HP 14-r017tx Notebook PC: error sp72727
I had sp72727 for the nvidia driver error
HP 14-r017tx laptop
Model #: J6L91PA
Serial No.: (deleted content)
Please send the latest version sp72727
Kind regards
Ashura tan
Send for me sp72727 pls
Tags: Notebooks
Similar Questions
-
dv7t-7200 CTO Quad Edition Notebook PC - errors after 8.1 update update and HP
I have a HP ENVY CTO 7200 dv7t Quad Edition Notebook PC
Product number: B6B75AVOriginally from Windows 8 Pro with Media Center 64-bit
Upgrade to WIndows 8.1 via the shop
Everything seemed OKHP Support Assistant eliminated 2.1.0.1002Ap4 contained in SP58398 which has updated the driver Intel Rapid Start Technology.
(A) after the start, I now get an office messages "your system seems not to have Intel Rapid Start with technology."
(B) if I start the Intel Control Center, I get the message "there is currently no application filed.
(C) if I start the Intel Rapid Start Technology Manager, also get "your system seems not to have Intel Rapid Start with technology."
(D) also, if I try to use an application to read data S.M.A.R.T, which also fails
(E) However, I get the info of PassMark DiskInfo:
SysInfo DLL Version: SysInfo v1.0 Build: 1041
Export: 16:18:18 November 18, 2013The device information:
Device ID: 0
Interface: RAID
Capacity of the apparatus: 715402 MB
Serial number: {information}
Model number: ST750LX003-1AC154
Firmware revision: HPM1
Sheet music:
N/AThe ATA information:
Geometry of the disk:
Cylinders: 0
Tracks/cylinder: 0
Sectors/track: 0
Bytes/sector: 0
Total of the sectors of the disk: 1465149168
Logical sector size: 512
Physical sector size: 4096
Media rotation speed: 7200 RPM
Buffer size: 0 KB
The ECC size: 4 bytesCompliance with standards:
ATA8-ACS taken in charge: Yes
ATA/ATAPI-7 taken in charge: Yes
ATA/ATAPI-6 supported: Yes
ATA/ATAPI-5 support: Yes
ATA/ATAPI-4 taken in charge: Yes
Series/parallel: Serial
SATA 3.0 Compilance: No.
SATA 2.6 Compilance: Yes
SATA 2.5 Compilance: Yes
SATA II: Ext Compilance: Yes
SATA 1. 0a Compilance: Yes
ATA8-AST Compilance: Yes
World wide ID: 5000C5005DF1063BFeature support:
CHIP supported: Yes
CHIP enabled: Yes
SMART taken self-test supported: Yes
SMART error log supported: Yes
Taken LBA supported: Yes
Taken IORDY supported: Yes
CFast taken in charge: No.
Taken DMA supported: Yes
DMA multi-word maximum mode supported: 2
DMA multi-word selected: None
Ultra maximum DMA mode supported: 5
Ultra DMA is selected: 5
Maximum PIO mode supported: 4
SATA compliance: Yes
Supported NCQ priority information: No.
Unload while NCQ commands are exceptional supported: Yes
The event of PHY counters supported: Yes
Application of sustained power management: No.
Set of features taken NCQ support: Yes
SATA Gen2 signaling speed (3.0 Gb/s) supported: Yes
SATA Gen1 signaling speed (1.5 Gb/s) supported: Yes
Software Settings Preservation: Supported, enabled
Provision of data in the order: unsupported
Initiate power management: supported, Enabled
DMA Setup self-actuation: unsupported
Buffer of zero offsets: unsupported
Trusted Computing taken in charge: No.
Host Protected Area (HPA) taken in charge: No.
Read-ahead support: Yes
Predictive read enabled: Yes
Support for write cache: Yes
Cache write-enabled: Yes
Power management support: Yes
Security mode supported: Yes
Security mode is activated: no
Device Configuration Overlay (DCO) taken in charge: Yes
Supported 48-bit addressing: Yes
Auto-acoustic management (AAM) supported: No.
Start standby (THEN) supported: No.
Advanced Power Management (APM) taken in charge: Yes
Advanced Power Management (APM) enabled: Yes
Current level of APM: Minimum energy without waiting
CompactFlash Association (CFA) taken in charge: No.
General Purpose Logging (GPL) taken in charge: Yes
Streaming support: No.
The media card support through: No.
