Error 303 and the computer is slow!

So I played a light game that my laptop can run 200 fps, but when I stopped playing, I restarted my computer and startup has been slow extreme... I have spent 7 from Windows to Ubuntu, and it boots in 15 seconds, but now in 2-5 minutes! I did test drive and it stopped at 61% and error gived 303. What this means, and this makes it my computer slow for no reason, if this means that the hard drive is broken without reason, that I have to send my computer HP or can I move the HDD without losing the warranty? And I forgot, the Compaq Presario CQ56-116SO computer. Help me, im very worried my computer, because if I send HP this laptop I'm afraid they care that the OS is changed, or do you guys recommend me installing Windows before hard drive breaks down complete? I mean I can use the computer, but it is much slower than normal.

lol I thread on ubuntu Finnish forum and they said, it is fixed in 10.04, but im waiting for the response from HP and I hope they send the replacement of the hard disk, if they send, I use windows for a while. D and in my old laptop I had 9.10 and it never broked hard drive, he was connecting Ubuntu 9.10 to--> 11.04 and again good job, I'm sure that Linux is not a problem, if my old laptop (HP Compaq 6715 s) it runs well without hard disk failure.

Tags: Notebooks

Similar Questions

  • Issue to receive the error message "the system has recovered from a serious error" while working on the computer and the computer restarts automatically.

    Original title: The system has recovered from a serious error-

    The system has recovered from a serious error-

    When you work in windows xp home edition, whenever this programe message and stop running and some auto restart machine.

    What is the solution for this?

    Hi Sandeep,

    Thanks for posting your question in the Microsoft Community forum.
    It seems that you have a problem with the error message "the system has recovered from a serious error," while working on the computer, and the computer restarts automatically.
    I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
    I may need a few more details to better understand the issue.
    Method 1: I suggest following the steps listed in the article and check if it works.
    Error message: the system has recovered from a serious problem

    Method 2:
    I suggest you analyze your computer by using the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

    The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
    Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
    Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.
    You can see the article for more information:
    A "System has recovered from a serious error" message after every restart.

    Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

  • Something seems to be continually downloading in the background, and the computer is so slow. What can I do to fix this?

    How to configure startup programs

    Something seems to be continually downloading in the background, and the computer is so slow, it is booting?

    On Saturday, may 5, 2012 12:58:21 + 0000, joodZO wrote:

    Something seems to be continually downloading in the background, and the computer is so slow, it is booting?

    Since the very little information you provided, I do not know why
    He runs slowly. But two points:

    1. first of all, note that you should be concerned all the programs
    starts automatically, not only those who enter in the system tray.
    Not all the programs auto-start manifesting by an icon in the
    Status bar.

    On each program, you don't want to automatically start, check its
    Options to see if he has the choice of not start (make sure you)
    Indeed choose not to run, not just a "don't show icon.
    Optional). Many can easily and better be arrested like that. If that is not
    work, run MSCONFIG from the start. Run the line, and then click the Startup tab.
    Uncheck the programs that you do not want to automatically start.

    However, if I were you, I wouldn't do it just for the application of
    the minimum number of running programs. Despite what many people say
    You should be concerned, not with the way that a lot of these programs
    you run, but who. Some of them can degrade performance severely, but
    others have no effect on performance.

    Don't stop all programs to run willy-nilly. What you need to do
    is to determine what each program is, what its value is up to you which
    the performance cost is its running all the time. You can try
    Internet search and ask questions about the details here.

    Once you have this information, you can make a smart informed
    decision on what you want to keep and what you want to get rid of.

    2. the computer running slowly is very often due to a malware
    infection. What anti-virus and anti-spyware programs do you run?

    Ken Blake, Microsoft MVP

  • error 1321: NTauthority or Services and controller app sez he has a problem and the computer shuts down

    sez no authority trying to run AVG or Malwarebytes - every 1/2 hour or if some "prog system? NTauthority or Services and controller app sez he has a problem and the computer shuts down

    Hello

    • What is the full error message?
    • What were the changes made to nfore this question?
    • What exactly do you mean by "no authority running avg or malwar bytes?
    It's a possibility that there is a startup program that is launched with a command line and it appears.
    You need to perform a clean boot to find the program that is causing and then disable or remove.
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353/en-us
    Note: When you have finished troubleshooting, proceed as explained in the article to reset the computer to start as usual.
  • an error message appears indicating the pc has a problem and the computer shuts down

    an error message appears saying the pc has a problem and the computer shuts down.

    What do you do when this happens?  It is the way in which computers to protect the components of your computer.

  • Error on restart the computer - 'display driver nvlddmkm unresponsive and was retrieved successfully.

    Original title: diver video card problem.

