  I have a 32 x 32 pixels pixels and icon in the code XML Application descriptor file, I tried all possible ways for the icon.png and I get an error message 303. My application deploys fine if I leave aside the icon... just seems to be a path issue but can not understand why... I put the file in the libs folder and tried png just in the src folder, but no luck... I saw other posts talked about checking the 'no embedded files to output folder copy' and I have this checked... Thank you!
  
  

  After trying for centuries created a flex project and copied all the code as a whole in the new project. But did not use the old app - xml file used for the new flex project and the icons have worked.

• HP 14-r017tx Notebook PC: error sp72727

  I had sp72727 for the nvidia driver error

  HP 14-r017tx laptop
  
  Model #: J6L91PA
  
  Serial No.: (deleted content)

  Please send the latest version sp72727

  Kind regards

  Ashura tan

  Send for me sp72727 pls

• How to access my webcam on a computer laptop g72-c55dx

  I have a webcam hp on my laptop G72 - C555DX how can I access it. With a new HDD complicate or make it difficult?

  Hello

  If you haven't already, download and install Cyberlink YouCam from the following link.

  http://ftp.HP.com/pub/SoftPaq/sp54001-54500/sp54246.exe

  Kind regards

  DP - K