Supported power conditions extended: No.
Scope of supported status reports: No.
Writing-reading-check supported: No.
Supported free-fall control: No.
TRIM command support: No.
SCT command transport supported: Yes
NV Cache enabled: no
NV Cache support power management: No.SMART ATTRIBUTES:
ID Description status worst threshold value TEC gross
---------------------------------------------------------------------------------------------------------------------------------------------Any ideas what is it?
I tried to save the patch that HP has pushed out, but I didn't, my system state would be if I did.
Any ideas?
Thank you!!
xzr1tv
Install the new BIOS F29 with
Supports the feature of Intel iRST systems
Intel Management Engine Interface driver
http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-124055-1&CC=de&DLC=de&LC=en
Update the RST
https://Downloadcenter.Intel.com/SearchResult.aspx?lang=eng
Chipset
Check your settings in Bios of RST
-
Anyone happen to know what this error message is referring to, or what should I do?
It unfortunately and it does not say aything else. There only the option to click OK that closes just the box pop up.
Its been popping up randomly in the past several times I used the laptop. Initially I thought that it was because there was still thinking it would correct after the execution of the latter but its re-appeared again and updates to run. It does not ask respect or other options to solve the problem?
Send a print screen but don't know how?
I have not had this laptop of all (about 2 months) and don't expect to have problems of this kind already! Any help appreciated
Thanks in advance
Hello
This problem occurs because of MS Office (tails, corruption).
Try reinstalling Microsoft Office as follows:
1. uninstall all MS Office applications in a standard way via Add/Remove Programs, restart.
2. use instructions and special removal tools to remove completely all MS Office applications:
-office 2013 or earlier version: install this tool http://download.microsoft.com/download/0/e...16a296a/ork.exe, go to start-> all programs-> Microsoft Office-> Microsoft Office Tools-> Resource Kit Microsoft Office 2003-> removal Assistant, in the Removal Wizard, select 'Comepletely remove all versions of my previous Microsoft Office application' and follow the instructions;
-for Office 2007, 2010: http://support.microsoft.com/kb/971179
-office 2013, 365: http://support.microsoft.com/kb/2739501/en
3. manually remove all objects listed under:
-C:\Program Files\Microsoft Office
-C:\Program Files\Common Files\Microsoft Shared\OFFICE *.
-C:\Documents and Settings\All Users\Application Data\Microsoft\OFFICE
-C:\ProgramData\Microsoft\OFFICE
4 restart, make sure that the problem is not reproduced more.
5 install the necessary package of MS Office.
By clicking the Thumbs-Up is a way to say - thank you! ******
* Click on I accept as Solution on an answer that solves your problem to help others *.I am an employee of HP
#HPExpertsday
-
HP Pavilion Notebook 17: Error in file history
64 bit. I'm trying to use the history of files to back up my files on a 16 GB Lexar (F) drive on a usb port. I get an error message saying that the drive is not connected. It is false, that I am able to save files individually in the drive. I tried to disable and re-enable the drive. The drive appears in good health until I try to run the history file.
John,
Welcome to the Community Forum of HP.
Comment
It's a tiny USB - don't forget that file history will catch everything that is in your library, including your files to a disk if they are "available offline". Data can add up quickly. The smile.
A few ideas
- You could try to format the drive in NTFS and see if that helps.
- The USB is maybe just too small; Try a larger drive. OR > reduce the folders in your libraries.
- You can try another brand - from his personal experience, I found that not all USB keys are equal for all tasks. We can fight it or just try something else.
Once you get the running configuration: you can view the event log history file under Advanced settings.
Click on the Thumbs - Up Kudos to show that you appreciate the help.
I am happy to provide assistance on behalf of HP. I do not work for HP.
Click on accept as Solution when the answer provides a fix or a workaround!
Reference:
-
1000 HP Notebook PC: Error Message 90 b fan in the system at startup
Hello!
My cooling fan does not work, this morning I turned on my PC and error 90 b of the fan came. How can I fix it?Dear customer,
Welcome to the Support Forum HP and we are happy to help you
Looks like you are having difficulties with regard to your Netbook cooling fan
We will surely help you with this
According to the message that you have posted, I suspect that it is purely a matter of material where in your message 'System Fan(90B) - the system has detected that a cooling fan does not work properly' get. It is a mechanical failure and fan cooling of your laptop and must be replaced before the laptop starts with an overheating problem.