    Hey there,

    I had a problem with my NVIDIA 7100GS video card driver, because I did an update 04/11/2010.

    the problem starts after rebooting my computer, the screen has crashed and a massege displayed saying "display driver nvlddmkm stopped responding and has successfully recovered" that is of course after frozed of the screen in black, then blue screen appears and the computer restarts.

    I've logged in safe mode and it worked fine, I guess it did not work on the graphics card, I use since I checked it using command "dxdiag" where a massege notavailable showed. However, I rebooted to new then vista automatically downloaded and istalled the pilot, and once again its crashed.

    I downloaded and installed newest dirver for my map on the NVIDIA site screen, however, it would not solve the problem.

    Some have said that it's a ram problem, others said his heat. I don't know that I'm not going to buy a new card.

    so any help will be great.

    Thanks in advance.

    Hello

    It is a known issue with Nvidia graphics cards. You can follow the steps mentioned below:

    Step 1:

    Download and install the update from the link below:
    http://support.Microsoft.com/?kbid=938194

    If the problem persists, go to step 2.

    Step 2:

    Start in safe mode and do a system restore to restore the computer to an earlier point in time before the problem started.

    Check out these links for more information about how to perform a system restore:
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
    http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

    If nothing helps, so please get in touch with support for Nvidia to get help.

    You can also ask your question on the Nvidia Forums:
    http://forums.nvidia.com/

    Kind regards
    Afzal Taher - Microsoft technical support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Hello, the following problem, I use a PC, can not use Photoshop, you get the text following error message on the computer-Adobe Photoshop CC 2015 has stopped working "close the program". have uninstalled and installed a number of times, but the CC2015 wil

    Hello, the following problem, I use a PC, can not use Photoshop, you get the following error message on the computer-Adobe Photoshop CC 2015 has stopped working " ", "the program '. '. have uninstalled et installed a number sometimes but the CC2015 does not start anyway. Soren

    Please see:

    Re: adobe photoshop cc 2014 has stopped working in windows 8

    Re: Photoshop CC 2015 has stopped working

    https://www.YouTube.com/watch?v=0OUdIZT7C2E

    I hope this helps.

    Concerning

    Megha Rawat

  • Error: 0xc000012f and the KERNEL DATA PAGE FAULT

    My son has a laptop of game.  Since last week, he experienced extreme problems.  A constant if the following errors: 0xc000012f and the KERNEL DATA PAGE FAULT.  Although I'm not technologically savvy, I tried the obvious in running virus scan and visiting different communities for troubleshooting tips.  When you run the antivirus (paid service) analysis, the system hangs and the system restarts.  I attended ASUS website in the hope of getting more advice than to have to provide access to the laptop of my son to a technician who gave me some insurance for the better part of 45 minutes that he help and troubleshooting problems.  He highlighted a very detailed chart of downtown action (reliable?), which looked pretty serious.  Suffice it to say, the conversation ended when he asked a one-time fixed fee of $200.  When I refused, he went to stop everything.  I would simply like to take any action that will further damage the laptop of my son. I paid $3K for this system.  Is someone can you please help me solve these problems?  I was going to buy a registry cleaner but was informed in an online community chat room not to do so that these products are not reliable.  Thank you all in advance for your review and taking the time to help me.

    Original title: need assistance immediately please.

     We need the log files themselves (called a DMP files) because they contain the only record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.


    Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found here

    If you have any questions regarding the procedure, please ask


    I find the files DMP prayed and tried their zip.  I received the following: file not found or no read permission.

    I took it to a repair shop for yesterday I had to argue that these issues were well beyond my skill level.  The owner of the store insisted that the 'hard drive' was "fried".  It was agreed to replace the necessary parts (gave me a "Crucial - M4 Solid State Drive - 128 GB), this is the info on the box, to replace my 750Go son.  He said that, even if was less "room" it would "fly".  The original price was $ 200 and climbing!  Give me the question my faith in humanity at this time.  Is not relevant to the prey on someones lack of knowledge.  You and the other hand, all those who try to make a difference... who are trying to help is welcomed.  I wish offered troubleshooting would come to maturity.  Nonetheless, I humbly thank you for your support and follow-up in this case.

    I took it to a repair shop for yesterday I had to argue that these issues were well beyond my skill level.  The owner of the store insisted that the "hard drive"was"French fries".»  It was agreed to replace the necessary parts (gave me a "Crucial - M4 Solid State Drive - 128 GB - INFORMATION ON LISTED), to replace my 750Go son.  He said that even if it was less "room" it would "fly".  The original quoite was $ 200 and climbing! Give me the question my faith in humanity at this time.  Seems very inappropriate to prey on someones lcak of knowledge.  You on the other hand and those who try to make a difference... who are trying to help, should be commended.  I wish offered troubleshooting would come to maturity.  Nonetheless, I humbly thank you for your support and follow-up in this case.

