HP Laser Jet Printer Setup error

Similar Questions

• Where can I download a user guide for a HP laser jet printer p2055dn?

  Where can I download a user guide for a HP laser jet printer p2055dn?   [email protected]

  Hello

  You may not be able to find the manual for it, but it's the P2050 series Manual:

  http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c01461642/c01461642.PDF

  Kind regards.

• HP Color Laser Jet 2605dn 49 error code

  I have the HP Color Laser Jet 2605dn. recently when I launched a print, a 49 error appear on the screen and the printer stops and restarts. He then "Print Document" but nothing prints. Anyone know what is the solution to this problem?

  Thank you

  Hello

  Hope this will help you...

  http://printertechs.com/tech/error-codes/error-codes-20-49.php

  Concerning

  GT4U

• LASER JET PRO M402N: ERROR

  I RECENTLY BOUGHT A HP LASER JET PRO M402N PRINTER AND A DUNGEON 55,0602 ERROR. IT ME SAYS TO TURN OFF PRINTER AND THEN TURN ON, BUT I DID THAT SEVERAL TIMES AND IT STILL GIVES THE ERROR.

  Hello @STEVEP2

  You can try this

  A.Eteignez the power supply using the power switch and then wait at least 30 seconds.

  b on the power and waiting for the product to be initialized.

  2. If you use a surge protector:

  power off the printer.

  b the surge protector.

  c.Plug the product directly into the wall outlet and turn the product market.

  If you still see the same error on the screen, you can call 888 447 0078 ext 336 for the United States and Canada for a call of guarantee as mentioned that the controller DC PCB Assembly needs to be replaced

• HP Laser Jet 4250 printer: 2 computer connected to a HP laser jet printer

  I have a HP Color laser jet 4250 printer.  It has a USB HP (not the typical style of the USB) and a compatible port IEEE 1284 b also.  Can I connect 2 computers using these two ports without hurting the printer?  If so, the two computers can print to the printer and have the printer queue work?

  Hello

  It is a very old and very good printer. How can you find a job for parallel port is another story, but the statement, you can use the USB connection or parallel to share. It has an embedded print server, HP Jetdirect Fast Ethernet integrated so my suggestion: it allows to connect to more than 1 computer:

  

  Kind regards.

• How to get a hp 4600 Color Laser jet print on a vista or Windows 7 64 - bit OS PC which does not have a parallel port connection?

  My hp 4600 color Laser Jet uses a parallel cable to connect to a Windows PC. When I had XP as the OS it worked fine. But now after the upgrade to Vista or Windows 7 64-bit OS it will not work and my PC does not even recognize it when it is plugged into the PC with the parallel to USB cable that worked so well before. So, what should I do to get the PC to recognize the Hp 4600 and have it printed again as before? (My first plan is to try to get the printer to work by hooking up through Wireless. Does anyone know if it will work? I'll answer my own question, if it does. Wish me luck! (Thank you!)

  According to the HP support site, there are drivers available for Vista and Windows 7 If you're lucky it. Download the appropriate drivers for your computers. According to the information of product from HP, this printer can be connected directly to the network by an ethernet cable. I don't see where it has wireless capability, but in any case ethernet is preferable for printer connections if possible.

  Connect the printer directly to your router or switch connected to your router and assign a static IP address outside the range the router DHCP. Then, install the drivers that you got from the HP website for your operating system.

  MS - MVP - Elephant Boy computers - don't panic!

• HP Laser Jet professional P1102w - error not connected

  Hoping someone out there can give me some advice!

  I had the same printer for years and it has worked reliably until yesterday, when I suddenly started getting a "not connected" and "Printer offline" error messages when you try to print. I wonder if my maid accidentally pressed something? I tried all the usual unplug, turn on/off the printer and computer, and connections.

  Printer is connected to the last Apple Time Capsule and goes up to Mac (current 10.8.4) via my network. Worked fine until yesterday. When I print a free text through the printer, the Network Information section reads "status: not connected. Everything else with Time Capsule works fine: I'm connected to the Internet through Time Capsule, managed to go up to Time Capsule, etc..

  Any ideas on how to fix? Thank you!

  Hello

  Try it reconnect to your network using WPS listed for Time Capsule below:

  https://discussions.Apple.com/message/21555447#21555447

  Once the Airport utility, waiting for a Wi - Fi printer on the printer control panel, press the Wireless button ( ).

  The wireless light starts to blink.

  Wait up to two minutes for the printer establishes a connection with the airport database.

  Shlomi

• PIXMA Pro 100, printing setup error

  I am new to printing, I just got my Pixma Pro and so far have had terrible results.  1/10 times I get beautiful prints, the rest are terrible, faded, and as they have a gray film on them.  I think that its either a management or color paper management problem. I try to use 8.5 "x 11"Canon Pixma Photo"with finishing mate.  I print with Photoshop. I have the same problem if I click on Photoshop color handle or manage color printers, but prints nice 1/10 has been made manually setting the document to "glossy" under the menu print settings in Photoshop CS6 instead by selecting Matte is the obvious choice.

  When I chose Photoshop treats color management I get prints of same gray no matter what printer profile I select. Although it seems more logical to choose matte Canon Pro - 100 3 paper photo because it's what I use, once again nice 1/10 prints have been achieved selection Pro 3 Platinum photo paper.