Causes/reasons for this problem:
1. sometimes, it's just because of the dust, animal pet hair slows down the fan
Perform the illustrious below troubleshooting steps:
Step 01. Turn off the laptop
Step 02. Disconnect the power/AC adapter and also remove the battery too
Step 03. Press and hold the power button of the laptop for a minute
Step 04. Now re - insert the battery back in and plug again the power supply/adapter
Step 05. Start Notepad and keep pressing the F10 key during startup to access the BIOS
Step 06. Once you get the BIOS, please press F5 to load the default Installer for BIOS
Step 07. Now press ESC/ESC. Save Changes and Exit - Yes
Step 08. Now please wait unit loads Windows and then stop the Netbook again
Step 09. You need to clean all vents and openings that are really good with a can of compressed air
Note: If you still get the same error, we need to replace the fan
I highly recommend you immediately Contact HP technical support by phone to get help immediately to get your Netbook fan replaced and serviced by an authorized HP Certified Engineer
You can also check your warranty here to check the status of the guarantee
Hope this helps, for other queries in response to the post and feel free to join us again
* Click on Thumbs Up white on the left to say thank you *.
Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.
Thank you
K N R K
Although I am an employee of HP, I speak for myself and not for HP
-
HP G72 - c55DX Notebook PC error 303
My hard drive is a failure and I'm looking to upgrade. What is the max GB HDD laptop computer can have? Serial number: 5CB0483W0V. Product #: XZ218UA #ABA. I have my recovery CD.
Hello
You can go up to a maximum 1 TB HDD - one appropriate example can be seen at the following link.
http://www.crucial.com/store/modelpart.aspx?model=HP%20G72-C55DX&IModule=ST1000LM024
Kind regards
DP - K
-
HP G61 - 410SA Notebook keyboard errors
Hello
Bryan wrote:
Thank you, could I do it myself?
Yes.
You'll first get a replacement keyboard. (amazon.com or ebay .amongst other)
Here's a link to a tutorial with pictures that shows exactly how do to replace the keyboard to insidemylaptop.com. Follow the tutorial and it must must be a pretty quick job. Be very careful with the Ribbon connector as they are easy to break.
Best regards
ERICO -
HP pavilion dm4-3099se: sometimes no sound when I pass
I have a laptop HP Pavilion dm4-3099se beats edition. Sometimes when I turn on my laptop so no audio from any player. I changed the players but problem not solved. I reinstalled my audio drivers from hp website, but its still occurs. Please help me solve this problem
Hello @emasadkkhan,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.
I read your post about the problem of audio and wanted to help you! I understand that when you start the laptop sometimes, there is no sound.
First of all, try to review the following document that is related to your operating system and let me know how it goes:
HP laptops - no noise or sound distortion from speakers (Windows 10)
Laptops HP - no sound from speakers (Windows 8)
HP laptops - no sound from speakers (Windows 7)
HP Notebook PC - error: No. Audio Device is installed (Windows 8, 7 and Vista)
Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek. In addition, by clicking on the Thumbs up below is a great way to say thank you!
Have a great weekend!
-
Example: Pavilion dv6: F: HP drive defrag tools
I noticed that I am unable to defragment the disk F: to on my laptop HP tools. The computer is running slowly, and I'm not sure if this is the problem. He is currently at 81%. This player can be defragmented? I am running for the same problem that others in which I couldn't analyze or defragment the drive. Thoughts?
Hi Tina,
Welcome to the Community Forum of HP.
HP_Tools is a partition that contains "work programmes" used for the diagnosis of the system.
The partition should be left alone: do not add or remove files from HP_Tools. is the partition, and it should take care of itself.
You don't need to defragment the partition; HP_Tools is not a part of the operating system that has no impact on the speed or slow your computer works during the day-to-day operations the day.
The following document explains the HP_Tools partition and what to do if you have accidentally added files on the partition.
HP Notebook PC - error: not enough disk space. You run lack of disk space on HP_Tools (Windows 7)
Additional help on performance and maintenance:
Improving the performance of the system without adding memory (Windows 7)
When you see a post that will help you,
Who inspires you, gives a cool idea,
Or you learn something new.
Click the 'Thumbs Up' on this post.
My answer-click accept as Solution to help others find answers.