  • I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion went well, I restarted the computer, I get a blue screen and the computer restarts

    I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion was going well until I rebooted the computer and go to page window showing all the icons that I get a blue screen and the computer restarts its self and does not stop. How can this be corrected?

    Hi KevinRy,

    Welcome to the Microsoft Answers site!

    Unplug all external devices.

    Try to start in safe mode. If you can start in safe mode, and then do a system restore to restore the computer to an earlier point in time.

    Change the recovery settings to disable automatic reboot, if you are able to boot up to the desktop computer:

    1.

    Right-click my computerand then click Properties.

    2.

    Click the Advanced tab.

    3.

    Under Startup and recovery, click settings to open the Startup and recovery dialog box.

    4.

    Clear the automatically restart check box, and then click OK many times necessary.

    5.

    Restart your computer so that the settings take effect.

    Now, when you are going to close and a fatal error occurs, you will see at least and it won't cause an automatic restart.

    Please reply back with the error message you get because it helps us to resolve the error.

    Kind regards
    Amal-Microsoft Support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • any online game played and the computer turns off after 3 minutes

    It's killin me. I tried several other games online. Download everything fine and I can access the game without problems. Having been in the game for about 3 minutes, the whole computer just turns off.

    Hey Noel2112,

    Welcome to the Microsoft Answers Forum!

    We would like to get a better understanding of this issue so that we can better help you.

    ·         What version of the operating system you are using (Windows Vista or XP)?

    ·         Since when are you facing this problem?

    ·         Has nothing changed on your system just before that this problem has occurred - all new hardware devices installed?  New software or updates installed?

    ·         What browser do you use?

    ·          You get an error message until the computer shuts down?


    Step 1:

    a. uninstall if a third party Flash Player installed.

    b. Uninstall and reinstall the Flash Player.

    If you are using Internet Explorer, follow the steps below:

    Step 2:

    1 optimize Internet Explorer.

    2 see article below, which speaks of the optimization of Internet Explorer:

    http://support.Microsoft.com/kb/936213

    You can try the Fix tool mentioned in the article to automatically perform the steps for optimization of Internet Explorer.

    Step 3:

    1 reset the settings of Internet explorer if you still have the problem.

    2 here is a link to reset the Internet Explorer settings:

    http://support.Microsoft.com/kb/923737

    Try the tool mentioned in the KB article fix to automatically reset the Internet Explorer settings.

    I hope that the information above helps you.

    Kind regards

    Manasa P-Microsoft Support.

  • Outlook Express 6 problem: send an email I get an error message and the email is not put in the sent items folder

    Outlook Express 6, Windows XP SP 3

    Problem: send an email, I get an error message and the email is not put in the sent items folder while the email (and attachments, if any) are successfully delivered to the recipient.

    The full error message is always useful, but I'm sure you have damaged dbx files.

    Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.

    Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

    In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

    With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.

    After you're done, followed by compacting your folders manually while working * off * and do it often.

    Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

    General precautions for Outlook Express:

    Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

    Information on the maximum size of the .dbx files that are used by Outlook Express:
    http://support.Microsoft.com/?kbid=903095

    Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
    http://www.oehelp.com/OETips.aspx#3

    Why you don't need your anti-virus to scan your email
    http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

    Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.

    Compact often as specified above.

    And backup often.

    Outlook Express Quick Backup (OEQB Freeware)
    http://www.oehelp.com/OEBackup/default.aspx

  • NEED HELP WITH SERVICE PACK 3. After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. ,

    NEED HELP WITH SERVICE PACK 3.  After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. , but it of although he gets, he keeps countdown to restart and reboots and restarts, over and over again, never reboots, same screen. my computer won't let me out this screen even after I turned off the computer and turn it back on, I get the same screen. the only way I can get out of this is to erase my computer everything and bring it back to factory, right out of the box, this big headaches. Thanks for anyone who can help me. PS. Keep the answers in simple terms please.

    Hi BSRC$, in stock

    1. You have security software installed on the computer?
    2. You receive an error message when you restart the computer?

    Reinstalling Windows XP to the factory setting would not be the first option.

    It is possible that some third-party programs or the services installed on the computer interfere with the installation of service pack 3.

    I suggest that you try to uninstall service pack 3 from the computer by using the recovery console and subsequently ask the article below for what to do before installing the service pack 3on the computer.

    How to remove Windows XP Service Pack 3 from your computer

    http://support.Microsoft.com/kb/950249

    Steps to take before you install Windows XP Service Pack 3

    http://support.Microsoft.com/kb/950717

  • Outlook express 6.0 may send, but receives an error, unidentified, and the message remains in the Outbox

    Outlook express 6.0 may send, but receives an error, unidentified, and the message remains in the Outbox

    You have apparent dbx file corruption.

    Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.

    Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

    In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

    With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.

    After you're done, followed by compacting your folders manually while working * off * and do it often.

    Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

    General precautions for Outlook Express:

    Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

    Information on the maximum size of the .dbx files that are used by Outlook Express:
    http://support.Microsoft.com/?kbid=903095

    Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
    http://www.oehelp.com/OETips.aspx#3

    Why you don't need your anti-virus to scan your email
    http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

    Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.

    Compact often as specified above.

    And backup often.

    Outlook Express Quick Backup (OEQB Freeware)
    http://www.oehelp.com/OEBackup/default.aspx

  • Get the blue screen and the computer shuts down.

    Suddenly, I got blue screen and the computer will stop. File that describe the problem

    c:\Windows\Minidump\Mini020611-01.dmp

    Anyone know the cause of the problem? Any security breach?

    Hello

    Security is not usually a problem with a BSOD but it can be. Are you running effective
    antivirus/antispyware/security programs?

    ------------------------------------------------

    Check this thread for more information using BlueScreenView, MyEventViewer and other methods
    to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

    http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive to upload collected files
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    -------------------------------------------------------------------------

    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    (also Windows 7)
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    ===========================================================

    Check out these utilities to see if information may be collected:

    It is an excellent tool for displaying the blue screen error information

    -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
    and displays information about all accidents of a table.
    http://www.NirSoft.NET/utils/blue_screen_view.html

    -------------

    MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
    time of the BSOD to provide more information about the possible cause - see TIP.

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
    Set it for a bit before and after the time of the BSOD.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    ------------

    AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
    application goes down has occurred in your system. The information breaks down is extracted from the .wer
    the files created by the Windows Error Reporting (WER) of the operating system component of each
    time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
    text/html/csv/xml file.
    http://www.NirSoft.NET/utils/app_crash_view.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Parental control: I am the admin of the computer and the computer won't let me access the list allow and block my child's account

    I am the administrator of the computer and the computer won't let me access the list allow and block my child's account.  I'll bring my parental control password, click on my childs account, put parental controls, go to web filter and click on block some web sites, click on edit the allow and block list and the computer tells me that it is not able to make changes to parental controls settings and see the system administrator if the problem persists.

    Hi Ranw,

    ·        What is the error message when you try to change parental controls?

    ·        Have you been able to make any changes on this computer from your account earlier?

    You can follow the steps below and check if you can make changes to the parental controls on your computer.

    Step 1:

    Disable UAC (User Account Control) and check the result. Access the link below and follow the steps to disable UAC.

    http://Windows.Microsoft.com/en-us/Windows-Vista/turn-user-account-control-on-or-off

    Note: You must restart your computer when you enable or disable UAC. Change levels of notification does not require that you restart your computer.

     

    Step 2:

    I suggest to create a new administrator account and log later in the new administrator account, try to set parental controls and check if it works.

    Create a user account:http://windows.microsoft.com/en-US/windows-vista/Create-a-user-account

    Check out the link below to check if the parental control is properly set:

    http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-parental-controls

    I hope this helps. Let us know the result.

    Thank you and best regards,

     

    Srinivas R

    Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • P1C61EA #ABZ: problem Audio (driver?)

    Hi, yesterday I updated to W10 anniversary. After that, my PC has a lot of audio problems, include the bass too metallic. So after reading in this forum I've updated the driver (sp74867), but doesn't my audio control (F6 key on the keyboard) and the

  • Cannot set external LCD 1080 x 1050 resolution - Satellite Pro M40

    Hello I just bought a Samsung LCD 226BW screen and my Satellite Pro M40 (PSM46E) makes me crazy. First of all, I could put the display driver in 1080 x 1050, but suddenly dissappeared option. I reinstalled the display driver, but no luck. He even got

  • Mysterious owner PC connected to my Mac?

    I have a Macbook pro, Iris 1536 MB Intel 8 GB 1600 MHz DDR3 2.6 GHz Intel Core i5 This owner-pc is connected to me time-to-time. Sometimes, I just check my finder and its there. Sometimes it is not. If someone is logged on to my computer? Recently my

  • Lenovo IdeaPad Z570 WiFi card upgrade question

    I decided to upgrade WiFi modem to my laptop at the more recent. So, I checked the hardware maintenance manual for my laptop for the necessary equipment and discovered that the best option would be "WLAN card, 802.11a/g/n & 802.16e, Intel 6250NX MOW

  • Error when create control LabVIEW FPGA CompactRIO

    I have error when you try to create a new model of LabVIEW FPGA CompactRIO control project. I tried with LabVIEW 2014 and 2014 SP1 update. This error always occurs. Please help me with this. Kind regards Thang Nguyen