  I don't understand how it works.  The picture I am trying to print is here, green and nice blue. http://www.Flickr.com/photos/27816471@N06/9076033417/in/set-72157634198994950 it seems gray and washed out when I print, sort of like the printer is 1/2 more ink, but he says is not.  Black and gray are good.

  What should I do?  I know its operator error, but I can not re - introduce one of the environment to get decent prints of this, so I'm considering junking or return. really disappointed.

  He is a. (at least on the matte premium.) was a packet of information about 3 x 4 in plastic sleeve, in that the paper is conditioning?

  Should be slightly whiter and not quite as calm as the side back side printing. Very subtle.

• HP LaserJet Pro 400 M401dn: Printer setup error

  I use this printer for these past two years perfectly, but last week when I changed my laptop start to become more error during installation. My laptop machine specs are also less

  

  Error message

  

  I tried several ways by downloading the latest version of the driver from the HP Web (http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5096261)

  I also try to install optional Smart Install

  Please help me

  Wakeel

  To make this real simple.  Go to the printer and to the control panel of the printer print a config page or network config which will give you the ip address of the printer.  Now on your computer, go to devices and printers and choose the item add printer, then local printer and on the next page, click on the create a new port and in the drop-down menu, choose standard tcp/ip and then click Next.  Type the ip address of the printer and make sure the box to query the printer and automatically select driveris checked and then click Next.  The computer will find the printer and load the required drivers and set up the printer for you.  If this does not work, report back with what happened during the installation (error messages, etc.).

• Printer Setup error "specified port is unknown.

  Original title: printer drivers

  I'm trying to install a printer on my lap top. Starts the load down, but I get a 'found new hardware wizard' screencalled the body, I get an error report "specified port is unknown." Can you help me

  Hello
   
  1. What is the brand and the name of the printer of this printer?
   
   
  If you use the HP printer to refer:
  HP Officejet 6210 all in one Error Message
  http://forums11.itrc.HP.com/service/forums/QuestionAnswer.do?admit=109447626+1289544255115+28353475&ThreadId=976467
  
  Or you can contact the manufacturer of the printer to help on the installation of the printer by using a different port and check.
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• 643 persistent network printer setup error

  I'm unable to install a network printer on a laptop running Windows Vista Home Premium. The error is 643 x. I uninstalled and reinstalled the NET framework 3.5 SP1 and updates. Printer installed on a laptop running Windows 7.

  Hello

  1. What is the serial number and model of the printer?

  2. How do you try to install the driver?

  3. you use a downloaded driver or CD to install printer?

  I suggest you to try the steps in the following Microsoft article and check if this may help.

  Error message when you try to install a WSD printer on a Windows Vista-based computer after installing first attempt fails: "impossible Operation completed (error 0 x 00000643).

  http://support.Microsoft.com/kb/944960

  See also the following Microsoft article.

  Troubleshoot network printer:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  I hope that helps!

• Laser Jet P2015d led error

  Hello

  how it is possible to solve the error showed by the image?

  Thank you

  Stefano

  This fatal error is a fan error. The fan turns on the printer?

• HP LASER JET P1102: Scanner error Laserjet P1102 52.0 Professional

  Hi, I need some help or advice I can't use my printer 3 months when I try to print I get an error message like this "scanner error of 52.0!"

  I want to find a solution for this problem!

  Hi @CAMARAIZ,

  In addition to my post, if you are unable to print the 'Page or report Configuration' there is a hardware problem. Try the hard reset and if the problem persists, contact HP.

  Contact HP for service in all countries except Asia-Pacific.

• jet m1217nfw mfp laser: laser jet printer

  My router is out of Commission. new router has happen but I'm unable to reconfigure the sentence of WPA security. I read that book reloaded the software for noavail any help would be greatly appreciated.

  Respectfully,.

  Bill

  Hi @Manolito9,

  Welcome to the Forums of HP Support! I read your post and see that you need help to install the printer on the new router. I want to help you. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  To set up the printer on the wireless network, please follow these steps:

  Restore the default values of the printers.
  Go to the configuration of the printer, select network settings, select restore default settings.

  Temporarily, connect the USB cable from the printer to the computer.

  Go to start, all programs, HP, Laserjet M1217 and select Wireless Network Configuration.

  Go through the wizard to reset back to the top the wireless.

  Test the printer on the wireless network.

  If you're on a Mac, let me know.

  If you need further assistance, please provide in detail what steps you have taken and the results. Thank you.

• Printer Setup error: insert the floppy

  I have an OfficeJet 4315 AIO, but I've seen this same problem with a number of other HP printers.

  Shortly after the installation of my printer, whenever my computer starts, it displays a message indicating that the printer installation disc must be reinserted to complete the installation of some program components not specified.  I looked on Google and on some sites of HP forum.  I found a lot of information to suggest that the problem is a known bug in older versions of the solution Center HP - research program for a specific version of Adobe Flash. It is not because a more recent version of Flash has been installed; and continuously displays the "insert disk" message accordingly.  I found a fix claimed for this Solution Center.msi (a patch) bug, which does not work for my JO 4315, or at least 3 other printers HP belonged to friends.

  Is anyone out there knows a universal fix for this apparently well known problem?

  Thank you.

  Try to uninstall all the software for the printer.

  Reset.

  Download the latest version of the software for your printer from the "Support & drivers" link at the top of this page.  Do not use the CD for the printer.