-
HP_TOOLS (E) is almost full
I get notification that the HP_TOOLS (drive E :) is almost full. When I go to check it out, I realize I have two backups here. I got my dad's computer. Backups say 'Rob - HP' and the other 'Alex-HP. The 'Rob - HP", a last change in 2012, and mine was in September. If I don't need my father, "Rob - HP", could I just delete it and keep mine? Anything on the computer mess up because of this?
Yes, you can delete the folder. You should not store your backup in the tools partition. Consult the following links depending on the operating system you are using for more information and next steps.
HP PC - error: not enough disk space. You run lack of drive on the recovery (Windows 8) space Recovery disk space messages? The recovery partition displays this message if it is used. You should not use the recovery partition to store files. HP PC - error: not enough disk space. You are running low on recovery (Windows 7) disk space Recovery disk space messages? The recovery partition displays this message if it is used. You should not use the recovery partition to store files. HP PC - error: not enough disk space. You are running low on recovery disk space (D (Windows Vista)) Messages of disk space on the D: drive? The recovery partition displays this message if it is used. You may not use the recovery for the storage of files. HP Notebook PC - error: not enough disk space. You are running low on HP_Tools (Windows 7) disk space Messages of space in HP_Tools? The HP_Tools partition displays this message if it is used. Do not use the HP_Tools of the file storage partition. -
Data HID has stopped working message?
I have a HP Touchsmart PC running Vista Ultimate 64. Whenever I use the 'plug and play', I have this message: data HID has stopped working. Does anyone have any suggestions?
Lester stone, HelliwellM & imdangerous,
There is a whole discussion about this issue, as well as several different patches according to your particular devices, the web site HP here:
HP Notebook PC - error: HIDData.exe has stopped working
http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01712518&cc=us&DLC=en&LC=en&JumpID=reg_R1002_USENThere is also a download here, which has been helpful in some of these situations:
Rollup cumulative update for USB in Windows Vista Basic components
http://support.Microsoft.com/kb/941600/Let us know if you need more assistance.
Thank you
Gloria
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
cannot change windows theme of beats theme, rather goes Classic!
Portable mode: Envy 14 1260se beats edition, windows 7-64 bit, graphics card: ATI mobility radeon HD 5650 graphics card
So basically I had to change my hard drive and so I bought a hybrid hard drive, so I had to install windows and all my drivers manually, it took me a lot of time! I posted twice about my problems, just in case, here is the links:
http://h30434.www3.HP.com/T5/notebook-hardware-e-g-Windows-8/smart-check-issue/m-p/2337361#M89813
I had a slight problem in my graphics card driver installation, but finally I managed to do it. But now I am facing a problem which I have no idea how to solve. After you download stardocks my colors, I applied the theme beats and it worked and everything worked very well. However once I turned off my laptop and he turned, rather he returned to classic and after that every time I used the "stardock my colors change the theme of beats, he returned to the basic mode. Once I reinstalled the program stardocks and then it worked again but after that I restarted my laptop, same thing happened again. I don't know if the problem is due to my graphics card or battery power option, I don't know!
It took me a long time to install windows and all, and this little problem is really annoying!
Thank you, Aria!
In fact I think I found the problem. So basically I have two drivers for my graphics card, one intel and the other is ATI. After you install windows, driver intel has been included in the windows updates and so it has been installed and then I installed stardocks. If the problem is that I installed stardocks before I installed the ATI driver and so whenever I tried to change the theme aero for bat theme, he went to the base. Maybe that was the reason why there was not enough memory in the graphics card, I don't know. Once I used the "difficulty it'tool to see if there is any problem with the aero themes and the error I had was that the aero theme is not supported with the type of graphics card I have."
So what I did was really simple. First I made sure that the latest versions of my graphics cards are installed and then I uninstalled and reinstalled stardocks. It worked! Now the theme of beats is applied and everything works fine! So relieved now
-
Hello
I use a HP ENVY 17-j005tx Notebook PC with the latest installed Windows 8.1.
Whenever I start my computer, I get the following pop-up message:
"AccelerometerSt.exe - system error - cannot start the program becaue mfc110u.dll is missing on your computer. Try reinstalling the program to fix this problem. »
I don't know how to fix this? There are a lot of questionable research sites that offer downloads for these "missing files" but I'm sure that's not the solution.
Could someone possibly offer me some advice of bette?
Thank you in advance.
Hello
The missing dll is part of HP 3D DriveGuard - you can download and reinstall this software from the following link.
http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63786.exe
Kind regards
DP - K
-
How to solve an error "HDD 1 (301)" on my HP Pavilion Dv7 notebook PC
HP Pavilion Dv7 Notebook Pc with OS! Windows 7 Home premium 64-bit.
Error message:-hard drive 1 (301) - it sounds like there might be a malware
Virus on it. 2012 on the laptop with me AVG Internet Security. I do not know
The guys at the shop where I bought it says that I must not update the laptop
software and drivers to many.
Hard disk 1 (301) is a hard disk failure. This means that the hard drive needs to be replaced.
You will need get a new hard drive and install it, then you will need to reinstall the Windows operating system using the HP recovery media. If you are in warranty, HP will send you replacement parts by your warranty conditions.
If you are out of warranty, you will need to buy a replacement hard drive, and then call HP to order the specific recovery HP for your portable media.
The number of American support is 1-800-474-6836.
I'll be happy to answer any additional questions or provide additional information if you want to replace it yourself. It is not too difficult. -
I have recently upgraded to Windows 10 and since then, I received the following message through a game: "display Intel HD Graphics driver Driver for Windows 8 (R) stopped responding and has successfully recovered."
I checked my graphics driver and it says that it is up-to-date. I tried installing the latest drivers for my laptop model (according to the HP drivers page), December 15, 2015, installed without a problem, but no version has not fixed the problem. An error message appears when I try to install the March and April, 2016 versions of graphics drivers, claiming that they are not compatible with my computer.
I also tried the Intel and HP driver update utility and told me that my drivers are up to date. However, when I look at the properties of my Intel(r) HD Graphics Family in Device Manager, I noticed that information on the events tab says: "peripheral PCI VEN_8086 & DEV_0A16 & SUBSYS_227E103C & REV_0B\3 & 11583659 & 1 & 10 still requires the installation."
I don't know what needs update on my computer or if this driver is incompatible with Windows 10 and there is not yet an upgrade? Advice or opinions would be appreciated!
My computer model is the 15-p050ca HP Pavilion Notebook PC (ENERGY STAR) model #: G6U13UA #ABL and the graphics driver is version #: 10.18.15.4279
I went back to 8.1 for Windows and ran the store several times and then reinstalled Windows 10.
I watched the graphic version installed and version 20.19.15.4331 dated dated 18 November 2015, but he still claimed there was an update of the graphics driver. I tried the update and it was version 10.18.15.4279 dated August 2015, which was the same version that was installed when I had problems (and the same version on the HP website), then I went back to the 20.19.15.4331 version.
I tried all the graphics drivers listed for my computer on the HP support page and again, I had the same problems with them as I had before (either claim that my computer has no minimum requirements or my graphics driver crashing).
With the current version (20.19.15.4331), my graphics driver has stopped at least for now crashing, but I assume that this is not a specific driver HP and is only based Intel? If so, I recommend HP glance on the issue, I've had if they claim that these drivers are supposed to work for my computer when my computer is, in fact, not accept them.
Maybe you are looking for
-
Tecra M5 suspended at the time of the switch mode sleep after update Bios 3.2
I bought a new Tecra M5 - 104. February 6, 2007Toshiba Assist button or the presentation button worked. After trying everything I tried a Bios upgrade, found and installed 3.20 Still buttons don't work and now Hibernate and standby does not work eith
-
HP 14 d008au: hp 14 d008au drivers wifi for windows 7 ultimate (64 bit)
can you give me links where I can download wireless drivers for hp 14 d008au (windows 7)? Thank you
-
HAVE A NEW MACBOOK PRO AND I AM LOOKING FOR THE ADDRESS BOOK THAT I SEE WHEN I GOOGLE BUT CAN'T FIND HOW THE LAUNCH OR IF IT IS AN APP. I WANT TO BE ABLE TO EXPORT PAGES, ETC., TO PRINT A GROUP OF LABELS. ANY HELP OUT THERE LIKE CHRISTMAS IS COMING
-
How to use my webcam in my computer
Webcam is build my computer
-
Dynamic action does not not on the first attempt to load page. Work after refreshing the page
4.2.1HelloI have a page with a list of selection Order_id and a display _item Product_name. There is action dynamic PL/SQL that fills the element displayed when the order_id is changed. The problem is that when I opened the page for the first time,